Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 501–600 of 1,000
4D Printing: Future Insight in Additive Manufacturing
Zafar, M. Q., & Zhao, H. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00441-w · Cited by 146
Recent progress in the design and fabrication of multifunctional structures based on metamaterials
Yuan, X., Chen, M., Yao, Y., Guo, X., Huang, Y., Peng, Z., Xu, B., Lv, B., Tao, R., Duan, S., et al. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100883 · Cited by 141
Multifunctional Injectable Hydrogel for In Vivo Diagnostic and Therapeutic Applications
Cha, G. D., Lee, W. H., Sunwoo, S., Kang, D., Kang, T., Cho, K. W., Kim, M.-J., Park, O. K., Jung, D., Lee, J., et al. (2022) · ACS Nano · doi:10.1021/acsnano.1c07649 · Cited by 139
3D-printed liquid metal polymer composites as NIR-responsive 4D printing soft robot
Zhang, L., Huang, X., Cole, T., Lu, H., Hang, J., Li, W., Tang, S., Boyer, C. A., Davis, T. P., & Qiao, R. (2023) · Nature Communications · doi:10.1038/s41467-023-43667-4 · Cited by 152
Zhang, Q., Wommer, J., O’Rourke, C., Teitelman, J., Tang, Y., Robison, J., Lin, G., & Yin, J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.08.004 · Cited by 139
Luo, Y., Lin, X., Chen, B., & Wei, X. (2019) · Biofabrication · doi:10.1088/1758-5090/ab39c5 · Cited by 130
Printing Reconfigurable Bundles of Dielectric Elastomer Fibers
Chortos, A., Mao, J., Mueller, J., Hajiesmaili, E., Lewis, J. A., & Clarke, D. R. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010643 · Cited by 136
Self-citationThe status, barriers, challenges, and future in design for 4D printing
Demoly, F., Dunn, M. L., Wood, K. L., Qi, H. J., & André, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110193 · Cited by 141
Hydration-induced reversible deformation of biological materials
Quan, H., Kisailus, D., & Meyers, M. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00251-2 · Cited by 131
4D printing in biomedical applications: emerging trends and technologies
Agarwal, T., Hann, S.-Y., Chiesa, I., Cui, H., Celikkin, N., Micalizzi, S., Barbetta, A., Costantini, M., Esworthy, T. J., Zhang, L. G., et al. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01335a · Cited by 136
Low Melting Point Alloys Enabled Stiffness Tunable Advanced Materials
Hao, Y., Gao, J., Lv, Y., & Liu, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201942 · Cited by 140
Cui, C., An, L., Zhang, Z., Ji, M., Chen, K., Yang, Y., Su, Q., Wang, F., Cheng, Y., & Zhang, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203720 · Cited by 133
Qamar, I. P. S., Groh, R., Holman, D. M., & Roudaut, A. (2018) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/3173574.3173948 · Cited by 149
Malekmohammadi, S., Aminabad, N. S., Sabzi, A., Zarebkohan, A., Razavi, M., Vosough, M., Bodaghi, M., & Maleki, H. H. (2021) · Biomedicines · doi:10.3390/biomedicines9111537 · Cited by 139
Wood-inspired metamaterial catalyst for robust and high-throughput water purification
Zhang, L., Liu, H., Song, B., Gu, J., Li, L., Shi, W., Li, G., Zhong, S., Liu, H., Wang, X., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-46337-1 · Cited by 149
High‐Power Actuation from Molecular Photoswitches in Enantiomerically Paired Soft Springs
Aßhoff, S. J., Lancia, F., Iamsaard, S., Matt, B., Kudernác, T., Fletcher, S. P., & Katsonis, N. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201611325 · Cited by 127
Stimuli-Responsive Soft Untethered Grippers for Drug Delivery and Robotic Surgery
Ghosh, A., Yoon, C., Ongaro, F., Scheggi, S., Selaru, F. M., Misra, S., & Gracias, D. H. (2017) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2017.00007 · Cited by 132
Cooperative deformations of periodically patterned hydrogels
Wang, Z. J., Zhu, C. N., Hong, W., Wu, Z. L., & Zheng, Q. (2017) · Science Advances · doi:10.1126/sciadv.1700348 · Cited by 125
Site‐Specific Pre‐Swelling‐Directed Morphing Structures of Patterned Hydrogels
Wang, Z. J., Hong, W., Wu, Z. L., & Zheng, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708926 · Cited by 127
3D Printing of Anisotropic Hydrogels with Bioinspired Motion
Arslan, H., Nojoomi, A., Jeon, J., & Yum, K. (2018) · Advanced Science · doi:10.1002/advs.201800703 · Cited by 135
Recent Advances on Underwater Soft Robots
Qu, J., Xu, Y., Li, Z., Yu, Z., Mao, B., Wang, Y., Wang, Z., Fan, Q., Qian, X., Zhang, M., et al. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300299 · Cited by 148
Snap-Buckling Motivated Controllable Jumping of Thermo-Responsive Hydrogel Bilayers
Gao, G., Wang, Z., Xu, D., Wang, L., Xu, T., Zhang, H., Chen, J., & Fu, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16402 · Cited by 129
3D and 4D printing hydroxyapatite-based scaffolds for bone tissue engineering and regeneration
Soleymani, S., & Naghib, S. M. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e19363 · Cited by 139
Designing and transforming yield-stress fluids
Nelson, A. Z., Schweizer, K. S., Rauzan, B. M., Nuzzo, R. G., Vermant, J., & Ewoldt, R. H. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.06.002 · Cited by 147
Self-citationAll‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Wang, J., Chiappone, A., Roppolo, I., Shao, F., Fantino, E., Lorusso, M., Rentsch, D., Dietliker, K., Pirri, C. F., & Grützmacher, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201710951 · Cited by 131
Nanoparticle–Polymer Synergies in Nanocomposite Hydrogels: From Design to Application
Chen, T., Hou, K., Ren, Q., Chen, G., Wei, P., & Zhu, M. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800337 · Cited by 132
Dual-3D Femtosecond Laser Nanofabrication Enables Dynamic Actuation
Zhang, Y., Tian, Y., Wang, H., Ma, Z., Han, D., Niu, L., Chen, Q., & Sun, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b08200 · Cited by 124
Jiang, P., Yan, C., Guo, Y., Zhang, X., Cai, M., Jia, X., Wang, X., & Zhou, F. (2019) · Biomaterials Science · doi:10.1039/c9bm00081j · Cited by 131
Weaving liquid crystal elastomer fiber actuators for multifunctional soft robotics
Yang, H., Yin, X., Zhang, C., Chen, B., Sun, P., & Xu, Y. H. (2025) · Science Advances · doi:10.1126/sciadv.ads3058 · Cited by 128
The use of cellulose in bio-derived formulations for 3D/4D printing: A review
Gauss, C., Pickering, K. L., & Muthe, L. P. (2021) · Composites Part C Open Access · doi:10.1016/j.jcomc.2021.100113 · Cited by 149
Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing
Jiang, Y., Islam, M. N., He, R. Y., Huang, X., Cao, P., Advíncula, R. C., Dahotre, N. B., Dong, P., Wu, H. F., & Choi, W. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200492 · Cited by 135
Mahmood, A., Akram, T., Chen, H., & Chen, S. (2022) · Polymers · doi:10.3390/polym14214698 · Cited by 143
Bio-inspired anisotropic hydrogels and their applications in soft actuators and robots
Chen, Z., Wang, H., Cao, Y., Chen, Y., Akkuş, O., Liu, H., & Cao, C. C. (2023) · Matter · doi:10.1016/j.matt.2023.08.011 · Cited by 130
Differential growth and shape formation in plant organs
Huang, C., Wang, Z., Quinn, D., Suresh, S., & Hsia, K. J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1811296115 · Cited by 142
Correa, D., Poppinga, S., Mylo, M. D., Westermeier, A. S., Bruchmann, B., Menges, A., & Speck, T. (2020) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2019.0445 · Cited by 122
Additive manufacturing of smart polymeric composites: Literature review and future perspectives
Ikram, H., Rashid, A. A., & Koç, M. (2022) · Polymer Composites · doi:10.1002/pc.26948 · Cited by 128
Todd, E. A., Mirsky, N. A., Silva, B. L. G., Shinde, A. R., Arakelians, A. R. L., Nayak, V. V., Marcantonio, R. A. C., Gupta, N., Witek, L., & Coelho, P. G. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15100280 · Cited by 146
4D printing: The spotlight for 3D printed smart materials
Chen, J., Virrueta, C., Zhang, S., Mao, C., & Wang, J. (2024) · Materials Today · doi:10.1016/j.mattod.2024.06.004 · Cited by 131
Programmable Deployment of Tensegrity Structures by Stimulus-Responsive Polymers
Liu, K., Wu, J., Paulino, G. H., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-03412-6 · Cited by 119
Shape-morphing architected sheets with non-periodic cut patterns
Celli, P., McMahan, C., Ramirez, B., Bauhofer, A. A., Naify, C. J., Hofmann, D. C., Audoly, B., & Daraio, C. (2018) · Soft Matter · doi:10.1039/c8sm02082e · Cited by 135
3D-Printed Multi-Stimuli-Responsive Mobile Micromachines
Lee, Y., Ceylan, H., Yasa, I. C., Kılıç, U., & Sitti, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18221 · Cited by 120
3D printing in biomedical engineering: Processes, materials, and applications
Lai, J., Wang, C., & Wang, M. (2021) · Applied Physics Reviews · doi:10.1063/5.0024177 · Cited by 135
4D polycarbonates via stereolithography as scaffolds for soft tissue repair
Weems, A. C., Arno, M. C., Wei, Y., Huckstepp, R. T. R., & Dove, A. P. (2021) · Nature Communications · doi:10.1038/s41467-021-23956-6 · Cited by 126
Hu, G. F., Damanpack, A. R., Bodaghi, M., & Liao, W. H. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa95ec · Cited by 119
Design for Additive Manufacturing
Gibson, I., Rosen, D. W., Stucker, B. E., & Khorasani, M. (2020) · Springer eBooks · doi:10.1007/978-3-030-56127-7_19 · Cited by 139
Blooming Knit Flowers: Loop‐Linked Soft Morphing Structures for Soft Robotics
Han, M., & Ahn, S. (2017) · Advanced Materials · doi:10.1002/adma.201606580 · Cited by 126
3D-Printed Self-Folding Electronics
Sundaram, S., Kim, D. S., Baldo, M. A., Hayward, R. C., & Matusik, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10443 · Cited by 123
Recent advances in additive manufacturing of active mechanical metamaterials
Montgomery, S. M., Kuang, X., Armstrong, C. D., & Qi, H. J. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100869 · Cited by 131
Clasky, A. J., Watchorn, J., Chen, P., & Gu, F. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.030 · Cited by 122
Wan, X., He, Y., Liu, Y., & Leng, J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102689 · Cited by 150
On‐Demand Programming of Liquid Metal‐Composite Microstructures through Direct Ink Write 3D Printing
Haake, A., Tutika, R., Schloer, G. M., Bartlett, M. D., & Markvicka, E. J. (2022) · Advanced Materials · doi:10.1002/adma.202200182 · Cited by 123
Abdulsalam, L., Abubakar, S., Permatasari, I., Lawal, A. A., Uddin, S., Ullah, S., & Ahmad, I. (2025) · Polymers · doi:10.3390/polym17212901 · Cited by 155
Digital light processing 3D printing with thiol–acrylate vitrimers
Rossegger, E., Höller, R. J., Reisinger, D., Strasser, J., Fleisch, M., Grießer, T., & Schlögl, S. (2020) · Polymer Chemistry · doi:10.1039/d0py01520b · Cited by 121
Actuating and memorizing bilayer hydrogels for a self-deformed shape memory function
Wang, L., Jian, Y., Le, X., Lu, W., Ma, C., Zhang, J., Huang, Y., Huang, C.-F., & Chen, T. (2018) · Chemical Communications · doi:10.1039/c7cc09456f · Cited by 116
Tensile properties of multi-material interfaces in 3D printed parts
Lumpe, T. S., Mueller, J., & Shea, K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.024 · Cited by 118
4D printing using anisotropic thermal deformation of 3D-printed thermoplastic parts
Goo, B., Hong, C.-H., & Park, K. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108485 · Cited by 126
Duigou, A. L., Chabaud, G., Matsuzaki, R., & Castro, M. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108474 · Cited by 116
Peng, B., Yang, Y., Ju, T., & Cavicchi, K. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18618 · Cited by 120
Actuation of Three‐Dimensional‐Printed Nanocolloidal Hydrogel with Structural Anisotropy
Gevorkian, A., Morozova, S. M., Kheiri, S., Khuu, N., Chen, H., Young, E. W. K., Yan, N., & Kumacheva, E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010743 · Cited by 122
Reprogrammable soft actuation and shape-shifting via tensile jamming
Yang, B., Baines, R. L., Shah, D., Patiballa, S. K., Thomas, E., Madhusudhan Venkadesan, A., & Kramer-Bottiglio, R. K. (2021) · Science Advances · doi:10.1126/sciadv.abh2073 · Cited by 126
Intelligent Vascularized 3D/4D/5D/6D-Printed Tissue Scaffolds
Han, X., Saiding, Q., Cai, X., Xiao, Y., Wang, P., Cai, Z., Gong, X., Gong, W., Zhang, X., & Cui, W. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01187-2 · Cited by 154
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
Reversible shape change structures by grayscale pattern 4D printing
Wu, J., Zhao, Z., Kuang, X., Hamel, C. M., Fang, D., & Qi, H. J. (2018) · Multifunctional Materials · doi:10.1088/2399-7532/aac322 · Cited by 125
Engineering the vasculature for islet transplantation
Bowers, D. T., Song, W., Wang, L.-H., & Ma, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.051 · Cited by 115
Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing
Odent, J., Vanderstappen, S., Toncheva, A., Pichon, E., Wallin, T. J., Wang, K., Shepherd, R. F., Dubois, P., & Raquez, J.-M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03547h · Cited by 115
Cui, C., Kim, D.-O., Pack, M. Y., Han, B., Han, L., Sun, Y., & Han, L. (2020) · Biofabrication · doi:10.1088/1758-5090/aba502 · Cited by 118
Sajjad, R., Chauhdary, S. T., Anwar, M. T., Zahid, A., Khosa, A. A., Imran, M., & Sajjad, M. H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.08.002 · Cited by 169
4D sequential actuation: combining ionoprinting and redox chemistry in hydrogels
Baker, A. B., Wass, D. F., & Trask, R. S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/10/10lt02 · Cited by 114
Mechanical control of growth: ideas, facts and challenges
Irvine, K. D., & Shraiman, B. I. (2017) · Development · doi:10.1242/dev.151902 · Cited by 123
Bioinspired Electro‐Thermo‐Hygro Reversible Shape‐Changing Materials by 4D Printing
Duigou, A. L., Chabaud, G., Scarpa, F. L., & Castro, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903280 · Cited by 119
Programming temporal morphing of self-actuated shells
Guseinov, R., McMahan, C., Pérez, J., Daraio, C., & Bickel, B. (2020) · Nature Communications · doi:10.1038/s41467-019-14015-2 · Cited by 129
Asymmetric bilayer CNTs-elastomer/hydrogel composite as soft actuators with sensing performance
Li, H., Liang, Y., Gao, G., Wei, S., Jian, Y., Le, X., Lü, W., Liu, Q., Zhang, J., & Chen, T. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128988 · Cited by 114
Liquid Crystal Materials for Biomedical Applications
Zhang, Z., Yang, X., Zhao, Y., Ye, F., & Shang, L. (2023) · Advanced Materials · doi:10.1002/adma.202300220 · Cited by 150
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
García‐Tuñón, E., Feilden, E., Zheng, H. Y., D’Elia, E., Leong, A., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07717 · Cited by 114
Super tough magnetic hydrogels for remotely triggered shape morphing
Tang, J., Tong, Z., Xia, Y., Liu, M., Lv, Z., Gao, Y., Lu, T., Xie, S., Pei, Y., Fang, D., et al. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00568k · Cited by 114
Additive manufacturing with stimuli-responsive materials
Boydston, A. J., Cao, B., Nelson, A., Ono, R. J., Saha, A., Schwartz, J. J., & Thrasher, C. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07716a · Cited by 127
Jeong, H. Y., Woo, B. H., Kim, N., & Jun, Y. C. (2020) · Scientific Reports · doi:10.1038/s41598-020-63020-9 · Cited by 118
4D Printing: Materials, Technologies, and Future Applications in the Biomedical Field
Bajpai, A., Baigent, A., Raghav, S., Brádaigh, C. M. Ó., Koutsos, V., & Radacsi, N. (2020) · Sustainability · doi:10.3390/su122410628 · Cited by 126
Photo Processing for Biomedical Hydrogels Design and Functionality: A Review
Yao, H., Wang, J., & Mi, S. (2017) · Polymers · doi:10.3390/polym10010011 · Cited by 123
4D Biofabrication: Materials, Methods, and Applications
Ionov, L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800412 · Cited by 113
Voxelated Molecular Patterning in Three-Dimensional Freeforms
Tabrizi, M., Ware, T. H., & Shankar, M. R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04480 · Cited by 117
Reconfigurable soft body trajectories using unidirectionally stretchable composite laminae
Kim, S. Y., Baines, R. L., Booth, J., Vasios, N., Bertoldi, K., & Kramer-Bottiglio, R. K. (2019) · Nature Communications · doi:10.1038/s41467-019-11294-7 · Cited by 126
Bioprintable tough hydrogels for tissue engineering applications
Dorishetty, P., Dutta, N. K., & Choudhury, N. R. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102163 · Cited by 117
Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing
Hmeidat, N. S., Pack, R. C., Talley, S. J., Moore, R. B., & Compton, B. G. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101385 · Cited by 112
3D printing hydrogels for actuators: A review
Zhang, A., Wang, F., Lian, C., Wei, X., Xue, M., Yang, F. L., & Jiang, S. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2021.03.073 · Cited by 113
Self-Powered Sensors: Applications, Challenges, and Solutions
Javaid, S., Fahim, H., Zeadally, S., & He, B. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3241947 · Cited by 126
Morphing matter: from mechanical principles to robotic applications
Yang, X., Zhou, Y., Zhao, H., Huang, W., Wang, Y., Hsia, K. J., & Liu, M. (2023) · Soft Science · doi:10.20517/ss.2023.42 · Cited by 127
Narupai, B., & Nelson, A. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00200 · Cited by 121
Additive Manufacturing of Catalytically Active Living Materials
Saha, A., Johnston, T. G., Shafranek, R. T., Goodman, C. J., Zalatan, J. G., Storti, D., Ganter, M. A., & Nelson, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02719 · Cited by 116
Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites
Croom, B. P., Abbott, A. C., Kemp, J. W., Rueschhoff, L. M., Smieska, L., Woll, A. R., Stoupin, S., & Koerner, H. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101701 · Cited by 111
Recent progress on hydrogel actuators
Cheng, F., Chen, H., & Li, H.-D. (2021) · Journal of Materials Chemistry B · doi:10.1039/d0tb02524k · Cited by 116
Li, C., Xue, Y., Han, M., Palmer, L. C., Rogers, J. A., Huang, Y. Y., & Stupp, S. I. (2021) · Matter · doi:10.1016/j.matt.2021.01.016 · Cited by 111
Zhang, J., Yin, Z., Ren, L., Liu, Q., Ren, L., Yang, X., & Zhou, X. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101568 · Cited by 123
Roadmap on soft robotics: multifunctionality, adaptability and growth without borders
Mazzolai, B., Mondini, A., Dottore, E. D., Margheri, L., Carpi, F., Suzumori, K., Cianchetti, M., Speck, T., Smoukov, S. K., Burgert, I., et al. (2022) · Multifunctional Materials · doi:10.1088/2399-7532/ac4c95 · Cited by 132
Flégeau, K., Pace, R., Gautier, H., Réthoré, G., Guicheux, J., Visage, C. L., & Weiss, P. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.07.012 · Cited by 121
Biodegradable Thermomagnetically Responsive Soft Untethered Grippers
Kobayashi, K., Yoon, C., Oh, S. H., Pagaduan, J. V., & Gracias, D. H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15646 · Cited by 110
Modular fabrication of intelligent material-tissue interfaces for bioinspired and biomimetic devices
Clegg, J. R., Wagner, A. M., Shin, S. R., Hassan, S., Khademhosseini, A., & Peppas, N. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100589 · Cited by 116
Song, K. W., & Paulos, E. (2021) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/3411764.3445529 · Cited by 131
Soft shape-programmable surfaces by fast electromagnetic actuation of liquid metal networks
Ni, X., Luan, H., Kim, J.-T., Rogge, S. I., Bai, Y., Kwak, J. W., Liu, S., Yang, D. S., Li, S., Li, S., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31092-y · Cited by 110
Emerging 3D bioprinting applications in plastic surgery
Pu, Y., Ju, Y., Hu, Y., Xie, X., Fang, B., & Lei, L. (2023) · Biomaterials Research · doi:10.1186/s40824-022-00338-7 · Cited by 120
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.