The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Sustainable porous carbons with a superior performance for CO2 capture
Open accessAbstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 901–1,000 of 1,000
Facile synthesis of amine-functionalized three-dimensional graphene composites for CO2 capture
Sun, H., Zhang, Q., Hagio, T., Ichino, R., Kong, L., & Li, L. (2022) · Surfaces and Interfaces · doi:10.1016/j.surfin.2022.102256 · Cited by 6
Biochar in Carbon Sequestration
Shirzad, M., Karimi, M., Rodrigues, A. E., & Silva, J. A. C. (2023) · Materials horizons · doi:10.1007/978-981-99-5239-7_4 · Cited by 9
Yang, W., Feng, Y., & Chu, W. (2014) · International Journal of Chemical Engineering · doi:10.1155/2014/916913 · Cited by 6
Xie, L., Kang, L., Li, Y., Cui, M., Chang, B., Jiang, H., Gao, L., Wang, X., & Yun, S. (2017) · NANO · doi:10.1142/s1793292017500400 · Cited by 6
Potential of Jerusalem Artichoke Stem for Cellulose Production
Прусов, А. Н., Prusova, S. M., Zakharov, A. G., Bazanov, A. V., & Ivanov, V. K. (2019) · Eurasian Chemico-Technological Journal · doi:10.18321/ectj828 · Cited by 6
NurAisyah, S., Khairunnisa, M. P., NorRuwaida, J., Ali, A. H. M., Dewika, M., & Rashid, M. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/476/1/012124 · Cited by 6
Quan, C., Jia, X., Zhang, K., Zhang, Y., Naqvi, S. R., Amin, N. A. S., & Gao, N. (2021) · International Journal of Energy Research · doi:10.1002/er.7241 · Cited by 6
“7 nm was the most important factor for CO2 physical adsorption.(55) Wei et al(56) also reported that the micropore of size 0.”
BackgroundZhang, X., & Lu, A. (2019) · Wiley eBooks · doi:10.1002/9781119091219.ch3 · Cited by 6
Memetova, A. E., Tyagi, I., Меметов, Н. Р., Zelenin, A. D., Dyachkova, T. P., Irina, G. A., Rajendran, S., & Gaur, R. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.117550 · Cited by 5
Enhanced CO2 adsorption in synthesized cube-shaped zeolitic 4A framework
JABLI, N., Ouzrour, Z., Mellalou, A., Jacquemin, J., Tamraoui, Y., & Ghamouss, F. (2025) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2025.108034 · Cited by 5
Zhang, Y., Sun, F., Yang, C.-W., Wei, G., Wang, J., Qu, Z., Zuo, J., Gao, J., & Liu, S. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c17958 · Cited by 7
Khan, T. M. A., Magray, T. F., & Sarawade, P. B. (2026) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2026.132368 · Cited by 7
Guo, S., Gan, J., Li, Y., Sun, B., Qu, H., Li, X., & Zhao, D. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.11.079 · Cited by 5
Mane, S. T., Kanase, D. G., & Mohite, S. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52729 · Cited by 5
CO2 Adsorption Study of Potassium-Based Activation of Carbon Spheres
Pełech, I., Staciwa, P., Sibera, D., Pełech, R., Sobczuk, K. S., Kayalar, G. Y., Narkiewicz, U., & Cormia, R. D. (2022) · Molecules · doi:10.3390/molecules27175379 · Cited by 6
“Due to the fact that, for effective CO2 adsorption under the atmospheric conditions of a pore content below 1 nm is crucial [36,43,44], the microporosity of the obtained materials was investigated in more depth.”
BackgroundSteam Activation of Acid-Chars for Enhanced Textural Properties and Pharmaceuticals Removal
Hubetska, T. S., Mestre, A. S., Kobylinska, N., & Carvalho, A. P. (2022) · Nanomaterials · doi:10.3390/nano12193480 · Cited by 5
Singh, R., Samuel, M. S., Ravikumar, M., Ethiraj, S., Savunthari, K. V., Kumar, M., Arulvel, R., & Sagadevan, S. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140311 · Cited by 5
Liu, H., Zhang, H., Shen, P., Zhao, G., & Zhang, S. (2016) · RSC Advances · doi:10.1039/c5ra27418d · Cited by 5
Porous Hydrothermal Carbon Materials, Nanoparticles, Hybrids and Composites
Brun, N., Yu, S., & White, R. J. (2015) · Royal Society of Chemistry eBooks · doi:10.1039/9781782622277-00156 · Cited by 6
Nande, S. S., & Garnaik, B. (2017) · New Journal of Chemistry · doi:10.1039/c7nj02141k · Cited by 5
Zhang, L., Liu, J., Yang, X., Ma, J., & Tang, T. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.04.030 · Cited by 5
Dry and Wet CO2 Capture from Milk‐Derived Microporous Carbons with Tuned Hydrophobicity
Pokrzywinski, J., Aulakh, D., Verdegaal, W. M., Pham, V. H., Bilan, H. K., Marble, S., Mitlin, D., & Wriedt, M. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000001 · Cited by 5
Tecnologias Sustentáveis de Captura de CO2: Uma Breve Revisão
Ribeiro, M. G., Hisse, D., Prado, M. L., dos Santos, T. C., & Ronconi, C. M. M. (2022) · Revista Virtual de Química · doi:10.21577/1984-6835.20220086 · Cited by 5
Morphology engineering of nanostructured TiO 2 particles
Zha, R., Nadimicherla, R., & Guo, X. (2014) · RSC Advances · doi:10.1039/c4ra13912g · Cited by 5
Adsorbents with sustainable CO2 capture capacity prepared from carboxymethylcellulose
Wu, Q., Li, W., Dai, L., Wu, Y., & Liu, S. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.164 · Cited by 5
Mechanism sorption of carbon dioxide onto dam silt
Ouadjenia, F., Marouf, R., & Schott, J. (2017) · Cogent Chemistry · doi:10.1080/23312009.2017.1300974 · Cited by 5
“The characteristic energy E is equal to 20.9 kJ/mol, typical for a physisorption process and similar to other materials such as activated carbons (Sevilla, Falco, Titirici, & Fuertesa, 2012; Sevilla & Fuertes, 2011) and zeolithe (Ghezini, Sassi, & Bengueddach, 2008).”
BackgroundInfluentialEfficient CO2 adsorption by deoiled flaxseed hydrochar
Arefizadeh, M., Behvandi, D., Shahhosseini, S., & Ghaemi, A. (2024) · Scientific Reports · doi:10.1038/s41598-024-78177-w · Cited by 4
Wu, S., Zhu, Y., Yi, F., Cui, Z., & Huang, A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114358 · Cited by 4
Jeon, S., Chae, H. S., Yoon, H. J., & Lee, K. B. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159235 · Cited by 5
Nanomaterials from Biomass: An Update
Sangeetha, J., Shettar, A. K., & Thangadurai, D. (2021) · Springer eBooks · doi:10.1007/978-3-030-36268-3_23 · Cited by 4
Bevan, E. (2022) · Springer eBooks · doi:10.1007/978-3-031-06562-0_27 · Cited by 5
An Exploratory Study of Hydrochar as a Matrix for Biotechnological Applications
Gallifuoco, A., Papa, A. A., Passucci, M., Spera, A., Taglieri, L., & Carlo, A. D. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c00765 · Cited by 4
Saeed, A., Munir, S., Gull, N., & Khan, S. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13500-2.00015-8 · Cited by 4
Carbon foams for CO2 adsorption: Synthesis, characterization and application
Maquíñez-Buitrago, D. F., Rincón, J. M. R., Giraldo, L., & Moreno‐Piraján, J. C. (2024) · Hybrid Advances · doi:10.1016/j.hybadv.2024.100219 · Cited by 4
Lotfinezhad, M., & Tahmasebpoor, M. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.116218 · Cited by 4
Львович, И. Р., Kuzmin, S. N., Konyakhin, V. V., Milovanov, O. Y., Mikhalev, A. V., Muratova, N. S., Nebyvaev, A. V., & Kokh-Tatarenko, V. S. (2022) · Thermal Engineering · doi:10.1134/s0040601522120035 · Cited by 5
Molecular Simulation Techniques as Applied to Silica and Carbon-Based Adsorbents for Carbon Capture
Wadi, B., Golmakani, A., Borhani, T. N. G., Manovic, V. M., & Nabavi, S. A. (2023) · Energies · doi:10.3390/en16135013 · Cited by 5
Kinetics of CO2 Adsorption on Microwave Palm Shell Activated Carbon
Nasri, N. S., Hamza, U. D., Amin, N. A. S., Mohammed, J., Ahmed, M. M., & Zain, H. M. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1043.224 · Cited by 4
“Adsorption with activated carbon had shown promising results in that regard [2].”
BackgroundDeep Eutectic Solvents Playing Multiple Roles in the Synthesis of Porous Carbon Materials
Carriazo, D., Serrano, M. C., Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2015) · Springer eBooks · doi:10.1007/978-3-662-44903-5_2 · Cited by 4
Enhancement of Lithium Storage Performance of Carbon Microflowers by Achieving a High Surface Area
Li, Y., Xiao, Y. Z., Wang, X., & Cao, M. (2014) · Chemistry - An Asian Journal · doi:10.1002/asia.201400087 · Cited by 4
Bagasse Activated Carbon Reactivation Promotesand Adsorption of CO$lt;inf$gt;2$lt;/inf$gt;
Jian-Wen, W., Zhi-Feng, L., Ze-Yu, H., He, K., Lin-lin, G., & Lei, L. (2016) · Journal of Inorganic Materials · doi:10.15541/jim20160293 · Cited by 4
Waste-Derived Biochar for CO2 Sequestration
Liu, S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811729-3.00016-9 · Cited by 5
Feizi-Afshar, B., Vafajoo, L., & Farzi, A. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2025.102921 · Cited by 4
Kantarli, I. C. (2023) · Black Sea Journal of Engineering and Science · doi:10.34248/bsengineering.1347169 · Cited by 3
Machine learning-driven design of high-performance activated carbons for enhanced CO2 capture
Maleki, A., Mehdizad, A., Hassani, E., Naveshki, M., Zalakinezhad, A., Rashidi, A., Farhadian, A., Somarin, D. H., & Aghazadeh, F. (2026) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2026.103336 · Cited by 3
Park, J., Cho, S.-H., Lee, Y.-J., Park, S., & Kwon, E. E. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.121831 · Cited by 3
Aliyeva, N., Baskan‐Bayrak, H., Aleinawi, M. H., Erdem, E., Paterakis, G., Galiotis, C., Hajri, E. A., Samad, Y. A., & Okan, B. S. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121648 · Cited by 3
Deka, J. R., Saikia, D., Wu, S., Tseng, Y.-C., Hung, W., & Kao, H. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.122694 · Cited by 3
Prasad, D., Srinivasappa, P. M., Manjunath, H., Samal, A. K., Palantavida, S., Biradar, A. V., & Jadhav, A. H. (2026) · Catalysis Reviews · doi:10.1080/01614940.2026.2666905 · Cited by 2
Engineering sub-nanometer pore networks in biomass-derived carbons for CF4 adsorption
Wang, Y., Hao, Z., Zhao, M., Jiang, Y., Xiao, Q., Zhao, L., Demir, M., Şimşek, U. B., Wang, L., & Hu, X. (2026) · Chemical Engineering Science · doi:10.1016/j.ces.2026.124196 · Cited by 3
Progress in Post-Combustion Technology for Carbon Dioxide Capture
Wang, X. (2023) · Highlights in Science Engineering and Technology · doi:10.54097/hset.v73i.14050 · Cited by 3
“Further characterization tests revealed that the physical properties of the formed activated carbon were independent of the precursor choice, indicating high adsorption performance in CO 2 separation [19].”
BackgroundChai, X., Huang, W., Li, X., Wang, X., Zhou, Y., Zhu, B., Li, Y., & Tian, X. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00195-1 · Cited by 3
Yang, Z., Zheng, X., Ji, B., Xu, Z., Bao, S., Sun, W., Mei, J., Rong, J., & Li, Z. (2025) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-025-2029-0 · Cited by 3
“Sevilla and Fuertes (2011) prepared sawdust mesoporous carbon with a micropore fraction ( 1 nm) of 88 % using hydrothermal and chemical activation methods.”
Jin, Y., Hawkins, S. C., Huynh, C., & Su, S. (2015) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.1921 · Cited by 3
Kim, M. H., Choi, S. O., & Choo, S. T. (2019) · Carbon letters · doi:10.1007/s42823-019-00055-7 · Cited by 3
Nano-casted N-Doped Carbon Created From a Task-Specific Protic Salt and Controlled Porous Glass
Singh, V. J., Gantman, M. G., Selvam, T., Münzer, M., Enke, D., & Schwieger, W. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00767 · Cited by 3
“For comparison purposes, ZIF-11 prepared based on the synthesis method by He et al. (2013) was carbonized at 1000◦C (based on (Hao et al., 2015a) without activation using KOH) and tested under similar conditions.”
ResultAbdulsalam, J., Setsepu, R. L., Lawal, A. I., Onifade, M., & Bada, S. O. (2023) · ACS Omega · doi:10.1021/acsomega.2c06272 · Cited by 4
The role of Ir4 cluster in enhancing the adsorption of CO2 on selected zeolites – GCMC simulations
Smykowski, D., Nowak, K., Łużny, R., Szczygieł, J., & Szyja, B. M. (2015) · Journal of Molecular Graphics and Modelling · doi:10.1016/j.jmgm.2015.02.001 · Cited by 3
CO2 adsorption by carbonaceous materials and nanomaterials
Kanjilal, B., Masoumi, A., Nabavinia, M., Krishnadoss, V., Savelski, M. J., & Noshadi, I. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819657-1.00008-6 · Cited by 3
Heo, S., Kim, W., Lee, T.-J., Adelodun, A. A., & Jo, Y. M. (2021) · Asian Journal of Atmospheric Environment · doi:10.5572/ajae.2020.132 · Cited by 3
“Sevilla and Fuertes (2011) and Sevilla et al. (2011) reported that ACs predominated with 1-2 nm width pores often exhibit excellent CO 2 adsorption selectivity, unlike those with narrower micropores or with a mesoporous pore network.”
BackgroundRecyclable Porous Adsorbents as Environmentally Approach for Greenhouse Gas Capture
Attia, N. F., Elashery, S. E. A., Galhoum, A. A., Oh, H., & Sayed, I. E. T. E. (2022) · Wiley eBooks · doi:10.1002/9781119827665.ch12 · Cited by 3
Guo, D., Feng, D., Zhang, Y., Zhang, Y., Zhao, Y., Gao, J., & Sun, S. (2026) · The Innovation Energy · doi:10.59717/j.xinn-energy.2026.100131 · Cited by 2
Green and Sustainable Nanomaterials
Sharma, A., Marwaha, L., & Thoker, Z. A. (2026) · IGI Global eBooks · doi:10.4018/979-8-3373-5966-3.ch006 · Cited by 2
Nitrogen-doped carbon materials from fruit peels for sustainable and techno-economic CO₂ capture
Khan, M. N., Zhang, J., Peng, D., Wang, X., Zhang, D., Zou, J., & Hu, Z. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.121954 · Cited by 2
Khan, M. F. H., Ahmed, I., Shovon, S. M., Akash, F. A., Leon, T. I., Rahman, A., & Chanda, R. K. (2026) · International Journal of Green Energy · doi:10.1080/15435075.2026.2637734 · Cited by 3
Jeon, W. J., & Lee, M. G. (2026) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2026.103405 · Cited by 6
Thermally stable oxygen-rich nanosized plant particles for supercapacitor applications
Govindhan, M. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102055 · Cited by 2
Energy-efficient and eco-friendly lignin catalysts for clean fuel production
Iqbal, S., Murtaza, H., Nazir, S., Hussaın, F., & Hassan, S. U. (2026) · Catalysis Reviews · doi:10.1080/01614940.2026.2677057 · Cited by 2
Polymeric Gels for Carbon Dioxide Capture
Ji, Z., Wang, C., & Guo, Y. (2026) · ACS Nano · doi:10.1021/acsnano.6c04972 · Cited by 3
Ultramicroporous N-doped carbons prepared by KHC2O4 activation for CO2 adsorption
Yin, Y., Wang, Y., Li, Z. S., Liu, Y. C., Zhao, L., Demir, M., Zaid, A., Wang, L., & Hu, X. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.124231 · Cited by 4
Momeni, M., Haddadi, S. A., Soltanian, S., Zamani, S. M., Mekonnen, T. H., Chen, A., & Dutta, A. (2026) · Journal of Environmental Management · doi:10.1016/j.jenvman.2026.131011 · Cited by 2
Measuring electrical resistances of ACF sensors by CO2 adsorption in a small chamber
Kim, D. W., Kwac, L., Kim, H., & Ryu, S. (2022) · Carbon letters · doi:10.1007/s42823-021-00306-6 · Cited by 2
“Ismail [18] and Sevilla [37, 38] reported that activated carbon with numerous micropores of 0.”
BackgroundInfluentialYang, G., Zhu, B., Ying, Y., & Li, H. (2023) · Carbon · doi:10.1016/j.carbon.2023.118464 · Cited by 2
Ganorkar, A. P., & Langde, A. (2023) · AIP conference proceedings · doi:10.1063/5.0167636 · Cited by 2
Parameswari, E., Sebastian, S. P., Monica, K. B., Davamani, V., Kalaiselvi, P., & Ilakiya, T. (2023) · Bioremediation Journal · doi:10.1080/10889868.2023.2284788 · Cited by 2
“Materials with a HHV of 20 MJ/kg are typically considered as fuel supplements (Sevilla and Fuertes 2011; Shakiba et al. 2023).”
Pulp carbon fixation via pyrolysis using ammonium dihydrogen phosphate as an additive
Muranaka, Y., Maki, T., Nakagawa, H., Mukaeda, T., Tsuchida, A., & Mae, K. (2024) · Bioresource Technology Reports · doi:10.1016/j.biteb.2024.101873 · Cited by 2
Huang, Q., Karthik, H., Patra, B. R., Pattnaik, F., & Dalai, A. K. (2024) · Canadian Journal of Chemistry · doi:10.1139/cjc-2024-0150 · Cited by 3
Shankaraiah, S., Vittal, S., Bindu, G. H., Shanti, M., Rakesh, C., & Anitha, K. (2025) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.70088 · Cited by 2
Saha, S., & Reza, M. T. (2025) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00356 · Cited by 2
Adsorption and Diffusion of Gases in Nano-Porous Materials
Suraweera, N. S. (2013) · Cited by 2
MICROWAVE ASSISTED K2CO3 PALM SHELL ACTIVATED CARBON AS SORBENT FOR CO2 ADSORPTION APPLICATION
Hamza, U. D., Nasri, N. S., Amin, N. A. S., Mohammed, J., & Zain, H. M. (2016) · Jurnal Teknologi · doi:10.11113/jt.v78.9576 · Cited by 2
Khalafallah, D., Zhi, M., & Hong, Z. (2021) · Topics in mining, metallurgy and materials engineering · doi:10.1007/978-3-030-68031-2_17 · Cited by 2
Industrial carbon dioxide capture and utilization
Hira, U., Kamal, Ä., & Tahir, J. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99429-3.00023-0 · Cited by 3
Adjustable gas adsorption and desorption via a self-shrinking nanoscroll
Wan, J., Cai, K. P., Kang, Y., Luo, Y., & Qin, Q. (2023) · Applied Physics Letters · doi:10.1063/5.0175953 · Cited by 2
Arundina, R. Y., Togatorop, E. R. S., Sutan, S. M., & Marlina, R. (2024) · AIP conference proceedings · doi:10.1063/5.0184541 · Cited by 1
MAMMADYAROVA, K., & Yılmaz, M. S. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-35101-z · Cited by 1
“The abundant ultra-micropores pre-sent in the porous carbons offer significant advantages for the adsorption of CO 2 by effectively filling these micropores (Sevilla and Fuertes 2011).”
Interpretable machine learning unravels synergistic effects in photothermal CO2 methanation
Huang, Z., Deng, R., Zhang, R., Li, R., Liu, S., Wu, J., Zairov, R., Sinyashin, O. G., & Zhou, Y. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.111909 · Cited by 1
Nogueira, G. A., Laranja, M. J., Mondek, S. A., Vieira, L. H. S., Boscolo, M., Ferreira, O. P., Moreira, A. B., & Bisinoti, M. C. (2025) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00321 · Cited by 1
Bicil, Z. (2025) · Sakarya University Journal of Science · doi:10.16984/saufenbilder.1738801 · Cited by 1
Zada, I., Shen, H., Li, Y., Luo, J., Zhu, S., Wei, W., Li, Y., Li, Y., & Zhang, D. (2025) · The Innovation Materials · doi:10.59717/j.xinn-mater.2025.100165 · Cited by 1
Kurtuluş, K. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.129586 · Cited by 1
Asawarungruengchai, P., Sakulaue, P., Deshsorn, K., Iamprasertkun, P., Kaothanthong, N., & Nueangnoraj, K. (2026) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2026.103316 · Cited by 3
Generation of Cu(I) Sites in Y Zeolite via In Situ Ethylene Reduction for Ethylene/Ethane Separation
He, W.-J., Shen, J., Zhang, K.-B., Qi, S., Zhao, J., Li, Y., & Sun, L. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c04815 · Cited by 1
Qin, Y., Yang, X., Ma, L., 山少男, Li, G., & Zhang, G. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.122196 · Cited by 1
Joia, R., Mukhlis, N., Rashid, A., Atamanov, M. K., & Yosufi, A. (2026) · Journal of Natural Science Review · doi:10.62810/jnsr.v4i1.335 · Cited by 1
“This behavior agrees well with previous reports demonstrating that microporosity, particularly ultramicropores, dominates CO₂ physisorption at near-ambient conditions (Sai Bhargava Reddy et al., 2021), (Sevilla & Fuertes, 2011).”
Hammoumi, A. E., BOUBNANE, Y., Bou‐ouzoukni, Y., Francesconi, M. G., Taylor, M. J., Benoit, D. M., Izzaouihda, S., Makarim, H. A. E., & Sebbahi, S. (2026) · Applied Surface Science · doi:10.1016/j.apsusc.2026.166875 · Cited by 1
A review of carbon-based anode materials for LIBs: Properties, modifications, and perspectives
Gao, N., Nan, W. A. N. G., Zhang, K., Meng, W., Bai, Y., Guo, M., Geng, L., & Ye, J. (2026) · Carbon · doi:10.1016/j.carbon.2026.121695 · Cited by 1
Bamboo-derived hierarchical porous carbon with oxygen-rich skeleton toward enhanced hydrogen storage
Li, Y., Shao, L., Wang, W., Liao, Y., Zhang, J., Ma, X. H., Zhao, W., Luo, S., Li, L., & Qing, Y. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.122856 · Cited by 1
Zhang, T., Zheng, L., Bella, A. D., Yang, X., Mol, Z., Demeestere, K., & Hulle, S. W. H. V. (2026) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2026.142778 · Cited by 1
Yin, Y., Xu, Y., Ye, Z., Liu, Y., Hu, X., Jiang, Y., Zhao, L., Demir, M., Mesfer, M. K. A., Xiao, Q., et al. (2026) · Fuel · doi:10.1016/j.fuel.2026.140742 · Cited by 1
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.