Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 801–900 of 1,000
Repeatedly Recyclable 3D Printing Catalyst‐Free Dynamic Thermosetting Photopolymers
Cui, J., Liu, F., Lu, Z., Feng, S., Chen, L., Sun, Y., Cui, J. T., & Zhang, B. (2023) · Advanced Materials · doi:10.1002/adma.202211417 · Cited by 86
New Trends in 4D Printing: A Critical Review
Vatanparast, S., Boschetto, A., Bottini, L., & Gaudenzi, P. (2023) · Applied Sciences · doi:10.3390/app13137744 · Cited by 89
Metallic gels for conductive 3D and 4D printing
Xing, R., Yang, J., Zhang, D., Gong, W., Neumann, T. V., Wang, M., Huang, R., Kong, J., Qi, W. D., & Dickey, M. D. (2023) · Matter · doi:10.1016/j.matt.2023.06.015 · Cited by 80
Jambhulkar, S., Ravichandran, D., Zhu, Y., Thippanna, V., Ramanathan, A., Patil, D., Fonseca, N., Thummalapalli, S. V., Sundaravadivelan, B., Sun, A., et al. (2023) · Small · doi:10.1002/smll.202306394 · Cited by 82
Calcium Orthophosphate (CaPO4)-Based Bioceramics: Preparation, Properties, and Applications
Dorozhkin, S. V. (2022) · Coatings · doi:10.3390/coatings12101380 · Cited by 93
Advances and Challenges of Hydrogel Materials for Robotic and Sensing Applications
Ouyang, Y., Huang, G., Cui, J., Zhu, H. Y., Yan, G., & Mei, Y. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c01960 · Cited by 85
Development and analysis of a 3D printed hydrogel soft actuator
Zolfagharian, A., Kouzani, A. Z., Khoo, S., Nasri‐Nasrabadi, B., & Kaynak, A. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.08.038 · Cited by 79
Surface tension-assisted additive manufacturing
Ragelle, H., Tibbitt, M. W., Wu, S.-Y., Castillo, M. A., Cheng, G. Z., Gangadharan, S. P., Anderson, D. G., Cima, M. J., & Langer, R. (2018) · Nature Communications · doi:10.1038/s41467-018-03391-w · Cited by 80
Nature-inspired smart solar concentrators by 4D printing
Momeni, F., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.01.062 · Cited by 79
Zhang, Y., Li, Y., Hu, Y., Zhu, X., Huang, Y., Zhang, Z., Rao, S., Hu, Z., Qiu, W., Wang, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201803072 · Cited by 79
Lou, Z., Wang, L., Jiang, K., & Shen, G. (2019) · Nano Today · doi:10.1016/j.nantod.2019.03.002 · Cited by 79
Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties
Jiang, Z., Erol, O., Chatterjee, D., Xu, W., Hibino, N., Romer, L. H., Kang, S. H., & Gracias, D. H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07279 · Cited by 83
3D Interfacing between Soft Electronic Tools and Complex Biological Tissues
Li, H., Liu, H., Sun, M., Huang, Y., & Xu, L. (2020) · Advanced Materials · doi:10.1002/adma.202004425 · Cited by 82
Podstawczyk, D., Nizioł, M., Szymczyk‐Ziółkowska, P., & Fiedot‐Toboła, M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009664 · Cited by 79
Rheological properties of cellulose nanofiber hydrogel for high-fidelity 3D printing
Shin, S., & Hyun, J. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117976 · Cited by 84
Unconstrained 3D Shape Programming with Light‐Induced Stress Gradient
Liu, C., Tan, Y., He, C., Ji, S., & Xu, H. (2021) · Advanced Materials · doi:10.1002/adma.202105194 · Cited by 79
Soft grasping mechanisms composed of shape memory polymer based self-bending units
Wang, W., Yu, C. Y., Serrano, P. A. A., & Ahn, S. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.10.081 · Cited by 80
Poro-elasto-capillary wicking of cellulose sponges
Ha, J., Kim, J., Jung, Y., Yun, G., Kim, D., & Kim, H. (2018) · Science Advances · doi:10.1126/sciadv.aao7051 · Cited by 90
Digital Light Processing 3D Printing of Triple Shape Memory Polymer for Sequential Shape Shifting
Peng, B., Yang, Y., Gu, K., Amis, E. J., & Cavicchi, K. A. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00262 · Cited by 84
Rapid Volatilization Induced Mechanically Robust Shape-Morphing Structures toward 4D Printing
Zhang, Q., Kuang, X., Weng, S., Zhao, Z., Chen, H., Fang, D., & Qi, H. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02038 · Cited by 84
Aksoy, B., & Shea, H. R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001597 · Cited by 82
Wang, Y., & Li, X. (2020) · Mechanics of Materials · doi:10.1016/j.mechmat.2020.103628 · Cited by 78
Furcated droplet motility on crystalline surfaces
Tang, X. G., Li, W., & Wang, L. (2021) · Nature Nanotechnology · doi:10.1038/s41565-021-00945-w · Cited by 77
Fabrication and Functionality Integration Technologies for Small‐Scale Soft Robots
Zhang, S., Ke, X., Jiang, Q., Chai, Z., Wu, Z., & Ding, H. (2022) · Advanced Materials · doi:10.1002/adma.202200671 · Cited by 87
Additive manufacturing for biomedical bone implants: Shaping the future of bones
Razzaq, M. H., Zaheer, M. U., Asghar, H., Aktas, O. C., Aycan, M. F., & Mishra, Y. K. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.100931 · Cited by 87
Bio-Mimic Motion of 3D-Printed Gel Structures Dispersed with Magnetic Particles
Shinoda, H., Azukizawa, S., Maeda, K., & Tsumori, F. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0361909jes · Cited by 78
Light‐Driven Shape Morphing, Assembly, and Motion of Nanocomposite Gel Surfers
Kim, H., Kang, J., Zhou, Y., Kuenstler, A. S., Kim, Y., Chen, C., Emrick, T. S., & Hayward, R. C. (2019) · Advanced Materials · doi:10.1002/adma.201900932 · Cited by 76
Design and applications of light responsive liquid crystal polymer thin films
Mehta, K., Peeketi, A. R., Liu, L., Broer, D. J., Onck, P. R., & Annabattula, R. K. (2020) · Applied Physics Reviews · doi:10.1063/5.0014619 · Cited by 81
Direct printing of functional 3D objects using polymerization-induced phase separation
Deore, B., Sampson, K. L., Lacelle, T., Kredentser, N., Lefebvre, J., Young, L. S., Hyland, J., Amaya, R. E., Tanha, J., Malenfant, P. R. L., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20256-3 · Cited by 84
Zhu, Q. L., Dai, C. F., Wagner, D., Khoruzhenko, O., Hong, W., Breu, J., Zheng, Q., & Wu, Z. L. (2021) · Advanced Science · doi:10.1002/advs.202102353 · Cited by 76
4D printing: a cutting-edge platform for biomedical applications
Naniz, M. A., Askari, M., Zolfagharian, A., Naniz, M. A., & Bodaghi, M. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac8e42 · Cited by 86
A perspective on 3D bioprinting in tissue regeneration
Ahadian, S., & Khademhosseini, A. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0020-3 · Cited by 76
3D Printing/Bioprinting Based Tailoring of in Vitro Tissue Models: Recent Advances and Challenges
Mehrotra, S., Moses, J. C., Bandyopadhyay, A., & Mandal, B. B. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00073 · Cited by 104
Advanced 4D-bioprinting technologies for brain tissue modeling and study
Esworthy, T. J., Miao, S., Lee, S., Zhou, X., Cui, H., Zuo, Y. Y., & Zhang, L. G. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1631899 · Cited by 80
3D Jet Writing: Functional Microtissues Based on Tessellated Scaffold Architectures
Jordahl, J. H., Solorio, L., Sun, H., Ramcharan, S., Teeple, C. B., Haley, H. R., Lee, K. J., Eyster, T. W., Luker, G. D., Krebsbach, P. H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707196 · Cited by 77
A taxonomy of shape-changing behavior for 4D printed parts using shape-memory polymers
Nam, S., & Pei, E. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00079-5 · Cited by 87
Smart Polymers for Microscale Machines
Tan, L., Davis, A. C., & Cappelleri, D. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007125 · Cited by 77
Chen, L., Zhang, Y., Ye, H., Duan, G., Duan, H., Ge, Q., & Wang, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02656 · Cited by 80
Shaping soft materials via digital light processing-based 3D printing: A review
Ge, Q., Jian, B., & Li, H. (2022) · Forces in Mechanics · doi:10.1016/j.finmec.2022.100074 · Cited by 85
Recent advances in bioprinting using silk protein-based bioinks
Chakraborty, J., Mu, X., Pramanick, A., Kaplan, D. L., & Ghosh, S. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121672 · Cited by 78
Textile production by additive manufacturing and textile waste recycling: a review
Fan, W., Wang, Y., Liu, R., Zou, J., Yu, X., Liu, Y., Zhi, C., & Meng, J. (2024) · Environmental Chemistry Letters · doi:10.1007/s10311-024-01726-2 · Cited by 82
Modular assembly of soft deployable structures and robots
Wang, W., Kim, N.-G., Rodrigue, H., & Ahn, S. (2017) · Materials Horizons · doi:10.1039/c6mh00550k · Cited by 75
3D printing of shape memory hydrogels with tunable mechanical properties
Shiblee, M. N. I., Ahmed, K., Khosla, A., Kawakami, M., & Furukawa, H. (2018) · Soft Matter · doi:10.1039/c8sm01156g · Cited by 81
Origami/Kirigami‐Guided Morphing of Composite Sheets
Cui, J., Poblete, F. R., & Zhu, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802768 · Cited by 81
Tissue-specific engineering: 3D bioprinting in regenerative medicine
Wang, Z., Kapadia, W., Li, C., Lin, F., Pereira, R. F., Granja, P. L., Sarmento, B., & Cui, W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.11.044 · Cited by 73
Rossegger, E., Höller, R. J., Reisinger, D., Fleisch, M., Strasser, J., Wieser, V., Grießer, T., & Schlögl, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.123631 · Cited by 79
Cheng, T. J., Thielen, M., Poppinga, S., Tahouni, Y., Wood, D. M., Steinberg, T., Menges, A., & Speck, T. (2021) · Advanced Science · doi:10.1002/advs.202100411 · Cited by 74
Additive Manufacturing of Shape Memory Polymer Composites for Futuristic Technology
Patadiya, J., Gawande, A., Joshi, G. N., & Kandasubramanian, B. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03083 · Cited by 74
Xing, H., He, X., Wang, Y., Zhang, X., Li, L., Wang, Y., Cheng, Z., Wu, H., Ge, Q., & Li, X. (2023) · Materials Today · doi:10.1016/j.mattod.2023.07.020 · Cited by 76
Programming liquid crystal elastomers for multistep ambidirectional deformability
Yao, Y., Wilborn, A. M., Lemaire, B., Trigka, F., Stricker, F., Weible, A. H., Li, S., Bennett, R. K. A., Cheung, T. C., Grinthal, A., et al. (2024) · Science · doi:10.1126/science.adq6434 · Cited by 77
Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing
Serex, L., Bertsch, A., & Renaud, P. (2018) · Micromachines · doi:10.3390/mi9020086 · Cited by 80
Bioinspired Multi‐Activities 4D Printing Objects: A New Approach Toward Complex Tissue Engineering
Devillard, C. D., Mandon, C. A., Lambert, S. A., Blum, L. J., & Marquette, C. A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800098 · Cited by 78
Bioinspired Actuators Based on Stimuli‐Responsive Polymers
Cui, H., Zhao, Q., Wang, Y., & Du, X. (2019) · Chemistry - An Asian Journal · doi:10.1002/asia.201900292 · Cited by 76
Chen, T., & Shea, K. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0118 · Cited by 90
Review—Recent Progresses in 4D Printing of Gel Materials
Ahmed, K., Shiblee, M. N. I., Khosla, A., Nagahara, L. A., Thundat, T. G., & Furukawa, H. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6e60 · Cited by 76
Zhou, L., Ye, J.-H., Fu, J., Gao, Q., & He, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22433 · Cited by 74
Beaumont, M., Winklehner, S., Veigel, S., Mundigler, N., Gindl‐Altmutter, W., Potthast, A., & Rosenau, T. (2020) · Green Chemistry · doi:10.1039/d0gc02116d · Cited by 76
Recent progress in the shape deformation of polymeric hydrogels from memory to actuation
Wu, B., Lu, H., Le, X., Lü, W., Zhang, J., Théato, P., & Chen, T. (2021) · Chemical Science · doi:10.1039/d0sc07106d · Cited by 72
Microalgal nanocellulose – opportunities for a circular bioeconomy
Ross, I. L., Shah, S., Hankamer, B. D., & Amiralian, N. (2021) · Trends in Plant Science · doi:10.1016/j.tplants.2021.05.004 · Cited by 81
Overflow Control for Sustainable Development by Superwetting Surface with Biomimetic Structure
Zhou, S., Jiang, L., & Dong, Z. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00976 · Cited by 73
Untethered unidirectionally crawling gels driven by asymmetry in contact forces
Pantula, A., Datta, B., Shi, Y., Wang, M., Liu, J., Deng, S., Cowan, N. J., Nguyen, T. D., & Gracias, D. H. (2022) · Science Robotics · doi:10.1126/scirobotics.add2903 · Cited by 80
Polymer Composites in 3D/4D Printing: Materials, Advances, and Prospects
Mahmood, A., Perveen, F., Chen, S., Akram, T., & Irfan, A. (2024) · Molecules · doi:10.3390/molecules29020319 · Cited by 94
Wu, J., Yun, Z., Song, W., Yu, T., Xue, W., Liu, Q., & Sun, X. (2024) · Theranostics · doi:10.7150/thno.89493 · Cited by 82
Yousefi, M. A., Rahmatabadi, D., Ahmadi, M., Bayati, A., Baniassadi, M., Laachachi, A., Silberschmidt, V. V., George, D., & Baghani, M. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115555 · Cited by 86
Microactuation and sensing using reversible deformations of laser-written polymeric structures
Rekštytė, S., Paipulas, D., Malinauskas, M., & Mizeikis, V. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa5d4d · Cited by 78
Biomimicry, Biofabrication, and Biohybrid Systems: The Emergence and Evolution of Biological Design
Raman, R., & Bashir, R. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700496 · Cited by 81
Development of Bioimplants with 2D, 3D, and 4D Additive Manufacturing Materials
Liu, G., He, Y., Liu, P., Chen, Z., Chen, X., Wan, L., Li, Y., & Lü, J. (2020) · Engineering · doi:10.1016/j.eng.2020.04.015 · Cited by 78
Multimaterial direct 4D printing of high stiffness structures with large bending curvature
Yuan, C., Wang, F., & Ge, Q. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101122 · Cited by 74
Advances in 4D printing: from stimulation to simulation
Pingale, P., Dawre, S., Dhapte-Pawar, V. S., Dhas, N. L., & Rajput, A. (2022) · Drug Delivery and Translational Research · doi:10.1007/s13346-022-01200-y · Cited by 81
Li, S., Yang, H., Zhu, N., Chen, G., Miao, Y., Zheng, J., Cong, Y., Chen, Y., Gao, J., Jian, X., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202211189 · Cited by 72
Synergistic Thermoresponsive Optical Properties of a Composite Self-Healing Hydrogel
Owusu‐Nkwantabisah, S., Gillmor, J. R., Switalski, S. C., Mis, M. R., Bennett, G., Moody, R. E., Antalek, B. J., Gutierrez, R., & Slater, G. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00355 · Cited by 72
Polyelectrolyte Soft Actuators: 3D Printed Chitosan and Cast Gelatin
Zolfagharian, A., Kaynak, A., Khoo, S., & Kouzani, A. Z. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0054 · Cited by 72
Weather-Manipulated Smart Broadband Electromagnetic Metamaterials
Zhang, K., Cheng, X., Zhang, Y., Chen, M., Chen, H., Yang, Y., Song, W., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15643 · Cited by 72
4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid
Uchida, T., & Onoe, H. (2019) · Micromachines · doi:10.3390/mi10070433 · Cited by 73
Stimuli induced cellulose nanomaterials alignment and its emerging applications: A review
Zhu, Q., Yao, Q., Sun, J., Chen, H., Xu, W., Liu, J., & Wang, Q. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115609 · Cited by 73
A Review on 4D Printing Material Composites and Their Applications
Rayate, A., & Jain, P. K. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.06.424 · Cited by 83
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab85a4 · Cited by 77
3D printed colloidal biomaterials based on photo-reactive gelatin nanoparticles
Diba, M., Koons, G. L., Bedell, M. L., & Mikos, A. G. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.120871 · Cited by 83
Huang, S., Huang, Y., & Li, Q. (2021) · Small Structures · doi:10.1002/sstr.202100038 · Cited by 74
Islam, M., Lantada, A. D., Mager, D., & Korvink, J. G. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101834 · Cited by 75
Design of topological elastic waveguides
Miniaci, M., & Pal, R. K. (2021) · Journal of Applied Physics · doi:10.1063/5.0057288 · Cited by 78
Advances in 4D‐printed physiological monitoring sensors
Mahmud, M. A. P., Tat, T., Xiao, X., Adhikary, P., & Chen, J. (2021) · Exploration · doi:10.1002/exp.20210033 · Cited by 76
Vat Photopolymerization Additive Manufacturing of Tough, Fully Recyclable Thermosets
Kuenstler, A. S., Hernandez, J. J., Trujillo‐Lemon, M., Osterbaan, A. J., & Bowman, C. N. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c22081 · Cited by 77
Ullah, M., Wahab, A., Khan, S. U., Naeem, M., Rehman, K. U., Ali, H. H. M., Ullah, A., Khan, A., Khan, N. R., Rizg, W. Y., et al. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112240 · Cited by 79
Biomimetic Structural Hydrogels Reinforced by Gradient Twisted Plywood Architectures
Tang, Y.-L., Wu, B., Li, J., Lu, C., Wu, J., & Xiong, R. (2024) · Advanced Materials · doi:10.1002/adma.202411372 · Cited by 82
Smart scaffolds in tissue regeneration
Ahadian, S., & Khademhosseini, A. (2018) · Regenerative Biomaterials · doi:10.1093/rb/rby007 · Cited by 74
Xiong, H., Chen, H., Zhao, L., Huang, Y., Zhou, K., & Zhang, D. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.02.045 · Cited by 73
Xiong, H., Zhao, L., Chen, H., Wang, X., Zhou, K., & Zhang, D. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.151824 · Cited by 70
Carbon nanotubes promote cell migration in hydrogels
Ravanbakhsh, H., Bao, G., & Mongeau, L. (2020) · Scientific Reports · doi:10.1038/s41598-020-59463-9 · Cited by 76
A review on spacers and membranes: Conventional or hybrid additive manufacturing?
Koo, J. W., Ho, J. S., An, J., Zhang, Y., Chua, C. K., & Chong, T. H. (2020) · Water Research · doi:10.1016/j.watres.2020.116497 · Cited by 81
Bioink Formulations for Bone Tissue Regeneration
Li, N., Guo, R., & Zhang, Z. J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.630488 · Cited by 67
Pneumatically Controlled Reconfigurable Bistable Bionic Flower for Robotic Gripper
Zhang, Z., Ni, X., Gao, W., Shen, H., Sun, M., Guo, G., Wu, H., & Jiang, S. (2021) · Soft Robotics · doi:10.1089/soro.2020.0200 · Cited by 70
Light‐Driven Actuation in Synthetic Polymers: A Review from Fundamental Concepts to Applications
Bhatti, M. R. A., Kernin, A., Tausif, M., Zhang, H., Papageorgiou, D. G., Bilotti, E., Peijs, T., & Bastiaansen, C. W. M. (2022) · Advanced Optical Materials · doi:10.1002/adom.202102186 · Cited by 76
Zhou, Q., Su, X., Wu, J., Zhang, X., Su, R., Ma, L., Sun, Q., & He, R. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01164 · Cited by 74
3D printed electronics with nanomaterials
Słoma, M. (2023) · Nanoscale · doi:10.1039/d2nr06771d · Cited by 76
Nakajima, S., Kawano, R., & Onoe, H. (2017) · Soft Matter · doi:10.1039/c7sm00279c · Cited by 70
Matrix-Assisted Three-Dimensional Printing of Cellulose Nanofibers for Paper Microfluidics
Shin, S., & Hyun, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07609 · Cited by 74
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Liu, J., Guo, Y., Weng, C., Zhang, H., & Zhang, Z. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105684 · Cited by 72
Shape‐Memory Balloon Structures by Pneumatic Multi‐material 4D Printing
Zhang, Q., Kuang, X., Weng, S., Yue, L., Roach, D. J., Fang, D., & Qi, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010872 · Cited by 78
Natural Origin Biomaterials for 4D Bioprinting Tissue‐Like Constructs
Costa, P. D. C., Costa, D. C. S., Correia, T. R., Gaspar, V. M., & Mano, J. F. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100168 · Cited by 68
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.