Biomimetic 4D printing
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [36]
Citations
Cites
Mechanics of Laminated Composite Plates and Shells
Reddy, J. N. (2003) · CRC Press eBooks · doi:10.1201/b12409 · Cited by 3,845
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Haraguchi, K., & Takehisa, T. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020816)14:16<1120::aid-adma1120>3.0.co;2-9 · Cited by 2,108
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citation4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Self-citationA method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Cited by
Items 601–700 of 1,000
Direct 4D printing of ceramics driven by hydrogel dehydration
Wang, R., Yuan, C., Cheng, J., He, X., Ye, H., Jian, B., Li, H., Bai, J., & Ge, Q. (2024) · Nature Communications · doi:10.1038/s41467-024-45039-y · Cited by 112
Machine learning-enabled forward prediction and inverse design of 4D-printed active plates
Sun, X., Yue, L., Yu, L., Forte, C. T., Armstrong, C. D., Zhou, K., Demoly, F., Zhao, R. R., & Qi, H. J. (2024) · Nature Communications · doi:10.1038/s41467-024-49775-z · Cited by 122
3D Printing of Hydrogel Architectures with Complex and Controllable Shape Deformation
Ji, Z., Yan, C., Yu, B., Zhang, X., Cai, M., Jia, X., Wang, X., & Zhou, F. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800713 · Cited by 112
Stimuli-responsive composite biopolymer actuators with selective spatial deformation behavior
Wang, Y., Huang, W., Wang, Y., Mu, X., Ling, S., Yu, H., Chen, W., Guo, C., Watson, M. C., Yu, Y., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2002996117 · Cited by 114
Nanocellulose: a promising green treasure from food wastes to available food materials
Ma, T., Hu, X., Lu, S., Liao, X., Song, Y., & Hu, X. (2020) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2020.1832440 · Cited by 116
Li, J., An, X., Liang, J., Zhou, Y., & Sun, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.10.041 · Cited by 111
Chan, C. L. C., Lei, I. M., van de Kerkhof, G. T., Parker, R., Richards, K. D., Evans, R. C., Huang, Y. Y. S., & Vignolini, S. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202108566 · Cited by 112
Lee, Y., Kim, J., Bozuyuk, U., Dogan, N. O., Khan, M. T. A., Shiva, A., Wild, A., & Sitti, M. (2022) · Advanced Materials · doi:10.1002/adma.202209812 · Cited by 124
3D freeform printing of silk fibroin
Rodriguez, M. J., Dixon, T. A., Cohen, E., Huang, W., Omenetto, F. G., & Kaplan, D. L. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.035 · Cited by 107
2D material programming for 3D shaping
Nojoomi, A., Jeon, J., & Yum, K. (2021) · Nature Communications · doi:10.1038/s41467-021-20934-w · Cited by 108
3D printing of shape-morphing and antibacterial anisotropic nanocellulose hydrogels
Fourmann, O., Hausmann, M. K., Neels, A., Schubert, M., Nyström, G., Zimmermann, T., & Siqueira, G. D. F. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117716 · Cited by 115
Review of 4D printing materials and reinforced composites: Behaviors, applications and challenges
Alshahrani, H. (2021) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2021.03.006 · Cited by 134
4D bioprinting of programmed dynamic tissues
Lai, J., Liu, Y., Lü, G., Yung, P. S., Wang, X., Tuan, R. S., & Li, Z. A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.03.033 · Cited by 169
Solid organ fabrication: comparison of decellularization to 3D bioprinting
Jung, J. P., Bhuiyan, D. B., & Ogle, B. M. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0074-2 · Cited by 107
Advanced Material Strategies for Next-Generation Additive Manufacturing
Chang, J., He, J., Mao, M., Zhou, W., Lei, Q., Li, X., Li, D., Chua, C.-K., & Zhao, X. (2018) · Materials · doi:10.3390/ma11010166 · Cited by 104
Bionic intelligent hydrogel actuators with multimodal deformation and locomotion
Zhao, Q., Liang, Y., Ren, L., Yu, Z., Zhang, Z., & Ren, L. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.025 · Cited by 107
Low Solids Emulsion Gels Based on Nanocellulose for 3D-Printing
Huan, S., Ajdary, R., Bai, L., Klar, V., & Rojas, O. J. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01224 · Cited by 111
Bone‐Adhesive Anisotropic Tough Hydrogel Mimicking Tendon Enthesis
Choi, S., Moon, J. R., Park, N., Im, J., Kim, Y. E., Kim, J., & Kim, J. (2022) · Advanced Materials · doi:10.1002/adma.202206207 · Cited by 113
Bio-inspired self-shaping ceramics
Bargardi, F. L., Ferrand, H. L., Libanori, R., & Studart, A. R. (2016) · Nature Communications · doi:10.1038/ncomms13912 · Cited by 115
Direct-write 3D printing of NdFeB bonded magnets
Compton, B. G., Kemp, J. W., Novikov, T. V., Pack, R. C., Nlebedim, C. I., Duty, C., Rios, O. R., & Paranthaman, M. P. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1221097 · Cited by 114
3D‐Printed Silicone Soft Architectures with Programmed Magneto‐Capillary Reconfiguration
Roh, S., Okello, L. B., Golbasi, N. C., Hankwitz, J. P., Liu, J. A. ‐., Tracy, J. B., & Velev, O. D. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800528 · Cited by 107
3D Nanoprinting of Perovskites
Chen, M., Yang, J., Wang, Z., Xu, Z., Lee, H., Lee, H., Zhou, Z., Feng, S., Lee, S., Pyo, J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904073 · Cited by 106
Zhu, H., Yang, H., Ma, Y., Lu, T. J., Xu, F., Genin, G. M., & Lin, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000639 · Cited by 113
Selective Laser Sintering-Based 4D Printing of Magnetism-Responsive Grippers
Wu, H., Wang, O., Tian, Y., Wang, M., Su, B., Yan, C., Zhou, K., & Shi, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17429 · Cited by 117
3D and 4D lithography of untethered microrobots
Rajabasadi, F., Schwarz, L., Medina‐Sánchez, M., & Schmidt, O. G. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100808 · Cited by 113
Advancements in 3D Cell Culture Systems for Personalizing Anti-Cancer Therapies
Law, A. M. K., de la Fuente, L. R., Grundy, T. J., Fang, G., Valdés‐Mora, F., & Gallego‐Ortega, D. (2021) · Frontiers in Oncology · doi:10.3389/fonc.2021.782766 · Cited by 119
Polymerization Induced Microphase Separation for the Fabrication of Nanostructured Materials
Lee, K., Corrigan, N. A., & Boyer, C. A. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202307329 · Cited by 114
Liu, Q., Dong, X., Qi, H., Zhang, H., Li, T., Zhao, Y., Li, G., & Zhai, W. (2024) · Nature Communications · doi:10.1038/s41467-024-47597-7 · Cited by 125
Bioinspired multi-responsive soft actuators controlled by laser tailored graphene structures
Deng, H., Zhang, C., Su, J., Xie, Y., Zhang, C., & Lin, J. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01285g · Cited by 104
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 115
Nanocellulose: Recent Advances Toward Biomedical Applications
Ong, X.-R., Chen, A. X., Li, N., Yang, Y. Y., & Luo, H. (2022) · Small Science · doi:10.1002/smsc.202200076 · Cited by 121
3D and 4D Bioprinting Technologies: A Game Changer for the Biomedical Sector?
Noroozi, R., Arif, Z. U., Taghvaei, H., Khalid, M. Y., Sahbafar, H., Hadi, A., Sadeghianmaryan, A., & Chen, D. (2023) · Annals of Biomedical Engineering · doi:10.1007/s10439-023-03243-9 · Cited by 118
Zeng, C., Liu, L., Lin, C., Xin, X., Liu, Y., & Leng, J. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108085 · Cited by 106
4DMesh: 4D Printing Morphing Non-Developable Mesh Surfaces
Wang, G., Yang, H., Yan, Z., Ulu, N. G., Tao, Y., Gu, J., Kara, L. B., & Yao, L. (2018) · ACM Symposium on User Interface Software and Technology (UIST) · doi:10.1145/3242587.3242625 · Cited by 116
Spatially modulated stiffness on hydrogels for soft and stretchable integrated electronics
Liu, H., Li, M., Liu, S., Jia, P., Guo, X., Feng, S., Lu, T. J., Yang, H., Li, F., & Xu, F. (2019) · Materials Horizons · doi:10.1039/c9mh01211g · Cited by 104
Additive manufacturing and applications of nanomaterial-based sensors
Sui, X., Downing, J. R., Hersam, M. C., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.001 · Cited by 111
Two-photon polymerization-based 4D printing and its applications
Jian, B., Li, H., He, X., Wang, R., Yang, H. Y., & Ge, Q. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acfc03 · Cited by 120
Multimaterial extrusion 3D printing printheads
Brown, N. C., Ames, D. C., & Mueller, J. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00809-y · Cited by 147
Issues affecting the longevity of the continuous peritoneal dialysis therapy.
Kawaguchi, Y., Hasegawa, T., Nakayama, M., Kubo, H., & Shigematu, T. (1997) · PubMed · Cited by 127
Stimuli-Responsive Polymers for Soft Robotics
Zhao, Y., Hua, M., Yan, Y., Wu, S., Alsaid, Y., & He, X. (2021) · Annual Review of Control Robotics and Autonomous Systems · doi:10.1146/annurev-control-042920-014327 · Cited by 108
Wei, X., Lian, C., Wang, Y., Sun, Y., Ma, C., Yang, X., Jiang, S., & Duan, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134258 · Cited by 103
Dudek, K. K., Martínez, J. A. I., Ulliac, G., Hirsinger, L., Wang, L., Laude, V., & Kadic, M. (2023) · Advanced Materials · doi:10.1002/adma.202210993 · Cited by 107
Increasing the Dimensionality of Soft Microstructures through Injection‐Induced Self‐Folding
Ranzani, T., Russo, S., Bartlett, N. W., Wehner, M. F., & Wood, R. J. (2018) · Advanced Materials · doi:10.1002/adma.201802739 · Cited by 105
Effects of architecture level on mechanical properties of hierarchical lattice materials
Yin, S., Chen, H., Li, J., Yu, T., & Xu, J. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.04.051 · Cited by 102
Additive Manufacturing of Epoxy Resins: Materials, Methods, and Latest Trends
Peerzada, M. H., Abbasi, S. A., Lau, K.-T., & Hameed, N. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06870 · Cited by 110
Chen, G., Wang, G., Tan, X., Hou, K., Meng, Q., Zhao, P., Wang, S., Zhang, J., Zhou, Z., Chen, T., et al. (2020) · National Science Review · doi:10.1093/nsr/nwaa209 · Cited by 102
Introducing Dynamic Bonds in Light‐based 3D Printing
Zhu, G., Houck, H. A., Spiegel, C. A., Selhuber‐Unkel, C., Hou, Y., & Blasco, E. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300456 · Cited by 126
Yao, Y., Yin, C., Hong, S., Chen, H., Shi, Q., Wang, J., Lu, X., & Zhou, N. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02448 · Cited by 103
Processing advances in liquid crystal elastomers provide a path to biomedical applications
Ambulo, C. P., Tasmim, S., Wang, S., Abdelrahman, M. K., Zimmern, P. E., & Ware, T. H. (2020) · Journal of Applied Physics · doi:10.1063/5.0021143 · Cited by 107
Zhao, H., Huang, Y., Lv, F., Liu, L., Gu, Q., & Wang, S. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105544 · Cited by 104
4D Printing of Hydrogels: Innovation in Material Design and Emerging Smart Systems for Drug Delivery
Tran, T. S., Balu, R., Mettu, S., Choudhury, N. R., & Dutta, N. K. (2022) · Pharmaceuticals · doi:10.3390/ph15101282 · Cited by 122
Lyu, Z., Wang, J., & Chen, Y. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ace090 · Cited by 121
Addressing Unmet Clinical Needs with 3D Printing Technologies
Ghosh, U., Ning, S., Wang, Y., & Kong, Y. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800417 · Cited by 107
3D printed cellulose nanocrystal composites through digital light processing
Li, V. C.-F., Kuang, X., Mulyadi, A., Hamel, C. M., Deng, Y., & Qi, H. J. (2019) · Cellulose · doi:10.1007/s10570-019-02353-9 · Cited by 108
Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds
Hausmann, M. K., Siqueira, G. D. F., Libanori, R., Kokkinis, D., Neels, A., Zimmermann, T., & Studart, A. R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904127 · Cited by 111
Abdal-hay, A., Raveendran, N. T., Fournier, B., & Ivanovski, S. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108158 · Cited by 100
4D-printed bi-material composite laminate for manufacturing reversible shape-change structures
Wang, Y., & Li, X. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108918 · Cited by 99
Design of untethered soft material micromachine for life-like locomotion
Wang, X., & Ho, G. W. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.014 · Cited by 101
CurveUps: shaping objects from flat plates with tension-actuated curvature
Гусейнов, Р. Э., Miguel, E., & Bickel, B. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3073709 · Cited by 121
4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 103
3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study
Middelkoop, V., Vamvakeros, A., de Wit, D., Jacques, S. D. M., Danaci, S., Jacquot, C., Vos, Y. D., Matras, D., Price, S. W. T., & Beale, A. M. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.07.013 · Cited by 109
Smart polymers for cell therapy and precision medicine
Huang, H.-J., Tsai, Y., Lin, S., & Hsu, S. (2019) · Journal of Biomedical Science · doi:10.1186/s12929-019-0571-4 · Cited by 110
4D Printing of Resorbable Complex Shape-Memory Poly(propylene fumarate) Star Scaffolds
Fer, G. L., & Becker, M. L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01444 · Cited by 103
Schwab, A., Hélary, C., Richards, R. G., Alini, M., Eglin, D., & D'Este, M. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2020.100058 · Cited by 99
Actuating Supramolecular Shape Memorized Hydrogel Toward Programmable Shape Deformation
Lu, H., Wu, B., Yang, X., Zhang, J., Jian, Y., Yan, H., Zhang, D., Xue, Q., & Chen, T. (2020) · Small · doi:10.1002/smll.202005461 · Cited by 99
Increasingly Intelligent Micromachines
Huang, T., Gu, H., & Nelson, B. J. (2022) · Annual Review of Control Robotics and Autonomous Systems · doi:10.1146/annurev-control-042920-013322 · Cited by 104
Reconfigurable 4D printing via mechanically robust covalent adaptable network shape memory polymer
Li, H., Zhang, B., Ye, H., Jian, B., He, X., Cheng, J., Sun, Z., Wang, R., Chen, Z., Lin, J., et al. (2024) · Science Advances · doi:10.1126/sciadv.adl4387 · Cited by 109
Kirigami/Origami‐Based Soft Deployable Reflector for Optical Beam Steering
Wang, W., Li, C., Rodrigue, H., Yuan, F., Han, M., Cho, M., & Ahn, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604214 · Cited by 98
Origami Biosystems: 3D Assembly Methods for Biomedical Applications
Bolaños Quiñones, V. A., Zhu, H., Solovev, A. A., Mei, Y., & Gracias, D. H. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800230 · Cited by 98
Wu, T., Jiang, P., Zhang, X., Guo, Y., Ji, Z., Jia, X., Wang, X., Zhou, F., & Liu, W. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107947 · Cited by 110
3D-Printing and Machine Learning Control of Soft Ionic Polymer-Metal Composite Actuators
Carrico, J. D., Hermans, T., Kim, K. J., & Leang, K. K. (2019) · Scientific Reports · doi:10.1038/s41598-019-53570-y · Cited by 106
Wu, H., Zhang, X., Ma, Z., Zhang, C., Ai, J., Chen, P., Yan, C., Su, B., & Shi, Y. (2020) · Advanced Science · doi:10.1002/advs.201903208 · Cited by 114
Nano/microstructures of shape memory polymers: from materials to applications
Zhang, F., Xia, Y., Liu, Y., & Leng, J. (2020) · Nanoscale Horizons · doi:10.1039/d0nh00246a · Cited by 100
Niendorf, K., & Raeymaekers, B. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001002 · Cited by 100
Chemical and Mechanical Tunability of 3D-Printed Dynamic Covalent Networks Based on Boronate Esters
Robinson, L. L., Self, J. L., Fusi, A. D., Bates, M. W., de Alaniz, J. R., Hawker, C. J., Bates, C. M., & Sample, C. S. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00257 · Cited by 99
Materials with Electroprogrammable Stiffness
Levine, D. J., Turner, K. T., & Pikul, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202007952 · Cited by 103
Nanoclay-Based Self-Supporting Responsive Nanocomposite Hydrogels for Printing Applications
Jin, Y., Shen, Y., Yin, J., Qian, J. W., & Huang, Y. H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00806 · Cited by 98
pH and Thermo Dual‐Responsive Fluorescent Hydrogel Actuator
Wu, B., Le, X., Jian, Y., Lü, W., Yang, Z., Zheng, Z., Théato, P., Zhang, J., Zhang, A., & Chen, T. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800648 · Cited by 99
Yuan, J., Yi, C., Jiang, H., Liu, F., & Cheng, G. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01002 · Cited by 99
Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer
Sol, J. A. H. P., Sentjens, H., Yang, L., Grossiord, N., Schenning, A. P. H. J., & Debije, M. G. (2021) · Advanced Materials · doi:10.1002/adma.202103309 · Cited by 106
Zhang, L., Yan, H., Zhou, J., Zhao, Z., Huang, J., Chen, L., Ru, Y., & Liu, M. (2022) · Advanced Materials · doi:10.1002/adma.202202193 · Cited by 103
Hierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
Zhang, Y., Yin, X., Zheng, M., Moorlag, C., Yang, J., & Wang, Z. L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12428k · Cited by 104
Han, I. K., Chung, T., Han, J., & Kim, Y. S. (2019) · Nano Convergence · doi:10.1186/s40580-019-0188-z · Cited by 110
A Review on Hierarchical Origami and Kirigami Structure for Engineering Applications
Park, J. J., Won, P., & Ko, S. H. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00027-2 · Cited by 96
Reactive 3D Printing of Shape-Programmable Liquid Crystal Elastomer Actuators
Barnes, M., Sajadi, S. M., Parekh, S., Rahman, M. M., Ajayan, P. M., & Verduzco, R. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07331 · Cited by 104
McIlroy, C., & Olmsted, P. D. (2024) · Figshare · Cited by 95
Liu, Z., He, C., Guo, C., Chen, F., Bhandari, B., & Zhang, M. (2021) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2021.106608 · Cited by 95
Optimization of 4D/3D printing via machine learning: A systematic review
Alli, Y. A., Anuar, H., Manshor, M. R., Okafor, C. E., Kamarulzaman, A. F., Akçakale, N., Nazeri, F. N. M., Bodaghi, M., Suhr, J., & Nasir, N. A. M. (2024) · Hybrid Advances · doi:10.1016/j.hybadv.2024.100242 · Cited by 113
Liquid Tubule Formation and Stabilization Using Cellulose Nanocrystal Surfactants
Liu, X., Shi, S., Li, Y., Forth, J., Wang, D., & Russell, T. P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201706839 · Cited by 95
Advances in 3D Bioprinting for Neural Tissue Engineering
Lee, S., Esworthy, T., Stake, S., Miao, S., Zuo, Y. Y., Harris, B. T., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201700213 · Cited by 92
Shape changing hydrogels and their applications as soft actuators
Peng, X., & Wang, H. (2018) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24724 · Cited by 97
3D and 4D printing for optics and metaphotonics
Jeong, H. Y., Lee, E., An, S., Lim, Y., & Jun, Y. C. (2020) · Nanophotonics · doi:10.1515/nanoph-2019-0483 · Cited by 102
3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure
Sather, N. A., Sai, H., Sasselli, I. R., Sato, K., Ji, W., Synatschke, C. V., Zambrotta, R. T., Edelbrock, J. F., Kohlmeyer, R. R., Hardin, J. O., et al. (2021) · Small · doi:10.1002/smll.202005743 · Cited by 97
Bioinspired Electrically Activated Soft Bistable Actuators
Shao, H., Wei, S., Jiang, X., Holmes, D. P., & Ghosh, T. K. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802999 · Cited by 95
Complex 3D bioprinting methods
Ji, S., & Güvendiren, M. (2021) · APL Bioengineering · doi:10.1063/5.0034901 · Cited by 100
Computational inverse design of surface-based inflatables
Panetta, J., Isvoranu, F., Chen, T., Siéfert, E., Roman, B., & Pauly, M. V. (2021) · ACM Transactions on Graphics · doi:10.1145/3450626.3459789 · Cited by 93
Current developments in multifunctional smart materials for 3D/4D bioprinting
Castro, N. J., Meinert, C., Levett, P. A., & Hutmacher, D. W. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.002 · Cited by 94
Large Shape Transforming 4D Auxetic Structures
Wagner, M., Chen, T., & Shea, K. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0027 · Cited by 92
Momeni, F., & Ni, J. (2020) · Engineering · doi:10.1016/j.eng.2020.01.015 · Cited by 102
Metadata
- Authors
- Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- University of Illinois Urbana-Champaign (US)
- Corresponding author
- Mahadevan, L.
- Lewis, Jennifer A.
- Venue
- Nature Materials
- Published
- 2016-01-25
- Volume
- 15
- Issue
- 4
- Pages
- 413-418
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2266720690
- Cited by
- 3,027
- References
- 36
- Citations by year
- 2026: 210 · 2025: 264 · 2024: 284 · 2023: 307 · 2022: 371 · 2021: 366 · 2020: 360 · 2019: 316 · 2018: 296 · 2017: 184 · 2016: 65
- FWCI
- 254.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- 4D printing, biomimetic materials, composite hydrogels, anisotropic swelling, inverse design, shape programming, turgor pressure
- MeSH terms
- Cell Wall, Cellulose, Models, Theoretical, Plants, Anisotropy, Biomimetic Materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.