Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 401–500 of 1,000
Nitrogen-rich hierarchically porous polyaniline-based adsorbents for carbon dioxide (CO2) capture
Kutorglo, E. M., Hassouna, F., Beltzung, A., Kopecký, D., Sedlářová, I., & Šoóš, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.133 · Cited by 69
Li, D., Tian, Y., Li, L., Li, J., & Zhang, H. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0041-7 · Cited by 67
Geng, J., Xue, D., Liu, X., Shi, Y., & Sun, L. (2016) · AIChE Journal · doi:10.1002/aic.15531 · Cited by 68
Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture
Zhang, X., Elsayed, I., Song, X., Shmulsky, R., & Hassan, E. B. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.142465 · Cited by 70
Efficient N-Doped Porous Carbonaceous CO2 Adsorbents Derived from Commercial Urea-Formaldehyde Resin
Huang, J., Bai, J., Demir, M., Hu, X. D., Jiang, Z., & Wang, L. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c00748 · Cited by 67
Kamran, U., Rhee, K. Y., Lee, S.-Y., & Park, S.-J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133367 · Cited by 67
CO2 capture on KOH-activated carbons derived from yellow mombin fruit stones
Fiuza, R. A., de Andrade, R. C., & Andrade, H. M. C. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.09.025 · Cited by 68
Insights into the Hydrothermal Stability of Triamine‐Functionalized SBA‐15 Silica for CO2 Adsorption
Lashaki, M. J., Ziaei‐Azad, H., & Sayari, A. (2017) · ChemSusChem · doi:10.1002/cssc.201701439 · Cited by 69
O-containing hyper-cross-linked polymers and porous carbons for CO 2 capture
Liu, M., Shao, L., Huang, J., & Liu, Y. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.12.036 · Cited by 66
Biomass-based activated carbon for CO 2 adsorption–A review
Maniarasu, R., Rathore, S. K., & Murugan, S. (2022) · Energy & Environment · doi:10.1177/0958305x221093465 · Cited by 89
Sun, F., Liu, X., Gao, J., Pi, X., Wang, L., Qu, Z., & Qin, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08262a · Cited by 68
Peng, K., & Yang, H. (2017) · Chemical Communications · doi:10.1039/c7cc02334k · Cited by 66
Brown, A., McKeogh, B. J., Tompsett, G. A., Lewis, R. H., Deskins, N. A., & Timko, M. T. (2017) · Carbon · doi:10.1016/j.carbon.2017.09.051 · Cited by 69
Preparation and Characterization of Optimized Hydrochar from Paper Board Mill Sludge
Oumabady, S., S., P. S., Kamaludeen, S. P. B., Ramasamy, M., Kalaiselvi, P., & Parameswari, E. (2020) · Scientific Reports · doi:10.1038/s41598-019-57163-7 · Cited by 65
Shen, F., Wang, Y., Li, L., Zhang, K., Smith, R. L., & Qi, X. (2018) · Chemical Engineering Communications · doi:10.1080/00986445.2017.1367671 · Cited by 65
“Sevilla and Yang et al. reported that activated carbon prepared from at a KOH: HC ratio of 2 exhibited better adsorption capacity than the other ratios (Sevilla and Fuertes, 2011; Yang et al., 2015).”
BackgroundInfluentialDoping of alkali metals in carbon frameworks for enhancing CO2 capture: A theoretical study
Ma, X., Li, L., Chen, R., Wang, C., Zhou, K. C., & Li, H. (2018) · Fuel · doi:10.1016/j.fuel.2018.08.166 · Cited by 65
Screening Hoffman-type metal organic frameworks for efficient C2H2/CO2 separation
Lou, W., Li, J., Sun, W., Hu, Y., Wang, L., Ferreira, R. N. B., Steiner, M. B., Gu, Z., Luan, B., & Zhang, Y. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139296 · Cited by 65
Reza, M. S., Afroze, S., Kuterbekov, K. A., Kabyshev, A., Bekmyrza, K. Z., Haque, M. N., Islam, S. N., Hossain, M. A., Hassan, M., Roy, H., et al. (2023) · Sustainability · doi:10.3390/su15118815 · Cited by 70
High selectivity of TiC-CDC for CO2/N2 separation
Silvestre‐Albero, A., Rico‐Francés, S., Rodríguez-Reinoso, F., Kern, A. M., Klumpp, M., Etzold, B. J. M., & Silvestre‐Albero, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.012 · Cited by 67
“14 Recent analysis described in the literature has shown that carbon materials are excellent candidates for CO2 capture both at atmospheric and high pressure [1,2,26,33].”
BackgroundCorbin, J. C., Sierau, B., Beer, M. G., Laborde, M., Keller, A., Kim, J., Petzold, A., Onasch, T. B., Lohmann, U., & Mensah, A. A. (2014) · Atmospheric chemistry and physics · doi:10.5194/acp-14-2591-2014 · Cited by 80
“The third and fourth possibilities are not likely to be the major source of rCOx in RB. Desorption of adsorbed CO2 is expected to occur within minutes (Sevilla and Fuertes, 2011).”
BackgroundSevilla, M., Yu, L., Ania, C. O., & Titirici, M. (2014) · ChemElectroChem · doi:10.1002/celc.201402233 · Cited by 68
Self-citationProgress on CO2 capture by porous organic polymers
Gao, H., Li, Q., & Ren, S. (2018) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.11.015 · Cited by 65
Wang, L., Zhou, P., Guo, Y., Zhang, J., Xu, Q., Guan, Y., Yu, M., Zhu, H., & Zhang, Q. (2019) · RSC Advances · doi:10.1039/c8ra09932d · Cited by 65
Asadi-Sangachini, Z., Galangash, M. M., Younesi, H., & Nowrouzi, M. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-05842-3 · Cited by 67
Rouzitalab, Z., Maklavany, D. M., Jafarinejad, S., & Rashidi, A. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.125756 · Cited by 69
Pi, Z., Hou, K., Yao, F., He, L., Chen, S., Fu, Y., Li, X., & Yang, Q. X. (2022) · Carbon · doi:10.1016/j.carbon.2022.05.027 · Cited by 64
Fabrication of coconut shell-derived porous carbons for CO2 adsorption application
Bai, J., Huang, J., Yu, Q., Demir, M., Akgül, E. T., Altay, B. N., Hu, X. D., & Wang, L. (2023) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-022-2292-6 · Cited by 69
“proposing the presence of some mesoporous structures [41].”
BackgroundTian, L., Zhi, Y., Yu, Q., Xu, Q., Demir, M., Çolak, S. G., Farghaly, A. A., Wang, L., & Hu, X. D. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02372 · Cited by 64
Nitrogen-doped porous carbon spheres derived from d-glucose as highly-efficient CO2 sorbents
Xu, L., Guo, L., Hu, G., Chen, J., Hu, X., Wang, S., Dai, W., & Fan, M. (2015) · RSC Advances · doi:10.1039/c5ra04421a · Cited by 64
Mukhtar, A., Saqib, S., Mellon, N. B., Rafiq, S., Babar, M., Ullah, S., Muhammad, N., Khan, A. L., Ayoub, M., Ibrahim, M., et al. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123999 · Cited by 64
Yu, Q., Bai, J., Huang, J., Demir, M., Farghaly, A. A., Aghamohammadi, P., Hu, X. D., & Wang, L. (2023) · Molecules · doi:10.3390/molecules28041772 · Cited by 65
“Since the narrow micropores (<1 nm) were well-recognized as the key factor that determines the CO2 uptake of porous carbons under 1 bar and 25 °C conditions [59,60], herein, the volume of narrow micropores (Vn) in the MFC-T-m samples was calculated using the Dubinin−Radushkevich (D−R) equation based on their CO2 adsor…”
Activated carbon derived from waste coffee grounds for stable methane storage
Kemp, K. C., Baek, S. B., Lee, W., Meyyappan, M., & Kim, K. S. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/38/385602 · Cited by 63
Sha, Y., Lou, J., Bai, S., Wu, D., Liu, B., & Ling, Y. (2015) · Materials Research Bulletin · doi:10.1016/j.materresbull.2015.01.015 · Cited by 62
Park, J., Cho, S. Y., Jung, M., Lee, K., Nah, Y., Attia, N. F., & Oh, H. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101404 · Cited by 67
The Reinforced Separation of Intractable Gas Mixtures by Using Porous Adsorbents
Ke, Q., Xiong, F., Fang, G., Chen, J., Niu, X., Pan, P., Cui, G., Xing, H., & Lu, H. (2024) · Advanced Materials · doi:10.1002/adma.202408416 · Cited by 64
Wang, J., Krishna, R., Yang, J., & Deng, S. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01652 · Cited by 62
de Souza, L. K. C., Gonçalves, A. A. S., Queiroz, L. S., Chaar, J. S., Filho, G. N. D. R., & da Costa, C. E. F. (2020) · Sustainable materials and technologies · doi:10.1016/j.susmat.2020.e00168 · Cited by 67
Lorente, A., Remón, J., Salgado-Ramos, M., Huertas-Alonso, A. J., Sánchez‐Verdú, P., Moreno, A., & Clark, J. H. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06853 · Cited by 63
Zhou, L., Lin, X., Huang, T., & Yu, A. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.041 · Cited by 61
Solid‐waste‐Derived carbon dioxide‐capturing materials
Wang, J., Yang, Y., Jia, Q., Shi, Y., Guan, Q., Yang, N., Ning, P., & Wang, Q. (2019) · ChemSusChem · doi:10.1002/cssc.201802655 · Cited by 60
Wan, L., Wang, J., Sun, Y., Feng, C., & Li, K. (2014) · RSC Advances · doi:10.1039/c4ra13637c · Cited by 63
Spontaneous Cooling Absorption of CO2 by a Polymeric Ionic Liquid for Direct Air Capture
Wang, T., Hou, C., Ge, K., Lackner, K. S., Shi, X., Liu, J., Fang, M., & Luo, Z. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01726 · Cited by 60
Huang, G., Wu, X., Hou, Y., & Cai, J. (2019) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-019-00412-6 · Cited by 66
Lee, D., Zhang, C., Wei, C., Ashfeld, B. L., & Gao, H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13424e · Cited by 59
Chen, J., Sun, J., Chen, Y., Guo, Y., Han, D., Wang, R., & Zhao, C. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119270 · Cited by 58
Liao, Y., Cheng, Z., Trunk, M., & Thomas, A. (2017) · Polymer Chemistry · doi:10.1039/c7py01439b · Cited by 59
Guo, X., Zhang, G., Wu, C., Liu, J., Li, G., Zhao, Y., Wang, Y., & Xu, Y. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105165 · Cited by 59
Polyvinyl Chloride‐Derived Carbon Spheres for CO2 Adsorption
Wang, J., Wang, F., Duan, H., Li, Y., Xu, J., Huang, Y., Liu, B., & Zhang, T. (2020) · ChemSusChem · doi:10.1002/cssc.202002230 · Cited by 58
Activated carbon derived from Biomass combustion bottom ash as solid sorbent for CO2 adsorption
Gorbounov, M., Petrovic, B., Ozmen, S., Clough, P. T., & Soltani, S. M. (2023) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2023.04.057 · Cited by 60
Probing the role of O-containing groups in CO2 adsorption of N-doped porous activated carbon
Wang, M., Fan, X., Zhang, L., Liu, J., Wang, B., Cheng, R., Li, M., Tian, J., & Shi, J. (2017) · Nanoscale · doi:10.1039/c7nr05977a · Cited by 57
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.04.088 · Cited by 58
Kamran, U., & Park, S. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.03.069 · Cited by 57
Cheng, Z. H., Liu, X., Diao, R., Qi, F., & Ma, P. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150227 · Cited by 57
Synthesis, characterization and evaluation of activated spherical carbon materials for CO2 capture
Sun, N., Sun, C., Liu, H., Liu, J., Stevens, L. A., Drage, T. C., Snape, C. E., Li, K., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2013.03.047 · Cited by 66
Facile One‐Pot Synthesis of Activated Porous Biocarbons with a High Nitrogen Content for CO2 Capture
Singh, G., Lakhi, K. S., Park, D., Srivastava, P., Naidu, R., & Vinu, A. (2017) · ChemNanoMat · doi:10.1002/cnma.201700348 · Cited by 62
Li, K., Jiang, J., Chen, X., Gao, Y., Yan, F., & Tian, S. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b08788 · Cited by 56
Development of Low-Cost Porous Carbons through Alkali Activation of Crop Waste for CO 2 Capture
Wang, X., Zeng, W.-L., Kong, X., Xin, C., Dong, Y., Hu, X., & Guo, Q. (2022) · ACS Omega · doi:10.1021/acsomega.2c06109 · Cited by 59
Åhlén, M., Cheung, O. Y. H., & Xu, C. (2023) · Dalton Transactions · doi:10.1039/d2dt04088c · Cited by 60
Chemical Activation of Banana Peel Waste-Derived Biochar Using KOH and Urea for CO2 Capture
Sreńscek-Nazzal, J., Kamińska, A., Serafin, J., & Michalkiewicz, B. (2024) · Materials · doi:10.3390/ma17040872 · Cited by 65
Dutta, A., Pramanik, M., Patra, A. K., Nandi, M., Uyama, H., & Bhaumik, A. (2012) · Chemical Communications · doi:10.1039/c2cc32298f · Cited by 56
Haffner-Staton, E., Balahmar, N., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06407h · Cited by 56
Cox, M., & Mokaya, R. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00300e · Cited by 67
Xu, C., Ruan, C., Li, Y., Lindh, J., & Strømme, M. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700147 · Cited by 61
Renewable biochar derived from mixed sewage sludge and pine sawdust for carbon dioxide capture
Li, K., Niu, X., Zhang, D., Guo, H., Zhu, X., Yin, H., Lin, Z., & Fu, M. (2022) · Environmental Pollution · doi:10.1016/j.envpol.2022.119399 · Cited by 58
Nitrogen-doped carbon based on peptides of hair as electrode materials for surpercapacitors
Guo, Z., Zhou, Q., Wu, Z., Zhang, Z., Zhang, W., Zhang, Y., Li, L., Cao, Z., Wang, H., & Gao, Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.09.112 · Cited by 55
Qu, W.-H., Guo, Y., Shen, W., & Li, W. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b05136 · Cited by 55
Enhanced CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from Commercial Phenolic Resin
Yue, L., Rao, L., Wang, L., Sun, Y. J., Wu, Z., DaCosta, H. F. M., & Hu, X. D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03646 · Cited by 58
Carbon nanotube silica composite hollow fibers impregnated with polyethylenimine for CO2 capture
Keller, L., Ohs, B., Abduly, L., & Wessling, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.100 · Cited by 57
Efimov, M. N., Vasilev, A. A., Muratov, D. G., Baranchikov, A. E., & Karpacheva, G. P. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103514 · Cited by 57
Zhang, S., Zang, L., Dou, T., Zou, J., Zhang, Y., & Sun, L. (2020) · ACS Omega · doi:10.1021/acsomega.9b03718 · Cited by 57
Rashidi, N. A., Bokhari, A., & Yusup, S. B. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-08823-z · Cited by 62
Sun, J., Li, H., Liu, Q., Zhong, W., & Dong, W. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.165890 · Cited by 70
Chen, W., Wang, X., Hashisho, Z., Feizbakhshan, M., Shariaty, P., Niknaddaf, S., & Zhou, X. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.01.042 · Cited by 54
Highly Selective CO2 Uptake in Novel Fishnet-like Polybenzoxazine-Based Porous Carbon
Lin, H. Q., Ju, S., Liu, X., Zhuang, Q., Zhan, G., & Yu, X. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b02631 · Cited by 54
Shao, S., Wang, Y., Ma, L., Huang, Z., & Li, X. (2023) · Fuel · doi:10.1016/j.fuel.2023.129287 · Cited by 55
Recent developments in polysaccharide and lignin-based (nano)materials for CO 2 capture
Nezafat, Z., Nasrollahzadeh, M., Javanshir, S., Baran, T., & Dong, Y. (2023) · Green Chemistry · doi:10.1039/d3gc02373g · Cited by 56
Liu, F.-Q., Li, W., Zhao, J., Li, W.-H., Chen, D.-M., Sun, L.-S., Wang, L., & Li, R.-X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01536g · Cited by 53
Shen, Z., Song, Y., Yin, C., Luo, X., Wang, Y., & Li, X. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111158 · Cited by 53
Lou, Y.-C., Qi, S.-C., Xue, D.-M., Gu, C., Zhou, R., Liu, X.-Q., & Sun, L.-B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125845 · Cited by 52
Ramar, V., & Balraj, A. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c02585 · Cited by 54
Amine functionalized benzene based hypercrosslinked polymer as an adsorbent for CO2/N2 adsorption
Moradi, M. R., Torkashvand, A., Penchah, H. R., & Ghaemi, A. (2023) · Scientific Reports · doi:10.1038/s41598-023-36434-4 · Cited by 53
Sorption of Soil Carbon Dioxide by Biochar and Engineered Porous Carbons
Ringsby, A. J., Ross, C. M., & Maher, K. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.4c02015 · Cited by 54
Shao, J., Wang, Y., Liu, C., Xiao, Q., Demir, M., Mesfer, M. K. A., Danish, M., Wang, L., & Hu, X. D. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106946 · Cited by 53
Potassium metaborate-activated boron-doped porous carbons for selective CO2 adsorption
Wang, J., Yin, Y., Liu, X., Liu, Y., Xiao, Q., Zhao, L., Demir, M., Çolak, M. Ö. A., Wang, L., & Hu, X. D. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.134079 · Cited by 55
Synergetic effect of carbon nanopore size and surface oxidation on CO2 capture from CO2/CH4 mixtures
Furmaniak, S., Kowalczyk, P., Terzyk, A. P., Gauden, P. A., & Harris, P. J. F. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.01.044 · Cited by 52
Peng, Z., Guo, Z., Chu, W., & Wei, M. (2016) · RSC Advances · doi:10.1039/c5ra26044b · Cited by 58
High-Surface-Area Mesoporous Activated Carbon from Hemp Bast Fiber Using Hydrothermal Processing
Hossain, M. Z., Wu, W. H., Xu, W. Z., Chowdhury, M. B. I., Jhawar, A. K., Machin, D., & Charpentier, P. A. (2018) · C – Journal of Carbon Research · doi:10.3390/c4030038 · Cited by 59
Mukherjee, S., Das, M., Manna, A., Krishna, R., & Das, S. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b05365 · Cited by 52
Iranvandi, M., Tahmasebpoor, M., Azimi, B., Heidari, M. A., & Pevida, C. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122625 · Cited by 52
Serafin, J., Dziejarski, B., & Sreńscek-Nazzal, J. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00717 · Cited by 61
Mehrmohammadi, P., & Ghaemi, A. (2023) · Scientific Reports · doi:10.1038/s41598-023-48683-4 · Cited by 57
Cost‐Effective Synthesis of Amine‐Tethered Porous Materials for Carbon Capture
Lu, W., Bosch, M., Yuan, D., & Zhou, H.-C. “. (2014) · ChemSusChem · doi:10.1002/cssc.201402622 · Cited by 54
Hydrothermal synthesis of N-doped spherical carbon from carboxymethylcellulose for CO 2 capture
Wu, Q., Li, W., Liu, S., & Jin, C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.02.022 · Cited by 53
Patel, H. A., Ko, D., & Yavuz, C. T. (2014) · Chemistry of Materials · doi:10.1021/cm503627p · Cited by 51
Cibien, L., Parot, M., Fotsing, P. N., Gaveau, P., Woumfo, E. D., Vieillard, J., Napoli, A., & Brun, N. (2020) · Green Chemistry · doi:10.1039/d0gc01510e · Cited by 56
Biochar as a cost-effective and eco-friendly substitute for binder in concrete: a review
Singhal, S. (2022) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2022.2068658 · Cited by 60
“Sevilla and Fuertes (2011) obtained larger fractions of narrow micropores ( 1 nm diameter) by activating sawdust-derived biochar sample with KOH (KOH:biochar ¼ 4) at 600–700 C (Sevilla & Fuertes, 2011).”
BackgroundAdvancement pathway of biochar resources from macroalgae biomass: A review
Chen, B., Gu, Z., Wu, M., Ma, Z., Lim, H. R., Khoo, K. S., & Show, P. L. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106650 · Cited by 49
Lobato, M. P., Yue, H., Brun, N., Ellis, G., Naffakh, M., & Shuttleworth, P. S. (2024) · Polymers · doi:10.3390/polym16182633 · Cited by 58
Shao, J., Wang, Y., Che, M., Liu, Y., Jiang, Y., Xiao, Q., Demir, M., Wang, L., & Hu, X. D. (2025) · Molecules · doi:10.3390/molecules30020426 · Cited by 50
Emmanuel, O., Rozina, R., & Ezeji, T. C. (2025) · Next Sustainability · doi:10.1016/j.nxsust.2025.100108 · Cited by 62
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.