Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 201–300 of 1,000
Bioinspired dual-morphing stretchable origami
Kim, W., Byun, J., Kim, J.-K., Choi, W.-Y., Jakobsen, K., Jakobsen, J., Lee, D.-Y., & Cho, K.-J. (2019) · Science Robotics · doi:10.1126/scirobotics.aay3493 · Cited by 252
Wang, W., Yao, L., Cheng, C.-Y., Zhang, T., Atsumi, H., Wang, L., Wang, G., Anilionyte, O., Steiner, H., Ou, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601984 · Cited by 251
Programming the shape-shifting of flat soft matter
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.08.026 · Cited by 252
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Electrochemically reconfigurable architected materials
Xia, X., Afshar, A., Yang, H., Portela, C. M., Kochmann, D. M., Di Leo, C. V., & Greer, J. R. (2019) · Nature · doi:10.1038/s41586-019-1538-z · Cited by 249
4D Printing: A Review on Recent Progresses
Chu, H., Yang, W., Sun, L., Cai, S., Yang, R., Liang, W., Yu, H., & Liu, L. (2020) · Micromachines · doi:10.3390/mi11090796 · Cited by 247
Multi-responsive hydrogel structures from patterned droplet networks
Downs, F. G., Lunn, D. J., Booth, M. J., Sauer, J. B., Ramsay, W. J., Klemperer, R. G., Hawker, C. J., & Bayley, H. (2020) · Nature Chemistry · doi:10.1038/s41557-020-0444-1 · Cited by 245
Ajdary, R., Tardy, B. L., Mattos, B. D., Bai, L., & Rojas, O. J. (2021) · Advanced Materials · doi:10.1002/adma.202001085 · Cited by 245
Smart polymers and nanocomposites for 3D and 4D printing
Falahati, M., Ahmadvand, P., Safaee, S., Chang, Y.-C., Lyu, Z., Chen, R., Li, L., & Lin, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2020.06.001 · Cited by 245
Pardo, A., Gómez-Florit, M., Barbosa, S., Taboada, P., Domingues, R. M. A., & Gomes, M. E. (2021) · ACS Nano · doi:10.1021/acsnano.0c08253 · Cited by 243
Advancing Frontiers in Bone Bioprinting
Ashammakhi, N., Hasan, A., Kaarela, O., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 244
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Nadgorny, M., & Ameli, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01786 · Cited by 244
Field responsive mechanical metamaterials
Jackson, J. A., Messner, M. C., Dudukovic, N. A., Smith, W. L., Bekker, L., Moran, B., Golobic, A. M., Pascall, A. J., Duoss, E. B., Loh, K. J., et al. (2018) · Science Advances · doi:10.1126/sciadv.aau6419 · Cited by 244
Nanocellulose‐Based Functional Materials: From Chiral Photonics to Soft Actuator and Energy Storage
Lv, P., Lu, X., Wang, L., & Feng, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104991 · Cited by 242
Zheng, S. Y., Shen, Y., Zhu, F., Yin, J., Qian, J., Fu, J., Wu, Z. L., & Zheng, Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803366 · Cited by 242
CelloMOF: Nanocellulose Enabled 3D Printing of Metal–Organic Frameworks
Sultan, S., Abdelhamid, H. N., Zou, X., & Mathew, A. P. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805372 · Cited by 240
Data‐Driven Design for Metamaterials and Multiscale Systems: A Review
Lee, D., Chen, W. (., Wang, L., Chan, Y., & Chen, W. (2024) · Advanced Materials · doi:10.1002/adma.202305254 · Cited by 235
Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves
Zhang, H., Guo, X., Wu, J., Fang, D., & Zhang, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar8535 · Cited by 239
A tissue-engineered scale model of the heart ventricle
MacQueen, L. A., Sheehy, S. P., Chantre, C. O., Zimmerman, J. F., Pasqualini, F. S., Liu, X., Goss, J. A., Campbell, P. H., Gonzalez, G. M., Park, S.-J., et al. (2018) · Nature Biomedical Engineering · doi:10.1038/s41551-018-0271-5 · Cited by 227
Self-citation3D Bioprinting of Cell‐Laden Hydrogels for Improved Biological Functionality
Hull, S. M., Brunel, L. G., & Heilshorn, S. C. (2022) · Advanced Materials · doi:10.1002/adma.202103691 · Cited by 240
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
Centrifugal multimaterial 3D printing of multifunctional heterogeneous objects
Cheng, J., Wang, R., Sun, Z., Liu, Q., He, X., Li, H., Ye, H., Yang, X., Wei, X., Li, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-35622-6 · Cited by 236
Stimuli-Responsive Hydrogels: The Dynamic Smart Biomaterials of Tomorrow
Neumann, M., di Marco, G., Iudin, D., Viola, M., van Nostrum, C. F., van Ravensteijn, B. G. P., & Vermonden, T. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00967 · Cited by 229
Multimodal Soft Robotic Actuation and Locomotion
Yao, D. R., Kim, I., Yin, S., & Gao, W. (2024) · Advanced Materials · doi:10.1002/adma.202308829 · Cited by 226
Sustainable cellulose and its derivatives for promising biomedical applications
Cheng, W., Zhu, Y., Jiang, G., Cao, K., Zeng, S., Chen, W., Zhao, D., & Yu, H. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101152 · Cited by 232
Recent Advances in Stimuli‐Responsive Shape‐Morphing Hydrogels
Liu, X., Gao, M., Chen, J., Guo, S., Zhu, W., Bai, L., Zhai, W., Du, H., Wu, H., Yan, C., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203323 · Cited by 232
Origami and Kirigami Nanocomposites
Xu, L., Shyu, T. C., & Kotov, N. A. (2017) · ACS Nano · doi:10.1021/acsnano.7b03287 · Cited by 232
3D-printed programmable tensegrity for soft robotics
Lee, H., Jang, Y., Choe, J. K., Lee, S., Song, H., Lee, J. P., Lone, N., & Kim, J. (2020) · Science Robotics · doi:10.1126/scirobotics.aay9024 · Cited by 232
Arif, Z. U., Khalid, M. Y., Zolfagharian, A., & Bodaghi, M. (2022) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2022.105374 · Cited by 230
Skin-like hydrogel devices for wearable sensing, soft robotics and beyond
Ying, B., & Liu, X. (2021) · iScience · doi:10.1016/j.isci.2021.103174 · Cited by 230
A review of 3D printing processes and materials for soft robotics
Yap, Y. L., Sing, S. L., & Yeong, W. Y. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2019-0302 · Cited by 227
4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers
Invernizzi, M., Turri, S., Levi, M., & Suriano, R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.023 · Cited by 229
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Camposeo, A., Persano, L., Farsari, M., & Pisignano, D. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800419 · Cited by 227
Emerging flexible sensors based on nanomaterials: recent status and applications
Wen, N., Zhang, L., Jiang, D., Wu, Z., Li, B., Sun, C., & Guo, Z. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta09556g · Cited by 226
Self-expanding/shrinking structures by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/10/105034 · Cited by 225
Resilient living materials built by printing bacterial spores
González, L. M., Mukhitov, N., & Voigt, C. A. (2020) · Nature Chemical Biology · doi:10.1038/s41589-019-0412-5 · Cited by 224
Biopolymeric photonic structures: design, fabrication, and emerging applications
Xiong, R., Luan, J., Kang, S., Ye, C., Singamaneni, S., & Tsukruk, V. V. (2020) · Chemical Society Reviews · doi:10.1039/c8cs01007b · Cited by 226
Dynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223
Laser reprogramming magnetic anisotropy in soft composites for reconfigurable 3D shaping
Deng, H., Sattari, K., Xie, Y., Liao, P., Yan, Z., & Lin, J. (2020) · Nature Communications · doi:10.1038/s41467-020-20229-6 · Cited by 222
Chen, D., & Zheng, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26980-7 · Cited by 222
Recent advances on 3D printing graphene-based composites
Guo, H., Lv, R., & Bai, S. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.03.003 · Cited by 218
Light‐Mediated Manufacture and Manipulation of Actuators
Han, D., Zhang, Y., Ma, J., Liu, Y., Han, B., & Sun, H. (2016) · Advanced Materials · doi:10.1002/adma.201602211 · Cited by 222
Ferreira, F. V., Otoni, C. G., De France, K. J., Barud, H. S., Lona, L. M. F., Cranston, E. D., & Rojas, O. J. (2020) · Materials Today · doi:10.1016/j.mattod.2020.03.003 · Cited by 222
Botanical‐Inspired 4D Printing of Hydrogel at the Microscale
Hu, Y., Wang, Z., Jin, D., Zhang, C., Sun, R., Li, Z., Hu, K., Ni, J., Cai, Z., Pan, D., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907377 · Cited by 221
3D‐Printed Photoresponsive Liquid Crystal Elastomer Composites for Free‐Form Actuation
Wang, Y., Yin, R., Jin, L., Liu, M., Gao, Y., Raney, J., & Yang, S. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202210614 · Cited by 218
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels
Odent, J., Wallin, T. J., Pan, W., Kruemplestaedter, K., Shepherd, R. F., & Giannelis, E. P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701807 · Cited by 218
Cellulose‐Based Biomimetics and Their Applications
Almeida, A. P. C., Canejo, J. P., Fernandes, S. N., Echeverria, C., Almeida, P. L., & Godinho, M. H. (2018) · Advanced Materials · doi:10.1002/adma.201703655 · Cited by 219
Solution Mask Liquid Lithography (SMaLL) for One‐Step, Multimaterial 3D Printing
Dolinski, N. D., Page, Z. A., Callaway, E. B., Eisenreich, F., Garcia, R. V., Chavez, R., Bothman, D. P., Hecht, S., Zok, F. W., & Hawker, C. J. (2018) · Advanced Materials · doi:10.1002/adma.201800364 · Cited by 217
Rotational multimaterial printing of filaments with subvoxel control
Larson, N. M., Mueller, J., Chortos, A., Davidson, Z. S., Clarke, D. R., & Lewis, J. A. (2023) · Nature · doi:10.1038/s41586-022-05490-7 · Cited by 217
Self-citation4D printing: Recent advances and proposals in the food sector
Teng, X., Zhang, M., & Mujumdar, A. S. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.01.076 · Cited by 216
Leist, S. K., & Zhou, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1198630 · Cited by 216
Highly-stretchable 3D-architected Mechanical Metamaterials
Jiang, Y., & Wang, Q. (2016) · Scientific Reports · doi:10.1038/srep34147 · Cited by 216
Trends in 3D Printing Processes for Biomedical Field: Opportunities and Challenges
Ghilan, A., Chiriac, A. P., Nita, L. E., Rusu, A. G., Neamtu, I., & Chiriac, V. M. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01722-x · Cited by 210
4D printing applications in medical field: A brief review
Javaid, M., & Haleem, A. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2018.09.007 · Cited by 212
Magnetic Dynamic Polymers for Modular Assembling and Reconfigurable Morphing Architectures
Kuang, X., Wu, S., Ze, Q., Yue, L., Jin, Y., Montgomery, S. M., Yang, F., Qi, H. J., & Zhao, R. (2021) · Advanced Materials · doi:10.1002/adma.202102113 · Cited by 212
Nanoscale Ion Regulation in Wood‐Based Structures and Their Device Applications
Chen, C., & Hu, L. (2021) · Advanced Materials · doi:10.1002/adma.202002890 · Cited by 209
Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
Roach, D. J., Kuang, X., Yuan, C., Chen, K., & Qi, H. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae96f · Cited by 208
Li, S., Bai, H., Shepherd, R. F., & Zhao, H. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201813402 · Cited by 209
Stimuli-responsive materials in additive manufacturing
Shafranek, R. T., Millik, S. C., Smith, P. T., Lee, C.-U., Boydston, A. J., & Nelson, A. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.002 · Cited by 210
Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Prendergast, M. E., & Burdick, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201902516 · Cited by 209
Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
Chen, K., Kuang, X., Li, V., Kang, G., & Qi, H. J. (2018) · Soft Matter · doi:10.1039/c7sm02362f · Cited by 207
Stereolithographic 4D Bioprinting of Multiresponsive Architectures for Neural Engineering
Miao, S., Cui, H., Nowicki, M., Xia, L., Zhou, X., Lee, S., Zhu, W., Sarkar, K., Zhang, Z., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800101 · Cited by 209
Bioinspired 3D structures with programmable morphologies and motions
Nojoomi, A., Arslan, H., Lee, K., & Yum, K. (2018) · Nature Communications · doi:10.1038/s41467-018-05569-8 · Cited by 207
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Symmetry-Breaking Actuation Mechanism for Soft Robotics and Active Metamaterials
Wu, S., Ze, Q., Zhang, R., Hu, N., Cheng, Y., Yang, F., & Zhao, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13840 · Cited by 207
Mechanics Design in Cellulose‐Enabled High‐Performance Functional Materials
Ray, U., Zhu, S., Pang, Z., & Li, T. (2021) · Advanced Materials · doi:10.1002/adma.202002504 · Cited by 204
Kirigami‐Inspired Pressure Sensors for Wearable Dynamic Cardiovascular Monitoring
Meng, K., Xiao, X., Liu, Z., Shen, S., Tat, T., Wang, Z., Lu, C., Ding, W., He, X., Yang, J., et al. (2022) · Advanced Materials · doi:10.1002/adma.202202478 · Cited by 204
Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Scalet, G. (2020) · Actuators · doi:10.3390/act9010010 · Cited by 209
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundHierarchical self-assembly into chiral nanostructures
Sang, Y., & Liu, M. (2022) · Chemical Science · doi:10.1039/d1sc03561d · Cited by 202
4D printing of shape memory polymers
Subash, A., & Kandasubramanian, B. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109771 · Cited by 204
Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers
Zhang, W., Wang, H., Wang, H., Chan, J. Y. E., Liu, H., Zhang, B., Zhang, Y.-F., Agarwal, K., Yang, X., Ranganath, A. S., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20300-2 · Cited by 204
Sustainable Cellulose-Nanofiber-Based Hydrogels
Guan, Q.-F., Yang, H.-B., Han, Z.-M., Ling, Z.-C., Yin, C.-H., Yang, K.-P., Zhao, Y.-X., & Yu, S.-H. (2021) · ACS Nano · doi:10.1021/acsnano.1c01247 · Cited by 203
Solid Lubrication at High-Temperatures—A Review
Kumar, R., Hussainova, I., Rahmani, R., & Antonov, M. (2022) · Materials · doi:10.3390/ma15051695 · Cited by 203
Self-assembled liquid crystal architectures for soft matter photonics
Ma, L.-L., Li, C.-Y., Pan, J.-T., Ji, Y.-E., Jiang, C., Zheng, R., Wang, Z.-Y., Wang, Y., Li, B.-X., & Lu, Y.-Q. (2022) · Light: Science & Applications · doi:10.1038/s41377-022-00930-5 · Cited by 202
Zhang, Y., Zhu, Y., Zheng, S., Zhang, L., Shi, X., He, J., Chou, X., & Wu, Z.-S. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.08.011 · Cited by 199
4D‐Printing of Photoswitchable Actuators
Lu, X., Ambulo, C. P., Wang, S., Rivera‐Tarazona, L. K., Kim, H., Searles, K., & Ware, T. H. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202012618 · Cited by 201
The Critical Roles of Water in the Processing, Structure, and Properties of Nanocellulose
Jing, S., Wu, L., Siciliano, A. P., Chen, C., Li, T., & Hu, L. (2023) · ACS Nano · doi:10.1021/acsnano.3c06773 · Cited by 198
4D Printing of Shape‐Memory Hydrogels for Soft‐Robotic Functions
Shiblee, M. N. I., Ahmed, K., Kawakami, M., & Furukawa, H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900071 · Cited by 201
Four-dimensional direct laser writing of reconfigurable compound micromachines
Jin, D., Chen, Q., Huang, T.-Y., Huang, J., Zhang, L., & Duan, H. (2020) · Materials Today · doi:10.1016/j.mattod.2019.06.002 · Cited by 200
Femtosecond laser programmed artificial musculoskeletal systems
Ma, Z.-C., Zhang, Y.-L., Han, B., Hu, X.-Y., Li, C.-H., Chen, Q.-D., & Sun, H.-B. (2020) · Nature Communications · doi:10.1038/s41467-020-18117-0 · Cited by 201
Spatial Control of Functional Response in 4D-Printed Active Metallic Structures
Ma, J., Franco, B., Tapia, G., Karayagiz, K., Johnson, L., Liu, J., Arroyave, R., Karaman, I., & Elwany, A. (2017) · Scientific Reports · doi:10.1038/srep46707 · Cited by 200
Silk‐Based Bioinks for 3D Bioprinting
Chawla, S., Midha, S., Sharma, A., & Ghosh, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701204 · Cited by 200
Bifurcation-based embodied logic and autonomous actuation
Jiang, Y., Korpas, L. M., & Raney, J. R. (2019) · Nature Communications · doi:10.1038/s41467-018-08055-3 · Cited by 200
A variable-stiffness tendril-like soft robot based on reversible osmotic actuation
Must, I., Sinibaldi, E., & Mazzolai, B. (2019) · Nature Communications · doi:10.1038/s41467-018-08173-y · Cited by 200
A Tissue Adhesion‐Controllable and Biocompatible Small‐Scale Hydrogel Adhesive Robot
Lee, Y., Chun, S., Son, D., Hu, X., Schneider, M., & Sitti, M. (2022) · Advanced Materials · doi:10.1002/adma.202109325 · Cited by 196
Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds
Deo, K. A., Singh, K. A., Peak, C. W., Alge, D. L., & Gaharwar, A. K. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0298 · Cited by 199
A Stimuli‐Responsive Nanocomposite for 3D Anisotropic Cell‐Guidance and Magnetic Soft Robotics
Tognato, R., Armiento, A. R., Bonfrate, V., Levato, R., Malda, J., Alini, M., Eglin, D., Giancane, G., & Serra, T. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201804647 · Cited by 198
Liu, J., Li, W., Guo, Y., Zhang, H., & Zhang, Z. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.02.026 · Cited by 196
Reconfigurable shape-morphing dielectric elastomers using spatially varying electric fields
Hajiesmaili, E., & Clarke, D. R. (2019) · Nature Communications · doi:10.1038/s41467-018-08094-w · Cited by 197
Nguyen, N. A., Barnes, S. H., Bowland, C. C., Meek, K. M., Littrell, K. C., Keum, J. K., & Naskar, A. K. (2018) · Science Advances · doi:10.1126/sciadv.aat4967 · Cited by 196
3D printing of multi-scalable structures via high penetration near-infrared photopolymerization
Zhu, J., Zhang, Q., Yang, T., Liu, Y., & Liu, R. (2020) · Nature Communications · doi:10.1038/s41467-020-17251-z · Cited by 195
4D printing of polymers: Techniques, materials, and prospects
Fu, P., Li, H., Gong, J., Fan, Z., Smith, A. T., Shen, K., Khalfalla, T. O., Huang, H., Qian, X., McCutcheon, J. R., et al. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101506 · Cited by 197
Shape morphing mechanical metamaterials through reversible plasticity
Hwang, D., Barron, E. J., Haque, A. B. M. T., & Bartlett, M. D. (2022) · Science Robotics · doi:10.1126/scirobotics.abg2171 · Cited by 196
Liu, B., Li, H., Meng, F., Xu, Z., Hao, L., Yao, Y., Zhu, H., Wang, C., Wu, J., Bian, S., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45938-0 · Cited by 195
Materials and technical innovations in 3D printing in biomedical applications
Tetsuka, H., & Shin, S. R. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00034e · Cited by 196
4D Printing of Magnetoactive Soft Materials for On-Demand Magnetic Actuation Transformation
Zhang, Y., Wang, Q., Yi, S., Lin, Z., Wang, C., Chen, Z., & Jiang, L. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19280 · Cited by 194
3D Printing of Organs-On-Chips
Yi, H.-G., Lee, H., & Cho, D.-W. (2017) · Bioengineering · doi:10.3390/bioengineering4010010 · Cited by 193
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.