Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 501–600 of 1,000
A review on the effect of amination pretreatment for the selective separation of CO2
Adelodun, A. A., Kim, K., Ngila, J. C., & Szulejko, J. E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.107 · Cited by 56
Kim, K., Kwon, Y., Lee, T., Cho, S. J., & Ryoo, R. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.082 · Cited by 50
Rehman, A., & Park, S.-J. (2018) · Scientific Reports · doi:10.1038/s41598-018-24308-z · Cited by 49
Gan, F., Wang, B., Jin, Z., Xie, L., Dai, Z., Zhou, T., & Jiang, X. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144529 · Cited by 53
Deepak, K. R., Mohan, S., Dinesha, P., & Balasubramanian, R. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.118350 · Cited by 53
Bali, S., Leisen, J., Foo, G. S., Sievers, C., & Jones, C. W. (2014) · ChemSusChem · doi:10.1002/cssc.201402373 · Cited by 51
Deniz, E., Karadaş, F., Patel, H. A., Aparício, S., Yavuz, C. T., & Atilhan, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.03.015 · Cited by 56
Fungi-derived hierarchically porous carbons for high-performance supercapacitors
Wang, J., & Liu, Q. (2014) · RSC Advances · doi:10.1039/c4ra13358g · Cited by 49
Xu, M., Huang, Q., Sun, R., & Wang, X. (2016) · RSC Advances · doi:10.1039/c6ra18725k · Cited by 50
de Yuso, A. M., Fina, M. D., Niță, C., Fioux, P., Parmentier, J., & Ghimbeu, C. M. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.12.001 · Cited by 53
CO2 Adsorption of Nitrogen-Doped Carbons Prepared from Nitric Acid Preoxidized Petroleum Coke
Yang, J., Yue, L., Lin, B., Wang, L., Zhao, Y., Lin, Y., Chang, K., DaCosta, H., & Hu, X. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01795 · Cited by 48
Zhang, X., Li, H., Zhang, K., Wang, Q., Qin, B., Cao, Q., & Jin, L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0491910jes · Cited by 50
Nitrogen-doped hierarchically porous carbon spheres for low concentration CO2 capture
Li, Y., Wang, J., Fan, S., Wang, F., Shen, Z., Duan, H., Xu, J., & Huang, Y. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.05.019 · Cited by 49
Li, Y., Wang, Y., Chen, B., Wang, L., Yang, J., & Wang, B. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108847 · Cited by 48
Liu, S., Wang, A., Liu, Y., Zhou, W., Wen, H., Zhang, H., Sun, K., Li, S., Zhou, J., Wang, Y., et al. (2024) · Advanced Science · doi:10.1002/advs.202308040 · Cited by 67
Zhang, J., Zhang, Z., Li, Q., Qu, Y., & Jiang, S. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0451414jes · Cited by 48
Sun, N., Tang, Z., Wei, W., Snape, C. E., & Sun, Y. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00009 · Cited by 55
“In Fuertes et al.’s work, hydrochar that was obtained by hydrothermal treatment of selected biomass was submitted to KOH activation, a high CO2 adsorption capacity of 21.2 wt. % was achieved at 25°C and 1 bar (Sevilla and Fuertes, 2011).”
BackgroundMethodInfluentialDing, N., Liu, J., & Ma, W. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.081 · Cited by 48
Carbon foam with microporous cell wall and strut for CO 2 capture
Narasimman, R., Vijayan, S., & Prabhakaran, K. (2013) · RSC Advances · doi:10.1039/c3ra46240d · Cited by 48
Dang, Y., Guo, W., Zhao, L., & Zhu, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10836 · Cited by 48
Polyacrylonitrile-derived nitrogen enriched porous carbon fiber with high CO2 capture performance
Ma, C., Bai, J., Demir, M., Yu, Q., Hu, X. D., Jiang, W., & Wang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122299 · Cited by 49
Pi, Z., Hou, K., Yao, F., He, L., Chen, S., Tao, Z., Zhou, P., Wang, D., Li, X., & Yang, Q. X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131749 · Cited by 49
Designed azo-linked conjugated microporous polymers for CO2 uptake and removal applications
Saber, A. F., Chen, K.-Y., EL‐Mahdy, A. F. M., & Kuo, S. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02803-8 · Cited by 47
Miao, Z., Wu, J., Qiu, G., Guo, Z., Zhao, X., & Zhang, Y. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153347 · Cited by 47
Recent progress on direct air capture of carbon dioxide
Sun, J., Zhao, M., Huang, L., Zhang, T., & Wang, Q. (2023) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2023.100752 · Cited by 67
Gautam, G., Serafin, J., Vikram, S., Dziejarski, B., & Sahoo, S. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137406 · Cited by 50
Sustainable hydrothermal carbon for advanced electrochemical energy storage
Zhang, X., Cao, T., Zhang, G., Liu, Q., Kong, G., Wang, K., Jiang, Y., Zhang, X., & Han, L. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta07372f · Cited by 51
N, S Co-doped porous carbons from coconut shell for selective CO2 adsorption
Shao, J., Wang, Y., Che, M., Xiao, Q., Demir, M., Mesfer, M. K. A., Wang, L., Hu, X. D., & Liu, Y. (2025) · Journal of the Energy Institute · doi:10.1016/j.joei.2025.102273 · Cited by 49
Plant derived porous graphene nanosheets for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2014) · RSC Advances · doi:10.1039/c4ra05522e · Cited by 47
Waste wool derived nitrogen-doped hierarchical porous carbon for selective CO 2 capture
Li, Y., Xu, R., Wang, X., Wang, B., Cao, J., Yang, J., & Wei, J. (2018) · RSC Advances · doi:10.1039/c8ra02701c · Cited by 52
Rao, L., Yue, L., Wang, L., Wu, Z., Ma, C., An, L., & Hu, X. D. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02659 · Cited by 48
Phuriragpitikhon, J., Ghimire, P. P., & Jaroniec, M. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.09.071 · Cited by 50
Influence of ammonia treatment on the CO2 adsorption of activated carbon
Mochizuki, Y., Bud, J., Byambajav, E., & Tsubouchi, N. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107273 · Cited by 50
Liu, D., Shao, L., Zhan, P., Zhang, L., Wu, Z., Wang, J., Ma, X., & Huang, J. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127657 · Cited by 48
Hao, W., Björkman, E. E., Yun, Y., Lilliestråle, M., & Hedin, N. (2014) · ChemSusChem · doi:10.1002/cssc.201300912 · Cited by 49
Ghosh, S., & Ramaprabhu, S. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.06.022 · Cited by 47
Balahmar, N., & Mokaya, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06308k · Cited by 56
A scientometric review of biochar preparation research from 2006 to 2019
Jiao, Y., Li, D., Wang, M., Gong, T., Sun, M., & Yang, T. (2021) · Biochar · doi:10.1007/s42773-021-00091-5 · Cited by 49
“The existence of oxygen-containing groups on the surface of hydrochar benefits its good affinity for water, and thus it can be used to increase water retention capacity of soil (Sevilla and Fuertes 2011).”
BackgroundPérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Low-cost hierarchical micro/macroporous carbon foams as efficient sorbents for CO 2 capture
Rodríguez, E., & García, R. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.09.002 · Cited by 51
“N-enriched porous carbon monoliths [6] 3.”
BackgroundEn-jie, W., Sui, Z., Sun, Y., Ma, Z., & Han, B. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b04370 · Cited by 45
Guo, L., Li, W., Qiu, B., Ren, Z.-X., Du, J., & Lu, A. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12122b · Cited by 45
Zhang, M., Igalavithana, A. D., Xu, L., Sarkar, B., Hou, D., Zhang, M., Bhatnagar, A., Cho, W. C., & Ok, Y. S. (2020) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2020.1780102 · Cited by 46
“The optimum activation of hydrochar by K2C2O4 and C3H6N6 (i.e. K2C2O4/hydrochar ¼ 3.6–6, and C3H6N6/hydrochar ¼ 2) generated HPC showed 3000m2 g 1 of SSA which was similar to HPC obtained under harsh KOH activation conditions (Fuertes & Sevilla, 2015; Sevilla & Fuertes, 2011).”
MethodInfluentialHou, Z.-Q., Luo, M., Yang, Y., Zhou, J., Liu, L., & Cai, J. (2021) · New Carbon Materials · doi:10.1016/s1872-5805(21)60020-3 · Cited by 46
Biomass-based hydrothermal carbons for catalysis and environmental cleanup: a review
John, K. I., & Omorogie, M. O. (2022) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2022.2028017 · Cited by 49
Cao, M., Shu, Y., Bai, Q., Li, C., Chen, B., Shen, Y., & Uyama, H. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.163750 · Cited by 44
Machine learning to assess CO2 adsorption by biomass waste
Maheri, M., Bazán, C., Zendehboudi, S., & Usefi, H. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2023.102590 · Cited by 44
Is heteroatom doping of activated carbons always a good strategy for enhancing CO2 adsorption?
Morales-Ospino, R., Canevesi, R. L. S., Schaefer, S., Celzard, A., & Fierro, V. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147638 · Cited by 42
Preparation and adsorption properties of aerocellulose-derived activated carbon monoliths
Dassanayake, R. S., Gunathilake, C. A., Jackson, T., Jaroniec, M., & Abidi, N. (2016) · Cellulose · doi:10.1007/s10570-016-0886-1 · Cited by 47
Ning, H., Yang, Z., Wang, D., Meng, Z., Li, Y., Ju, X., & Wang, C. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110700 · Cited by 44
Esfahani, H. J., Ghaemi, A., & Shahhosseini, S. (2024) · Scientific Reports · doi:10.1038/s41598-024-69767-9 · Cited by 42
“Consequently, a growing focus has been on carbon capture and storage (CCS) technology worldwide 1 .”
BackgroundD-glucose-derived S-doped porous carbon: Sustainable and effective CO2 adsorption
Xu, Q., Wang, J., Feng, J., Liu, C., Xiao, Q., Demir, M., Şimşek, U. B., Kılıç, M., Wang, L., & Hu, X. D. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.136054 · Cited by 43
One-step synthesis of K3PO4-activated phosphorus-enriched carbons for enhanced carbon capture
Zhi, Y., Yin, Y., Ciren, Q., Xiao, Q., Zhao, L., Demir, M., Şimşek, U. B., Hu, X. D., & Wang, L. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.116694 · Cited by 43
Gil, R. R., Ruíz, B., Lozano, M. S., & Fuente, E. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.001 · Cited by 43
Ren, M., Tianyun, Z., Wang, Y., Jia, Z., & Cai, J. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2927-7 · Cited by 44
Li, C., He, P., Jia, L., Zhang, X., Zhang, T., Dong, F., He, M., Wang, S., Zhou, L., Yang, T., et al. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.01.004 · Cited by 44
Highly Selective CO2 Capture on Waste Polyurethane Foam-Based Activated Carbon
Ge, C., Lian, D., Cui, S., Gao, J., & Lu, J. (2019) · Processes · doi:10.3390/pr7090592 · Cited by 42
One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance
Yu, Q., Bai, J., Huang, J., Demir, M., Altay, B. N., Hu, X. D., & Wang, L. (2022) · Molecules · doi:10.3390/molecules27206816 · Cited by 44
“Previous studies have pointed out the importance of narrow micropores (<1 nm) that allow higher CO2 adsorption and CO2/N2 selectivity [44,45].”
BackgroundFrom cellulose to graphene-like porous carbon nanosheets
Perondi, D., Bassanesi, G. R., Manera, C., Lazzari, L. K., Godinho, M., Zattera, A. J., & Dotto, G. L. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111217 · Cited by 42
Zheng, S., Zeng, S., Li, G., Yao, X., Li, Z., & Zhang, X. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138736 · Cited by 41
Progress and development of biochar as a catalyst for hydrogen production
Mishra, R., Shu, C., Ong, H. C., Gollakota, A. R. K., & Kumar, S. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143853 · Cited by 45
Chen, J., Zhu, R., Huang, J. D., Zhang, M., Liu, H., Sun, M., Wang, L., & Song, Y. (2015) · The Analyst · doi:10.1039/c5an00200a · Cited by 42
CO2 Capture with Activated Carbons Prepared by Petroleum Coke and KOH at Low Pressure
Zhu, X., Fu, Y., Hu, G., Shen, Y., Dai, W., & Hu, X. D. (2012) · Water Air & Soil Pollution · doi:10.1007/s11270-012-1387-y · Cited by 44
Wickramaratne, N. P., & Jaroniec, M. (2013) · Adsorption · doi:10.1007/s10450-013-9572-x · Cited by 43
“In the recent years, various types of porous adsorbents, including metal organic frameworks (MOF), zeolites, silica, metal oxides, and carbon materials have been investigated for CO2 capture (An et al. 2010; Liu et al. 2012a; Grajciar et al. 2012; Zukal et al. 2011; Broda and Müller 2012; Sevilla and Fuertes 2011).”
BackgroundAshourirad, B., Arab, P., Verlander, A., & El‐Kaderi, H. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00567 · Cited by 42
Balahmar, N., Lowbridge, A. M., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06176a · Cited by 46
Li, Y., Li, Y., Zhu, X., Hu, J., & Liu, H. (2016) · International Journal of Coal Science & Technology · doi:10.1007/s40789-016-0148-8 · Cited by 41
“…categories of novel materials with extraordinary porosity have been discovered, including silicas (Suhendi et al. 2013), zeolites (Wakihara et al. 2010), metal–organic frameworks (Li et al. 2014), zeolitic imidazolate frameworks (Cai et al. 2014) and carbon materials (Sevilla and Fuertes 2011).”
BackgroundRecent progress of amine modified sorbents for capturing CO2 from flue gas
Zhao, X., Cui, Q., Wang, B., Yan, X., Singh, S., Zhang, F., Gao, X., & Li, Y. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.04.009 · Cited by 46
Ashley, M. J., Magiera, C., Ramidi, P., Blackburn, G., Scott, T. G., Gupta, R., Wilson, K., Ghosh, A., & Biswas, A. (2012) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1317 · Cited by 44
Huang, F. P., Li, D., Wang, L., Zhang, K., Fu, L., Guo, Z., Liang, M., Wang, B., Luo, D., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105047 · Cited by 42
Tailoring zeolites for enhanced post-combustion CO2 capture: A critical review
Whaieb, A. H., Jasim, F. T., Abdulrahman, A. A., Khuder, I. M., Gheni, S. A., Fattah, I. M. R., & Karakullukçu, N. T. (2025) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2025.100451 · Cited by 48
Synthesis of bare and functionalized porous adsorbent materials for CO2 capture
Olajire, A. A. (2017) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1657 · Cited by 44
Inedible saccharides: a platform for CO 2 capturing
Qaroush, A. K., Alshamaly, H. S., Alazzeh, S. S., Abeskhron, R. H., Assaf, K. I., & Eftaiha, A. F. (2018) · Chemical Science · doi:10.1039/c7sc04706a · Cited by 40
Wang, X., Hui, W., Hu, A., Li, X., Li, Y., & Wang, H. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100468 · Cited by 41
Exceptional CO2Adsorbing Materials under Different Conditions
Nandi, M., & Uyama, H. (2014) · The Chemical Record · doi:10.1002/tcr.201402062 · Cited by 40
Cadmium removal in waste water by nanostructured TiO 2 particles
Zha, R., Nadimicherla, R., & Guo, X. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02106a · Cited by 40
Recovery of silicon from sewage sludge for production of high-purity nano-SiO2
Zou, J., Dai, Y., Pan, K., Jiang, B., Tian, C., Tian, G., Zhou, W., Wang, L., Wang, X., & Fu, H. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.10.087 · Cited by 40
Ghosh, S., Sevilla, M., Fuertes, A. B., Andreoli, E., Ho, J., & Barron, A. R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04936b · Cited by 42
Self-citationSalimi, M., Balou, S., Kohansal, K., Babaei, K., Tavasoli, A., & Andache, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b02440 · Cited by 44
Ng, W., Yang, Y., van der Veen, K., Rothenberg, G., & Yan, N. (2017) · Carbon · doi:10.1016/j.carbon.2017.12.019 · Cited by 42
Adlak, K., Chandra, R., Vijay, V. K., & Pant, K. K. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105102 · Cited by 40
Zeng, G., Lou, S., Ying, H., Wu, X., Dou, X., Ai, N., & Wang, J. (2018) · Journal of Chemistry · doi:10.1155/2018/4319149 · Cited by 44
“*is is due to the fact that the interaction energy of CO2molecules and adsorbent can be greatly enhanced due to the overlapping of the potential fields from the adjacent walls when the adsorption occurs in narrow micropores [21, 24].”
BackgroundCharacterization and evaluation of low-cost biomass-based-AC for CO2 capture: A review
Khoshraftar, Z., Masoumi, H., & Ghaemi, A. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100373 · Cited by 41
Uncatalyzed and acid-aided microwave hydrothermal carbonization of orange peel waste
Lei, Q., Kannan, S., & Raghavan, V. (2021) · Waste Management · doi:10.1016/j.wasman.2021.02.058 · Cited by 43
Li, Y., Wang, Y., Liu, N., Wang, B., & Dong, R. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130732 · Cited by 38
Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations
Bari, G. A. K. M. R., & Jeong, J.-H. (2023) · Surfaces · doi:10.3390/surfaces6030023 · Cited by 43
Li, J., Wang, T., Hao, T., Yao, X., Xu, K., & Liu, J. (2025) · Energy · doi:10.1016/j.energy.2025.134734 · Cited by 43
Chen, G., Wang, X., Li, J., Hou, W., Zhou, Y. T., & Wang, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04842 · Cited by 40
Epoxy based oxygen enriched porous carbons for CO 2 capture
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.128 · Cited by 38
CF4 adsorption on porous carbon derived from silicon carbide
Choi, S. W., Yoon, H. J., Lee, H. J., Lee, E.-S., Lim, D., & Lee, K. B. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110373 · Cited by 38
Aljumialy, A. M., & Mokaya, R. (2020) · Materials Advances · doi:10.1039/d0ma00449a · Cited by 47
Seah, G. L., Wang, L., Tan, L. F., Tipjanrawee, C., Sasangka, W. A., Usadi, A. K., McConnachie, J. M., & Tan, K. W. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06151 · Cited by 40
Recent progress and innovation in carbon capture and storage using bioinspired materials
Kumar, P., & Kim, K. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.03.095 · Cited by 39
Lu, T., Ma, C., Demir, M., Yu, Q., Aghamohammadi, P., Wang, L., & Hu, X. D. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122053 · Cited by 38
Lu, T., Bai, J., Huang, J., Yu, Q., Demir, M., Kılıç, M., Altay, B. N., Wang, L., & Hu, X. D. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c04320 · Cited by 38
Nazir, G., Rehman, A., Ikram, M., Aslam, M., Zhang, T. C., Khalid, A., Aftab, S., Hussain, S., Almukhlifi, H. A., Hafez, A. A. A., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154704 · Cited by 37
Zhou, L., Huang, T., & Yu, A. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500459c · Cited by 37
Amide linked conjugated porous polymers for effective CO2 capture and separation
Manoranjan, N., Won, D. H., Kim, J., & Woo, S. I. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.05.001 · Cited by 37
Seredych, M., Rodríguez-Castellón, E., & Bandosz, T. J. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.028 · Cited by 37
Alkyl-Aryl Amine-Rich Molecules for CO2 Removal via Direct Air Capture
Kumar, D. R., Rosu, C., Sujan, A. R., Sakwa‐Novak, M. A., Ping, E. W., & Jones, C. W. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03706 · Cited by 73
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.