The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Graphitic carbon nitride materials: variation of structure and morphology and their use as metal-free catalysts
Abstract
Graphitic carbon nitride, g-C3N4, can be made by polymerization of cyanamide, dicyandiamide or melamine. Depending on reaction conditions, different materials with different degrees of condensation, properties and reactivities are obtained. The firstly formed polymeric C3N4 structure, melon, with pendant amino groups, is a highly ordered polymer. Further reaction leads to more condensed and less defective C3N4 species, based on tri-s-triazine (C6N7) units as elementary building blocks. High resolution transmission electron microscopy proves the extended two-dimensional character of the condensation motif. Due to the polymerization-type synthesis from a liquid precursor, a variety of material nanostructures such as nanoparticles or mesoporous powders can be accessed. Those nanostructures also allow fine tuning of properties, the ability for intercalation, as well as the possibility to give surface-rich materials for heterogeneous reactions. Due to the special semiconductor properties of carbon nitrides, they show unexpected catalytic activity for a variety of reactions, such as for the activation of benzene, trimerization reactions, and also the activation of carbon dioxide. Model calculations are presented to explain this unusual case of heterogeneous, metal-free catalysis. Carbon nitride can also act as a heterogeneous reactant, and a new family of metal nitride nanostructures can be accessed from the corresponding oxides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
First principles methods using CASTEP
Clark, S. J., Segall, M. D., Pickard, C. J., Hasnip, P. J., Probert, M. I. J., Refson, K., & Payne, M. C. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.220.5.567.65075 · Cited by 14,633
Prediction of New Low Compressibility Solids
Liu, A. Y., & Cohen, M. L. (1989) · Science · doi:10.1126/science.245.4920.841 · Cited by 2,681
Synthesis of Highly Ordered Carbon Molecular Sieves via Template-Mediated Structural Transformation
Ryoo, R., Joo, S. H., & Jun, S. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp991673a · Cited by 2,450
Ryoo, R., Joo, S. H., Kruk, M., & Jaroniec, M. (2001) · Advanced Materials · doi:10.1002/1521-4095(200105)13:9<677::aid-adma677>3.0.co;2-c · Cited by 1,559
Calculation of bulk moduli of diamond and zinc-blende solids
Cohen, M. L. (1985) · Physical Review B · doi:10.1103/physrevb.32.7988 · Cited by 1,139
Jürgens, B., Irran, E., Senker, J., Kroll, P., Müller, H., & Schnick, W. (2003) · Journal of the American Chemical Society · doi:10.1021/ja0357689 · Cited by 1,139
Goettmann, F., Fischer, A., Antonietti, M., & Thomas, A. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600412 · Cited by 1,002
Self-citationLotsch, B. V., Döblinger, M., Sehnert, J., Seyfarth, L., Senker, J., Oeckler, O., & Schnick, W. (2007) · Chemistry – A European Journal · doi:10.1002/chem.200601759 · Cited by 960
Experimental Realization of the Covalent Solid Carbon Nitride
Niu, C., Lu, Y. Z., & Lieber, C. M. (1993) · Science · doi:10.1126/science.261.5119.334 · Cited by 896
Synthesis of g‐C3N4 Nanoparticles in Mesoporous Silica Host Matrices
Groenewolt, M., & Antonietti, M. (2005) · Advanced Materials · doi:10.1002/adma.200401756 · Cited by 882
Self-citation
Cited by
Items 201–292 of 292
Zhang, G., Huang, C., & Wang, X. (2015) · Small · doi:10.1002/smll.201402636 · Cited by 328
Yan, H., Chen, Y., & Xu, S. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.09.072 · Cited by 327
Katsumata, K.-I., Motoyoshi, R., Matsushita, N., & Okada, K. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.05.058 · Cited by 327
Liu, J., Jia, Q., Long, J., Wang, X., Gao, Z., & Gu, Q. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.09.073 · Cited by 324
Karim, A. V., Hassani, A., Eghbali, P., & Nidheesh, P. V. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100965 · Cited by 322
Teixeira, I. F., Barbosa, E. C. M., Tsang, S. C. E., & Camargo, P. H. C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00479j · Cited by 316
Liu, H., Li, H., Lu, J., Zeng, S., Wang, M., Luo, N., Xu, S., & Wang, F. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b00022 · Cited by 315
Oxidative degradation of tetracycline using persulfate activated by N and Cu codoped biochar
Zhong, Q., Lin, Q., Huang, R., Fu, H., Zhang, X., Luo, H., & Xiao, R. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122608 · Cited by 313
Jun, Y., Park, J., Lee, S. U., Thomas, A., Hong, W. H., & Stucky, G. D. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304034 · Cited by 313
Self-citationWang, J., Wu, H., Gao, D., Miao, S., Wang, G., & Bao, X. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.025 · Cited by 313
Huang, S., Xu, Y., Xie, M., Xu, H., He, M., Xia, J., Huang, L., & Li, H. (2015) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.03.035 · Cited by 313
Li, H.-J., Sun, B.-W., Sui, L., Qian, D.-J., & Chen, M. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05020g · Cited by 311
Wang, J., Yu, Y., Cui, J., Li, X., Zhang, Y., Wang, C., Yu, X., & Ye, J. (2022) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120814 · Cited by 311
Nanoporous Graphitic Carbon Nitride with Enhanced Photocatalytic Performance
Xu, J., Wang, Y., & Zhu, Y. (2013) · Langmuir · doi:10.1021/la402268u · Cited by 310
Wang, M.-Q., Yang, W.-H., Wang, H.-H., Chen, C., Zhou, Z.-Y., & Sun, S.-G. (2014) · ACS Catalysis · doi:10.1021/cs500673k · Cited by 310
Wang, X., Wang, A., & Ma, J. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.04.012 · Cited by 310
Yuan, J., Liu, X., Tang, Y., Zeng, Y., Wang, L., Zhang, S., Cai, T., Liu, Y., Luo, S., Pei, Y., et al. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.05.064 · Cited by 309
Photoelectrochemical Water‐Splitting Using CuO‐Based Electrodes for Hydrogen Production: A Review
Siavash Moakhar, R., Hosseini‐Hosseinabad, S. M., Masudy‐Panah, S., Seza, A., Jalali, M., Fallah‐Arani, H., Dabir, F., Gholipour, S., Abdi, Y., Bagheri‐Hariri, M., et al. (2021) · Advanced Materials · doi:10.1002/adma.202007285 · Cited by 308
Li, Y., Xu, H., Ouyang, S., Lu, D., Wang, X., Wang, D., & Ye, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta05128b · Cited by 308
Kondo, T., Casolo, S., Suzuki, T., Shikano, T., Sakurai, M., Harada, Y., Saito, M., Oshima, M., Trioni, M. I., Tantardini, G. F., et al. (2012) · Physical Review B · doi:10.1103/physrevb.86.035436 · Cited by 308
Noble‐Metal‐Free NiS/C3N4 for Efficient Photocatalytic Hydrogen Evolution from Water
Hong, J., Wang, Y., Wang, Y., Zhang, W., & Xu, R. (2013) · ChemSusChem · doi:10.1002/cssc.201300647 · Cited by 306
Advancing the n → π* electron transition of carbon nitride nanotubes for H2photosynthesis
Zhang, G., Savateev, A., Zhao, Y., Li, L., & Antonietti, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03777e · Cited by 305
Self-citationTemplate-Induced High-Crystalline g-C3N4 Nanosheets for Enhanced Photocatalytic H2 Evolution
Xing, W., Tu, W., Han, Z., Hu, Y., Meng, Q., & Chen, G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01328 · Cited by 305
Lau, V. W., Yu, V. W., Ehrat, F., Botari, T., Moudrakovski, I., Simon, T., Duppel, V., Medina, E., Stolarczyk, J. K., Feldmann, J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602251 · Cited by 304
Su, P., Xiao, H., Zhao, J., Yao, Y., Shao, Z., Li, C., & Yang, Q. (2013) · Chemical Science · doi:10.1039/c3sc51052b · Cited by 304
Jiao, Y., Huang, Q., Wang, J., He, Z., & Li, Z. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.01.073 · Cited by 303
Corp, K. L., & Schlenker, C. W. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02869 · Cited by 302
Bagheri, S., TermehYousefi, A., & Do, T.-O. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy00468k · Cited by 302
Carbon nitride based materials: more than just a support for single-atom catalysis
Rocha, G. F. S. R., da Silva, M. A. R., Rogolino, A., Diab, G. A. A., Noleto, L. F. G., Antonietti, M., & Teixeira, I. F. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00806h · Cited by 302
Self-citationHo, W., Zhang, Z., Lin, W., Huang, S., Zhang, X., Wang, X., & Huang, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509213x · Cited by 300
Li, F.-T., Zhao, Y., Wang, Q., Wang, X.-J., Hao, Y.-J., Liu, R.-H., & Zhao, D. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.035 · Cited by 298
Su, Q., Sun, J., Wang, J., Yang, Z., Cheng, W., & Zhang, S. (2014) · Catalysis Science & Technology · doi:10.1039/c3cy00921a · Cited by 298
Wang, S., Li, C., Wang, T., Zhang, P., Li, A., & Gong, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14576j · Cited by 298
Patnaik, S., Martha, S., & Parida, K. M. (2016) · RSC Advances · doi:10.1039/c5ra26702a · Cited by 297
Ma, L., Fan, H., Fu, K., Lei, S., Hu, Q., Huang, H., & He, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01312 · Cited by 297
Paul, D. R., Sharma, R., Nehra, S. P., & Sharma, A. (2019) · RSC Advances · doi:10.1039/c9ra02201e · Cited by 296
Phenyl‐Modified Carbon Nitride Quantum Dots with Distinct Photoluminescence Behavior
Cui, Q., Xu, J., Wang, X., Li, L., Antonietti, M., & Shalom, M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511217 · Cited by 295
Self-citationRaziq, F., Qu, Y., Humayun, M., Zada, A., Yu, H., & Jing, L. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.08.057 · Cited by 291
Chen, M., Guo, C., Hou, S., Lv, J., Zhang, Y., Zhang, H., & Xu, J. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.118614 · Cited by 291
Unraveling fundamental active units in carbon nitride for photocatalytic oxidation reactions
Huang, C., Wen, Y., Ma, J., Dong, D., Shen, Y., Liu, S., Ma, H., & Zhang, Y. (2021) · Nature Communications · doi:10.1038/s41467-020-20521-5 · Cited by 291
Lee, E. Z., Jun, Y., Hong, W. H., Thomas, A., & Jin, M. M. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201004975 · Cited by 290
Self-citationCovalent Organic Frameworks for Photocatalysis
Mishra, B., Alam, A., Chakraborty, A., Kumbhakar, B., Ghosh, S., Pachfule, P., & Thomas, A. (2025) · Advanced Materials · doi:10.1002/adma.202413118 · Cited by 290
Self-citationUltra high stiffness and thermal conductivity of graphene like C3N
Mortazavi, B. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.029 · Cited by 289
Luo, J., Liu, Y., Fan, C., Tang, L., Yang, S., Liu, M., Wang, M., Feng, C., Ouyang, X., Wang, L., et al. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c03103 · Cited by 288
He, F., Chen, G., Yu, Y., Hao, S., Zhou, Y., & Zheng, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500198y · Cited by 287
Liu, J., Xu, H., Xu, Y., Song, Y., Lian, J., Zhao, Y., Wang, L., Huang, L., Ji, H., & Li, H. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.01.071 · Cited by 287
Carbon Nitride Materials for Water Splitting Photoelectrochemical Cells
Volokh, M., Peng, G., Barrio, J., & Shalom, M. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201806514 · Cited by 287
Dong, F., Sun, Y., Wu, L., Fu, M., & Wu, Z. (2012) · Catalysis Science & Technology · doi:10.1039/c2cy20049j · Cited by 286
A review on progress made in direct air capture of CO 2
Sodiq, A., Abdullatif, Y., Aissa, B., Ostovar, A., Nassar, N., El-Naas, M., & Amhamed, A. (2023) · Environmental Technology & Innovation · doi:10.1016/j.eti.2022.102991 · Cited by 285
Nitrogen-Rich Carbon Nitride Hollow Vessels: Synthesis, Characterization, and Their Properties
Li, Y., Zhang, J., Wang, Q., Jin, Y., Huang, D., Cui, Q., & Zou, G. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp103729c · Cited by 281
Li, K., Su, F.-Y., & Zhang, W.-D. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.03.025 · Cited by 281
Maeda, K. (2019) · Advanced Materials · doi:10.1002/adma.201808205 · Cited by 280
Mohamed, M. A., M. Zain, M. F., Jeffery Minggu, L., Kassim, M. B., Saidina Amin, N. A., W. Salleh, W. N., Salehmin, M. N. I., Md Nasir, M. F., & Mohd Hir, Z. A. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.05.037 · Cited by 278
Han, Q., Hu, C., Zhao, F., Zhang, Z., Chen, N., & Qu, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06093h · Cited by 276
Xu, L., Huang, W.-Q., Wang, L.-L., Tian, Z.-A., Hu, W., Ma, Y., Wang, X., Pan, A., & Huang, G.-F. (2015) · Chemistry of Materials · doi:10.1021/cm504265w · Cited by 275
Molecular Design of Polymer Heterojunctions for Efficient Solar–Hydrogen Conversion
Chen, J., Dong, C., Zhao, D., Huang, Y., Wang, X., Samad, L., Dang, L., Shearer, M., Shen, S., & Guo, L. (2017) · Advanced Materials · doi:10.1002/adma.201606198 · Cited by 273
Mo, Z., She, X., Li, Y., Liu, L., Huang, L., Chen, Z., Zhang, Q., Xu, H., & Li, H. (2015) · RSC Advances · doi:10.1039/c5ra19586a · Cited by 272
Three-dimensional graphene-based composites for energy applications
Mao, S., Lu, G., & Chen, J. (2015) · Nanoscale · doi:10.1039/c4nr06609j · Cited by 271
Facile synthesis of oxygen doped carbon nitride hollow microsphere for photocatalysis
Wang, Y., Wang, H., Chen, F., Cao, F., Zhao, X., Meng, S., & Cui, Y. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.01.041 · Cited by 271
Liu, X., & Antonietti, M. (2013) · Advanced Materials · doi:10.1002/adma.201302034 · Cited by 269
Self-citationTubular graphitic-C3N4: a prospective material for energy storage and green photocatalysis
Tahir, M., Cao, C., Butt, F. K., Idrees, F., Mahmood, N., Ali, Z., Aslam, I., Tanveer, M., Rizwan, M., & Mahmood, T. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13291a · Cited by 269
Du, X., Zou, G., Wang, Z., & Wang, X. (2015) · Nanoscale · doi:10.1039/c5nr00665a · Cited by 265
Band gap of C3N4 in the GW approximation
Xu, Y., & Gao, S.-P. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.04.138 · Cited by 265
Heterostructures Based on 2D Materials: A Versatile Platform for Efficient Catalysis
Shifa, T. A., Wang, F., Liu, Y., & He, J. (2019) · Advanced Materials · doi:10.1002/adma.201804828 · Cited by 264
Soft and hard templating of graphitic carbon nitride
Yang, Z., Zhang, Y., & Schnepp, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02156a · Cited by 264
Paraknowitsch, J. P., Thomas, A., & Antonietti, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00869a · Cited by 263
Self-citationCui, Y., Zhang, G., Lin, Z., & Wang, X. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.08.018 · Cited by 262
Kim, I. Y., Kim, S., Jin, X., Premkumar, S., Chandra, G., Lee, N., Mane, G. P., Hwang, S., Umapathy, S., & Vinu, A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201811061 · Cited by 262
Kailasam, K., Epping, J. D., Thomas, A., Losse, S., & Junge, H. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02165f · Cited by 261
Self-citationCatalytic oxidation of polystyrene to aromatic oxygenates over a graphitic carbon nitride catalyst
Cao, R., Zhang, M.-Q., Hu, C., Xiao, D., Wang, M., & Ma, D. (2022) · Nature Communications · doi:10.1038/s41467-022-32510-x · Cited by 261
Wang, X., Qiu, S., Feng, J., Tong, Y., Zhou, F., Li, Q., Song, L., Chen, S., Wu, K., Su, P., et al. (2020) · Advanced Materials · doi:10.1002/adma.202004382 · Cited by 260
Graphitic carbon nitride-based materials for photocatalytic antibacterial application
Kong, X., Liu, X., Zheng, Y., Chu, P. K., Zhang, Y., & Wu, S. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100610 · Cited by 259
Kuriki, R., Yamamoto, M., Higuchi, K., Yamamoto, Y., Akatsuka, M., Lu, D., Yagi, S., Yoshida, T., Ishitani, O., & Maeda, K. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701627 · Cited by 258
Chen, Z., Pronkin, S., Fellinger, T.-P., Kailasam, K., Vilé, G., Albani, D., Krumeich, F., Leary, R., Barnard, J., Thomas, J. M., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b04210 · Cited by 257
Self-citationWang, Y., Wang, X., & Antonietti, M. (2012) · Angewandte Chemie · doi:10.1002/ange.201101182 · Cited by 257
Self-citationChen, X., Liu, Q., Wu, Q., Du, P., Zhu, J., Dai, S., & Yang, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505321 · Cited by 256
Soft Photocatalysis: Organic Polymers for Solar Fuel Production
Vyas, V. S., Lau, V. W.-H., & Lotsch, B. V. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01894 · Cited by 256
Cobalt-doped graphitic carbon nitride photocatalysts with high activity for hydrogen evolution
Chen, P.-W., Li, K., Yu, Y.-X., & Zhang, W.-D. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.09.086 · Cited by 256
Xu, J., Wu, H.-T., Wang, X., Xue, B., Li, Y.-X., & Cao, Y. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp44402c · Cited by 256
Zheng, D., Pang, C., Liu, Y., & Wang, X. (2015) · Chemical Communications · doi:10.1039/c5cc03143e · Cited by 255
Sun, L., Qi, Y., Jia, C.-J., Jin, Z., & Fan, W. (2014) · Nanoscale · doi:10.1039/c3nr06104c · Cited by 254
Wang, K., Fu, J., & Zheng, Y. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.05.002 · Cited by 253
Xu, Y., Xu, H., Wang, L., Yan, J., Li, H., Song, Y., Huang, L., & Cai, G. (2013) · Dalton Transactions · doi:10.1039/c3dt32871f · Cited by 252
Sun, L., Zhao, X., Jia, C.-J., Zhou, Y., Cheng, X., Li, P., Liu, L., & Fan, W. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34965e · Cited by 252
Xu, J., Brenner, T. J. K., Chabanne, L., Neher, D., Antonietti, M., & Shalom, M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508329c · Cited by 252
Self-citationCui, Y., Huang, J., Fu, X., & Wang, X. (2012) · Catalysis Science & Technology · doi:10.1039/c2cy20036h · Cited by 252
Emerging new generation electrocatalysts for the oxygen reduction reaction
Raj, C. R., Samanta, A., Noh, S. H., Mondal, S., Okajima, T., & Ohsaka, T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03300h · Cited by 201
Zhang, K., Yue, Q., Chen, G., Zhai, Y., Wang, L., Wang, H., Zhao, J., Liu, J., Jia, J., & Li, H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp108305v · Cited by 147
Sadhukhan, M., & Barman, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01523h · Cited by 144
Jhong, H. M., Tornow, C. E., Smid, B., Gewirth, A. A., Lyth, S. M., & Kenis, P. J. A. (2017) · ChemSusChem · doi:10.1002/cssc.201600843 · Cited by 125
N-doped graphene catalysts with high nitrogen concentration for the oxygen reduction reaction
Lemes, G., Sebastián, D., Pastor, E., & Lázaro, M. J. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227036 · Cited by 112
Tripathi, A., & Narayanan, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.01.265 · Cited by 54
Metadata
- Authors
- Thomas, A., Fischer, A., Goettmann, F., Antonietti, M., Müller, J.-O., Schlögl, R., & Carlsson, J. M.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2008
- Volume
- 18
- Issue
- 41
- Pages
- 4893
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2167821865
- Cited by
- 3,419
- References
- 42
- FWCI
- 19.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.