Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 901–1,000 of 1,000
An, H., Smith, J. W., Ji, B., Cotty, S. R., Zhou, S., Yao, L., Kalutantirige, F. C., Chen, W., Ou, Z., Su, X., et al. (2022) · Science Advances · doi:10.1126/sciadv.abk1888 · Cited by 72
Multi‐Color 3D Printing via Single‐Vat Grayscale Digital Light Processing
Peng, X., Yue, L., Liang, S., Montgomery, S. M., Lu, C., Cheng, C., Beyah, R., Zhao, R. R., & Qi, H. J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202112329 · Cited by 70
4D printing: A detailed review of materials, techniques, and applications
Joharji, L., Mishra, R., Alam, F., Tytov, S., Al‐Modaf, F., & El‐Atab, N. (2022) · Microelectronic Engineering · doi:10.1016/j.mee.2022.111874 · Cited by 77
4D‐Printed Soft and Stretchable Self‐Folding Cuff Electrodes for Small‐Nerve Interfacing
Hiendlmeier, L., Zurita, F., Vogel, J., Duca, F. D., Boustani, G. A., Hu, P., Kopic, I., Nikić, M., Teshima, T., & Wolfrum, B. L. (2023) · Advanced Materials · doi:10.1002/adma.202210206 · Cited by 75
Towards high performance and durable soft tactile actuators
Tan, M., Wang, H., Gao, D., Huang, P.-W., & Lee, P. S. (2024) · Chemical Society Reviews · doi:10.1039/d3cs01017a · Cited by 73
Bioinspired and biohybrid soft robots: Principles and emerging technologies
Chen, Z., Chen, J., Jung, S., Kim, H., Preti, M. L., Laschi, C., Ren, Z., Sitti, M., Full, R. J., & Yang, G. (2025) · Matter · doi:10.1016/j.matt.2025.102045 · Cited by 84
Pixelated Polymers: Directed Self Assembly of Liquid Crystalline Polymer Networks
Kowalski, B. A., Guin, T. C., Auguste, A. D., Godman, N. P., & White, T. J. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00116 · Cited by 73
Ren, L., Li, B., Song, Z., Liu, Q., Ren, L., & Zhou, X. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.061 · Cited by 69
Kang, T., Chang, H., Choi, D., Kim, S., Moon, J., Lim, J. A., Lee, K., & Yi, H. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b00764 · Cited by 69
Responsive and Foldable Soft Materials
Liu, J., Gao, Y., Lee, Y.-J., & Yang, S. M. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.11.003 · Cited by 73
On 4D printing as a revolutionary fabrication technique for smart structures
Melly, S. K., Liu, L., Liu, Y., & Leng, J. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab9989 · Cited by 72
Elastic Fibers/Fabrics for Wearables and Bioelectronics
Zhang, Y., Zhou, J., Zhang, Y., Zhang, D., Yong, K. T., & Xiong, J. (2022) · Advanced Science · doi:10.1002/advs.202203808 · Cited by 71
Siripongpreda, T., Hoven, V. P., Narupai, B., & Rodthongkum, N. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111806 · Cited by 74
Pneumatic cells toward absolute Gaussian morphing
Gao, T., Bico, J., & Roman, B. (2023) · Science · doi:10.1126/science.adi2997 · Cited by 74
Dudek, K. K., Kadic, M., Coulais, C., & Bertoldi, K. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00828-9 · Cited by 119
Fabrication of Soft Robotics by Additive Manufacturing: From Materials to Applications
Bliah, O., Hegde, C., Tan, J. M. R., & Magdassi, S. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00749 · Cited by 78
3D printing of materials with spatially non-linearly varying properties
Ren, L., Song, Z., Liu, H., Han, Q., Zhao, C., Derby, B., Liu, Q., & Ren, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.012 · Cited by 67
Polymer 4D printing: Advanced shape‐change and beyond
Imrie, P., & Jin, J. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210718 · Cited by 75
Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A., & Therriault, D. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101596 · Cited by 68
3D bioprinting using a new photo-crosslinking method for muscle tissue restoration
Lee, J., Lee, H., Jin, E.-J., Ryu, D., & Kim, G. H. (2023) · npj Regenerative Medicine · doi:10.1038/s41536-023-00292-5 · Cited by 66
Stimuli-responsive materials for 4D Printing: Mechanical, Manufacturing, and Biomedical Applications
Kumar, P., Suryavanshi, P., Dwivedy, S. K., & Banerjee, S. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.125553 · Cited by 77
Dang, H. P., Shabab, T., Shafiee, A., Peiffer, Q. C., Fox, K. E., Tran, N. L., Dargaville, T. R., Hutmacher, D. W., & Tran, P. A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab14ff · Cited by 75
Buffering by buckling as a route for elastic deformation
Vella, D. (2019) · Nature Reviews Physics · doi:10.1038/s42254-019-0063-1 · Cited by 71
Geometry and Elasticity of a Knitted Fabric
Poincloux, S., Adda-Bedia, M., & Lechenault, F. (2018) · Physical Review X · doi:10.1103/physrevx.8.021075 · Cited by 123
Programming stiff inflatable shells from planar patterned fabrics
Siéfert, E., Reyssat, É., Bico, J., & Roman, B. (2020) · Soft Matter · doi:10.1039/d0sm01041c · Cited by 66
Morouço, P., Azimi, B., Milazzo, M., Mokhtari, F., Fernandes, C., Reis, D., & Danti, S. (2020) · Applied Sciences · doi:10.3390/app10249143 · Cited by 73
3D Patterning within Hydrogels for the Recreation of Functional Biological Environments
Primo, G. A., & Mata, Á. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009574 · Cited by 69
Flytrap Inspired pH‐Driven 3D Hydrogel Actuator by Femtosecond Laser Microfabrication
Wang, J., Jin, F., Dong, X., Liu, J., & Zheng, M. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200276 · Cited by 70
Zhao, H., Pan, S., Natalia, A., Wu, X., Ong, C. J., Teo, M. C. C., So, J. B. Y., & Shao, H. (2022) · Nature Biomedical Engineering · doi:10.1038/s41551-022-00954-7 · Cited by 72
Mahmoud, D. B. E. D., & Schulz‐Siegmund, M. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202202631 · Cited by 73
Ultrathin Shape Change Smart Materials
Xu, W., Kwok, K. S., & Gracias, D. H. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00468 · Cited by 70
Progress in the mechanical modulation of cell functions in tissue engineering
Dey, K., Roca, E., Ramorino, G., & Sartore, L. (2020) · Biomaterials Science · doi:10.1039/d0bm01255f · Cited by 68
Song, J., Min, S., Kim, S.-G., Cho, Y., & Ahn, S. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-021-00356-1 · Cited by 70
Dong, Y., Wang, L., Xia, N., Wang, Y., Wang, S., Yang, Z., Jin, D., Du, X., Yu, E., Pan, C., et al. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106254 · Cited by 65
4D Printing for Automotive Industry Applications
Raina, A., Haq, M. I. U., Javaid, M., Rab, S., & Haleem, A. (2021) · Journal of The Institution of Engineers (India) Series D · doi:10.1007/s40033-021-00284-z · Cited by 75
Digital light processing 3D printing of hydrogels: a minireview
Ding, H., Dong, M., Zheng, Q., & Wu, Z. L. (2022) · Molecular Systems Design & Engineering · doi:10.1039/d2me00066k · Cited by 78
3D Printed Silicones with Shape Memory
Wu, A. S., Small, W., Bryson, T. M., Cheng, E., Metz, T. R., Schulze, S. E., Duoss, E. B., & Wilson, T. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04663-z · Cited by 70
Teoh, J. E. M., Zhao, Y., An, J., Chua, C. K., & Liu, Y. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa908a · Cited by 67
Toward Growing Robots: A Historical Evolution from Cellular to Plant-Inspired Robotics
Dottore, E. D., Sadeghi, A., Mondini, A., Mattoli, V., & Mazzolai, B. (2018) · Frontiers in Robotics and AI · doi:10.3389/frobt.2018.00016 · Cited by 67
Kosik-Kozioł, A., Graham, E., Jaroszewicz, J., Chlanda, A., Kumar, P. T. S., Ivanovski, S., Święszkowski, W., & Vaquette, C. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01018 · Cited by 64
Viewpoint: Homeostasis as Inspiration—Toward Interactive Materials
Lerch, M. M., Grinthal, A., & Aizenberg, J. (2020) · Advanced Materials · doi:10.1002/adma.201905554 · Cited by 67
Le, X., Lü, W., He, J., Serpe, M. J., Zhang, J., & Chen, T. (2018) · Science China Materials · doi:10.1007/s40843-018-9372-2 · Cited by 64
4D Printing: The Shape-Morphing in Additive Manufacturing
Piedade, A. P. (2019) · Journal of Functional Biomaterials · doi:10.3390/jfb10010009 · Cited by 67
Additive Manufacturing of 3D Structures Composed of Wood Materials
Kam, D., Layani, M., BarkaiMinerbi, S., Orbaum, D., BenHarush, S. A., Shoseyov, O., & Magdassi, S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900158 · Cited by 71
3D Printing of Ordered Mesoporous Silica Complex Structures
Shukrun, E., Schilt, Y., Moshkovitz-Douvdevany, M. Y., Levi‐Kalisman, Y., Raviv, U., & Magdassi, S. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c02364 · Cited by 64
An ontology-based framework to formalize and represent 4D printing knowledge in design
Dimassi, S., Demoly, F., Cruz, C., Qi, H. J., Kim, K.-Y. J., André, J., & Gomes, S. (2021) · Computers in Industry · doi:10.1016/j.compind.2020.103374 · Cited by 73
3D Laser Nanoprinting of Functional Materials
Liu, S., Hou, Z., Lin, L., Li, Z., & Sun, H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211280 · Cited by 66
Twistable Origami and Kirigami: from Structure-Guided Smartness to Mechanical Energy Storage
Wang, L., Song, W., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17776 · Cited by 65
Improving salt tolerance and thermal stability of cellulose nanofibrils by grafting modification
Liu, X., Wen, Y., Qu, J., Geng, X., Chen, B., Wei, B., Wu, B., Yang, S., Zhang, H., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.009 · Cited by 64
Light-induced shape morphing of thin films
Kuenstler, A. S., & Hayward, R. C. (2019) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2019.01.009 · Cited by 64
Active Mixing of Disparate Inks for Multimaterial 3D Printing
Ortega, J. M., Golobic, M., Sain, J. D., Lenhardt, J. M., Wu, A. S., Fisher, S., Pérez, L. X. P., Jaycox, A. W., Smay, J. E., Duoss, E. B., et al. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800717 · Cited by 69
Ko, J., Kim, D.-J., Song, Y., Lee, S., Kwon, M., Han, S., Kang, D., Kim, Y., Huh, J., Koh, J., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c04899 · Cited by 63
Printing Multi‐Material Organic Haptic Actuators
Zhai, Y., Wang, Z., Kwon, K., Cai, S., Lipomi, D. J., & Ng, T. N. (2020) · Advanced Materials · doi:10.1002/adma.202002541 · Cited by 72
A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites
Monfared, V., Bakhsheshi‐Rad, H. R., Ramakrishna, S., Razzaghi, M., & Berto, F. (2021) · Micromachines · doi:10.3390/mi12060704 · Cited by 72
Hisano, K., Kimura, S., Ku, K., Shigeyama, T., Akamatsu, N., Shishido, A., & Tsutsumi, O. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104702 · Cited by 67
Wang, Q., Zhou, R., Sun, J., Liu, J., & Zhu, Q. (2022) · ACS Nano · doi:10.1021/acsnano.2c04883 · Cited by 64
Gradient matters via filament diameter-adjustable 3D printing
Qu, H., Gao, C., Liu, K., Fu, H., Liu, Z., Kouwer, P. H. J., Han, Z., & Ruan, C. (2024) · Nature Communications · doi:10.1038/s41467-024-47360-y · Cited by 67
Hierarchically Arranged Helical Fiber Actuators Derived from Commercial Cloth
Gong, J., Lin, H., Dunlop, J., & Yuan, J. (2017) · Advanced Materials · doi:10.1002/adma.201605103 · Cited by 63
An instant responsive polymer driven by anisotropy of crystal phases
Deng, H., Dong, Y., Zhang, C., Xie, Y., Zhang, C., & Lin, J. (2017) · Materials Horizons · doi:10.1039/c7mh00854f · Cited by 63
Xue, R., Liu, C., Zhang, W., Zhu, Y., Tang, S., Du, Z., & Guo, X. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.10.011 · Cited by 63
Amyloid-Based Injectable Hydrogel Derived from Hydrolyzed Hen Egg White Lysozyme
Yang, L., Li, H., Yao, L., Yang, Y., & Ma, G. (2019) · ACS Omega · doi:10.1021/acsomega.8b03492 · Cited by 66
Biasing Buckling Direction in Shape‐Programmable Hydrogel Sheets with Through‐Thickness Gradients
Zhou, Y., Duque, C. M., Santangelo, C. D., & Hayward, R. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905273 · Cited by 63
“Freezing”, morphing, and folding of stretchy tough hydrogels
Li, T., Wang, J., Zhang, L., Yang, J., Yang, M., Zhu, D., Zhou, X., Handschuh‐Wang, S., Liu, Y., & Zhou, X. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01265a · Cited by 64
A Wetting‐Enabled‐Transfer (WET) Strategy for Precise Surface Patterning of Organohydrogels
Wan, X., Xu, X.-T., Liu, X., Jia, L., He, X. D., & Wang, S. (2021) · Advanced Materials · doi:10.1002/adma.202008557 · Cited by 62
Inverse Design of Inflatable Soft Membranes Through Machine Learning
Forte, A. E., Hanakata, P. Z., Jin, L., Zari, E., Zareei, A., Fernandes, M. C., Sumner, L., Alvarez, J. T., & Bertoldi, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202111610 · Cited by 65
Liu, X., Li, B., Wang, W., Zhang, Y., Li, H., & Li, Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137718 · Cited by 63
Gogoi, D., Kumar, M., & Singh, J. (2024) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2024.100159 · Cited by 80
Nan, K., Luan, H., Yan, Z., Ning, X., Wang, Y., Wang, A., Wang, J., Han, M., Chang, M., Li, K., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604281 · Cited by 63
Catalytically Initiated Gel-in-Gel Printing of Composite Hydrogels
Basu, A., Saha, A., Goodman, C. J., Shafranek, R. T., & Nelson, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14177 · Cited by 71
3D Printed Photoresponsive Materials for Photonics
Nocentini, S., Martella, D., Parmeggiani, C., & Wiersma, D. S. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900156 · Cited by 63
Gu, J., Breen, D. E., Hu, J., Zhu, L., Tao, Y., Zande, T., Wang, G., Zhang, Y. J., & Yao, L. (2019) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/3290605.3300267 · Cited by 62
Grigsby, W. J., Scott, S. M., Plowman-Holmes, M. I., Middlewood, P. G., & Recabar, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.12.026 · Cited by 65
Non-equilibrium signal integration in hydrogels
Korevaar, P. A., Kaplan, C. N., Grinthal, A., Rust, R. M., & Aizenberg, J. (2020) · Nature Communications · doi:10.1038/s41467-019-14114-0 · Cited by 64
Sun, Y.-C., Wan, Y., Nam, R., Chu, M., & Naguib, H. E. (2019) · Scientific Reports · doi:10.1038/s41598-019-55298-1 · Cited by 68
Additive manufacturing of polymer-based structures by extrusion technologies
Maguire, A., Pottackal, N. T., Saadi, M. A. S. R., Rahman, M. M., & Ajayan, P. M. (2020) · Oxford Open Materials Science · doi:10.1093/oxfmat/itaa004 · Cited by 76
3D Printing of Electrically Responsive PVC Gel Actuators
Wang, Z., Wang, Y., Wang, Z., He, Q., Li, C., & Cai, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05082 · Cited by 65
Preparation of Smart Materials by Additive Manufacturing Technologies: A Review
Mondal, K., & Tripathy, P. K. (2021) · Materials · doi:10.3390/ma14216442 · Cited by 66
Bioinspired Structures for Soft Actuators
Wei, S., & Ghosh, T. K. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101521 · Cited by 61
Cellulose‐Based Soft Actuators
Chen, W., Sun, B., Biehl, P., & Zhang, K. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200072 · Cited by 65
Li, X., Zheng, F., Wang, X., Geng, X., Zhao, S., Liu, H., Dou, D., Leng, Y., Wang, L., & Yubo, F. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.649 · Cited by 84
Redefining polymer science via multi-stimulus responsiveness
Wang, S., & Urban, M. W. (2023) · Chem · doi:10.1016/j.chempr.2023.04.014 · Cited by 64
Material assembly from collective action of shape-changing polymers
Abdelrahman, M. K., Wagner, R. J., Kalairaj, M. S., Zadan, M., Kim, M. H., Jang, L. K., Wang, S., Javed, M., Dana, A., Singh, K. A., et al. (2024) · Nature Materials · doi:10.1038/s41563-023-01761-4 · Cited by 71
Direct ink writing of polymer‐based materials—A review
Li, C., Feng, C., Zhang, L., Zhang, L., & Wang, L. (2024) · Polymer Engineering and Science · doi:10.1002/pen.27038 · Cited by 65
Design and Applications of Extracellular Matrix Scaffolds in Tissue Engineering and Regeneration
Mangani, S., Vetoulas, M., Mineschou, K., Spanopoulos, K., Vivanco, M. D., Piperigkou, Z., & Karamanos, N. K. (2025) · Cells · doi:10.3390/cells14141076 · Cited by 77
Particle‐Free Emulsions for 3D Printing Elastomers
Rauzan, B. M., Nelson, A. Z., Lehman, S. E., Ewoldt, R. H., & Nuzzo, R. G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707032 · Cited by 61
Self-citationRolled‐up Nanotechnology: Materials Issue and Geometry Capability
Xu, C., Wu, X., Huang, G., & Mei, Y. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800486 · Cited by 64
Light-regulated growth from dynamic swollen substrates for making rough surfaces
Xue, L., Xiong, X., Krishnan, B. P., Puza, F., Wang, S., Zheng, Y., & Cui, J. (2020) · Nature Communications · doi:10.1038/s41467-020-14807-x · Cited by 64
Wood and the Activity of Dead Tissue
Eder, M., Schäffner, W., Burgert, I., & Fratzl, P. (2020) · Advanced Materials · doi:10.1002/adma.202001412 · Cited by 66
Biofabrication Strategies and Engineered In Vitro Systems for Vascular Mechanobiology
Pradhan, S., Banda, O. A., Farino, C. J., Sperduto, J. L., Keller, K. A., Taitano, R. A., & Slater, J. H. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901255 · Cited by 64
3D electron-beam writing at sub-15 nm resolution using spider silk as a resist
Qin, N., Qian, Z., Zhou, C., Xia, X., & Tao, T. H. (2021) · Nature Communications · doi:10.1038/s41467-021-25470-1 · Cited by 70
Field-assisted additive manufacturing of polymeric composites
Safaee, S., Schock, M., Joyee, E. B., Pan, Y., & Chen, R. K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102642 · Cited by 77
Colloidal Self‐Assembly: From Passive to Active Systems
Huang, Y., Wu, C., Chen, J., & Tang, J. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202313885 · Cited by 68
Zurlo, G., & Truskinovsky, L. (2017) · Physical Review Letters · doi:10.1103/physrevlett.119.048001 · Cited by 61
3D printed structures for modeling the Young’s modulus of bamboo parenchyma
Dixon, P., Muth, J. T., Xiao, X., Skylar‐Scott, M. A., Lewis, J. A., & Gibson, L. J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.036 · Cited by 60
Self-citationMechanochemical Regulated Origami with Tough Hydrogels by Ion Transfer Printing
Zhou, X., Li, T., Wang, J., Chen, F., Zhou, D., Liu, Q., Li, B., Cheng, J., Zhou, X., & Zheng, B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01610 · Cited by 62
Shape-Programmed Fabrication and Actuation of Magnetically Active Micropost Arrays
Jeon, J., Park, J. E., Park, S. J., Won, S., Zhao, H., Kim, S., Shim, B. S., Urbas, A. M., Hart, A. J., Ku, Z., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01511 · Cited by 60
An Anisotropic Hydrogel Actuator Enabling Earthworm‐Like Directed Peristaltic Crawling
Sun, Z., Yamauchi, Y., Araoka, F., Kim, Y. S., Bergueiro, J., Ishida, Y., Ebina, Y., Sasaki, T., Hikima, T., & Aida, T. (2018) · Angewandte Chemie · doi:10.1002/ange.201810052 · Cited by 60
Smart biomaterials: From 3D printing to 4D bioprinting
Amukarimi, S., Rezvani, Z., Eghtesadi, N., & Mozafari, M. (2022) · Methods · doi:10.1016/j.ymeth.2022.07.006 · Cited by 69
Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response
Javadzadeh, M., del Barrio, J., & Sánchez‐Somolinos, C. (2022) · Advanced Materials · doi:10.1002/adma.202209244 · Cited by 74
Hou, K., Li, Y., Liu, Y., Zhang, R., Hsiao, B. S., & Zhu, M. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.034 · Cited by 61
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.