Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 201–300 of 1,000
Shao, J., Wang, J., Yu, Q., Yang, F., Demir, M., Altıncı, O. C., Umay, A., Wang, L., & Hu, X. D. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125891 · Cited by 132
Qian, D., Lei, C., Wang, E., Li, W., & Lu, A. (2014) · ChemSusChem · doi:10.1002/cssc.201300585 · Cited by 130
Lei, L., Cheng, Y., Chen, C., Kosari, M., Jiang, Z., & He, C. Q. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.12.163 · Cited by 140
Ma, C., Chen, X., Long, D., Wang, J., Qiao, W., & Ling, L. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.075 · Cited by 131
Chen, S., Liu, Q., He, G., Zhou, Y., Hanif, M., Peng, X., Wang, S., & Hou, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33733a · Cited by 128
Chemically activated fungi-based porous carbons for hydrogen storage
Wang, J., Senkovska, I., Kaskel, S., & Liu, Q. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.016 · Cited by 131
Carbon materials as CO2 adsorbents: a review
Sharma, A., Jindal, J., Mittal, A. K., Kumari, K., Maken, S., & Kumar, N. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01153-z · Cited by 146
Ravi, S., & Vadukumpully, S. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.11.026 · Cited by 136
Zhang, Y., Zhang, Y., Wang, X., Yu, J., & Ding, B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14197 · Cited by 128
Superior CO2 uptake on nitrogen doped carbonaceous adsorbents from commercial phenolic resin
Liu, S., Rao, L., Yang, P., Wang, X., Wang, L., Ma, R., Yue, L., & Hu, X. (2020) · Journal of Environmental Sciences · doi:10.1016/j.jes.2020.04.006 · Cited by 126
Three-Dimensional Graphene-Based Porous Adsorbents for Postcombustion CO2 Capture
Chowdhury, S., & Balasubramanian, R. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04052 · Cited by 133
Efficient CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from d-Glucose
Yue, L., Rao, L., Wang, L., An, L., Hou, C., Ma, C., DaCosta, H., & Hu, X. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01028 · Cited by 126
Management of surgical mask waste to activated carbons for CO2 capture
Serafin, J., Sreńscek-Nazzal, J., Kamińska, A., Paszkiewicz, O., & Michalkiewicz, B. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101970 · Cited by 124
Biochar as a renewable source for high-performance CO2 sorbent
Li, Y., Ruan, G., Jalilov, A. S., Tarkunde, Y. R., Fei, H., & Tour, J. M. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.010 · Cited by 132
Chen, C., Huang, H., Yu, Y., Shi, J., He, C. Q., Albilali, R., & Pan, H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.161 · Cited by 129
Chen, H., Guo, Y., Xu, L. H., Xu, X., Su, C., Zeng, Z., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128824 · Cited by 128
Recent advances in biomass based activated carbon for carbon dioxide capture – A review
Azmi, N. Z. M., Buthiyappan, A., Raman, A. A. A., Patah, M. F. A., & Sufian, S. B. (2022) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2022.08.021 · Cited by 146
Li, Z., Wu, D., Huang, X. W., Ma, J., Liu, H., Liang, Y., Fu, R., & Matyjaszewski, K. A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00941j · Cited by 125
Polyimine Container Molecules and Nanocapsules
Rue, N. M., Sun, J., & Warmuth, R. (2011) · Israel Journal of Chemistry · doi:10.1002/ijch.201100064 · Cited by 134
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Designed porous carbon materials for efficient CO2 adsorption and separation
Zhang, X.-Q., Li, W., & Lu, A. (2015) · New Carbon Materials · doi:10.1016/s1872-5805(15)60203-7 · Cited by 139
Shi, Y., Zhang, X., & Liu, G. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00670 · Cited by 125
Biochar as environmental armour and its diverse role towards protecting soil, water and air
Kumar, A., Singh, E., Mishra, R., & Kumar, S. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.150444 · Cited by 129
Heteroatom-Doped Carbon Materials for Multifunctional Noncatalytic Applications
Zhi, S., Dai, Q., Wang, H., Wu, D. O., Zhao, L., Hu, C., & Dai, L. (2025) · ACS Nano · doi:10.1021/acsnano.5c04478 · Cited by 140
Fuertes, A. B., & Sevilla, M. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.028 · Cited by 127
Self-citationSustainable packaging waste-derived activated carbon for carbon dioxide capture
Idrees, M., Rangari, V., & Jeelani, S. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.05.016 · Cited by 119
Hirst, E. A., Taylor, A., & Mokaya, R. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04409k · Cited by 117
Designing Carbon‐Based Porous Materials for Carbon Dioxide Capture
Singh, R., Wang, L., Ostrikov, K., & Huang, J. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202202290 · Cited by 125
Yang, P., Rao, L., Zhu, W., Wang, L., Ma, R., Chen, F., Lin, G., & Hu, X. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00073 · Cited by 117
Li, Q., Lu, T., Wang, L., Pang, R., Shao, J., Liu, L., & Hu, X. D. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119204 · Cited by 119
Ma, X., Xu, W., Su, R., Shao, L., Zeng, Z., Li, L., & Wang, H. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122521 · Cited by 124
N-doped porous carbon derived from macadamia nut shell for CO2 adsorption
Bai, J., Huang, J., Yu, Q., Demir, M., Kılıç, M., Altay, B. N., Hu, X. D., & Wang, L. (2023) · Fuel Processing Technology · doi:10.1016/j.fuproc.2023.107854 · Cited by 114
Catalytic upgrading of bio‐oils by esterification
Ciddor, L., Bennett, J. A., Hunns, J. A., Wilson, K., & Lee, A. F. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4662 · Cited by 124
Bifunctional HNO3 catalytic synthesis of N-doped porous carbons for CO2capture
Ma, X., Cao, M., & Hu, C. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00104g · Cited by 116
Porous carbons derived from polyethylene terephthalate (PET) waste for CO2 capture studies
Kaur, B., Singh, J., Gupta, R. K., & Bhunia, H. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.04.077 · Cited by 116
Nitrogen-Doped Porous Carbons from Lotus Leaf for CO2 Capture and Supercapacitor Electrodes
Liu, S., Yang, P., Wang, L., Li, Y., Wu, Z., Ma, R., Wu, J., & Hu, X. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00886 · Cited by 116
Adeniran, B., & Mokaya, R. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.06.022 · Cited by 125
Liu, Z., Du, Z., Song, H., Wang, C., Subhan, F., Xing, W., & Yan, Z. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.10.061 · Cited by 121
Kou, J., & Sun, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07305k · Cited by 118
Talapaneni, S. N., Lee, J. H., Je, S. H., Büyükçakır, O., Kwon, T., Polychronopoulou, K., Choi, J. W., & Coşkun, A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604658 · Cited by 121
Madhu, R., Veeramani, V., & Chen, S. (2014) · Scientific Reports · doi:10.1038/srep04679 · Cited by 115
Gong, Y., Wang, H., Wei, Z., Xie, L., & Wang, Y. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500447j · Cited by 120
Nitrogen-doped porous carbons from polyacrylonitrile fiber as effective CO2 adsorbents
Ma, C., Bai, J., Hu, X., Jiang, Z., & Wang, L. (2023) · Journal of Environmental Sciences · doi:10.1016/j.jes.2022.03.016 · Cited by 114
Mukhtar, A., Saqib, S., Mellon, N. B., Babar, M., Rafiq, S., Ullah, S., Bustam, M. A., Al-Sehemi, A. G., Muhammad, N., & Chawla, M. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2020.103203 · Cited by 116
Nazir, G., Rehman, A., Hussain, S., Mahmood, Q., Fteiti, M. A., Heo, K., Ikram, M., & Din, M. A. U. (2023) · Green Chemistry · doi:10.1039/d3gc00636k · Cited by 119
Guo, L., Yang, J., Hu, G., Hu, X., Wang, L., Dong, Y., DaCosta, H., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00327 · Cited by 112
Photocatalytic degradation of orange G dye using ZnO/biomass activated carbon nanocomposite
Vinayagam, M., Ramachandran, S., Ramya, V., & Sivasamy, A. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.06.005 · Cited by 112
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite
Liu, Q., He, P., Qian, X., Fei, Z., Zhang, Z., Chen, X., Tang, J., Cui, M., Qiao, X., & Shi, Y. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b02543 · Cited by 110
Rouzitalab, Z., Mohammady Maklavany, D., Rashidi, A., & Jafarinejad, S. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.10.035 · Cited by 109
Mestre, A. S., Freire, C., Pires, J., Carvalho, A. P., & Pinto, M. L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03242j · Cited by 108
Zubbri, N. A., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105074 · Cited by 106
Ahmed, D. S., El-Hiti, G. A.-R., Yousif, E. A., Ali, A. A., & Hameed, A. S. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1474-x · Cited by 113
“which exhibit high adsorption performance at low pressure with adsorption occurring via pore filling [120].”
BackgroundEL-Mahdy, A. F. M., Liu, T.-E., & Kuo, S.-W. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122163 · Cited by 106
Zhu, X., Hillesheim, P. C., Mahurin, S. M., Wang, C., Tian, C., Brown, S., Luo, H., Veith, G. M., Han, K. S., Hagaman, E. W., et al. (2012) · ChemSusChem · doi:10.1002/cssc.201200355 · Cited by 105
Carbon‐based adsorbents for post‐combustion capture: a review
Zhao, H., Luo, X., Zhang, H., Sun, N., Wei, W., & Sun, Y. (2018) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1758 · Cited by 104
Rehman, A., & Park, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.046 · Cited by 107
Adeniran, B., & Mokaya, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06539e · Cited by 105
Porous carbon based on polyvinylidene fluoride: Enhancement of CO2 adsorption by physical activation
Hong, S. M., Choi, S. W., Kim, S. H., & Lee, K. B. (2015) · Carbon · doi:10.1016/j.carbon.2015.12.012 · Cited by 107
Liu, F., Yu, R., Ji, X., & Guo, M. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.05.019 · Cited by 104
Liu, Y., Wang, X., & Cao, M. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.07.019 · Cited by 108
Singh, G., Ismail, I. S., Bilen, C., Shanbhag, D., Sathish, C. I., Ramadass, K., & Vinu, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113831 · Cited by 103
Beda, A., Vaulot, C., & Ghimbeu, C. M. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta10088a · Cited by 109
Enhanced CO2/N2 selectivity in amidoxime-modified porous carbon
Mahurin, S. M., Górka, J., Nelson, K. M., Mayes, R. T., & Dai, S. (2013) · Carbon · doi:10.1016/j.carbon.2013.10.018 · Cited by 114
“can be tuned through appropriate synthesis parameters, or the addition of surface functionality [7,8].”
BackgroundInfluentialSivadas, D. L., Vijayan, S., Rajeev, R., Ninan, K. N., & Prabhakaran, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.057 · Cited by 111
Mane, S. T., Gao, Z., Li, Y., Xue, D., Liu, X., & Sun, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07188d · Cited by 104
One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption
Bai, J., Huang, J., Yu, Q., Demir, M., Geçit, F. H., Altay, B. N., Wang, L., & Hu, X. D. (2023) · Fuel Processing Technology · doi:10.1016/j.fuproc.2023.107700 · Cited by 101
Sulfur-Enriched Nanoporous Carbon: A Novel Approach to CO 2 Adsorption
Liu, C., Zhi, Y., Yu, Q., Tian, L., Demir, M., Çolak, S. G., Farghaly, A. A., Wang, L., & Hu, X. D. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c06239 · Cited by 104
Lu, X., & Berge, N. D. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.05.015 · Cited by 115
“…53 54 55 56 57 58 59 60 61 62 63 64 2 1.0 Introduction 39 Hydrothermal carbonization (HTC) has been extensively studied as a beneficial technique 40 for biomass and waste conversion to value-added products (e.g., Berge et al., 2011; Lu et al., 41 2013; Kang et al., 2012; Sevilla and Fuertes, 2011).”
BackgroundInfluentialThe role of different properties of activated carbon in CO2 adsorption
Yin, G., Liu, Z., Liu, Q., & Wu, W. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.085 · Cited by 102
Vu, A., Ho, K., Jin, S., & Lee, C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.01.080 · Cited by 102
Sun, F., Gao, J., Yang, Y., Zhu, Y., Wang, L., Pi, X., Liu, X., Qu, Z., Wu, S., & Qin, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.076 · Cited by 103
Iron-modified rice husk hydrochar and its immobilization effect for Pb and Sb in contaminated soil
Teng, F., Zhang, Y., Wang, D., Shen, M., & Hu, D. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122977 · Cited by 106
Li, Z., Wang, Q., Zhou, Z., Zhao, S., Zhong, S., Xu, L., Gao, Y., & Cui, X. (2021) · Microchemical Journal · doi:10.1016/j.microc.2021.106250 · Cited by 106
Zhou, S., Strømme, M., & Xu, C. (2019) · Chemistry - A European Journal · doi:10.1002/chem.201806417 · Cited by 104
Heo, Y., & Park, S. (2015) · Energy · doi:10.1016/j.energy.2015.08.033 · Cited by 106
Madhu, R., Veeramani, V., Chen, S., Veerakumar, P., Liu, S.-B., & Miyamoto, N. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp01285j · Cited by 101
Zhou, Y., Tan, P., He, Z., Zhang, C., Fang, Q., & Chen, G. (2021) · Fuel · doi:10.1016/j.fuel.2021.122507 · Cited by 107
Yuan, X., Wang, J., Deng, S., Suvarna, M., Wang, X., Zhang, W., Hamilton, S. T., Alahmed, A. H., Jamal, A., Park, A. A., et al. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112413 · Cited by 104
Superior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99
Biomass ash stabilized MgO adsorbents for CO2 capture application
Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2020) · Fuel · doi:10.1016/j.fuel.2019.116298 · Cited by 99
Hydrothermal Carbonization of Biomass: A Review
Krylova, A. Y., & Zaitchenko, V. M. (2018) · Solid Fuel Chemistry · doi:10.3103/s0361521918020076 · Cited by 98
Hu, X., Wang, H., Faul, C. F. J., Wen, J., Wei, Y., Zhu, M., & Liao, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122998 · Cited by 98
Magnetic activated carbon prepared from rice straw-derived hydrochar for triclosan removal
Liu, Y., Zhu, X., Qian, F., Zhang, S., & Chen, J. (2014) · RSC Adv. · doi:10.1039/c4ra11815d · Cited by 98
Jin, Y., Hawkins, S. C., Huynh, C., & Su, S. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24441e · Cited by 102
Han, J., Kwon, J. H., Lee, J., Lee, J. H., & Roh, K. C. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.076 · Cited by 100
Highly Efficient Nitrogen-Doped Porous Carbonaceous CO2 Adsorbents Derived from Biomass
Pang, R., Lu, T., Shao, J., Wang, L., Wu, X., Qian, X., & Hu, X. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03832 · Cited by 97
Yang, M., Guo, L., Hu, G., Hu, X., Chen, J., Shen, S., Dai, W., & Fan, M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04038 · Cited by 96
Evidence for CO2 reactive adsorption on nanoporous S- and N-doped carbon at ambient conditions
Bandosz, T. J., Seredych, M., Rodríguez-Castellón, E., Cheng, Y. Q., Daemen, L. L., & Ramirez-Cuesta, A. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.007 · Cited by 100
Yuan, X., Dissanayake, P. D., Gao, B., Liu, W., Lee, K. B., & Ok, Y. S. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113128 · Cited by 104
Mashhadimoslem, H., Vafaeinia, M., Khosrowshahi, M. S., Ghaemi, A., Fathalian, F., & Maleki, A. R. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02754 · Cited by 99
Xiao, J., Wang, Y., Zhang, T. C., Ouyang, L., & Yuan, S. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230727 · Cited by 97
Hamza, U. D., Nasri, N. S., Amin, N. S., Mohammed, J., & Zain, H. M. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1042068 · Cited by 95
Polyurethane Foam-Based Ultramicroporous Carbons for CO2 Capture
Ge, C., Song, J., Qin, Z., Wang, J., & Fan, W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04771 · Cited by 94
Zhang, X., Wu, J., Yang, H., Shao, J., Wang, X., Chen, Y., Zhang, S., & Chen, H. (2016) · RSC Advances · doi:10.1039/c6ra23748g · Cited by 95
Wu, Y., Zhang, Y., Chen, N., Dai, S., Hua, J., & Wang, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.017 · Cited by 98
Jang, E., Choi, S. W., & Lee, K. B. (2019) · Fuel · doi:10.1016/j.fuel.2019.03.051 · Cited by 95
Design and Fabrication of Hierarchically Porous Carbon with a Template-free Method
Gong, Y., Wei, Z., Wang, J., Zhang, P., Li, H., & Wang, Y. (2014) · Scientific Reports · doi:10.1038/srep06349 · Cited by 103
Son, B. T., Long, N. V., & Hang, N. T. N. (2021) · RSC Advances · doi:10.1039/d1ra05079f · Cited by 105
Gopalan, J., Buthiyappan, A., & Raman, A. A. A. (2022) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2022.06.026 · Cited by 103
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.