Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 601–700 of 1,000
Polyacrylonitrile-Derived N-Doped Nanoporous Carbon Fibers for CO 2 Adsorption
Ma, C., Lu, T., Demir, M., Yu, Q., Hu, X. D., Jiang, W., & Wang, L. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c03126 · Cited by 37
Wu, Q., Li, W. H., Tan, J., Nan, X., & Liu, S. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.195 · Cited by 36
Wang, J., Yao, L., Ma, C., Guo, X., Qiao, W., Ling, L., & Long, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11178 · Cited by 38
Luo, H., Zhu, C., Tan, Z. C., Bao, L., Wang, J., Miao, G., Kong, L., & Sun, Y. H. (2016) · RSC Advances · doi:10.1039/c6ra04106j · Cited by 37
Han, J., Lee, K., Choi, M. S., Park, H. S., Kim, W., & Roh, K. C. (2019) · Carbon letters · doi:10.1007/s42823-019-00018-y · Cited by 35
Garg, S., & Das, P. (2019) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-019-00506-1 · Cited by 36
Hou, Z.-Q., Tao, Y., Bai, T., Liang, Y., Huang, S., & Cai, J. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.105757 · Cited by 37
Biochar for sustainable construction industry
Li, H., Wang, L., Zhang, Y., Yang, J., Tsang, D. C. W., & Mechtcherine, V. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91873-2.00015-7 · Cited by 48
Munusamy, K., Somani, R. S., & Bajaj, H. C. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.05.010 · Cited by 39
Shahkarami, S., Dalai, A. K., Soltan, J., Hu, Y., & Wang, D. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00470 · Cited by 35
Zhang, E., Hao, G., Casco, M. E., Bon, V., Grätz, S., & Borchardt, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta10783h · Cited by 35
Nanoporous Carbon Synthesis: An Old Story with Exciting New Chapters
Mestre, A. S., & Carvalho, A. P. (2018) · InTech eBooks · doi:10.5772/intechopen.72476 · Cited by 45
“Starch, cellulose, sawdust 1260–2850 [71]”
García-Díez, E., Schaefer, S., Sánchez-Sánchez, Á., Celzard, A., Fierro, V., Maroto‐Valer, M. M., & García, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13247 · Cited by 37
Challenges and opportunities of hydrothermal carbonisation in the UK; case study in Chirnside
Bevan, E., Fu, J., & Zheng, Y. (2020) · RSC Advances · doi:10.1039/d0ra04607h · Cited by 43
Retracteddos Santos, T. C., & Ronconi, C. M. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.05.018 · Cited by 37
Wu, S., Wang, Q., Luk, H. M., Wu, D., Lu, Q., Pan, S., Bai, J., Cui, D., & Zhang, X. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.122142 · Cited by 38
Tong, X., Zhuo, H., Wang, S., Zhong, L., Hu, Y., Peng, X., Zhou, W., & Sun, R. (2016) · RSC Advances · doi:10.1039/c6ra01565d · Cited by 33
Pan, Z., Dong, L., Lv, W. Z., Zheng, D., Li, Z., Luo, C., Zheng, C., Yang, Q., & Kang, F. (2017) · Chemistry - An Asian Journal · doi:10.1002/asia.201601724 · Cited by 34
Nitrogen-Doped Coal Tar Pitch Based Microporous Carbons with Superior CO2 Capture Performance
Yu, D., Hu, J., Zhou, L., Li, J., Tang, J., Peng, C., & Liu, H. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b00125 · Cited by 34
Far, H. M., Rewatkar, P. M., Donthula, S., Taghvaee, T., Saeed, A. M., Sotiriou‐Leventis, C., & Leventis, N. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800333 · Cited by 34
Zhou, Y., Luo, L., Wen, Y. F., Li, Z., Fan, M., Du, G., & Zhao, W. (2022) · Energy · doi:10.1016/j.energy.2022.123367 · Cited by 36
Challenges and opportunities of hydrothermal carbonisation in the UK; case study in Chirnside
Bevan, E., Fu, J., Luberti, M., & Zheng, Y. (2021) · RSC Advances · doi:10.1039/d1ra06736b · Cited by 37
Improving Hydrothermal Carbonization by Using Poly(ionic liquid)s
Zhang, P., Yuan, J., Fellinger, T., Antonietti, M., Li, H., & Wang, Y. (2013) · Angewandte Chemie · doi:10.1002/ange.201301069 · Cited by 34
Carbon particle induced foaming of molten sucrose for the preparation of carbon foams
Narasimman, R., Vijayan, S., & Prabhakaran, K. (2014) · Materials Science and Engineering B · doi:10.1016/j.mseb.2014.08.007 · Cited by 35
CO2 adsorption in hydrochar produced from waste biomass
Fagnani, H. M. C., da Silva, C. T. P., Pereira, M. M., Rinaldi, A. W., Arroyo, P. A., & de Barros, M. A. S. D. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1055-6 · Cited by 33
“This fact is in agreement with results already reported by [31, 32].”
ResultYahia, E. H., Serafin, J., Román-Martínez, M. C., Sreńscek-Nazzal, J., Dziejarski, B., Saidi, M., & Ouzzine, M. (2025) · Fuel · doi:10.1016/j.fuel.2025.134922 · Cited by 39
Cellulose generated-microporous carbon nanosheets with nitrogen doping
Shen, W., Hu, T., & Fan, W. (2014) · RSC Advances · doi:10.1039/c3ra47946c · Cited by 37
Cai, W., Zhang, S., Hu, X. D., & Jaroniec, M. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02097 · Cited by 34
Prospect of Post-Combustion Carbon Capture Technology and Its Impact on the Circular Economy
Olabi, A. G., Wilberforce, T., Sayed, E. T., Shehata, N., Alami, A. H., Maghrabie, H. M., & Abdelkareem, M. A. (2022) · Energies · doi:10.3390/en15228639 · Cited by 38
Guo, T., Tian, W., & Wang, Y. (2022) · Atmosphere · doi:10.3390/atmos13071110 · Cited by 32
Influence of Nitrogen moieties on CO2capture of Carbon Aerogel
Jeon, D., Min, B.-G., Oh, J. G., Nah, C., & Park, S. (2015) · Carbon letters · doi:10.5714/cl.2015.16.1.057 · Cited by 37
“Solid adsorbents such as porous carbons, macroporous silica (SBA-15, MCM-41), zeolites, and metal-organic frameworks (MOFs) are widely studied [11-21].”
BackgroundWang, S., Liu, R., Han, C., Wang, J., Li, M., Yao, J., Li, H., & Wang, Y. (2014) · Nanoscale · doi:10.1039/c4nr03826f · Cited by 34
Yang, Z., Xia, Y., & Zhu, Y. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.05.016 · Cited by 32
Lü, J., & Cao, R. (2016) · Angewandte Chemie · doi:10.1002/ange.201602116 · Cited by 32
Nitrogen‐Functionalized Hydrothermal Carbon Materials by Using Urotropine as the Nitrogen Precursor
Straten, J. W., Schleker, P. P. M., Krasowska, M., Veroutis, E., Granwehr, J., Auer, A. A., Hetaba, W., Becker, S., Schlögl, R., & Heumann, S. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201800341 · Cited by 34
Boningari, T., Inturi, S. N. R., Manousiouthakis, V. I., & Smirniotis, P. G. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00188 · Cited by 34
Xiong, L., Wang, X., Li, L., Jin, L., Zhang, Y., Song, S., & Liu, R. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b02769 · Cited by 33
Mazaj, M., Bjelica, M., Žagar, E., Logar, N. Z., & Kovačič, S. (2020) · ChemSusChem · doi:10.1002/cssc.201903116 · Cited by 33
Bahamon, D., Ogungbenro, A. E., Khaleel, M., Abu-Zahra, M. R. M., & Vega, L. F. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05542 · Cited by 31
Tuning porosity of coal-derived activated carbons for CO2 adsorption
Qie, Z., Wang, L., Sun, F., Xiang, H., Wang, H., Gao, J., Zhao, G., & Fan, X. (2022) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-022-2155-1 · Cited by 31
Porous Carbons for Carbon Dioxide Capture
Lu, A., Hao, G., & Zhang, X.-Q. (2014) · Green chemistry and sustainable technology · doi:10.1007/978-3-642-54646-4_2 · Cited by 36
Mixed-valent MnSiO3/C nanocomposite for high-performance asymmetric supercapacitor
Li, B., Zhang, X., Hu, C., Dou, J., Xia, G., Zhang, P., Zheng, Z., Pan, Y., Yu, H., & Chen, C. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.08.054 · Cited by 31
Shi, N., Liu, Q., Liu, Y., Chen, L., Chen, N., Peng, J., & Ma, L. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03747 · Cited by 30
Computational Design of a Photoresponsive Metal–Organic Framework for Post Combustion Carbon Capture
Park, J., Suh, B. L., & Kim, J. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c01878 · Cited by 31
Hong, S. M., Lim, G.-S., Kim, S. H., Kim, J. H., Lee, K. B., & Ham, H. C. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.07.034 · Cited by 33
N-enriched ACF from coal-based pitch blended with urea-based resin for CO2 capture
Díez, N., Álvarez, P., Granda, M., Blanco, C., Santamarı́a, R., & Menéndez, R. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.08.054 · Cited by 31
One-step solvothermal carbonization to microporous carbon materials derived from cyclodextrins
Zhao, Y., Zhao, L., Mao, L., & Han, B. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10227k · Cited by 32
Solid adsorbents for carbon dioxide capture: a review
Rashid, H., & Rafey, A. (2023) · Chemistry and Ecology · doi:10.1080/02757540.2023.2227622 · Cited by 35
Lotfinezhad, M., Tahmasebpoor, M., & Pevida, C. (2024) · Environmental Research · doi:10.1016/j.envres.2024.120017 · Cited by 32
Designing guidelines of coal-based porous carbon for CO2 capture under flue gas conditions: A review
Liu, J., Zhong, X., & Chen, G. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162029 · Cited by 33
Lin, D., Zhang, X., Cui, X., & Chen, W. (2014) · RSC Advances · doi:10.1039/c4ra04545a · Cited by 30
Synthesis of S, N co-doped porous carbons from polybenzoxazine for CO2 capture
Jin, Z.-E., Wang, J., Zhao, R., Guan, T., Zhang, D., & Li, K. (2018) · New Carbon Materials · doi:10.1016/s1872-5805(18)60347-6 · Cited by 30
Carbon Spheres as CO2 Sorbents
Staciwa, P., Narkiewicz, U., Sibera, D., Moszyński, D., Wróbel, R. J., & Cormia, R. D. (2019) · Applied Sciences · doi:10.3390/app9163349 · Cited by 30
Boosting Li-CO2 battery performances by creating holey structure on CNT cathodes
Xie, H., Zhang, B., Hu, C., Xiao, N., & Liu, D. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140310 · Cited by 30
Burrow, J. N., Pender, J. P., Guerrera, J. V., Wygant, B. R., Eichler, J. E., Calabro, D. C., & Mullins, C. B. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01112 · Cited by 33
Sathishkumar, R., & Prakash, R. (2025) · Fuel · doi:10.1016/j.fuel.2025.136521 · Cited by 35
From fish scales to highly porous N-doped carbon: a low cost material solution for CO 2 capture
Huang, B., Shao, H., Liu, N., Xu, Z. J., & Huang, Y. (2015) · RSC Advances · doi:10.1039/c5ra16745k · Cited by 33
Ghosh, S., & Barron, A. R. (2017) · Sustainable Energy & Fuels · doi:10.1039/c6se00102e · Cited by 34
Wu, Y., Chen, Z., Liu, Y., Xu, Y., & Liu, Z. (2018) · Fuel · doi:10.1016/j.fuel.2018.06.094 · Cited by 29
Cai, W., Ding, J., He, Y., Chen, X., Yuan, D., Chen, C., Cheng, L., Du, W., Wan, H. L., & Guan, G. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c00294 · Cited by 31
Liu, Z., Yang, Y., Du, Z., Xing, W., Komarneni, S., Zhang, Z., Gao, X., & Yan, Z. (2015) · Nanoscale Research Letters · doi:10.1186/s11671-015-1041-x · Cited by 28
“Open Access This article is International License (http://creativecommo reproduction in any medium, provided you link to the Creative Commons license, and i In this context, zeolites [4], porous carbons [5], porous silicas [6], BCN graphene analogues [7], porous organic polymers [8], MOFs [9, 10], and COFs [11, 12] ha…”
BackgroundZou, J., Dai, Y., Tian, C., Pan, K., Jiang, B., Wang, L., Zhou, W., Tian, G., Wang, X. Q., Xing, Z., et al. (2012) · Environmental Science & Technology · doi:10.1021/es202431h · Cited by 28
Spectroscopic tracking of mechanochemical reactivity and modification of a hydrothermal char
Timko, M. T., Maag, A. R., Venegas, J. M., McKeogh, B. J., Yang, Z., Tompsett, G. A., Escapa, S., Toto, J. J., Heckley, E. M., & Greenaway, F. T. (2016) · RSC Advances · doi:10.1039/c5ra24561c · Cited by 29
Synthesis and Low-Temperature CO2 Capture Properties of a Novel Mg–Zr Solid Sorbent
Jiao, X., Li, L., Zhao, N., Xiao, F., & Wei, W. (2013) · Energy & Fuels · doi:10.1021/ef401085a · Cited by 28
Toward sustainable hydrogen storage and carbon dioxide capture in post-combustion conditions
Moussa, M., Bader, N., Querejeta, N., Durán, I., Pevida, C., & Ouederni, A. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.03.003 · Cited by 30
Javaid, S. F., Dai, M., Wu, Y., Luo, H., Amjed, M. A., Ali, I., Peng, C., & Naz, I. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-08549-3 · Cited by 29
Hao, Y., Wang, Z., Wang, Z., & He, Y. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2018.10.076 · Cited by 27
Yuan, M., Liu, X., Li, C., Yu, J., Zhang, B., & Ma, Y. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.157 · Cited by 28
A facile approach to the fabrication of MgO@Y composite for CO2 capture
Gao, F., Wang, S., Chen, G., Duan, J., Dong, J., & Wang, W. (2019) · Adsorption · doi:10.1007/s10450-019-00147-w · Cited by 30
García-Díez, E., Castro‐Muñiz, A., Paredes, J. I., Maroto‐Valer, M. M., Suárez‐García, F., & García, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.110986 · Cited by 27
Li, M., Liu, X., Sun, C., Stevens, L. A., & Liu, H. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107471 · Cited by 42
Wang, J., Zhang, T., Yang, Y., Li, M., Qin, Q., Lu, P., Ning, P., & Wang, Q. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02820 · Cited by 27
de Araújo, M. J. G., Rocha, J. V., Souza, V. C. D., Sapag, K., & Pergher, S. B. C. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.05.016 · Cited by 27
Wang, Y., Gao, F., Niu, Y., Zhang, J., Chen, K., Zhou, Y., Tang, X., Zhao, S., & Yi, H. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta01304f · Cited by 30
Electrochemical performance of polyacrylonitrile-derived activated carbon prepared via IR pyrolysis
Efimov, M. N., Sosenkin, V. E., Volfkovich, Y. M., Vasilev, A. A., Muratov, D. G., Baskakov, S. A., Efimov, O. N., & Karpacheva, G. P. (2018) · Electrochemistry Communications · doi:10.1016/j.elecom.2018.10.016 · Cited by 26
Removal of CO2 from Flue Gas Using Seaweed Porous Carbons Prepared by Urea Doping and KOH Activation
Shi, S., Ochedi, F. O., Cui, S., & Liu, Y. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03200 · Cited by 26
Monolithic carbon aerogels from bioresources and their application for CO2 adsorption
Geng, S., Maennlein, A., Yu, L., Hedlund, J., & Oksman, K. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111236 · Cited by 27
Nitrogen-doped porous carbon prepared from a liquid carbon precursor for CO 2 adsorption
Zhang, X., Lin, D., & Chen, W. (2015) · RSC Advances · doi:10.1039/c5ra08014b · Cited by 27
Chang, B., Sun, L. G., Shi, W., Zhang, S., & Yang, B. (2018) · ACS Omega · doi:10.1021/acsomega.7b02056 · Cited by 29
Zhang, S., Zhou, Q., Jiang, X., Yao, L., Jiang, W., & Xie, R. (2019) · Environmental Technology · doi:10.1080/09593330.2019.1615131 · Cited by 27
Modulating the porosity of N-doped carbon materials for enhanced CO 2 capture and methane uptake
Albeladi, N., & Mokaya, R. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta03273j · Cited by 27
Carbon-based materials for low concentration CO2 capture and electrocatalytic reduction
Hu, Y., Ding, Y., Xie, L., Li, H., Jiang, Y., Gong, K., Zhang, A., Zhu, W., & Wang, Y. (2024) · Carbon · doi:10.1016/j.carbon.2024.119574 · Cited by 28
Shaida, M. A., Ansari, S. S., Muhammad, R., Ibrahim, S. M., Farooqi, I. H., & Amhamed, A. I. (2024) · Fuel · doi:10.1016/j.fuel.2024.133183 · Cited by 30
CO2 Separation and Capture Properties of Porous Carbonaceous Materials from Leather Residues
Bermúdez, J. M., Dominguez, P., Arenillas, A., Cot, J., Weber, J., & Luque, R. (2013) · Materials · doi:10.3390/ma6104641 · Cited by 25
Zhan, T., Wu, T., Shi, Y., Chen, X., Li, Y., Zhu, M., Zhang, F., Kumakiri, I., Chen, X., & Kita, H. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2020.117853 · Cited by 24
Mohammadi, A., Anukam, A. I., Granström, K., Eskandari, S., Zywalewska, M., Sandberg, M., & Aladejana, E. B. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106531 · Cited by 28
“The oxygen-containing functional groups within the structures of the materials also played a role in the increases in pH values because oxygen-containing functional groups have affinity for certain compounds including inorganic compounds and water [49 – 51].”
Wang, X., Zhao, H., Zhou, Y., Yin, C., He, W., Feng, F., Wang, F., Lu, C., & Li, X. (2024) · Green Chemistry · doi:10.1039/d4gc00993b · Cited by 26
CO2 adsorption on crystalline graphitic nanostructures
Casco, M. E., Morelos‐Gómez, A., Vega-Díaz, S. M., Cruz‐Silva, R., Tristán-López, F., Muramatsu, H., Hayashi, T., Escandell, M. M., Terrones, M., Endo, M., et al. (2014) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2014.01.001 · Cited by 24
Liu, Z., Du, Z., Xing, W., & Yan, Z. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.12.021 · Cited by 25
Arif, A. F., Kobayashi, Y., Schneider, E. M., Hess, S. C., Balgis, R., Izawa, T., Iwasaki, H., Taniguchi, S., Ogi, T., Okuyama, K., et al. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b01353 · Cited by 25
Titirici, M. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-097744-7.00012-0 · Cited by 34
A New Approach to Kinetic Modeling of Biomass Hydrothermal Carbonization
Gallifuoco, A. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02191 · Cited by 24
Non-Energy Valorization of Residual Biomasses via HTC: CO2 Capture onto Activated Hydrochars
Gallucci, K., Taglieri, L., Papa, A. A., Di Lauro, F., Ahmad, Z., & Gallifuoco, A. (2020) · Applied Sciences · doi:10.3390/app10051879 · Cited by 24
“petroleum pitch [54]; AS-2-600: sawdust-based porous carbon [40]).”
BackgroundSultana, A. I., Cheatham, R. W., & Reza, M. T. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102350 · Cited by 25
Rao, L., Liu, S., Chen, J., Wang, L., An, L., Yang, P., & Hu, X. D. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03473 · Cited by 26
Härmas, M., Palm, R., Thomberg, T., Härmas, R., Koppel, M., Paalo, M., Tallo, I., Romann, T., Jänes, A., & Lust, E. (2019) · Journal of Applied Electrochemistry · doi:10.1007/s10800-019-01364-5 · Cited by 24
Nitrogen-Containing Porous Carbon Fibers Prepared from Polyimide Fibers for CO2 Capture
Wang, X., Xiong, L., Zhong, J., Jin, L., Yan, J., Mu, B., Zhang, Y., & Song, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c03318 · Cited by 26
Energy Densification of Lignocellulosic Biomass via Hydrothermal Carbonization and Torrefaction
Kambo, H. S. (2014) · The Atrium (University of Guelph) · Cited by 43
Investigation of CO 2 adsorption on carbon material derived from Mesua ferrea L. seed cake
Bhatta, L. K. G., Subramanyam, S., Chengala, M. D., Bhatta, U. M., Pandit, N., & Venkatesh, K. (2015) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.10.006 · Cited by 23
Wu, X., Qiao, Y., Shi, Z., & Li, C. M. (2018) · Sustainable Energy & Fuels · doi:10.1039/c7se00560a · Cited by 23
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.