Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 701–800 of 1,000
Advances in biomimetic stimuli responsive soft grippers
Yoon, C. (2019) · Nano Convergence · doi:10.1186/s40580-019-0191-4 · Cited by 96
Tao, Y., Lee, Y.-C., Liu, H., Zhang, X., Cui, J., Mondoa, C., Babaei, M., Santillan, J., Wang, G., Luo, D., et al. (2021) · Science Advances · doi:10.1126/sciadv.abf4098 · Cited by 103
Hwangbo, H., Lee, H., Roh, E. J., Kim, W.-J., Joshi, H. P., Kwon, S. Y., Choi, U. Y., Han, I., & Kim, G. (2021) · Applied Physics Reviews · doi:10.1063/5.0035601 · Cited by 94
Biology and bioinspiration of soft robotics: Actuation, sensing, and system integration
Ren, L., Li, B., Wei, G., Wang, K., Song, Z., Wei, Y., Ren, L., & Liu, Q. (2021) · iScience · doi:10.1016/j.isci.2021.103075 · Cited by 101
Structurally anisotropic hydrogels for tissue engineering
Khuu, N., Kheiri, S., & Kumacheva, E. (2021) · Trends in Chemistry · doi:10.1016/j.trechm.2021.09.009 · Cited by 101
Hajiesmaili, E., Larson, N., Lewis, J. A., & Clarke, D. R. (2022) · Science Advances · doi:10.1126/sciadv.abn9198 · Cited by 98
Self-citationTopology in soft and biological matter
Tubiana, L., Alexander, G. P., Barbensi, A., Buck, D., Cartwright, J. H. E., Chwastyk, M., Cieplak, M., Coluzza, I., Čopar, S., Craik, D. J., et al. (2024) · Physics Reports · doi:10.1016/j.physrep.2024.04.002 · Cited by 128
Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets
Bauhofer, A. A., Krödel, S., Rys, J., Bilal, O. R., Constantinescu, A., & Daraio, C. (2017) · Advanced Materials · doi:10.1002/adma.201703024 · Cited by 93
Grayscale gel lithography for programmed buckling of non-Euclidean hydrogel plates
Na, J., Bende, N. P., Bae, J., Santangelo, C. D., & Hayward, R. C. (2016) · Soft Matter · doi:10.1039/c6sm00714g · Cited by 93
Wu, L., Dong, Z., Du, H., Li, C., Fang, N. X., & Song, Y. (2018) · Research · doi:10.1155/2018/4795604 · Cited by 100
Shape-morphing living composites
Rivera‐Tarazona, L. K., Bhat, V. D., Kim, H., Campbell, Z. T., & Ware, T. H. (2020) · Science Advances · doi:10.1126/sciadv.aax8582 · Cited by 91
Prendergast, M. E., Davidson, M. D., & Burdick, J. A. (2021) · Biofabrication · doi:10.1088/1758-5090/ac25cc · Cited by 90
Functionalized Hydrogels for Articular Cartilage Tissue Engineering
Zhou, L., Guo, P., D’Este, M., Tong, W., Xu, J., Yao, H., Stoddart, M. J., van Osch, G. J. V. M., Ho, K. K., Li, Z., et al. (2022) · Engineering · doi:10.1016/j.eng.2022.03.008 · Cited by 102
Emerging application of 3D-printing techniques in lithium batteries: From liquid to solid
Gao, X., Zheng, M. L., Yang, X., Sun, R., Zhang, J., & Sun, X. A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.07.016 · Cited by 91
Multistable Thermal Actuators Via Multimaterial 4D Printing
Jeong, H. Y., Lee, E., Ha, S., Kim, N., & Jun, Y. C. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800495 · Cited by 93
Sustainable Biomass Materials for Biomedical Applications
Li, Y. E. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01634 · Cited by 94
Recent progress in 4D printing of stimuli-responsive polymeric materials
Ma, S., Zhang, Y., Wang, M., Liang, Y., Ren, L., & Ren, L. (2019) · Science China Technological Sciences · doi:10.1007/s11431-019-1443-1 · Cited by 99
Stimuli-responsive cellulose nanomaterials for smart applications
Zhu, Q., Liu, S., Sun, J., Liu, J., Kirubaharan, C. J., Chen, H., Xu, W., & Wang, Q. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115933 · Cited by 97
Zhuang, Y., Song, W., Ning, G., Sun, X., Sun, Z., Xu, G., Zhang, B., Chen, Y., & Tao, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.047 · Cited by 89
Challenges and Status on Design and Computation for Emerging Additive Manufacturing Technologies
Leung, Y., Kwok, T.-H., Li, X., Yang, Y., Wang, C. C. L., & Chen, Y. (2018) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4041913 · Cited by 95
4D printed anisotropic structures with tailored mechanical behaviors and shape memory effects
Liu, T., Liu, L., Zeng, C., Liu, Y., & Leng, J. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107935 · Cited by 92
Peng, W., Zhang, G., Liu, J., Nie, S., Wu, Y., Deng, S., Fang, G., Zhou, J., Song, J., Qian, J. W., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000522 · Cited by 90
Chávez-Madero, C., Derby, M. D. D. L., Samandari, M., Ceballos‐González, C. F., Bolívar‐Monsalve, E. J., Mendoza-Buenrostro, C., Holmberg, S., Garza-Flores, N. A., Almajhadi, M. A., González‐Gamboa, I., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab84cc · Cited by 95
Programmable and reprocessable multifunctional elastomeric sheets for soft origami robots
Zhang, S., Ke, X., Jiang, Q., Ding, H., & Wu, Z. (2021) · Science Robotics · doi:10.1126/scirobotics.abd6107 · Cited by 92
Zheng, F., Xiao, Y., Liu, H., Fan, Y., & Dao, M. (2021) · Advanced Biology · doi:10.1002/adbi.202000024 · Cited by 107
Strong, Ultrafast, Reprogrammable Hydrogel Actuators with Muscle-Mimetic Aligned Fibrous Structures
Jiang, Z., Seraji, S. M., Tan, X., Zhang, X., Dinh, T., Mollazade, M., Rowan, A. E., Whittaker, A. K., Song, P., & Wang, H. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c02312 · Cited by 90
4D printed programmable auxetic metamaterials with shape memory effects
Wan, M., Yu, K., & Sun, H. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114791 · Cited by 92
The Role of 3D Printing Technologies in Soft Grippers
Xin, Y., Zhou, X., Bark, H., & Lee, P. S. (2023) · Advanced Materials · doi:10.1002/adma.202307963 · Cited by 99
Programmable Multi‐Responsive Nanocellulose‐Based Hydrogels With Embodied Logic
Arsuffi, B., Siqueira, G. D. F., Nyström, G., Titotto, S., Magrini, T., & Daraio, C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202409864 · Cited by 99
Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires
Malakooti, M. H., Julé, F., & Sodano, H. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13643 · Cited by 95
4D printing: a critical review of current developments, and future prospects
Ali, M. H., Abilgaziyev, A., & Adair, D. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04258-0 · Cited by 100
3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices
Hales, S. H., Tokita, E., Neupane, R., Ghosh, U., Elder, B., Wirthlin, D. J., & Kong, Y. L. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab5f29 · Cited by 91
Multi‐Dimensional Printing for Bone Tissue Engineering
Qu, M., Wang, C., Zhou, X., Libanori, A., Jiang, X., Xu, W., Zhu, S., Chen, Q., Sun, W., & Khademhosseini, A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202001986 · Cited by 87
Femtosecond Laser 4D Printing of Light‐Driven Intelligent Micromachines
Deng, C., Liu, Y., Fan, X., Jiao, B., Zhang, Z., Zhang, M., Chen, F., Gao, H., Deng, L., & Xiong, W. H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211473 · Cited by 96
Sustainable Robots 4D Printing
Soleimanzadeh, H., Rolfe, B., Bodaghi, M., Jamalabadi, M., Zhang, X., & Zolfagharian, A. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202300289 · Cited by 95
Morphlour: Personalized Flour-based Morphing Food Induced by Dehydration or Hydration Method
Tao, Y., Do, Y., Yang, H., Lee, Y.-C., Wang, G., Mondoa, C., Cui, J., Wang, W., & Yao, L. (2019) · ACM Symposium on User Interface Software and Technology (UIST) · doi:10.1145/3332165.3347949 · Cited by 106
Guen, M.-J. L., Hill, S., Smith, D. A., Theobald, B., Gaugler, E. C., Barakat, A., & Mayer‐Laigle, C. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00735 · Cited by 87
Water-responsive materials for sustainable energy applications
Park, Y., & Chen, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02896g · Cited by 92
4D Printing of Engineered Living Materials
Rivera‐Tarazona, L. K., Shukla, T. N., Singh, K. A., Gaharwar, A. K., Campbell, Z. T., & Ware, T. H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106843 · Cited by 93
Kouka, M. A., Abbassi, F., Habibi, M., Chabert, F., Zghal, A., & Garnier, C. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200650 · Cited by 95
Porath, L. E., Soman, B., Jing, B. B., & Evans, C. M. (2022) · ACS Macro Letters · doi:10.1021/acsmacrolett.2c00038 · Cited by 93
Shape-Changing Photodegradable Hydrogels for Dynamic 3D Cell Culture
Käpylä, E., Delgado, S. M., & Kasko, A. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05527 · Cited by 91
3D‐Printed Organic–Ceramic Complex Hybrid Structures with High Silica Content
Shukrun, E., Cooperstein, I., & Magdassi, S. (2018) · Advanced Science · doi:10.1002/advs.201800061 · Cited by 86
Topographic Mechanics and Applications of Liquid Crystalline Solids
Warner, M. (2019) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-031119-050738 · Cited by 85
Mohan, D., Teong, Z. K., Bakir, A. N., Sajab, M. S., & Kaco, H. (2020) · Polymers · doi:10.3390/polym12091876 · Cited by 99
Current progress of 4D-printing technology
Subeshan, B., Baddam, Y., & Asmatulu, E. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00182-6 · Cited by 98
Ouni, E., Peaucelle, A., Haas, K. T., Kerk, O. V., Dolmans, M., Tuuri, T., Otala, M., & Amorim, C. A. (2021) · Nature Communications · doi:10.1038/s41467-021-25934-4 · Cited by 103
Duigou, A. L., Fruleux, T., Matsuzaki, R., Chabaud, G., Ueda, M., & Castro, M. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110158 · Cited by 88
Moud, A. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.148 · Cited by 90
Programmable aniso-electrodeposited modular hydrogel microrobots
Zheng, Z., Wang, H., Demir, S. Ö., Huang, Q., Fukuda, T., & Sitti, M. (2022) · Science Advances · doi:10.1126/sciadv.ade6135 · Cited by 86
Advanced supramolecular design for direct ink writing of soft materials
Tang, M., Zhong, Z., & Ke, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01011a · Cited by 93
Joshi, A., Choudhury, S., Baghel, V. S., Ghosh, S., Gupta, S., Debrupa Lahiri, A., Ananthasuresh, G. K., & Chatterjee, K. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300701 · Cited by 94
Light-triggered multi-joint microactuator fabricated by two-in-one femtosecond laser writing
Chen, X., Ren, Z., Zhang, L., Yang, L., Wang, D., Hu, Y., Li, J., Chu, J., Zhang, L., & Wu, D. Q. (2023) · Nature Communications · doi:10.1038/s41467-023-40038-x · Cited by 95
4D printing of liquid crystal elastomer composites with continuous fiber reinforcement
Jiang, H., Chung, C., Dunn, M. L., & Yu, K. (2024) · Nature Communications · doi:10.1038/s41467-024-52716-5 · Cited by 115
Assembly and Self‐Assembly of Nanomembrane Materials—From 2D to 3D
Huang, G., & Mei, Y. (2018) · Small · doi:10.1002/smll.201703665 · Cited by 91
Inside-Out 3D Reversible Ion-Triggered Shape-Morphing Hydrogels
Du, X., Cui, H., Zhao, Q., Wang, J., Chen, H., & Wang, Y. (2019) · Research · doi:10.34133/2019/6398296 · Cited by 97
Review of mechanisms and deformation behaviors in 4D printing
Ding, H., Zhang, X., Liu, Y., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03871-3 · Cited by 90
Highly tunable bioadhesion and optics of 3D printable PNIPAm/cellulose nanofibrils hydrogels
Sun, X., Tyagi, P., Agate, S., McCord, M., Lucia, L. A., & Pal, L. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115898 · Cited by 92
Preliminary 3D printing of large inclined-shaped alumina ceramic parts by direct ink writing
Yang, L., Zeng, X., Ditta, A., Feng, B., Su, L., & Zhang, Y. (2020) · Journal of Advanced Ceramics · doi:10.1007/s40145-020-0369-6 · Cited by 90
Wang, Q., Tian, X., Zhang, D., Zhou, Y., Yan, W., & Li, D. (2023) · Nature Communications · doi:10.1038/s41467-023-39566-3 · Cited by 105
4D printed shape-shifting biomaterials for tissue engineering and regenerative medicine applications
Kalogeropoulou, M., Díaz‐Payno, P. J., Mirzaali, M. J., van Osch, G. J. V. M., Fratila-Apachitei, L. E., & ZADPOOR, A. A. (2024) · Biofabrication · doi:10.1088/1758-5090/ad1e6f · Cited by 106
A Review of Hydrogel Fiber: Design, Synthesis, Applications, and Futures
Chen, G., Yang, Z., Pan, H., Zhang, J., Guo, Y., Zhou, Z., Zheng, J., Zhang, Z., Cao, R., Hou, K., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00159 · Cited by 95
Progress in the Field of Water‐ and/or Temperature‐Triggered Polymer Actuators
Agarwal, S., Jiang, S., & Chen, Y. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800548 · Cited by 84
Guo, Y., Liu, Y., Liu, J., Zhao, J., Zhang, H., & Zhang, Z. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105903 · Cited by 84
Capillary‐Force‐Driven Self‐Assembly of 4D‐Printed Microstructures
Liu, X., Wei, M., Wang, Q., Tian, Y., Han, J., Gu, H., Ding, H., Chen, Q., Zhou, K., & Gu, Z. (2021) · Advanced Materials · doi:10.1002/adma.202100332 · Cited by 84
Tamo, A. K., Doench, I., Walter, L., Montembault, A., Sudre, G., David, L., Helguera, A. M., Selig, M., Rolauffs, B., Bernstein, A., et al. (2021) · Polymers · doi:10.3390/polym13101663 · Cited by 92
Fang, J., Zhuang, Y., Liu, K., Chen, Z., Liu, Z., Kong, T., Xu, J., & Cheng, Q. (2022) · Advanced Science · doi:10.1002/advs.202104347 · Cited by 88
Magneto‐Thermomechanically Reprogrammable Mechanical Metamaterials
Zou, B., Liang, Z., Zhong, D., Cui, Z., Xiao, K., Shao, S., & Ju, J. (2022) · Advanced Materials · doi:10.1002/adma.202207349 · Cited by 88
Light‐Fueled Nonreciprocal Self‐Oscillators for Fluidic Transportation and Coupling
Deng, Z., Zhang, H., Priimägi, A., & Zeng, H. (2022) · Advanced Materials · doi:10.1002/adma.202209683 · Cited by 94
Mu, Q., Dunn, C. K., Wang, L., Dunn, M. L., Qi, H. J., & Wang, T. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa5cca · Cited by 91
Smart biomimetic micro/nanostructures based on liquid crystal elastomers and networks
Shahsavan, H., Yu, L., Jákli, A. I., & Zhao, B. (2017) · Soft Matter · doi:10.1039/c7sm01466j · Cited by 84
On-demand orbital maneuver of multiple soft robots via hierarchical magnetomotility
Won, S., Kim, S., Park, J. E., Jeon, J., & Wie, J. J. (2019) · Nature Communications · doi:10.1038/s41467-019-12679-4 · Cited by 91
Biomimetic Nonuniform, Dual-Stimuli Self-Morphing Enabled by Gradient Four-Dimensional Printing
Song, Z., Ren, L., Zhao, C., Liu, H., Yu, Z., Liu, Q., & Ren, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17577 · Cited by 87
The chemistry behind 4D printing
Pinho, A. C., Buga, C. S., & Piedade, A. P. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100611 · Cited by 94
Materials engineering, processing, and device application of hydrogel nanocomposites
Cha, G. D., Lee, W. H., Lim, C., Choi, M. K., & Kim, D. (2020) · Nanoscale · doi:10.1039/d0nr01456g · Cited by 88
3D printing of Fe3O4 functionalized graphene-polymer (FGP) composite microarchitectures
Wajahat, M., Kim, J. H., Ahn, J., Lee, S., Bae, J., Pyo, J., & Seol, S. K. (2020) · Carbon · doi:10.1016/j.carbon.2020.05.045 · Cited by 87
Li, Y., Yu, H., Yu, K., Guo, X., & Wang, X. S. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100338 · Cited by 89
Regenerative Medicine Technologies to Treat Dental, Oral, and Craniofacial Defects
Latimer, J. M., Maekawa, S., Yao, Y., Wu, D. T. S., Chen, M., & Giannobile, W. V. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.704048 · Cited by 90
Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook
Zhang, D., Lim, W. Y., Duran, S. S. F., Loh, X. J., & Suwardi, A. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02553 · Cited by 88
Recent advances in nature-inspired antifouling membranes for water purification
Zhang, X., Ma, J., Zheng, J., Dai, R., Wang, X., & Wang, Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134425 · Cited by 88
Unperceivable motion mimicking hygroscopic geometric reshaping of pine cones
Zhang, F., Yang, M., Xu, X.-T., Liu, X., Liu, H., Jiang, L., & Wang, S. (2022) · Nature Materials · doi:10.1038/s41563-022-01391-2 · Cited by 83
A monolithic hydro/organo macro copolymer actuator synthesized via interfacial copolymerization
Zhang, F., Fan, J., Zhang, P., Liu, M., Meng, J., Jiang, L., & Wang, S. (2017) · NPG Asia Materials · doi:10.1038/am.2017.61 · Cited by 83
The Design for Additive Manufacturing Worksheet
Booth, J., Alperovich, J., Reid, T., & Karthik Ramani, A. (2016) · doi:10.1115/detc2016-60407 · Cited by 82
Zhao, Q., Liang, Y., Ren, L., Yu, Z., Zhang, Z., Qiu, F., & Ren, L. (2018) · Journal of Materials Chemistry B · doi:10.1039/c7tb02853a · Cited by 83
Zhang, M., Wang, Y., Jian, M., Wang, C., Liang, X., Niu, J., & Zhang, Y. (2020) · Advanced Science · doi:10.1002/advs.201903048 · Cited by 86
Seo, J. W., Shin, S. R., Park, Y. J., & Bae, H. (2020) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-020-00264-6 · Cited by 85
Feng, P., Yang, F., Jia, J., Zhang, J., Tan, W., & Shuai, C. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad7e5f · Cited by 97
Extreme Mechanics: Self-Folding Origami
Santangelo, C. D. (2017) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-031016-025316 · Cited by 81
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
4D-printed self-recovered triboelectric nanogenerator for energy harvesting and self-powered sensor
Huang, L., Han, J.-C., Chen, S., Sun, Z., Dai, X., Ge, P., Zhao, C.-H., Zheng, Q.-Q., Sun, F.-C., & Hao, J. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105873 · Cited by 86
Zhang, S., Ren, D., Zhao, Q., Peng, M., Wang, X., Zhang, Z., Liu, W., & Huang, F. (2025) · Nature Communications · doi:10.1038/s41467-025-57692-y · Cited by 81
Wang, Z. J., Zhu, C. N., Hong, W., Wu, Z. L., & Zheng, Q. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb02178f · Cited by 81
Beaumont, M., Bacher, M., Opietnik, M., Gindl‐Altmutter, W., Potthast, A., & Rosenau, T. (2018) · Molecules · doi:10.3390/molecules23061427 · Cited by 85
Photoactivated Polymeric Bilayer Actuators Fabricated via 3D Printing
Hagaman, D., Leist, S. K., Zhou, J. G., & Ji, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08503 · Cited by 86
Photomechanical Azobenzene Crystals
Taniguchi, T., Asahi, T., & Koshima, H. (2019) · Crystals · doi:10.3390/cryst9090437 · Cited by 80
Comparative study of robotic artificial actuators and biological muscle
Liang, W., Liu, H., Wang, K., Qian, Z., Ren, L., & Ren, L. (2014) · Advances in Mechanical Engineering · doi:10.1177/1687814020933409 · Cited by 92
Li, X., Chen, X., Jin, Z., Li, P., & Xiao, D. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00745e · Cited by 81
Recent progress in field-assisted additive manufacturing: materials, methodologies, and applications
Hu, Y. (2020) · Materials Horizons · doi:10.1039/d0mh01322f · Cited by 83
Nature-inspired reentrant surfaces
Li, J., Han, X., Li, W., Yang, L., Li, X., & Wang, L. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101064 · Cited by 83
4D printed TMP origami metamaterials with programmable mechanical properties
Wan, M., Yu, K., Gu, J., Zeng, H., Sun, H., & Khatibi, A. A. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108275 · Cited by 84
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.