Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 101–200 of 1,000
Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0011-3 · Cited by 393
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
3D Printing of Living Responsive Materials and Devices
Liu, X., Yuk, H., Lin, S., Parada, G. A., Tang, T., Tham, E., de la Fuente‐Nunez, C., Lu, T. K., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704821 · Cited by 393
Polymer Networks: From Plastics and Gels to Porous Frameworks
Gu, Y., Zhao, J., & Johnson, J. A. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902900 · Cited by 388
Developments in 4D-printing: a review on current smart materials, technologies, and applications
Zhang, Z., Demir, K. G., & Gu, G. X. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1591541 · Cited by 392
Interplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T.-D., Alvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 387
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
Electrospinning: An enabling nanotechnology platform for drug delivery and regenerative medicine
Chen, S., Li, R., Li, X., & Xie, J. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.05.001 · Cited by 383
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Zhang, J., & Xiao, P. (2018) · Polymer Chemistry · doi:10.1039/c8py00157j · Cited by 381
Deep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design
Zheng, X., Zhang, X., Chen, T., & Watanabe, I. (2023) · Advanced Materials · doi:10.1002/adma.202302530 · Cited by 372
Design and applications of man-made biomimetic fibrillar hydrogels
Prince, E., & Kumacheva, E. (2019) · Nature Reviews Materials · doi:10.1038/s41578-018-0077-9 · Cited by 379
Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials
Zeng, H., Wasylczyk, P., Wiersma, D. S., & Priimagi, A. (2018) · Advanced Materials · doi:10.1002/adma.201703554 · Cited by 380
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Multi-stimuli-responsive programmable biomimetic actuator
Dong, Y., Wang, J., Guo, X., Yang, S., Ozen, M. O., Chen, P., Liu, X., Du, W., Xiao, F., Demirci, U., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12044-5 · Cited by 370
Bio-inspired pneumatic shape-morphing elastomers
Siéfert, E., Reyssat, E., Bico, J., & Roman, B. (2019) · Nature Materials · doi:10.1038/s41563-018-0219-x · Cited by 366
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 368
Xue, P., Bisoyi, H. K., Chen, Y., Zeng, H., Yang, J., Yang, X., Lv, P., Zhang, X., Priimagi, A., Wang, L., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202014533 · Cited by 363
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
Materials for Smart Soft Actuator Systems
Apsite, I., Salehi, S., & Ionov, L. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00453 · Cited by 357
Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel
Han, D., Farino, C., Yang, C., Scott, T., Browe, D., Choi, W., Freeman, J. W., & Lee, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04250 · Cited by 361
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Dong, Y., Wang, L., Xia, N., Yang, Z., Zhang, C., Pan, C., Jin, D., Zhang, J., Majidi, C., & Zhang, L. (2022) · Science Advances · doi:10.1126/sciadv.abn8932 · Cited by 348
4D printing: Fundamentals, materials, applications and challenges
Ahmed, A., Arya, S., Gupta, V., Furukawa, H., & Khosla, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123926 · Cited by 350
3D printing technologies: techniques, materials, and post-processing
Karakurt, I., & Lin, L. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.04.001 · Cited by 346
Ceramic Robocasting: Recent Achievements, Potential, and Future Developments
Peng, E., Zhang, D., & Ding, J. (2018) · Advanced Materials · doi:10.1002/adma.201802404 · Cited by 347
Soft Robots Manufacturing: A Review
Schmitt, F., Piccin, O., Barbé, L., & Bayle, B. (2018) · Frontiers in Robotics and AI · doi:10.3389/frobt.2018.00084 · Cited by 343
Bai, R., Yang, J., & Suo, Z. (2019) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2018.12.001 · Cited by 346
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
Synthesis, Assembly, and Applications of Hybrid Nanostructures for Biosensing
Zhang, S., Geryak, R., Geldmeier, J., Kim, S., & Tsukruk, V. V. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00088 · Cited by 340
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Sequential self-folding of polymer sheets
Liu, Y., Shaw, B., Dickey, M. D., & Genzer, J. (2017) · Science Advances · doi:10.1126/sciadv.1602417 · Cited by 335
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
McCracken, J. M., Donovan, B. R., & White, T. J. (2020) · Advanced Materials · doi:10.1002/adma.201906564 · Cited by 333
4D printing and stimuli-responsive materials in biomedical aspects
Lui, Y. S., Sow, W. T., Tan, L. P., Wu, Y., Lai, Y., & Li, H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.005 · Cited by 333
Hwang, J., Ejsmont, A., Freund, R., Goscianska, J., Schmidt, B. V. K. J., & Wuttke, S. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00871c · Cited by 333
Zhang, B., Li, H., Cheng, J., Ye, H., Sakhaei, A. H., Yuan, C., Rao, P., Zhang, Y., Chen, Z., Wang, R., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101298 · Cited by 330
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Universal inverse design of surfaces with thin nematic elastomer sheets
Aharoni, H., Xia, Y., Zhang, X., Kamien, R. D., & Yang, S. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1804702115 · Cited by 326
Substrate curvature as a cue to guide spatiotemporal cell and tissue organization
Callens, S. J. P., Uyttendaele, R. J. C., Fratila-Apachitei, L. E., & Zadpoor, A. A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119739 · Cited by 323
3D printing with cellulose materials
Wang, Q., Sun, J., Yao, Q., Ji, C., Liu, J., & Zhu, Q. (2018) · Cellulose · doi:10.1007/s10570-018-1888-y · Cited by 324
Roach, D. J., Yuan, C., Kuang, X., Li, V. C.-F., Blake, P., Romero, M. L., Hammel, I., Yu, K., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04401 · Cited by 319
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Architected Origami Materials: How Folding Creates Sophisticated Mechanical Properties
Li, S., Fang, H., Sadeghi, S., Bhovad, P., & Wang, K. (2019) · Advanced Materials · doi:10.1002/adma.201805282 · Cited by 320
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004226 · Cited by 319
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Evolution of 3D printed soft actuators
Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.09.028 · Cited by 314
Multifunctional magnetic soft composites: a review
Wu, S., Hu, W., Ze, Q., Sitti, M., & Zhao, R. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/abcb0c · Cited by 307
Hydrogel-based strong and fast actuators by electroosmotic turgor pressure
Na, H., Kang, Y.-W., Park, C. S., Jung, S., Kim, H.-Y., & Sun, J.-Y. (2022) · Science · doi:10.1126/science.abm7862 · Cited by 308
Responsive materials architected in space and time
Xia, X., Spadaccini, C. M., & Greer, J. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00450-z · Cited by 295
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Self-citationShape memory polymers for composites
Mu, T., Liu, L., Lan, X., Liu, Y., & Leng, J. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.018 · Cited by 302
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Tailoring Gelation Mechanisms for Advanced Hydrogel Applications
Nele, V., Wojciechowski, J. P., Armstrong, J. P. K., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002759 · Cited by 300
Transformer Hydrogels: A Review
Erol, O., Pantula, A., Liu, W., & Gracias, D. H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900043 · Cited by 293
Jones, T. J., Jambon-Puillet, E., Marthelot, J., & Brun, P.-T. (2021) · Nature · doi:10.1038/s41586-021-04029-6 · Cited by 290
Fabrication of Bioinspired Hydrogels: Challenges and Opportunities
Fan, H., & Gong, J. P. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00238 · Cited by 292
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
A review of 3D and 4D printing of natural fibre biocomposites
Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108911 · Cited by 280
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Hydrogel-Based Sensor Networks: Compositions, Properties, and Applications—A Review
Sun, X., Agate, S., Salem, K. S., Lucia, L., & Pal, L. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01011 · Cited by 279
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
4D Printing of Reversible Shape Morphing Hydrogel Structures
Naficy, S., Gately, R., Gorkin, R., Xin, H., & Spinks, G. M. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600212 · Cited by 276
Xiong, R., Grant, A. M., Ma, R., Zhang, S., & Tsukruk, V. V. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.01.002 · Cited by 276
Three-dimensional printing of functionally graded liquid crystal elastomer
Wang, Z., Wang, Z., Zheng, Y., He, Q., Wang, Y., & Cai, S. (2020) · Science Advances · doi:10.1126/sciadv.abc0034 · Cited by 274
Frey, M., Widner, D., Segmehl, J. S., Casdorff, K., Keplinger, T., & Burgert, I. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18646 · Cited by 271
Ning, X., Wang, X., Zhang, Y., Yu, X., Choi, D., Zheng, N., Kim, D. S., Huang, Y., Zhang, Y., & Rogers, J. A. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800284 · Cited by 273
Zhang, X., Chen, L., Lim, K. H., Gonuguntla, S., Lim, K. W., Pranantyo, D., Yong, W. P., Yam, W. J. T., Low, Z., Teo, W. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201804540 · Cited by 273
Functional Biomaterials for Bone Regeneration: A Lesson in Complex Biology
Armiento, A. R., Hatt, L. P., Sanchez Rosenberg, G., Thompson, K., & Stoddart, M. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909874 · Cited by 273
Jiao, D., Zhu, Q. L., Li, C. Y., Zheng, Q., & Wu, Z. L. (2022) · Accounts of Chemical Research · doi:10.1021/acs.accounts.2c00046 · Cited by 273
3D printing for membrane separation, desalination and water treatment
Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100486 · Cited by 269
Triplet fusion upconversion nanocapsules for volumetric 3D printing
Sanders, S. N., Schloemer, T. H., Gangishetty, M. K., Anderson, D., Seitz, M., Gallegos, A. O., Stokes, R. C., & Congreve, D. N. (2022) · Nature · doi:10.1038/s41586-022-04485-8 · Cited by 269
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
3D Printed Sensors for Biomedical Applications: A Review
Han, T., Kundu, S., Nag, A., & Xu, Y. (2019) · Sensors · doi:10.3390/s19071706 · Cited by 266
Magnetic programming of 4D printed shape memory composite structures
Zhang, F., Wang, L., Zheng, Z., Liu, Y., & Leng, J. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105571 · Cited by 267
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Emerging Technologies in Multi‐Material Bioprinting
Ravanbakhsh, H., Karamzadeh, V., Bao, G., Mongeau, L., Juncker, D., & Zhang, Y. S. (2021) · Advanced Materials · doi:10.1002/adma.202104730 · Cited by 266
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Cecen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 267
Digital light processing of liquid crystal elastomers for self-sensing artificial muscles
Li, S., Bai, H., Liu, Z., Zhang, X., Huang, C., Wiesner, L. W., Silberstein, M., & Shepherd, R. F. (2021) · Science Advances · doi:10.1126/sciadv.abg3677 · Cited by 269
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
3D printed medicines: A new branch of digital healthcare
Awad, A., Trenfield, S. J., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.07.024 · Cited by 265
Recent advances in multi-material additive manufacturing: methods and applications
Han, D., & Lee, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.004 · Cited by 266
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Polymeric Systems for Bioprinting
Bedell, M. L., Navara, A. M., Du, Y., Zhang, S., & Mikos, A. G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00834 · Cited by 258
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Light to Shape the Future: From Photolithography to 4D Printing
del Barrio, J., & Sánchez‐Somolinos, C. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900598 · Cited by 258
4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
Origami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256
Zhu, Q. L., Du, C., Dai, Y., Daab, M., Matejdes, M., Breu, J., Hong, W., Zheng, Q., & Wu, Z. L. (2020) · Nature Communications · doi:10.1038/s41467-020-18801-1 · Cited by 252
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing
Zhang, B., Li, S., Hingorani, H., Serjouei, A., Larush, L., Pawar, A. A., Goh, W. H., Sakhaei, A. H., Hashimoto, M., Kowsari, K., et al. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00673c · Cited by 252
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Jang, T.-S., Jung, H.-D., Pan, H. M., Han, W. T., Chen, S., & Song, J. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.126 · Cited by 251
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.