The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Sustainable porous carbons with a superior performance for CO2 capture
Open accessAbstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Qie, L., Chen, W., Wang, Z., Shao, Q., Li, X., Yuan, L., Hu, X., Zhang, W., & Huang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104634 · Cited by 1,656
Energy storage applications of activated carbons: supercapacitors and hydrogen storage
Sevilla, M., & Mokaya, R. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43525c · Cited by 1,614
Self-citationSun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Dutta, S., Bhaumik, A., & Wu, K. C.-W. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01075b · Cited by 1,413
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Titirici, M.-M., White, R. J., Brun, N., Budarin, V. L., Su, D. S., del Monte, F., Clark, J. H., & MacLachlan, M. J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00232f · Cited by 1,277
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Self-citationTitirici, M.-M., White, R. J., Falco, C., & Sevilla, M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21166a · Cited by 921
Self-citationRecent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
“(2014) Activated carbon/cellulose 2370 1.2 0.0058 Sevilla and Fuertes (2011) Activated carbon/starch 2850 1.2 0.0055 Sevilla and Fuertes (2011) Activated carbon/olive stone 1215 – 0.0031 González et al.”
BackgroundInfluentialEmerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Insights into Biochar and Hydrochar Production and Applications: A Review
Zhang, Z., Zhu, Z., Shen, B., & Liu, L. (2019) · Energy · doi:10.1016/j.energy.2019.01.035 · Cited by 687
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Biomass derived porous carbon for CO2 capture
Singh, G., Lakhi, K. S., Sil, S., Bhosale, S. V., Kim, I., Albahily, K., & Vinu, A. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.050 · Cited by 555
Zhao, Y., Yao, K. X., Teng, B., Zhang, T., & Han, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42548g · Cited by 525
Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption
Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122736 · Cited by 519
Porous carbon-based materials for hydrogen storage: advancement and challenges
Xia, Y., Yang, Z., & Zhu, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10583k · Cited by 496
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Self-citationXu, B., Hou, S., Cao, G., Wu, F., & Yang, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32759g · Cited by 404
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
Biomass-derived carbon electrode materials for supercapacitors
Lu, H., & Zhao, X. S. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00099e · Cited by 396
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
Review of post-combustion carbon dioxide capture technologies using activated carbon
Mukherjee, A., Okolie, J. A., Abdelrasoul, A., Niu, C., & Dalai, A. K. (2019) · Journal of Environmental Sciences · doi:10.1016/j.jes.2019.03.014 · Cited by 384
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Singh, G., Kim, I. Y., Lakhi, K. S., Srivastava, P., Naidu, R., & Vinu, A. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.015 · Cited by 379
Si, W., Zhou, J., Zhang, S., Li, S., Xing, W., & Zhuo, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.065 · Cited by 367
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Ye, Y., Xian, S., Cui, H., Tan, K., Gong, L., Liang, B., Pham, T., Pandey, H., Krishna, R., Lan, P. C., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10620 · Cited by 359
A Robust Binary Supramolecular Organic Framework (SOF) with High CO2 Adsorption and Selectivity
Lü, J., Perez-Krap, C., Suyetin, M., Alsmail, N. H., Yan, Y., Yang, S., Lewis, W., Bichoutskaia, E., Tang, C. C., Blake, A. J., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506577g · Cited by 357
Reza, M. T., Rottler, E., Herklotz, L., & Wirth, B. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.02.024 · Cited by 350
Ahmed, R., Liu, G., Yousaf, B., Abbas, Q., Ullah, H., & Ali, M. U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118409 · Cited by 349
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Chitosan derived nitrogen-doped microporous carbons for high performance CO2 capture
Fan, X., Zhang, L., Zhang, G., Shu, Z., & Shi, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.026 · Cited by 345
“potentials and thus are beneficial to the adsorption of CO2 molecules [22].”
BackgroundComprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity
Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.032 · Cited by 322
Zhou, X., Zhu, Y., Niu, Q., Zeng, G., Lai, C., Liu, S., Huang, D., Qin, L., Liu, X., Li, B., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129027 · Cited by 319
Defect‐Rich Soft Carbon Porous Nanosheets for Fast and High‐Capacity Sodium‐Ion Storage
Yao, X., Ke, Y., Ren, W., Wang, X., Xiong, F., Yang, W., Qin, M., Li, Q., & Mai, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803260 · Cited by 320
Yao, F., Pham, D. T., & Lee, Y. H. (2015) · ChemSusChem · doi:10.1002/cssc.201403490 · Cited by 312
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Lucian, M., Volpe, M., Gao, L., Piro, G., Goldfarb, J. L., & Fiori, L. (2018) · Fuel · doi:10.1016/j.fuel.2018.06.060 · Cited by 300
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
Gupta, S., & Kua, H. W. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001924 · Cited by 293
Li, Y., Samad, Y. A., Polychronopoulou, K., Alhassan, S. M., & Liao, K. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00839a · Cited by 291
Activated carbon preparation from biomass feedstock: Clean production and carbon dioxide adsorption
Ahmed, M. B., Hasan Johir, M. A., Zhou, J. L., Ngo, H. H., Nghiem, L. D., Richardson, C., Moni, M. A., & Bryant, M. R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.342 · Cited by 281
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Highly selective CO2 capture by S-doped microporous carbon materials
Seema, H., Kemp, K. C., Le, N. H., Park, S.-W., Chandra, V., Lee, J. W., & Kim, K. S. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.006 · Cited by 277
Nandi, M., Okada, K., Dutta, A., Bhaumik, A., Maruyama, J., Derks, D., & Uyama, H. (2012) · Chemical Communications · doi:10.1039/c2cc35334b · Cited by 278
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
Deng, S., Wei, H., Chen, T., Wang, B., Huang, J., & Yu, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.115 · Cited by 273
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Self-citationZeolite-templated carbons – three-dimensional microporous graphene frameworks
Nishihara, H., & Kyotani, T. (2018) · Chemical Communications · doi:10.1039/c8cc01932k · Cited by 266
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Biomass derived nitrogen and sulfur co-doped porous carbons for efficient CO2 adsorption
Ma, C., Lu, T., Shao, J., Huang, J., Hu, X., & Wang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119899 · Cited by 257
Selective adsorption of carbon dioxide by carbonized porous aromatic framework (PAF)
Ben, T., Li, Y., Zhu, L., Zhang, D., Cao, D., Xiang, Z., Yao, X., & Qiu, S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21935b · Cited by 257
A review on recent technological advancement in the activated carbon production from oil palm wastes
Rashidi, N. A., & Yusup, S. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.059 · Cited by 255
Wen, C., Liu, T., Wang, D., Wang, Y., Chen, H., Luo, G., Zhou, Z., Li, C., & Xu, M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101098 · Cited by 252
Rao, L., Liu, S., Wang, L., Ma, C., Wu, J., An, L., & Hu, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.065 · Cited by 254
Li, J., Michalkiewicz, B., Min, J., Ma, C., Chen, X., Gong, J., Mijowska, E., & Tang, T. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.204 · Cited by 250
Beyond KOH activation for the synthesis of superactivated carbons from hydrochar
Sevilla, M., Ferrero, G. A., & Fuertes, A. B. (2017) · Carbon · doi:10.1016/j.carbon.2016.12.010 · Cited by 247
Self-citationProgress of Fabrication and Applications of Electrospun Hierarchically Porous Nanofibers
Liu, R., Hou, L., Yue, G., Li, H., Zhang, J., Liu, J., Miao, B., Wang, N., Bai, J., Cui, Z., et al. (2022) · Advanced Fiber Materials · doi:10.1007/s42765-022-00132-z · Cited by 244
“Traditional solid adsorbents used for CO2 adsorption, such as silica gel and zeolites, exposed some problems for low efficiency and poor stability [126].”
BackgroundFalco, C., Marco-Lozar, J. P., Salinas-Torres, D., Morallón, E., Cazorla-Amorós, D., Titirici, M. M., & Lozano-Castelló, D. (2013) · Carbon · doi:10.1016/j.carbon.2013.06.017 · Cited by 246
“Applications of these microporous materials for supercapacitors [24], hydrogen storage [25] and CO2 capture [26] have been reported.”
BackgroundHuang, G.-G., Liu, Y.-F., Wu, X.-X., & Cai, J.-J. (2019) · New Carbon Materials · doi:10.1016/s1872-5805(19)60014-4 · Cited by 246
Ashourirad, B., Sekizkardes, A. K., Altarawneh, S., & El-Kaderi, H. M. (2015) · Chemistry of Materials · doi:10.1021/cm504435m · Cited by 245
Microwave-Assisted Rapid Synthesis of Well-Shaped MOF-74 (Ni) for CO2 Efficient Capture
Chen, C., Feng, X., Zhu, Q., Dong, R., Yang, R., Cheng, Y., & He, C. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b03271 · Cited by 242
Manyà, J. J., González, B., Azuara, M., & Arner, G. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.092 · Cited by 240
Rational design of tailored porous carbon-based materials for CO2 capture
Zhang, Z., Cano, Z. P., Luo, D., Dou, H., Yu, A., & Chen, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07297g · Cited by 238
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Multifunctional flexible membranes from sponge-like porous carbon nanofibers with high conductivity
Yan, J., Dong, K., Zhang, Y., Wang, X., Aboalhassan, A. A., Yu, J., & Ding, B. (2019) · Nature Communications · doi:10.1038/s41467-019-13430-9 · Cited by 237
Tian, W., Zhang, H., Sun, H., Suvorova, A., Saunders, M., Tade, M., & Wang, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603937 · Cited by 234
CO2 adsorption by activated templated carbons
Sevilla, M., & Fuertes, A. B. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.09.038 · Cited by 229
Self-citationNandi, R., Jha, M. K., Guchhait, S. K., Sutradhar, D., & Yadav, S. (2023) · ACS Omega · doi:10.1021/acsomega.2c06955 · Cited by 222
Wang, L., Zhang, Q., Chen, S., Xu, F., Chen, S., Jia, J., Tan, H., Hou, H., & Song, Y. (2014) · Analytical Chemistry · doi:10.1021/ac401563m · Cited by 225
Hu, X., Radosz, M., Cychosz, K. A., & Thommes, M. (2011) · Environmental Science & Technology · doi:10.1021/es200782s · Cited by 224
Tu, W., Liu, Y., Xie, Z., Chen, M., Ma, L., Du, G., & Zhu, M. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.02.133 · Cited by 223
Sevilla, M., & Fuertes, A. B. (2016) · ChemSusChem · doi:10.1002/cssc.201600426 · Cited by 219
Self-citationZhao, Y., Liu, X., Yao, K. X., Zhao, L., & Han, Y. (2012) · Chemistry of Materials · doi:10.1021/cm303072n · Cited by 221
Wang, L., & Yang, R. T. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp2100446 · Cited by 221
Abd, A. A., Othman, M. R., & Kim, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15121-9 · Cited by 216
“In CO2 adsorption at atmospheric pressure and temperature, the narrower micropore with a size less than 1 nm is suitable, since it helps in keeping the CO2 molecule into the pore wall (Chen et al. 2013) (Plaza et al. 2012) (Sevilla et al. 2012) (Sevilla and Fuertes 2011b).”
BackgroundBoyjoo, Y., Cheng, Y., Zhong, H., Tian, H., Pan, J., Pareek, V. K., Jiang, S. P., Lamonier, J.-F., Jaroniec, M., & Liu, J. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.030 · Cited by 216
Preparation of porous carbons with high low-pressure CO2 uptake by KOH activation of rice husk char
Li, D., Ma, T., Zhang, R., Tian, Y., & Qiao, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.08.027 · Cited by 214
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Choi, S. W., Tang, J., Pol, V. G., & Lee, K. B. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.12.005 · Cited by 213
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100045 · Cited by 208
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.