Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 101–200 of 1,000
Hydrothermal Carbonization: Modeling, Final Properties Design and Applications: A Review
Román, S., Libra, J., Berge, N., Sabio, E., Ro, K., Li, L., Ledesma, B., Álvarez, A., & Bae, S. (2018) · Energies · doi:10.3390/en11010216 · Cited by 209
Polyethyleneimine–nano silica composites: a low-cost and promising adsorbent for CO2 capture
Li, K., Jiang, J., Tian, S., Yan, F., & Chen, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04275a · Cited by 207
Nitrogen-doped porous carbon nanofiber webs for efficient CO2 capture and conversion
Li, Y., Zou, B., Hu, C., & Cao, M. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.074 · Cited by 205
Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11995e · Cited by 201
Jain, A., Xu, C., Jayaraman, S., Balasubramanian, R., Lee, J. Y., & Srinivasan, M. P. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.06.041 · Cited by 201
Ma, C., Bai, J., Demir, M., Hu, X., Liu, S., & Wang, L. (2022) · Fuel · doi:10.1016/j.fuel.2022.125119 · Cited by 198
Coconut shell-based microporous carbons for CO2 capture
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.07.008 · Cited by 197
Li, M., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.015 · Cited by 198
Kim, M.-J., Choi, S. W., Kim, H., Mun, S., & Lee, K. B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125404 · Cited by 197
Zhuo, H., Hu, Y., Tong, X., Zhong, L., Peng, X., & Sun, R. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.04.041 · Cited by 196
Tasca, A. L., Puccini, M., Gori, R., Corsi, I., Galletti, A. M. R., & Vitolo, S. (2019) · Waste Management · doi:10.1016/j.wasman.2019.05.027 · Cited by 194
Gutiérrez, M. C., Carriazo, D., Ania, C. O., Parra, J. B., Ferrer, M. L., & del Monte, F. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01463c · Cited by 195
Liu, R., Shi, X., Wang, C., Gao, Y., Xu, S., Hao, G., Chen, S., & Lu, A. (2021) · ChemSusChem · doi:10.1002/cssc.202002677 · Cited by 194
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Yang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Falco, C., Sieben, J. M., Brun, N., Sevilla, M., van der Mauelen, T., Morallón, E., Cazorla‐Amorós, D., & Titirici, M. (2013) · ChemSusChem · doi:10.1002/cssc.201200817 · Cited by 192
Self-citationNitrogen enriched porous carbons from d-glucose with excellent CO2 capture performance
Rao, L., Ma, R., Liu, S., Wang, L., Wu, Z., Yang, J., & Hu, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.093 · Cited by 193
Alhwaige, A. A., Ishida, H., & Qutubuddin, S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01323 · Cited by 192
Hydrothermal synthesis of microalgae-derived microporous carbons for electrochemical capacitors
Sevilla, M., Gu, W., Falco, C., Titirici, M. M., Fuertes, A. B., & Yushin, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.046 · Cited by 190
Self-citationShafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.111 · Cited by 185
“Many studies have explored the use of agricultural wastes such as coconut shells, coffee beans, sugar cane bagasse, oil-palm stone to produce activated carbons [27–38].”
BackgroundMethodNovel porous carbon materials with ultrahigh nitrogen contents for selective CO2 capture
Zhao, Y., Zhao, L., Yao, K. X., Yang, Y., Zhang, Q., & Han, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33091a · Cited by 184
Liu, X., Ma, C., Li, J., Zielinska, B., Kalenczuk, R. J., Chen, X., Chu, P. K., Tang, T., & Mijowska, E. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.032 · Cited by 182
Activated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
Porous carbon nanosheets with precisely tunable thickness and selective CO2 adsorption properties
Hao, G.-P., Jin, Z.-Y., Sun, Q., Zhang, X.-Q., Zhang, J.-T., & Lu, A.-H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41906a · Cited by 180
Carbon doping of hexagonal boron nitride porous materials toward CO2 capture
Chen, S., Li, P., Xu, S., Pan, X., Fu, Q., & Bao, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08515j · Cited by 178
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Bai, R., Yang, M., Hu, G., Xu, L., Hu, X., Li, Z., Wang, S., Dai, W., & Fan, M. (2015) · Carbon · doi:10.1016/j.carbon.2014.09.079 · Cited by 177
Biobased chitosan hybrid aerogels with superior adsorption: Role of graphene oxide in CO2 capture
Alhwaige, A. A., Agag, T., Ishida, H., & Qutubuddin, S. (2013) · RSC Advances · doi:10.1039/c3ra42022a · Cited by 177
CO2 Capture in the Sustainable Wheat-Derived Activated Microporous Carbon Compartments
Hong, S.-M., Jang, E., Dysart, A. D., Pol, V. G., & Lee, K. B. (2016) · Scientific Reports · doi:10.1038/srep34590 · Cited by 177
Valorisation of food waste via hydrothermal carbonisation and techno-economic feasibility assessment
Saqib, N. U., Sharma, H. B., Baroutian, S., Dubey, B., & Sarmah, A. K. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.06.484 · Cited by 177
Akhtar, F., Liu, Q., Hedin, N., & Bergström, L. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21153j · Cited by 174
Novel Nitrogen-Doped Porous Carbons Derived from Graphene for Effective CO2 Capture
An, L., Liu, S., Wang, L., Wu, J., Wu, Z., Ma, C., Yu, Q., & Hu, X. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b06122 · Cited by 173
Hydrothermal synthesis and applications of advanced carbonaceous materials from biomass: a review
Wang, Y., Hu, Y.-J., Hao, X., Peng, P., Shi, J.-Y., Peng, F., & Sun, R.-C. (2020) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-020-00158-0 · Cited by 174
Sevilla, M., & Fuertes, A. B. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13149a · Cited by 173
Self-citationUltraviolet photocatalytic degradation of methyl orange by nanostructured TiO2/ZnO heterojunctions
Zha, R., Nadimicherla, R., & Guo, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00764j · Cited by 173
Wang, L., Rao, L., Xia, B., Wang, L., Yue, L., Liang, Y., DaCosta, H., & Hu, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.003 · Cited by 172
Valorization of coffee grounds to biochar-derived adsorbents for CO2 adsorption
Liu, S.-H., & Huang, Y.-Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.076 · Cited by 169
Samanta, S., & Srivastava, R. (2020) · Materials Advances · doi:10.1039/d0ma00293c · Cited by 170
Surface modifications of carbonaceous materials for carbon dioxide adsorption: A review
Chiang, Y.-C., & Juang, R.-S. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.12.014 · Cited by 166
Nitrogen‐doping activated biomass carbon from tea seed shell for CO 2 capture and supercapacitor
Quan, C., Jia, X., & Gao, N. (2020) · International Journal of Energy Research · doi:10.1002/er.5017 · Cited by 167
Activated carbons and amine-modified materials for carbon dioxide capture — a review
Chen, Z., Deng, S., Wei, H., Wang, B., Huang, J., & Yu, G. (2013) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-013-0510-7 · Cited by 167
“Sevilla and Fuertes used the eucalyptus sawdust as precursor and KOH as activating agent to prepare a series of AC at different KOH/C ratios and activating temperature [35], and the highest CO2 adsorbed amount reached 6.”
MethodDevelopment of microporous carbons for CO2 capture by KOH activation of African palm shells
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.07.003 · Cited by 165
Fabrication of porous carbon monoliths with a graphitic framework
Sevilla, M., & Fuertes, A. B. (2013) · Carbon · doi:10.1016/j.carbon.2012.12.090 · Cited by 165
“The design and fabrication of porous carbons with appropriate structural and chemical properties has recently generated a great deal of interest because of their applicability in numerous fields such as: (i) the storage of electrical energy in supercapacitors [1], (ii) the immobilization and separation of large biomol…”
BackgroundSelf-citationRecent advances in functionalized composite solid materials for carbon dioxide capture
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.02.053 · Cited by 165
Mesoporous Chitosan–SiO2 Nanoparticles: Synthesis, Characterization, and CO2 Adsorption Capacity
Rafigh, S. M., & Heydarinasab, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02388 · Cited by 164
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400059t · Cited by 163
Ma, X., Su, C., Liu, B., Wu, Q., Zhou, K., Zeng, Z., & Li, L. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118065 · Cited by 162
Mulu, E., M'Arimi, M. M., & Ramkat, R. C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111081 · Cited by 163
Wu, Z., Webley, P. A., & Zhao, D. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm16183d · Cited by 162
Zhu, X., Liu, Y., Qian, F., Zhou, C., Zhang, S., & Chen, J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00153 · Cited by 162
Chang, B., Shi, W., Yin, H., Zhang, S., & Yang, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.142 · Cited by 161
Biomass to porous carbon in one step: directly activated biomass for high performance CO 2 storage
Balahmar, N., Al-Jumialy, A. S., & Mokaya, R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01722g · Cited by 160
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
“pared with petroleum coke, sawdust, bamboo, celtuce leaves, polypyrrole and polyacrylonitrile fiber have high adsorption capacity for CO2 (Hu et al. 2011; Nandi et al. 2012; Sevilla and Fuertes 2011; Wei et al. 2012; Wang et al. 2012; Saleh et al. 2013).”
BackgroundInfluentialWang, Y., Yang, R., Li, M., & Zhao, Z. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.008 · Cited by 158
Pine cone shell-based activated carbon used for CO2 adsorption
Li, K., Tian, S., Jiang, J., Wang, J., Chen, X., & Yan, F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09908k · Cited by 156
Assessment of porous carbons derived from sustainable palm solid waste for carbon dioxide capture
Nasri, N. S., Hamza, U. D., Ismail, S. N., Ahmed, M. M., & Mohsin, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.053 · Cited by 157
“, 2012), saw dust (Servilla and Fuertes, 2011), saw dust, bamboo (Boonpoke et al.”
InfluentialWang, J., Wang, Y., Hu, H., Yang, Q., & Cai, J. (2020) · Nanoscale · doi:10.1039/c9nr09697c · Cited by 160
Improving Hydrothermal Carbonization by Using Poly(ionic liquid)s
Zhang, P., Yuan, J., Fellinger, T., Antonietti, M., Li, H., & Wang, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301069 · Cited by 162
Shafeeyan, M. S., Daud, W. M. A. W., Shamiri, A., & Aghamohammadi, N. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00653 · Cited by 155
Sharma, T., Sharma, S., Kamyab, H., & Kumar, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119138 · Cited by 157
Carbonaceous materials as adsorbents for CO2 capture: synthesis and modification
Gao, X., Yang, S., Hu, L., Cai, S., Wu, L., & Kawi, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100039 · Cited by 151
Liao, Y., Cheng, Z., Zuo, W., Thomas, A., & Faul, C. F. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09553 · Cited by 152
“…as 33.6, 31.6, and 31.0 kJ mol -1 for NCMP1 , NCMP2 , and NCMP3 , respectively, which are higher than those values reported for many other porous organic/inorganic adsorbents such as microporous polymer networks (15.6-29.8 kJ mol -1 ), 52 MOFs (15-30 kJ mol -1 ), 53 and carbons (20 kJ mol -1 ) 54 .”
BackgroundInfluentialWater caltrop shell-derived nitrogen-doped porous carbons with high CO2 adsorption capacity
Zhao, Z., Ma, C., Chen, F., Xu, G., Pang, R., Qian, X., Shao, J., & Hu, X. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2021.105969 · Cited by 153
Hu, Y., Tong, X., Zhuo, H., Zhong, L., Peng, X., Wang, S., & Sun, R. (2016) · RSC Advances · doi:10.1039/c6ra00822d · Cited by 151
Covalent triazine frameworks for carbon dioxide capture
Wang, H., Jiang, D., Huang, D., Zeng, G., Xu, P., Lai, C., Chen, M., Cheng, M., Zhang, C., & Wang, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06847c · Cited by 151
Effect of deashing on activation process and lead adsorption capacities of sludge-based biochar
Zhang, J., Shao, J., Jin, Q., Zhang, X., Yang, H., Chen, Y., Zhang, S., & Chen, H. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137016 · Cited by 151
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X., Wang, L., Zhao, Y., Lin, Y., Sun, Y., DaCosta, H., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 150
Gou, G., Huang, F., Jiang, M., Li, J., & Zhou, Z. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.11.150 · Cited by 150
Ma, X., Yang, Y., Wu, Q., Liu, B., Li, D., Chen, R., Wang, C., Li, H., Zeng, Z., & Li, L. (2020) · Fuel · doi:10.1016/j.fuel.2020.118727 · Cited by 146
A novel activating strategy to achieve highly porous carbon monoliths for CO2 capture
Ma, X., Li, Y., Cao, M., & Hu, C. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14684g · Cited by 146
Kabakcı, S. B., & Baran, S. S. (2019) · Waste Management · doi:10.1016/j.wasman.2019.09.021 · Cited by 156
Modak, A., Pramanik, M., Inagaki, S., & Bhaumik, A. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02150a · Cited by 144
Efficient nitrogen doped porous carbonaceous CO2 adsorbents based on lotus leaf
Li, Q., Liu, S., Wang, L., Chen, F., Shao, J., & Hu, X. (2021) · Journal of Environmental Sciences · doi:10.1016/j.jes.2020.11.008 · Cited by 145
Kancharlapalli, S., Gopalan, A., Harańczyk, M., & Snurr, R. Q. (2021) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.0c01229 · Cited by 156
Lü, J., & Cao, R. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602116 · Cited by 144
Enhancement of CO2 adsorption on phenolic resin-based mesoporous carbons by KOH activation
de Souza, L. K. C., Wickramaratne, N. P., Ello, A. S., Costa, M. J. F., da Costa, C. E. F., & Jaroniec, M. (2013) · Carbon · doi:10.1016/j.carbon.2013.08.034 · Cited by 149
“[26,27] and others [28–30], indicating that ultramicropores (micropores below 0.”
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Seredych, M., Jagiełło, J., & Bandosz, T. J. (2014) · Carbon · doi:10.1016/j.carbon.2014.03.024 · Cited by 144
Sulfur-Doped porous carbon Adsorbent: A promising solution for effective and selective CO2 capture
Bai, J., Shao, J., Yu, Q., Demir, M., Altay, B. N., Ali, T. M., Jiang, Y., Wang, L., & Hu, X. D. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147667 · Cited by 142
Recent Progress of the Preparation and Application of Electrospun Porous Nanofibers
Wang, P., Lv, H., Cao, X., Liu, Y., & Yu, D.-G. (2023) · Polymers · doi:10.3390/polym15040921 · Cited by 140
State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials
Ochedi, F. O., Liu, Y., & Adewuyi, Y. G. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.03.036 · Cited by 140
Sun, H., La, P., Yang, R., Zhu, Z., Liang, W., Yang, B., Li, A., & Deng, W. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.09.015 · Cited by 142
Khan, M. A., Alqadami, A. A., Otero, M., Siddiqui, M. R., ALOthman, Z. A., Alsohaimi, I. H., Rafatullah, M., & Hamedelniel, A. E. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.11.210 · Cited by 144
Kumar, K. V., Preuss, K., Lu, L., Guo, Z. X., & Titirici, M. M. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06017 · Cited by 135
Luo, Y. H., Zhang, F., Li, C., & Cai, J. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2021.103929 · Cited by 141
Hydrothermal pre-treatment for mesoporous carbon synthesis: enhancement of chemical activation
Jain, A., Jayaraman, S., Balasubramanian, R., & Srinivasan, M. P. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta12648j · Cited by 136
Development of a cost-effective CO2 adsorbent from petroleum coke via KOH activation
Jang, E., Choi, S. W., Hong, S. M., Shin, S., & Lee, K. B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.08.075 · Cited by 142
Ma, X., Li, L., Zeng, Z., Chen, R., Wang, C., Zhou, K. C., & Li, H. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.03.162 · Cited by 135
Microporous carbonaceous adsorbents for CO 2 separation via selective adsorption
Zhao, Y., Liu, X., & Han, Y. (2015) · RSC Advances · doi:10.1039/c5ra00569h · Cited by 147
Potassium salt-assisted synthesis of highly microporous carbon spheres for CO2 adsorption
Ludwinowicz, J., & Jaroniec, M. (2014) · Carbon · doi:10.1016/j.carbon.2014.10.074 · Cited by 136
Liu, L., Deng, Q.-F., Hou, X.-X., & Yuan, Z.-Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31441j · Cited by 134
In-situ ion-activated carbon nanospheres with tunable ultramicroporosity for superior CO2 capture
Zhang, Z., Luo, D., Lui, G., Li, G., Jiang, G., Cano, Z. P., Deng, Y., Du, X., Song, Y., Chen, Y., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.10.096 · Cited by 138
Liu, X., Sun, C., Liu, H., Tan, W. H., Wang, W., & Snape, C. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.062 · Cited by 132
Liu, S., Ma, R., Hu, X., Wang, L., Wang, X., Radosz, M., & Fan, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 133
Robertson, C., & Mokaya, R. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.05.025 · Cited by 135
Ren, M., Jia, Z., Tian, Z., López, D., Cai, J., Titirici, M., & Jorge, A. B. (2018) · ChemElectroChem · doi:10.1002/celc.201800603 · Cited by 135
Dilokekunakul, W., Teerachawanwong, P., Klomkliang, N., Supasitmongkol, S., & Chaemchuen, S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124413 · Cited by 129
Shi, N., Liu, Q., He, X., Gui, W., Chen, N., Peng, J., & Ma, L. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b02174 · Cited by 134
Ismail, I. S., Singh, G., Smith, P., Kim, S., Yang, J.-H., Joseph, S., Yusup, S., Singh, M., Bansal, V., Talapaneni, S. N., et al. (2020) · Carbon · doi:10.1016/j.carbon.2020.01.008 · Cited by 131
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.