Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 701–800 of 1,000
Karve, V. V., Espín, J., Asgari, M., Gele, S. V., Oveisi, E., & Queen, W. L. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202212283 · Cited by 22
Mallesh, D., Swapna, S., Rajitha, P., Soujanya, Y., Sumana, C., & Lingaiah, N. (2023) · Carbon letters · doi:10.1007/s42823-023-00487-2 · Cited by 23
Licursi, D., Antonetti, C., Fidio, N. D., Fulignati, S., Benito, P., Puccini, M., Vitolo, S., & Galletti, A. M. R. (2023) · Waste Management · doi:10.1016/j.wasman.2023.06.012 · Cited by 24
Jin, Z., Xu, Y., Sun, Q., & Lu, A. (2015) · Small · doi:10.1002/smll.201501692 · Cited by 23
Wu, Q., Liu, S., Xie, C., Yu, H., Liu, Y., Yu, S., & Huang, L. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2054-5 · Cited by 23
“Using these kinds of materials as raw materials to prepare various functional carbon materials is an environmentalfriendly, renewable, and effective way to fix and store carbon that meets the requirements of the development of society and energy use [18, 19].”
BackgroundPhysical adsorption of CO2 in biomass at atmospheric pressure and ambient temperature
Khansary, M. A., Aroon, M. A., & Shirazian, S. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01011-y · Cited by 24
Activated carbon derived from hydrothermal treatment of sucrose and its air filtration application
Hao, S.-W., Hsu, C.-H., Liu, Y., & Chang, B. K. (2016) · RSC Advances · doi:10.1039/c6ra23958g · Cited by 24
Liu, X., Liu, J., Sun, C., Liu, H., Wang, W., Smith, E. F., Jiang, L., Chen, X., & Snape, C. E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01417f · Cited by 25
Liu, Z., Ma, R., Du, W., Yang, G. Q., & Chen, T. (2021) · RSC Advances · doi:10.1039/d1ra03041h · Cited by 22
Koli, A., Battu, A. K., Motkuri, R. K., & Sabale, S. R. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-03067-y · Cited by 25
“The activation process was found to be significant in enhancing the capture capacity as compared to their carbonized counterpart [36].”
Querejeta, N., Gil, M. V., Rubiera, F., & Pevida, C. (2023) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2210 · Cited by 28
Fan, Y., Liu, Z., Sun, S., Huang, W., Ma, L., Qu, Z., Yan, N., & Xu, H. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c01983 · Cited by 22
Porous carbon pellets for physical adsorption of CO 2 : size and shape effect
Singh, B., Kemell, M., & Repo, T. (2024) · Materials Advances · doi:10.1039/d4ma00703d · Cited by 25
Kumar, K. V., & Rodríguez-Reinoso, F. (2012) · RSC Advances · doi:10.1039/c2ra20775c · Cited by 22
Moran, C. M., Marti, R. M., Hayes, S. E., & Walton, K. S. (2016) · Carbon · doi:10.1016/j.carbon.2016.11.083 · Cited by 22
CO2 adsorption on activated carbon prepared from mangosteen peel: Study by adsorption calorimetry
Giraldo, L., & Moreno‐Piraján, J. C. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6725-2 · Cited by 24
Carbon beads with a well-defined pore structure derived from ion-exchange resin beads
He, P., Haw, K., Yan, S., Tang, L., Fang, Q., Qiu, S., & Valtchev, V. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04069b · Cited by 22
Patel, H., Mangukiya, H., Maiti, P., & Maiti, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125738 · Cited by 23
Bhattacharjee, A., Kumar, R., & Sharma, K. P. (2021) · ChemSusChem · doi:10.1002/cssc.202100931 · Cited by 21
Carbon Dioxide Adsorption in Betulin‐Based Micro‐ and Macroporous Polyurethanes
Jeromenok, J., Böhlmann, W., Jäger, C., & Weber, J. (2013) · ChemistryOpen · doi:10.1002/open.201200045 · Cited by 22
Lin, W., Cai, Z., Lv, X., Xiao, Q., Chen, K., Li, H., & Wang, C. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02872 · Cited by 21
Preparation and characterization of pitch-based nanoporous carbons for improving CO2 capture
Lee, S., Yoo, H., Park, S. W., Park, S. H., Oh, Y. S., Rhee, K. Y., & Park, S. (2014) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2014.03.038 · Cited by 21
Wang, M., Fu, J., Zhu, J., Yan, Y. P., & Xu, Q. J. (2015) · RSC Advances · doi:10.1039/c5ra02823j · Cited by 22
Zheng, L., Li, W. B., & Chen, J. (2018) · RSC Advances · doi:10.1039/c8ra04367a · Cited by 21
Rapid CO2 Adsorption over Hierarchical ZSM-5 with Controlled Mesoporosity
Qian, X., Bai, G., He, P., Fei, Z., Liu, Q., Zhang, Z., Chen, X., Tang, J., Cui, M., & Qiao, X. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b03325 · Cited by 21
Recent advances for CO2 mineralization in biochar-amended cementitious composites
Roy, S., Sreenivasan, H., Sarmah, A. K., Baniasadi, H., & Bordoloi, S. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108141 · Cited by 28
Zhang, J., Yuan, R., Natesakhawat, S., Wang, Z., Zhao, Y., Yan, J., Liu, S., Lee, J., Luo, D., Gottlieb, E. R., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11910 · Cited by 20
Phuriragpitikhon, J., Phinney, E. O., & Jaroniec, M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04985-w · Cited by 20
Biomass as a source of adsorbents for CO2 capture
Karimi, M., Rodrigues, A. E., & Silva, J. A. C. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821601-9.00010-8 · Cited by 24
Direct synthesis of organic salt-derived porous carbons for enhanced CO 2 and methane storage
Alali, I., & Mokaya, R. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta00044c · Cited by 22
Zhang, Y., Tian, F., Guo, X., Bai, M., Tang, T., Di, X., Wang, W., Liu, Z., & Shao, X. (2023) · Sustainable Energy & Fuels · doi:10.1039/d3se00220a · Cited by 20
Facilely Fabricating Multifunctional N-Enriched Carbon
Wan, M. M., Sun, X. D., Li, Y. Y., Zhou, J., Wang, Y., & Zhu, J. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09759 · Cited by 20
You, Y., Moon, E.-H., Heo, I., Park, H., Hong, J.-S., & Suh, J. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.09.019 · Cited by 20
Shi, W., Zhang, Q., Liu, S., Su, S., Chang, B., & Yang, B. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.04.146 · Cited by 21
Xue, C., Zhu, H., Xu, T., Wang, E., Xiao, B., Liu, X., Hao, X., & Guan, G. (2017) · RSC Advances · doi:10.1039/c6ra26997d · Cited by 20
Hao, W., Björnerbäck, F., Trushkina, Y., Bengoechea, M. O., Salazar‐Alvarez, G., Barth, T., & Hedin, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.08.033 · Cited by 20
RetractedPolyamidoamine dendrimer functionalized cellulose nanocrystals for CO2 capture
Wang, Y., He, X. B., & Lu, Q. (2021) · Cellulose · doi:10.1007/s10570-021-03787-w · Cited by 19
An overview of effect of process parameters for removal of CO2 using biomass-derived adsorbents
Javed, M., Zahoor, M., Mazari, S. A., Qureshi, S. S., Nizamuddin, S., Jatoi, A. S., & Mubarak, N. M. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-01548-0 · Cited by 22
“For example, the temperature of chemical activation plays a positive role in the adsorption capacity activated carbons, as is noticed by Sevilla and Fuertes [35].”
BackgroundSynthesis and characterization of activated carbon from Delonix regia seeds for CO2 adsorption
Bhatta, L. K. G., Venkatesh, K., Kiran, N., Gundanna, S. K., & Bhatta, U. M. (2021) · Energy and Climate Change · doi:10.1016/j.egycc.2021.100064 · Cited by 19
Activated g-C3N4 Photocatalyst with Defect Engineering for Efficient Reduction of CO2 in Water
Tong, Z., Hai, Y., Wang, B., Lv, F., Zhong, Z., & Xiong, R. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c02076 · Cited by 19
dos Santos, L. J., Soares, I. D. A., Barreto, A. G., & Tavares, F. W. (2024) · Adsorption · doi:10.1007/s10450-024-00444-z · Cited by 19
“…materials, including activated carbons, carbon fibers, and carbon molecular sieves, are widely used in various industrial applications such as mixture separations [50], water purification [2], CO 2 capture [36, 68, 79], electrodes [42, 52, 85], hydrogen [32] and natural gas storage [16].”
Guo, S., Gan, J., Zhao, D., Zhu, S., Qu, H., Li, X., & Song, D. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142252 · Cited by 21
Liu, Z., Zhu, Y., Du, Z., Xing, W., Komarneni, S., & Yan, Z. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0065-z · Cited by 18
Sustainable production of activated carbon spheres from ethyl cellulose
Sun, P., Zhang, K., Shang, S., Song, J., & Wang, D. (2016) · RSC Advances · doi:10.1039/c6ra16737c · Cited by 20
Microporous Humins Synthesized in Concentrated Sulfuric Acid Using 5-Hydroxymethyl Furfural
Björnerbäck, F., Bernin, D., & Hedin, N. (2018) · ACS Omega · doi:10.1021/acsomega.8b01274 · Cited by 20
Wang, J., Yin, Y., Liu, X., Liu, Y., Xiao, Q., Zhao, L., Demir, M., Şimşek, U. B., Wang, L., & Hu, X. (2026) · Langmuir · doi:10.1021/acs.langmuir.5c05574 · Cited by 21
Synthesis of micro–mesoporous CPO-27-Mg@KIT-6 composites and their test in CO 2 adsorption
Villarroel-Rocha, D., Godoy, A. A., Toncón-Leal, C. F., Rocha, J. V., Moreno, M. S., Bernini, M. C., Narda, G. E., & Sapag, K. (2020) · New Journal of Chemistry · doi:10.1039/c9nj06358g · Cited by 18
Alhwaige, A. A., Ishida, H., & Qutubuddin, S. (2024) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.4c00232 · Cited by 19
Liu, Y., Chen, Y., Tian, L., & Hu, R. (2016) · Journal of Porous Materials · doi:10.1007/s10934-016-0294-9 · Cited by 19
In situ analysis of the adsorption behaviors of CO 2 on the surface of MIL-91(Al)
Kong, Z., Niu, Z., He, L., Chen, Q., Zhou, L., Cheng, Y., & Guan, Q. (2018) · New Journal of Chemistry · doi:10.1039/c8nj03833c · Cited by 18
Zhou, J. P., Wang, X., & Xing, W. (2018) · Royal Society of Chemistry eBooks · doi:10.1039/9781788013352-00001 · Cited by 29
Vinayakumar, K., Palliyarayil, A., Kumar, N. S., & Sil, S. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-20355-2 · Cited by 17
Yao, Z., Lu, Y., Song, J., & Zhang, K. (2023) · Molecules · doi:10.3390/molecules28135077 · Cited by 17
“However, under common environmental conditions, most activated carbons show an adsorbable capability less than 3 mmol/g of CO2 [20].”
BackgroundBalsa Wood-Derived Carbon Enriched with Hydroxyl Functional Groups for Efficient CO 2 Sorption
Meng, Y., Neupane, M., Glenna, D. M., Jana, A., Wang, W., Zhao, H. Y., Qian, J., Yang, Y., Wang, L., & Snyder, S. W. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c00880 · Cited by 19
Hierarchically Porous Heteroatom‐co‐Doped Carbons for Enhanced Carbon Dioxide Capture
Kim, C., Lee, S., & Park, S. (2025) · Energy & environment materials · doi:10.1002/eem2.70026 · Cited by 18
Adsorptive removal of gaseous contaminants using biomass-based adsorbents
Adegoke, K. A., Okon-Akan, O. A., Adebusuyi, T. A., Adewuyi, O. I., Adu, P. O., Bamisaye, A., Adegoke, O. R., Babarinde, C. O., & Bello, O. S. (2025) · RSC Advances · doi:10.1039/d4ra08572h · Cited by 24
Li, H., Li, C., Budarin, V. L., Clark, J. H., NORTH, M. J., Wang, J., & Wu, X. (2022) · Green Chemistry · doi:10.1039/d1gc03715c · Cited by 17
Ye, X., Liu, W., Lu, Y. Q., Zheng, X., Bi, Y., Zheng, M., Han, L., Liu, B., Ning, Y., Jafri, H., et al. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta00716f · Cited by 18
Dai, W., Liu, Y., Su, W., Hu, G., Deng, G., & Hu, X. D. (2012) · Adsorption Science & Technology · doi:10.1260/0263-6174.30.2.183 · Cited by 17
“Some recent studies have already shown that activated carbons have high CO2 sorption capacities, indicating that they are promising adsorbents for reducing CO2 emissions (Hu et al. 2011; Sevilla and Fuertes 2011; Wahby et al. 2010).”
BackgroundLópez‐Salas, N., del Monte, F., Tamayo, A., Fierro, J. L. G., Lacey, A. L. D., Ferrer, M. L., & Gutiérrez, M. C. (2014) · ChemSusChem · doi:10.1002/cssc.201402753 · Cited by 18
Novel MgO/hollow carbon sphere composites for CO 2 adsorption
Jiao, C., Lu, J., Gu, X., Majeed, Z., & Jiang, H. (2018) · New Journal of Chemistry · doi:10.1039/c7nj04398h · Cited by 17
Lu, C., Qian, X.-Z., Zhu, H.-Y., Hu, Y.-X., Zhang, Y., Zhang, B., Kong, L., & Liu, M. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab4d36 · Cited by 19
Solvent-Free Synthesis of N-Doped Porous Carbons from Chitosan for an Efficient CO2 Capture
Yang, Q., Teng, D., Qu, J., Li, P., & Cao, Y. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02351 · Cited by 17
Nitrogen-containing activated carbon fibers derived from silk fibers for CO2 capture
Wang, P., Lang, J., Xu, S., & Wang, X. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.03.027 · Cited by 18
Lee, B., Stowe, H. M., Lee, K. H., Hur, N. H., Hwang, S., Paek, E., & Hwang, G. S. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03803h · Cited by 17
Zhao, C., Li, X., Liu, G., & Wang, X. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129742 · Cited by 16
Sahana, C. M., & Gupta, S. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106255 · Cited by 18
Kuloglija, S., Kropik, I.-M., Ahmed, A. E. G., Kalman, V., Windbacher, A., Jordan, C., Konior, A., Abbaspour, N., Steinacher, N., Winter, F., et al. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.136079 · Cited by 18
Liu, Z., Li, X., Shi, D., Guo, F., Zhao, G., Hei, Y., Xiao, Y., Zhang, X., Peng, Y. L., & Sun, W. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c00595 · Cited by 17
Goskula, S., Siliveri, S., Gujjula, S. R., Adepu, A. K., Chirra, S., & Venkatathri, N. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-05198-2 · Cited by 19
“The use of porous materials is highly advantageous in many processes, including the generation of clean fuels, the transformation of waste into energy, the mitigation of greenhouse gas emissions, and the degradation of hazardous compounds [1–7].”
InfluentialLamata‐Bermejo, I., Alba, M. D., & Ramirez‐Rico, J. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.114288 · Cited by 18
Chen, A., Liu, C., Yu, Y., Hu, Y., Lv, H., Zhang, Y., Shen, S., & Zhang, J. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.05.045 · Cited by 16
The effect of surfactants on carbon xerogel structure and CO2 capture
Wang, S., Xu, Y., Yan, M., Zhang, L., & Liu, Z. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.07.023 · Cited by 16
Yu, P., Luo, Z., Wang, Q., Fang, M., Zhou, J., Wang, W., Liang, X., & Cai, W. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101214 · Cited by 20
Gutiérrez-Martínez, J., Nieto-Delgado, C., Avalos‐Borja, M., Basiuk, E. V., & Rangel-Mendez, J. R. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117956 · Cited by 15
Hierarchical porous N-doped carbon xerogels for high performance CO2 capture and supercapacitor
Wang, S., Miao, J., Liu, M., Zhang, L., & Liu, Z. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.126285 · Cited by 16
García-Ruiz, D. L., Granados‐Martínez, F. G., Gutiérrez-García, C. J., Ambriz-Torres, J. M., Contreras-Navarrete, J. J., Flores‐Ramírez, N., Méndez, F., & Domratcheva‐Lvova, L. G. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821938-6.00008-6 · Cited by 16
Alali, I., & Mokaya, R. (2022) · Energy & Environmental Science · doi:10.1039/d2ee02322a · Cited by 19
Utilization of spent dregs for the production of activated carbon for CO2 adsorption
Serafin, J. (2017) · Green Sciences · doi:10.1515/pjct-2017-0026 · Cited by 17
Internal and external synergistic CO2 capture of cement-based materials using modified biochar
Yang, Z., Xu, J., Chen, T., Gao, X., & Qin, L. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140696 · Cited by 35
Fabrication of waste biomass-derived KOH activated carbon for enhanced CO 2 capture
Tonu, N. T., Kundu, S., Islam, M. M., Dhar, P. K., Khandaker, T., Anik, M. A.-A. M., Dutta, S. K., Hasan, M. K., & Hossain, M. S. (2024) · New Journal of Chemistry · doi:10.1039/d4nj04495a · Cited by 18
Bergna, D., Romar, H., Tuomikoski, S., Runtti, H., Kangas, T., Tynjälä, P., & Lassi, U. M. (2017) · Springer eBooks · doi:10.1007/978-3-319-49595-8_9 · Cited by 19
Yusuf, N. A. A. N., Razab, M. K. A. A., Bakar, M. B. A., Yen, K. J., Tung, C. W., Ghani, R. S. M., & Nordin, M. N. (2018) · Jurnal Teknologi · doi:10.11113/jt.v81.12599 · Cited by 15
Liang, L., Zhou, M., Tan, C., Tian, X., & Li, K. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.05.050 · Cited by 15
Microporous and hollow carbon spheres derived from soft drinks: Promising CO2 separation materials
Teague, C. M., Schott, J. A., Stieber, C., Mann, Z. E., Zhang, P., Williamson, B. R., Dai, S., & Mahurin, S. M. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.04.017 · Cited by 15
Development of microporous-activated carbons derived from two renewable precursors for CO2 capture
Gómez-Delgado, E., Nunell, G. V., Cukierman, A. L., & Bonelli, P. R. (2019) · Carbon letters · doi:10.1007/s42823-019-00079-z · Cited by 16
Cui, J., Zhang, K., Zhang, X., & Lee, Y. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109947 · Cited by 15
New Metrics of Green Sorbents for CO2 Capturing
Eftaiha, A. F., Qaroush, A. K., Abu‐Daabes, M. A., Alsyouri, H. M., & Assaf, K. I. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900121 · Cited by 16
Biomass-derived microporous adsorbents for selective CO2 capture
Chowdhury, S., & Pan, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820084-1.00025-9 · Cited by 18
Thiruvenkatachari, R., Su, S., Yu, X. X., & Jin, Y. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.08.018 · Cited by 15
Danso‐Boateng, E., Nyktari, E., Wheatley, A. D., Holdich, R. G., & Mohammed, A. S. (2020) · Water Air & Soil Pollution · doi:10.1007/s11270-020-04557-3 · Cited by 18
The Resource Utilization of Poplar Leaves for CO2 Adsorption
Wang, X., Kong, F.-Y., Zeng, W.-L., Zhang, H.-X., Xin, C., & Kong, X. (2024) · Molecules · doi:10.3390/molecules29092024 · Cited by 15
Gillani, Q. F., Bakbolat, B., Tatykayev, B., Sultanov, F. R., & Mentbayeva, A. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118401 · Cited by 18
Activated carbon materials with a rich surface chemistry prepared from L-cysteine amino acid
Reljic, S., Collados, C. C., Jardim, E. D. O., Farrando-Pérez, J., Escandell, M. M., & Silvestre‐Albero, J. (2022) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2022.113446 · Cited by 14
Kenyota, N., Jarernboon, W., & Laokul, P. (2023) · Materials Science and Engineering B · doi:10.1016/j.mseb.2023.116293 · Cited by 14
Cai, J., Liang, Q., Tang, Y., Yang, J., Fang, M., & Yao, S. (2024) · Fuel · doi:10.1016/j.fuel.2024.132466 · Cited by 14
MXenes: Are They Ready for Direct Air Capture of CO 2 ?
Bhowmik, K. C., Rahman, M. A., Ahmed, Y., & Hai, T. B. (2025) · Chemistry - An Asian Journal · doi:10.1002/asia.202401822 · Cited by 17
Podder, S., Jungi, H., & Mitra, J. (2025) · Chemistry - A European Journal · doi:10.1002/chem.202500865 · Cited by 19
Babarao, R., Rubio‐Martínez, M., Hill, M. R., & Thornton, A. W. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b01484 · Cited by 15
Termanalia arjuna Waste Biomass‐Derived Porous Activated Carbons for Efficient CO2 Capture
Mallesh, D., Swapna, S., Rajitha, P., & Lingaiah, N. (2022) · Chemical Engineering & Technology · doi:10.1002/ceat.202200208 · Cited by 14
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.