Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 401–500 of 1,000
4D rods: 3D structures via programmable 1D composite rods
Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.004 · Cited by 156
Multimaterial 3D and 4D Bioprinting of Heterogenous Constructs for Tissue Engineering
Chen, A., Wang, W., Mao, Z., He, Y., Chen, S., Liu, G., Su, J. D., Feng, P., Shi, Y., Yan, C., et al. (2023) · Advanced Materials · doi:10.1002/adma.202307686 · Cited by 180
Wang, R., Cheng, C., Wang, H., & Wang, D. (2024) · ChemPhysMater · doi:10.1016/j.chphma.2024.07.006 · Cited by 195
Directed assembly of bio-inspired hierarchical materials with controlled nanofibrillar architectures
Tseng, P., Napier, B. S., Zhao, S., Mitropoulos, A. N., Applegate, M. B., Marelli, B., Kaplan, D. L., & Omenetto, F. G. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.4 · Cited by 156
Dual-Gel 4D Printing of Bioinspired Tubes
Liu, J., Erol, O., Pantula, A., Liu, W., Jiang, Z., Kobayashi, K., Chatterjee, D., Hibino, N., Romer, L. H., Kang, S. H., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17218 · Cited by 161
Longo, S. J., Cox, S. M., Azizi, E., Ilton, M., Olberding, J. P., Pierre, R. S., & Patek, S. N. (2019) · Journal of Experimental Biology · doi:10.1242/jeb.197889 · Cited by 169
Four-dimensional micro-building blocks
Huang, T., Huang, H., Jin, D., Chen, Q., Huang, J., Zhang, L., & Duan, H. (2020) · Science Advances · doi:10.1126/sciadv.aav8219 · Cited by 163
Hydrogels for bioinspired soft robots
Park, C. S., Kang, Y., Na, H., & Sun, J. (2024) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2024.101791 · Cited by 168
3D bioprinting: improving in vitro models of metastasis with heterogeneous tumor microenvironments
Albritton, J. L., & Miller, J. S. (2017) · Disease Models & Mechanisms · doi:10.1242/dmm.025049 · Cited by 154
“The ability to control in vitro tissue construct properties over time, termed ‘ 4D printing ’ , is outside the scope of this Review but the nascent field is growing rapidly (Sydney Gladman et al., 2016).”
Design for Additive Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9_11 · Cited by 154
4D printing of shape memory polyurethane via stereolithography
Zhao, T., Yu, R., Li, X., Cheng, B., Zhang, Y., Yang, X. M., Zhao, X., Zhao, Y., & Huang, W. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.021 · Cited by 161
Digital coding of mechanical stress in a dynamic covalent shape memory polymer network
Zhang, G., Peng, W., Wu, J., Zhao, Q., & Xie, T. (2018) · Nature Communications · doi:10.1038/s41467-018-06420-w · Cited by 154
Four-dimensional metal-organic frameworks
Evans, J. D., Bon, V., Senkovska, I., Lee, H., & Kaskel, S. (2020) · Nature Communications · doi:10.1038/s41467-020-16527-8 · Cited by 157
Zhu, Q. L., Dai, C. F., Wagner, D., Daab, M., Hong, W., Breu, J., Zheng, Q., & Wu, Z. L. (2020) · Advanced Materials · doi:10.1002/adma.202005567 · Cited by 154
Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600625 · Cited by 153
Janbaz, S., Hedayati, R., & ZADPOOR, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00195e · Cited by 167
Shape Changing Robots: Bioinspiration, Simulation, and Physical Realization
Shah, D., Yang, B., Kriegman, S., Levin, M. G., Bongard, J., & Kramer-Bottiglio, R. K. (2020) · Advanced Materials · doi:10.1002/adma.202002882 · Cited by 172
Laser-based additively manufactured polymers: a review on processes and mechanical models
Brighenti, R., Cosma, M. P., Marșavina, L., Spagnoli, A., & Terzano, M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05254-6 · Cited by 170
Chen, T., Bakhshi, H., Liu, L., Ji, J., & Agarwal, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800514 · Cited by 153
Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
Zhao, Z., Kuang, X., Yuan, C., Qi, H. J., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02444 · Cited by 152
Recent Progress on Cellulose‐Based Ionic Compounds for Biomaterials
Yang, Y., Lu, Y.-T., Zeng, K., Heinze, T., Groth, T., & Zhang, K. (2020) · Advances in Materials · doi:10.1002/adma.202000717 · Cited by 134
4D printing of reconfigurable metamaterials and devices
van Manen, T., Janbaz, S., Jansen, K. M. B., & Zadpoor, A. A. (2021) · Communications Materials · doi:10.1038/s43246-021-00165-8 · Cited by 151
Advances in 4D printing of liquid crystalline elastomers: materials, techniques, and applications
Guan, Z., Wang, L., & Bae, J. (2022) · Materials Horizons · doi:10.1039/d2mh00232a · Cited by 160
Pugliese, R., & Regondi, S. (2022) · Polymers · doi:10.3390/polym14142794 · Cited by 152
Yue, L., Montgomery, S. M., Sun, X., Yu, L., Song, Y., Nomura, T., Tanaka, M., & Qi, H. J. (2023) · Nature Communications · doi:10.1038/s41467-023-36909-y · Cited by 164
Bioinspired Additive Manufacturing of Hierarchical Materials: From Biostructures to Functions
Wei, J., Pan, F., Ping, H., Yang, K., Wang, Y., Wang, Q., & Fu, Z. (2023) · Research · doi:10.34133/research.0164 · Cited by 170
Design strategies and applications of biomaterials and devices for Hernia repair
Kalaba, S., Gerhard, E., Winder, J. S., Pauli, E. M., Haluck, R. S., & Yang, J. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.05.002 · Cited by 149
Peng, X., Liu, T., Zhang, Q., Shang, C., Bai, Q., & Wang, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701962 · Cited by 150
Exploiting Advanced Hydrogel Technologies to Address Key Challenges in Regenerative Medicine
Foyt, D. A., Norman, M. D. A., Yu, T. T. L., & Gentleman, E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700939 · Cited by 150
Biomaterials for Personalized Cell Therapy
Facklam, A. L., Volpatti, L. R., & Anderson, D. G. (2019) · Advanced Materials · doi:10.1002/adma.201902005 · Cited by 158
3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 154
4D Printing of Liquid Crystals: What's Right for Me?
del Pozo, M., Sol, J. A. H. P., Schenning, A. P. H. J., & Debije, M. G. (2021) · Advanced Materials · doi:10.1002/adma.202104390 · Cited by 156
Harnessing 4D Printing Bioscaffolds for Advanced Orthopedics
Chen, X., Han, S., Wu, W., Wu, Z., Yuan, Y., Wu, J., & Liu, C. (2022) · Small · doi:10.1002/smll.202106824 · Cited by 160
Computational design for 4D printing of topology optimized multi-material active composites
Athinarayanarao, D., Prod’hon, R., Chamoret, D., Qi, H. J., Bodaghi, M., André, J., & Demoly, F. (2023) · npj Computational Materials · doi:10.1038/s41524-022-00962-w · Cited by 158
Ganguly, S., & Margel, S. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101574 · Cited by 153
4D printing: Technological developments in robotics applications
Khalid, M. Y., Arif, Z. U., Ahmed, W., Umer, R., Zolfagharian, A., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113670 · Cited by 160
Programmable nanocomposites of cellulose nanocrystals and zwitterionic hydrogels for soft robotics
Nasseri, R., Bouzari, N., Huang, J., Golzar, H., Jankhani, S., Tang, X. S., Mekonnen, T. H., Aghakhani, A., & Shahsavan, H. (2023) · Nature Communications · doi:10.1038/s41467-023-41874-7 · Cited by 158
The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
Tamburrino, F., Graziosi, S., & Bordegoni, M. (2018) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4040131 · Cited by 160
Cui, H., Miao, S., Esworthy, T. J., Lee, S., Zhou, X., Hann, S.-Y., Webster, T. J., Harris, B. T., & Zhang, L. G. (2019) · Nano Research · doi:10.1007/s12274-019-2340-9 · Cited by 159
Perovskite nanowire–block copolymer composites with digitally programmable polarization anisotropy
Zhou, N., Bekenstein, Y., Eisler, C. N., Zhang, D., Schwartzberg, A. M., Yang, P., Alivisatos, A. P., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aav8141 · Cited by 146
Self-citationPrinting Flexible and Hybrid Electronics for Human Skin and Eye‐Interfaced Health Monitoring Systems
Kim, K., Kim, B., & Lee, C. H. (2020) · Advanced Materials · doi:10.1002/adma.201902051 · Cited by 147
Smart Hydrogels with Antibacterial Properties Built from All Natural Building Blocks
Li, M., Wang, H., Hu, J., Hu, J., Zhang, S., Yang, Z., Li, Y., & Cheng, Y. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02547 · Cited by 148
3D Printing of Polymer Hydrogels—From Basic Techniques to Programmable Actuation
Puza, F., & Lienkamp, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205345 · Cited by 152
Kong, Y. L., Gupta, M. K., Johnson, B. N., & McAlpine, M. C. (2016) · Nano Today · doi:10.1016/j.nantod.2016.04.007 · Cited by 147
Oliver, K., Seddon, A. M., & Trask, R. S. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0295-8 · Cited by 159
Nonuniform growth and surface friction determine bacterial biofilm morphology on soft substrates
Fei, C., Mao, S., Yan, J. Q., Alert, R., Stone, H. A., Bassler, B. L., Wingreen, N. S., & Košmrlj, A. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1919607117 · Cited by 155
Growth patterns for shape-shifting elastic bilayers
van Rees, W. M., Vouga, E., & Mahadevan, L. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1709025114 · Cited by 152
Self-citationColloidal nanoparticle inks for printing functional devices: emerging trends and future prospects
Zeng, M., & Zhang, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07552f · Cited by 153
Chen, D., Liu, Q., Han, Z., Zhang, J., Song, H., Wang, K., Song, Z., Wen, S., Zhou, Y., Yan, C., et al. (2020) · Advanced Science · doi:10.1002/advs.202000584 · Cited by 147
Elasticity and stability of shape-shifting structures
Holmes, D. P. (2019) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2019.02.008 · Cited by 162
Programmable Reversible Shape Transformation of Hydrogels Based on Transient Structural Anisotropy
Liu, K., Zhang, Y., Cao, H., Liu, H., Geng, Y., Yuan, W., Zhou, J., Wu, Z. L., Shan, G., Bao, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.202001693 · Cited by 159
Foundations for Soft, Smart Matter by Active Mechanical Metamaterials
Pishvar, M., & Harne, R. L. (2020) · Advanced Science · doi:10.1002/advs.202001384 · Cited by 157
3D printing of polymer composites to fabricate wearable sensors: A comprehensive review
Osman, A., & Lü, J. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100734 · Cited by 158
Ahrens, J. H., Uzel, S. G. M., Skylar‐Scott, M., Mata, M. M., Lu, A., Kroll, K. T., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202200217 · Cited by 143
Self-citationBiomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing
Markstedt, K., Escalante, A., Toriz, G., & Gatenholm, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13400 · Cited by 143
Bio-inspired sensing and actuating materials
Zhao, Q., Wang, Y., Cui, H., & Du, X. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01483g · Cited by 152
Ding, M., Jing, L., Yang, H., Machnicki, C. E., Fu, X., Li, K. N., Wong, I. Y., & Chen, P. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2020.100088 · Cited by 151
Yang, G. H., Kim, W., Kim, J., & Kim, G. (2021) · Theranostics · doi:10.7150/thno.50794 · Cited by 141
Machine Learning‐Evolutionary Algorithm Enabled Design for 4D‐Printed Active Composite Structures
Sun, X., Yue, L., Yu, L., Shao, H., Peng, X., Zhou, K., Demoly, F., Zhao, R. R., & Qi, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109805 · Cited by 150
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 148
Review of Polymeric Materials in 4D Printing Biomedical Applications
Shie, M., Shen, Y., Astuti, S. D., Lee, A. K.-X., Lin, S.-H., Dwijaksara, N. L. B., & Chen, Y. (2019) · Polymers · doi:10.3390/polym11111864 · Cited by 159
Fang, Z., Song, H., Zhang, Y., Jin, B., Wu, J., Zhao, Q., & Xie, T. (2020) · Matter · doi:10.1016/j.matt.2020.01.014 · Cited by 144
Controlled Arrangement of Nanocellulose in Polymeric Matrix: From Reinforcement to Functionality
Peng, N., Huang, D., Gong, C., Wang, Y., Zhou, J., & Chang, C. (2020) · ACS Nano · doi:10.1021/acsnano.0c08906 · Cited by 144
Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches
Cheng, X., & Zhang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901895 · Cited by 148
4D Printing of a Digital Shape Memory Polymer with Tunable High Performance
Zhang, Y., Huang, L., Song, H., Ni, C., Wu, J., Zhao, Q., & Xie, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11062 · Cited by 145
Lizundia, E., Costa, C. M., Alves, R., & Lanceros-Méndez, S. (2020) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2020.100001 · Cited by 175
Tannin-Based Hybrid Materials and Their Applications: A Review
Koopmann, A.-K., Schuster, C., Torres-Rodríguez, J., Kain, S., Pertl-Obermeyer, H., Petutschnigg, A., & Hüsing, N. (2020) · Molecules · doi:10.3390/molecules25214910 · Cited by 140
Jammed Micro‐Flake Hydrogel for Four‐Dimensional Living Cell Bioprinting
Ding, A., Jeon, O., Cleveland, D. S., Gasvoda, K. L., Wells, D., Lee, S. J., & Alsberg, E. (2022) · Advanced Materials · doi:10.1002/adma.202109394 · Cited by 161
Liu, J., Huang, Y., Liu, Y.-Z., Zhang, D.-C., Koynov, K., Butt, H.-J., & Wu, S. (2024) · Nature Chemistry · doi:10.1038/s41557-024-01476-2 · Cited by 129
Stanisz, M., Kłapiszewski, Ł., & Jesionowski, T. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125409 · Cited by 140
Ma, T., Lv, L., Ouyang, C., Hu, X., Liao, X., Song, Y., & Hu, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117217 · Cited by 151
The Design for Additive Manufacturing Worksheet
Booth, J., Alperovich, J., Chawla, P., Ma, J., Reid, T., & Karthik Ramani, A. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037251 · Cited by 140
Self‐Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting
Ambrosi, A., & Pumera, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700655 · Cited by 141
Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing
Lv, C., Sun, X., Xia, H., Yu, Y., Wang, G., Cao, X., Li, S., Wang, Y., Chen, Q., Yu, Y., et al. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.12.053 · Cited by 139
Zhou, Y. F., LaChance, A. M., Smith, A. T., Cheng, H., Liu, Q., & Sun, L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807611 · Cited by 153
4D Bioprinting: Technological Advances in Biofabrication
Yang, G. H., Yeo, M., Koo, Y. W., & Kim, G. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800441 · Cited by 147
Ceamanos, L., Kahveci, Z., López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13341 · Cited by 143
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
Mirzaali, M. J., Moosabeiki, V., Rajaai, S. M., Zhou, J., & ZADPOOR, A. A. (2022) · Materials · doi:10.3390/ma15155457 · Cited by 154
Jiang, B., Jiao, H., Guo, X., Chen, G., Guo, J., Wu, W., Jin, Y., Cao, G., & Liang, Z. (2023) · Advanced Science · doi:10.1002/advs.202206055 · Cited by 165
A general patterning approach by manipulating the evolution of two-dimensional liquid foams
Huang, Z., Su, M., Yang, Q., Li, Z., Chen, S., Li, Y., Zhou, X., Li, F., & Song, Y. (2017) · Nature Communications · doi:10.1038/ncomms14110 · Cited by 138
4D printing with robust thermoplastic polyurethane hydrogel-elastomer trilayers
Baker, A. B., Bates, S. R. G., Llewellyn-Jones, T. M., Valori, L. P. B., Dicker, M. P. M., & Trask, R. S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.107544 · Cited by 142
Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing
Lee, J. M., Ng, W. L., & Yeong, W. Y. (2019) · Applied Physics Reviews · doi:10.1063/1.5053909 · Cited by 160
Liquid Crystal Networks on Thermoplastics: Reprogrammable Photo‐Responsive Actuators
Verpaalen, R. C. P., da Cunha, M. P., Engels, T. A. P., Debije, M. G., & Schenning, A. P. H. J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915147 · Cited by 139
Kirigami‐Design‐Enabled Hydrogel Multimorphs with Application as a Multistate Switch
Hao, X. P., Xu, Z., Li, C., Hong, W., Zheng, Q., & Wu, Z. L. (2020) · Advanced Materials · doi:10.1002/adma.202000781 · Cited by 140
3D printing of continuous fiber-reinforced thermoset composites
He, X., Ding, Y., Lei, Z., Welch, S., Zhang, W., Dunn, M. L., & Yu, K. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101921 · Cited by 172
Zhang, X., Zhang, K., Zhang, L., Wang, W., Li, Y., & He, R. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110470 · Cited by 145
Chen, F., Zhou, D., Wang, J., Li, T., Zhou, X., Gan, T., Handschuh‐Wang, S., & Zhou, X. (2018) · Angewandte Chemie · doi:10.1002/ange.201803366 · Cited by 138
Al‐Ketan, O., Soliman, A., AlQubaisi, A. M., & Al‐Rub, R. K. A. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700549 · Cited by 136
A general strategy of 3D printing thermosets for diverse applications
Lei, D., Yang, Y., Liu, Z., Chen, S., Song, B., Shen, A., Yang, B., Li, S., Yuan, Z., Qi, Q., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00937f · Cited by 144
Chemistry from 3D printed objects
Hartings, M. R., & Ahmed, Z. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0097-z · Cited by 156
3D bioprinted cancer models: from basic biology to drug development
Neufeld, L., Yeini, E., Pozzi, S., & Satchi‐Fainaro, R. (2022) · Nature reviews. Cancer · doi:10.1038/s41568-022-00514-w · Cited by 155
Design of Fatigue‐Resistant Hydrogels
Han, Z., Lu, Y., & Qu, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202313498 · Cited by 160
Eelkema, R., & Pich, A. (2020) · Advanced Materials · doi:10.1002/adma.201906012 · Cited by 143
Bioinspired Soft Robots Based on the Moisture‐Responsive Graphene Oxide
Liu, Y., Chen, Z., Han, D., Mao, J., Ma, J., Zhang, Y., & Sun, H. (2021) · Advanced Science · doi:10.1002/advs.202002464 · Cited by 141
Mahmood, A., Akram, T., Shenggui, C., & Chen, H. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110952 · Cited by 143
Hydro-sensitive sandwich structures for self-tunable smart electromagnetic shielding
Wang, Y., Cheng, X., Song, W.-L., Ma, C., Bian, X., & Chen, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.097 · Cited by 133
Covalent-supramolecular hybrid polymers as muscle-inspired anisotropic actuators
Chin, S. M., Synatschke, C. V., Liu, S., Nap, R. J., Sather, N. A., Wang, Q., Álvarez, Z., Edelbrock, A. N., Fyrner, T., Palmer, L. C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04800-w · Cited by 134
Zhao, Z., Zhuo, S., Fang, R., Zhang, L., Zhou, X., Xu, Y., Zhang, J., Dong, Z., Jiang, L., & Liu, M. (2018) · Advanced Materials · doi:10.1002/adma.201804435 · Cited by 135
Cortés, A., Cosola, A., Sangermano, M., Campo, M., Prolongo, S. G., Pirri, C. F., Jiménez‐Suárez, A., & Chiappone, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106774 · Cited by 142
3D Printing of Ultratough Polyion Complex Hydrogels
Zhu, F., Cheng, L., Yin, J., Wu, Z. L., Qian, J., Fu, J., & Zheng, Q. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09881 · Cited by 131
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.