Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Organolead trihalide perovskite materials have been successfully used as light absorbers in efficient photovoltaic cells. Two different cell structures, based on mesoscopic metal oxides and planar heterojunctions have already demonstrated very impressive advances in performance. Here, we report a bilayer architecture comprising the key features of mesoscopic and planar structures obtained by a fully solution-based process. We used CH3NH3 Pb(I(1-x)Br(x))3 (x = 0.1-0.15) as the absorbing layer and poly(triarylamine) as a hole-transporting material. The use of a mixed solvent of γ-butyrolactone and dimethylsulphoxide (DMSO) followed by toluene drop-casting leads to extremely uniform and dense perovskite layers via a CH3NH3I-PbI2-DMSO intermediate phase, and enables the fabrication of remarkably improved solar cells with a certified power-conversion efficiency of 16.2% and no hysteresis. These results provide important progress towards the understanding of the role of solution-processing in the realization of low-cost and highly efficient perovskite solar cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A calculation of the group index (n g ) of the mode based on refractive index (n) values obtained by P. Loeper and M. Stuckelberger [22] resulted in ng ≈ 6.”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [22]
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Self-citationLi, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Self-citation
Cited by
Items 401–500 of 1,012
The effect of illumination on the formation of metal halide perovskite films
Ummadisingu, A., Steier, L., Seo, J.-Y., Matsui, T., Abate, A., Tress, W., & Grätzel, M. (2017) · Nature · doi:10.1038/nature22072 · Cited by 311
Nishimura, H., Ishida, N., Shimazaki, A., Wakamiya, A., Saeki, A., Scott, L. T., & Murata, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11008 · Cited by 313
Choi, H., Ko, S., Kim, T., Morin, P., Walker, B., Lee, B. H., Leclerc, M., Kim, J. Y., & Heeger, A. J. (2015) · Advanced Materials · doi:10.1002/adma.201501132 · Cited by 312
Current Density Mismatch in Perovskite Solar Cells
Saliba, M., & Etgar, L. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01642 · Cited by 308
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells
Bu, T., Wu, L., Liu, X., Yang, X., Zhou, P., Yu, X., Qin, T., Shi, J., Wang, S., Li, S., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700576 · Cited by 309
The green solvent: a critical perspective
Winterton, N. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02188-8 · Cited by 307
“2007; Jessop 2011; Leitner et al.”
BackgroundCopper Iodide Based Hybrid Phosphors for Energy‐Efficient General Lighting Technologies
Liu, W., Fang, Y., & Li, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705593 · Cited by 306
Meng, L., Sun, C., Wang, R., Huang, W., Zhao, Z., Sun, P., Huang, T., Xue, J., Lee, J.-W., Zhu, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10520 · Cited by 308
Liu, Y., Yang, Z., & Liu, S. (. (2018) · Advanced Science · doi:10.1002/advs.201700471 · Cited by 305
Li, L., Chen, Y., Liu, Z., Chen, Q., Wang, X., & Zhou, H. (2016) · Advanced Materials · doi:10.1002/adma.201603021 · Cited by 305
Roll-to-Roll Printing of Perovskite Solar Cells
Dou, B., Whitaker, J. B., Bruening, K., Moore, D. T., Wheeler, L. M., Ryter, J., Breslin, N. J., Berry, J. J., Garner, S. M., Barnes, F. S., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01556 · Cited by 304
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Kim, J., Kim, G., Kim, T. K., Kwon, S., Back, H., Lee, J., Lee, S. H., Kang, H., & Lee, K. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03954h · Cited by 305
Chen, H.-W., Sakai, N., Ikegami, M., & Miyasaka, T. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502429u · Cited by 304
Harikesh, P. C., Mulmudi, H. K., Ghosh, B., Goh, T. W., Teng, Y. T., Thirumal, K., Lockrey, M., Weber, K., Koh, T. M., Li, S., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03310 · Cited by 303
High‐Performance Single‐Crystalline Perovskite Thin‐Film Photodetector
Yang, Z., Deng, Y., Zhang, X., Wang, S., Chen, H., Yang, S., Khurgin, J., Fang, N. X., Zhang, X., & Ma, R. (2018) · Advanced Materials · doi:10.1002/adma.201704333 · Cited by 301
Lessons learned: how to report XPS data incorrectly about lead-halide perovskites
Li, C., Zhang, N., & Gao, P. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00574g · Cited by 295
Wang, L., Xue, Y., Cui, M., Huang, Y., Xu, H., Qin, C., Yang, J., Dai, H., & Yuan, M. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915912 · Cited by 298
A low cost azomethine-based hole transporting material for perovskite photovoltaics
Petrus, M. L., Bein, T., Dingemans, T. J., & Docampo, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03046c · Cited by 298
Song, Z., Watthage, S. C., Phillips, A. B., & Heben, M. J. (2016) · Journal of Photonics for Energy · doi:10.1117/1.jpe.6.022001 · Cited by 297
“DMSO is one of the best and widely used additives.(77,86) The precursor solution with added DMSO forms a uniform and flat MAI-PbI2-DMSO intermediate film when spin-coated.”
BackgroundMethodPaek, S., Schouwink, P., Athanasopoulou, E. N., Cho, K. T., Grancini, G., Lee, Y., Zhang, Y., Stellacci, F., Nazeeruddin, M. K., & Gao, P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05353 · Cited by 299
Simplified interconnection structure based on C60/SnO2-x for all-perovskite tandem solar cells
Yu, Z., Yang, Z., Ni, Z., Shao, Y., Chen, B., Lin, Y., Wei, H., Yu, Z. J., Holman, Z., & Huang, J. (2020) · Nature Energy · doi:10.1038/s41560-020-0657-y · Cited by 298
Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review
Ren, G., Han, W., Deng, Y., Wu, W., Li, Z., Guo, J., Bao, H., Liu, C., & Guo, W. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11564a · Cited by 294
Unveiling the Role of tBP–LiTFSI Complexes in Perovskite Solar Cells
Wang, S., Huang, Z., Wang, X., Li, Y., Günther, M., Valenzuela, S., Parikh, P., Cabreros, A., Xiong, W., & Meng, Y. S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09809 · Cited by 292
The role of grain boundaries in perovskite solar cells
Lee, J.-W., Bae, S.-H., De Marco, N., Hsieh, Y.-T., Dai, Z., & Yang, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.07.014 · Cited by 292
“As an antisolvent, toluene is widely used because it does not dissolve the precursor MAI and PbI2 [20,54].”
BackgroundInfluentialPerovskites-Based Solar Cells: A Review of Recent Progress, Materials and Processing Methods
Shi, Z., & Jayatissa, A. H. (2018) · Materials · doi:10.3390/ma11050729 · Cited by 291
Qin, P., Yang, G., Ren, Z., Cheung, S. H., So, S. K., Chen, L., Hao, J., Hou, J., & Li, G. (2018) · Advanced Materials · doi:10.1002/adma.201706126 · Cited by 293
Phase Transition Control for High Performance Ruddlesden–Popper Perovskite Solar Cells
Zhang, X., Munir, R., Xu, Z., Liu, Y., Tsai, H., Nie, W., Li, J., Niu, T., Smilgies, D., Kanatzidis, M. G., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707166 · Cited by 294
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Lead‐Free Hybrid Perovskite Absorbers for Viable Application: Can We Eat the Cake and Have It too?
Liang, L., & Gao, P. (2018) · Advanced Science · doi:10.1002/advs.201700331 · Cited by 291
High‐Quality Ruddlesden–Popper Perovskite Film Formation for High‐Performance Perovskite Solar Cells
Liu, P., Han, N., Wang, W., Ran, R., Zhou, W., & Shao, Z. (2021) · Advanced Materials · doi:10.1002/adma.202002582 · Cited by 294
Lead-free tin perovskite solar cells
Wu, T., Liu, X., Luo, X., Lin, X., Cui, D., Wang, Y., Segawa, H., Zhang, Y., & Han, L. (2021) · Joule · doi:10.1016/j.joule.2021.03.001 · Cited by 291
Chen, W.-Y., Deng, L.-L., Dai, S.-M., Wang, X., Tian, C.-B., Zhan, X.-X., Xie, S.-Y., Huang, R.-B., & Zheng, L.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05286f · Cited by 290
Liu, J., Gao, C., He, X., Ye, Q., Ouyang, L., Zhuang, D., Liao, C., Mei, J., & Lau, W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06780 · Cited by 291
Yang, J., Liu, C., Cai, C., Hu, X., Huang, Z., Duan, X., Meng, X., Yuan, Z., Tan, L., & Chen, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900198 · Cited by 289
Perovskite–Hematite Tandem Cells for Efficient Overall Solar Driven Water Splitting
Gurudayal, Sabba, D., Kumar, M. H., Wong, L. H., Barber, J., Grätzel, M., & Mathews, N. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00616 · Cited by 288
ABX3 Perovskites for Tandem Solar Cells
Anaya, M., Lozano, G., Calvo, M. E., & Míguez, H. (2017) · Joule · doi:10.1016/j.joule.2017.09.017 · Cited by 286
Luminescent films for chemo- and biosensing
Guan, W., Zhou, W., Lu, J., & Lu, C. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00246j · Cited by 287
Shi, J., Gao, Y., Gao, X., Zhang, Y., Zhang, J., Jing, X., & Shao, M. (2019) · Advanced Materials · doi:10.1002/adma.201901673 · Cited by 286
Bi, D., Gao, P., Scopelliti, R., Oveisi, E., Luo, J., Grätzel, M., Hagfeldt, A., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505255 · Cited by 285
Broadly tunable metal halide perovskites for solid-state light-emission applications
Adjokatse, S., Fang, H.-H., & Loi, M. A. (2017) · Materials Today · doi:10.1016/j.mattod.2017.03.021 · Cited by 286
Zhou, Y., Herz, L. M., Jen, A. K.-Y., & Saliba, M. (2022) · Nature Energy · doi:10.1038/s41560-022-01096-5 · Cited by 281
“The subsequent studies were devoted to achieve a near-pure FAPbI3 composition to extend the light absorption while creating compact films with a reduced GB density, and successively led to the device structures shown in regions (5)–(7)6,7.”
BackgroundMethodCarbon-Based CsPbBr3 Perovskite Solar Cells: All-Ambient Processes and High Thermal Stability
Chang, X., Li, W., Zhu, L., Liu, H., Geng, H., Xiang, S., Liu, J., & Chen, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11393 · Cited by 285
Lead-free, air-stable ultrathin Cs3Bi2I9 perovskite nanosheets for solar cells
Bai, F., Hu, Y., Hu, Y., Qiu, T., Miao, X., & Zhang, S. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.04.032 · Cited by 282
Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells
Shin, S. S., Lee, S. J., & Seok, S. I. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900455 · Cited by 283
Self-citationChen, B., Bai, Y., Yu, Z., Li, T., Zheng, X., Dong, Q., Shen, L., Boccard, M., Gruverman, A., Holman, Z., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601128 · Cited by 284
Qiu, L., Ono, L. K., & Qi, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.09.008 · Cited by 286
Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells
Zhao, W., Yao, Z., Yu, F., Yang, D., & Liu, S. (. (2018) · Advanced Science · doi:10.1002/advs.201700131 · Cited by 284
A Review on Scaling Up Perovskite Solar Cells
Li, D., Zhang, D., Lim, K., Hu, Y., Rong, Y., Mei, A., Park, N., & Han, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008621 · Cited by 284
Buried Interface Modification in Perovskite Solar Cells: A Materials Perspective
Gao, Z., Wang, Y., & Choy, W. C. H. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202104030 · Cited by 271
Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5061809 · Cited by 281
Mechanisms for light induced degradation in MAPbI3 perovskite thin films and solar cells
Abdelmageed, G., Jewell, L., Hellier, K., Seymour, L., Luo, B., Bridges, F., Zhang, J. Z., & Carter, S. (2016) · Applied Physics Letters · doi:10.1063/1.4967840 · Cited by 279
Kim, G., Choi, H., Kim, M., Lee, J., Son, S. Y., & Park, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903403 · Cited by 278
Bi, D., Xu, B., Gao, P., Sun, L., Grätzel, M., & Hagfeldt, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.020 · Cited by 279
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Manipulation of facet orientation in hybrid perovskite polycrystalline films by cation cascade
Zheng, G., Zhu, C., Ma, J., Zhang, X., Tang, G., Li, R., Chen, Y., Li, L., Hu, J., Hong, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05076-w · Cited by 278
Conventional Solvent Oxidizes Sn(II) in Perovskite Inks
Saidaminov, M. I., Spanopoulos, I., Abed, J., Ke, W., Wicks, J., Kanatzidis, M. G., & Sargent, E. H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00402 · Cited by 270
PTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review
Wang, Y., Duan, L., Zhang, M., Hameiri, Z., Liu, X., Bai, Y., & Hao, X. (2022) · Solar RRL · doi:10.1002/solr.202200234 · Cited by 277
Yang, B., Dyck, O., Poplawsky, J., Keum, J., Puretzky, A., Das, S., Ivanov, I., Rouleau, C., Duscher, G., Geohegan, D., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03144 · Cited by 277
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Formation of Thin Films of Organic–Inorganic Perovskites for High‐Efficiency Solar Cells
Stranks, S. D., Nayak, P. K., Zhang, W., Stergiopoulos, T., & Snaith, H. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410214 · Cited by 274
Graphene-based materials with tailored nanostructures for energy conversion and storage
Yang, Y., Han, C., Jiang, B., Iocozzia, J., He, C., Shi, D., Jiang, T., & Lin, Z. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.12.003 · Cited by 273
Shape Evolution and Single Particle Luminescence of Organometal Halide Perovskite Nanocrystals
Zhu, F., Men, L., Guo, Y., Zhu, Q., Bhattacharjee, U., Goodwin, P. M., Petrich, J. W., Smith, E. A., & Vela, J. (2015) · ACS Nano · doi:10.1021/nn507020s · Cited by 276
Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency
Seo, J., Matsui, T., Luo, J., Correa‐Baena, J., Giordano, F., Saliba, M., Schenk, K., Ummadisingu, A., Domanski, K., Hadadian, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600767 · Cited by 274
Yan, J., Liu, M., Jeong, Y. G., Kang, W., Li, L., Zhao, Y., Deng, N., Cheng, B., & Yang, G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.010 · Cited by 276
Jiang, C.-S., Yang, M., Zhou, Y., To, B., Nanayakkara, S. U., Luther, J. M., Zhou, W., Berry, J. J., van de Lagemaat, J., Padture, N. P., et al. (2015) · Nature Communications · doi:10.1038/ncomms9397 · Cited by 273
Nickel oxide for inverted structure perovskite solar cells
Ma, F., Zhao, Y., Li, J., Zhang, X., Gu, H., & You, J. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.04.027 · Cited by 268
The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Leijtens, T., Hoke, E. T., Grancini, G., Slotcavage, D. J., Eperon, G. E., Ball, J. M., De Bastiani, M., Bowring, A. R., Martino, N., Wojciechowski, K., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500962 · Cited by 271
Wang, Q., Zhang, X., Jin, Z., Zhang, J., Gao, Z., Li, Y., & Liu, S. F. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00375 · Cited by 270
Zheng, X., Troughton, J., Gasparini, N., Lin, Y., Wei, M., Hou, Y., Liu, J., Song, K., Chen, Z., Yang, C., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.005 · Cited by 270
Zhang, F., Yang, X., Cheng, M., Wang, W., & Sun, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.11.034 · Cited by 270
Juarez-Perez, E. J., Leyden, M. R., Wang, S., Ono, L. K., Hawash, Z., & Qi, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01777 · Cited by 270
Zhang, T., Yang, M., Zhao, Y., & Zhu, K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00843 · Cited by 270
Zhao, L., Kerner, R. A., Xiao, Z., Lin, Y. L., Lee, K. M., Schwartz, J., & Rand, B. P. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00320 · Cited by 270
Luo, J., Xia, J., Yang, H., Chen, L., Wan, Z., Han, F., Malik, H. A., Zhu, X., & Jia, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00036k · Cited by 271
Tavakoli, M. M., Yadav, P., Prochowicz, D., Sponseller, M., Osherov, A., Bulović, V., & Kong, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803587 · Cited by 269
Sun, S., Fang, Y., Kieslich, G., White, T. J., & Cheetham, A. K. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03331d · Cited by 272
Tress, W., Correa Baena, J. P., Saliba, M., Abate, A., & Graetzel, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600396 · Cited by 270
Ke, W., Mao, L., Stoumpos, C. C., Hoffman, J., Spanopoulos, I., Mohite, A. D., & Kanatzidis, M. G. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803384 · Cited by 269
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Heo, J. H., & Im, S. H. (2016) · Advanced Materials · doi:10.1002/adma.201501629 · Cited by 266
Heo, J. H., You, M. S., Chang, M. H., Yin, W., Ahn, T. K., Lee, S.-J., Sung, S.-J., Kim, D. H., & Im, S. H. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.014 · Cited by 266
Layer-by-Layer Degradation of Methylammonium Lead Tri-iodide Perovskite Microplates
Fan, Z., Xiao, H., Wang, Y., Zhao, Z., Lin, Z., Cheng, H.-C., Lee, S.-J., Wang, G., Feng, Z., Goddard, W. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.005 · Cited by 271
Kumar, R., & Bag, M. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c05493 · Cited by 267
Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells
Saki, Z., Byranvand, M. M., Taghavinia, N., Kedia, M., & Saliba, M. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02018h · Cited by 263
Kim, J. H., Jo, Y., Kim, J. H., Jang, J. W., Kang, H. J., Lee, Y. H., Kim, D. S., Jun, Y., & Lee, J. S. (2015) · ACS Nano · doi:10.1021/acsnano.5b03859 · Cited by 266
Sputtered rear electrode with broadband transparency for perovskite solar cells
Werner, J., Dubuis, G., Walter, A., Löper, P., Moon, S.-J., Nicolay, S., Morales-Masis, M., De Wolf, S., Niesen, B., & Ballif, C. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.06.024 · Cited by 266
O’Regan, B. C., Barnes, P. R. F., Li, X., Law, C., Palomares, E., & Marin-Beloqui, J. M. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00761 · Cited by 264
Al Zoubi, W., Kamil, M. P., Fatimah, S., Nashrah, N., & Ko, Y. G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100663 · Cited by 265
A Photonic Crystal Laser from Solution Based Organo-Lead Iodide Perovskite Thin Films
Chen, S., Roh, K., Lee, J., Chong, W. K., Lu, Y., Mathews, N., Sum, T. C., & Nurmikko, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b08153 · Cited by 267
Afre, R. A., & Pugliese, D. (2024) · Micromachines · doi:10.3390/mi15020192 · Cited by 247
“Typically, the films are baked after spin coating to produce a well-crystallized per-ovskite layer, as baking results in strong adhesion and bonding between metal cations and halogen anions [143].”
BackgroundEffect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Zhao, X., Kim, H.-S., Seo, J.-Y., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15673 · Cited by 265
Heo, S., Seo, G., Lee, Y., Lee, D., Seol, M., Lee, J., Park, J.-B., Kim, K., Yun, D.-J., Kim, Y. S., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00303j · Cited by 263
Self-citationGrancini, G., Marras, S., Prato, M., Giannini, C., Quarti, C., De Angelis, F., De Bastiani, M., Eperon, G. E., Snaith, H. J., Manna, L., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501877h · Cited by 263
Chemical Pathways Connecting Lead(II) Iodide and Perovskite via Polymeric Plumbate(II) Fiber
Guo, Y., Shoyama, K., Sato, W., Matsuo, Y., Inoue, K., Harano, K., Liu, C., Tanaka, H., & Nakamura, E. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10599 · Cited by 264
Wu, C., Zou, Y., Wu, T., Ban, M., Pecunia, V., Han, Y., Liu, Q., Song, T., Duhm, S., & Sun, B. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700338 · Cited by 263
Najafi, L., Taheri, B., Martín-García, B., Bellani, S., Di Girolamo, D., Agresti, A., Oropesa-Nuñez, R., Pescetelli, S., Vesce, L., Calabrò, E., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05514 · Cited by 264
Gratia, P., Magomedov, A., Malinauskas, T., Daskeviciene, M., Abate, A., Ahmad, S., Grätzel, M., Getautis, V., & Nazeeruddin, M. K. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504666 · Cited by 264
Metadata
- Authors
- Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I.
- Affiliations
- Korea Research Institute of Chemical Technology (KR)
- Corresponding author
- Seok, Sang Il
- Venue
- Nature Materials
- Published
- 2014-07-06
- Volume
- 13
- Issue
- 9
- Pages
- 897-903
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2011472471
- Cited by
- 6,723
- References
- 25
- Citations by year
- 2026: 243 · 2025: 294 · 2024: 322 · 2023: 404 · 2022: 451 · 2021: 626 · 2020: 667 · 2019: 748 · 2018: 844 · 2017: 827 · 2016: 700 · 2015: 504 · 2014: 92
- FWCI
- 375.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- National Renewable Energy Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, solvent engineering, PTAA, hole transport materials, gamma-butyrolactone, dimethyl sulfoxide, mesoporous TiO2, planar heterojunction, power conversion efficiency, hysteresis, solution processing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.