Sustainable porous carbons with a superior performance for CO2 capture
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Sustainable porous carbons have been prepared by chemical activation of hydrothermally carbonized polysaccharides (starch and cellulose) and biomass (sawdust). These materials were investigated as sorbents for CO2 capture. The activation process was carried out under severe (KOH/precursor = 4) or mild (KOH/precursor = 2) activation conditions at different temperatures in the 600–800 °C range. Textural characterization of the porous carbons showed that the samples obtained under mild activating conditions exhibit smaller surface areas and pore sizes than those prepared by employing a greater amount of KOH. However, the mildly activated carbons exhibit a good capacity to store CO2, which is mainly due to the presence of a large number of narrow micropores (<1 nm). A very high CO2 uptake of 4.8 mmol·g−1 (212 mg CO2·g−1) was registered at room temperature (25 °C) for a carbon activated at 600 °C using KOH/precursor = 2. To the best of our knowledge, this result constitutes the largest ever recorded CO2 uptake at room temperature for any activated carbon. Furthermore, we observed that these porous carbons have fast CO2 adsorption rates, a good selectivity for CO2–N2 separation and they can be easily regenerated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Self-citationRao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Sevilla, M., & Fuertes, A. B. (2009) · Chemistry – A European Journal · doi:10.1002/chem.200802097 · Cited by 1,509
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Items 301–400 of 1,000
Preparation of renewable porous carbons for CO2 capture – A review
Shen, Y. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107437 · Cited by 94
Granular KOH-activated carbons from coal-based cokes and their CO2 adsorption capacity
Labus, K., Gryglewicz, S., & Machnikowski, J. (2013) · Fuel · doi:10.1016/j.fuel.2013.10.042 · Cited by 95
Tian, Z., Xiang, M., Zhou, J., Hu, L., & Cai, J. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.06.053 · Cited by 97
Reversible CO2adsorption by an activated nitrogen doped graphene/polyaniline material
Christian Kemp, K., Chandra, V., Saleh, M., & Kim, K. S. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/23/235703 · Cited by 93
Li, D., Zhou, J., Zhang, Z., Li, L., Tian, Y., Lu, Y., Qiao, Y., Li, J., & Wen, L. (2016) · Carbon · doi:10.1016/j.carbon.2016.12.039 · Cited by 95
The synthesis of MOF derived carbon and its application in water treatment
Ding, J., Tang, Y., Zheng, S., Zhang, S., Xue, H., Kong, Q., & Pang, H. (2022) · Nano Research · doi:10.1007/s12274-022-4327-1 · Cited by 95
Sevilla, M., & Fuertes, A. B. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.02.029 · Cited by 93
Self-citationEnhancement of CO2 adsorption on biochar sorbent modified by metal incorporation
Zubbri, N. A., Mohamed, A. R., Kamiuchi, N., & Mohammadi, M. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-07734-3 · Cited by 92
Ali, A., Othman, M. R., Naji, S. Z., & Hashim, A. S. (2021) · Materials Today Sustainability · doi:10.1016/j.mtsust.2021.100063 · Cited by 105
Zhu, B., Shang, C., & Guo, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01113 · Cited by 91
Gokhale, R. R., Aravindan, V., Yadav, P., Jain, S., Phase, D. M., Srinivasan, M., & Ogale, S. (2014) · Carbon · doi:10.1016/j.carbon.2014.08.086 · Cited by 95
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.10.036 · Cited by 94
Ganesan, A., Mukherjee, R., Raj, J., & Shaijumon, M. M. (2014) · Journal of Porous Materials · doi:10.1007/s10934-014-9833-4 · Cited by 96
Efficient CO2 Capture by Nitrogen-Doped Biocarbons Derived from Rotten Strawberries
Yue, L., Rao, L., Wang, L., Wang, L., Wu, J., Hu, X., DaCosta, H., Yang, J., & Fan, M. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b02692 · Cited by 88
Wang, Y., Wang, M., Wang, Z., Wang, S., & Fu, J. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.145130 · Cited by 90
Mestre, A. S., Tyszko, E., Andrade, M. A., Galhetas, M., Freire, C., & Carvalho, A. P. (2015) · RSC Advances · doi:10.1039/c4ra14495c · Cited by 89
Lu, T., Bai, J., Demir, M., Hu, X. D., Huang, J., & Wang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121368 · Cited by 88
Inexpensive polyphenylene network polymers with enhanced microporosity
Msayib, K. J., & McKeown, N. B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03257e · Cited by 88
Facile fabrication of nitrogen doped carbon from filter paper for CO2 adsorption
Cui, H., Xu, J., Shi, J., Yan, N., & Liu, Y. (2019) · Energy · doi:10.1016/j.energy.2019.115936 · Cited by 87
Tang, Z., Gao, J., Zhang, Y., Du, Q., Feng, D., Dong, H., Peng, Y., Zhang, T., & Xie, M. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107613 · Cited by 92
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Altwala, A., & Mokaya, R. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01340d · Cited by 94
Activated graphene-derived porous carbon with exceptional gas adsorption properties
Ganesan, A., & Shaijumon, M. M. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.08.021 · Cited by 92
Kou, J., & Sun, L. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02857 · Cited by 87
An overview of the materials and methodologies for CO 2 capture under humid conditions
Ray, B., Churipard, S. R., & Peter, S. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08862a · Cited by 93
Highly porous N-doped carbons impregnated with sodium for efficient CO 2 capture
Kim, Y. K., Kim, G. M., & Lee, J. W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01776a · Cited by 92
Qi, S.-C., Liu, Y., Peng, A.-Z., Xue, D.-M., Liu, X., Liu, X.-Q., & Sun, L.-B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.167 · Cited by 84
Candamano, S., Policicchio, A., Conte, G., Abarca, R., Algieri, C., Chakraborty, S., Curcio, S., Calabrò, V., Crea, F., & Agostino, R. G. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129843 · Cited by 91
Ekhlasi, L., Younesi, H., Rashidi, A., & Bahramifar, N. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.09.017 · Cited by 83
Wang, J., & Liu, Q. (2014) · Nanoscale · doi:10.1039/c3nr05825e · Cited by 82
Nizamuddin, S., Qureshi, S. S., Baloch, H. A., Siddiqui, M. T. H., Takkalkar, P., Mubarak, N. M., Dumbre, D. K., Griffin, G. J., Madapusi, S. P., & Tanksale, A. (2019) · Materials · doi:10.3390/ma12030403 · Cited by 87
Yuan, B., Wang, J., Chen, Y., Wu, X., Luo, H., & Deng, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08436a · Cited by 83
Effect of sewage sludge hydrochar on soil properties and Cd immobilization in a contaminated soil
Ren, J., Wang, F., Zhai, Y., Zhu, Y., Peng, C. X., Wang, T., Li, C., & Zeng, G. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.09.102 · Cited by 84
Zhang, Y., Guan, J., Wang, X., Yu, J., & Ding, B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14635 · Cited by 81
Durán-Jiménez, G., Stevens, L. A., Kostas, E. T., Hernández‐Montoya, V., Robinson, J. P., & Binner, E. R. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124309 · Cited by 86
“[28] demonstrated that by using an impregnation ratio of 2 (KOH/hydrochar), an activated carbon with a CO2 uptake of 4.”
BackgroundMethodKhoshraftar, Z., & Ghaemi, A. (2022) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2022.100342 · Cited by 88
Chomiak, K., Gryglewicz, S., Kierzek, K., & Machnikowski, J. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.026 · Cited by 85
Yuan, X., Choi, S. W., Jang, E., & Lee, K. B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.168 · Cited by 83
Xu, M., Zhang, Y., Yang, S., Mo, L., & Liu, P. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105197 · Cited by 91
Adeniran, B., Masika, E., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03565h · Cited by 80
Hydrothermal Carbonization for Hydrochar Production and Its Application
Zhang, S., Zhu, X., Zhou, S., Shang, H., Luo, J., & Tsang, D. C. W. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811729-3.00015-7 · Cited by 103
Sustainable Porous Carbon Materials Derived from Wood-Based Biopolymers for CO2 Capture
Xu, C., & Strømme, M. (2019) · Nanomaterials · doi:10.3390/nano9010103 · Cited by 88
“reported on chemical activation of hydrothermally carbonized cellulose by KOH [16].”
BackgroundInfluentialTaheri Najafabadi, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.022 · Cited by 79
Zhang, Y., Li, B., Williams, K., Gao, W., & Ma, S. (2013) · Chemical Communications · doi:10.1039/c3cc45252b · Cited by 78
Patiño, J., Gutiérrez, M. C., Carriazo, D., Ania, C. O., Parra, J. B., Ferrer, M. L., & Monte, F. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22029f · Cited by 79
Sevilla, M., Sangchoom, W., Balahmar, N., Fuertes, A. B., & Mokaya, R. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00809 · Cited by 89
Self-citationLee, Y. J., Talapaneni, S. N., & Coşkun, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08930 · Cited by 80
Hao, W., Björnerbäck, F., Trushkina, Y., Oregui Bengoechea, M., Salazar-Alvarez, G., Barth, T., & Hedin, N. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02795 · Cited by 78
Efficacies of Carbon-Based Adsorbents for Carbon Dioxide Capture
Khandaker, T., Hossain, M. S., Dhar, P. K., Rahman, M. S., Hossain, M. A., & Ahmed, M. B. (2020) · Processes · doi:10.3390/pr8060654 · Cited by 82
Wang, P., Zhang, G., Chen, W., Chen, Q., Jiao, H., Liu, L., Wang, X., & Deng, X. (2020) · ACS Omega · doi:10.1021/acsomega.0c03497 · Cited by 81
Zhu, Y., Wu, J., Zhang, Y., Miao, Z., Niu, Y., Guo, F., & Xi, Y. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125452 · Cited by 78
Yeast‐Based Microporous Carbon Materials for Carbon Dioxide Capture
Shen, W., He, Y., Zhang, S., Li, J., & Fan, W. (2012) · ChemSusChem · doi:10.1002/cssc.201100735 · Cited by 78
Zhu, B., Qiu, K., Shang, C., & Guo, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06072e · Cited by 82
Facile Synthesis of Highly Porous Carbon from Rice Husk
Liang, Y., Yang, C., Dong, H., Li, W., Hu, H., Xiao, Y., Zheng, M., & Liu, Y. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01315 · Cited by 82
Nowrouzi, M., Younesi, H., & Bahramifar, N. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.080 · Cited by 79
Highly selective CO2 capture by nitrogen enriched porous carbons
Cong, H., Zhang, M., Chen, Y., Chen, K., Hao, Y., Zhao, Y., & Feng, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.052 · Cited by 79
Ma, X., Wu, Y. Q., Fang, M., Liu, B., Chen, R., Shi, R., Wu, Q., Zeng, Z., & Li, L. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106353 · Cited by 77
Shi, Q., Cui, S., Wang, S., Mi, Y., Sun, Q., Wang, S., Shi, C., & Yu, J. (2022) · Energy · doi:10.1016/j.energy.2022.124392 · Cited by 77
Wang, S., Li, W., Zhang, L., Jin, Z., & Lu, A. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15065h · Cited by 81
Hao, W., Björkman, E. E., Lilliestråle, M., & Hedin, N. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5004569 · Cited by 79
Mukherjee, S., Das, M., Manna, A., Krishna, R., & Das, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08185a · Cited by 77
Performance of dry water- and porous carbon-based sorbents for carbon dioxide capture
Al-Wabel, M. I., Elfaki, J. T., Usman, A. R. A., Hussain, Q., & Ok, Y. S. (2019) · Environmental Research · doi:10.1016/j.envres.2019.04.020 · Cited by 78
Tian, W., Zhang, H., Sun, H., Tadé, M. O., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.139 · Cited by 74
Li, Y., Liu, N., Zhang, T., Wang, B., Wang, Y., Wang, L., & Wei, J. (2020) · Energy · doi:10.1016/j.energy.2020.118561 · Cited by 77
Large-surface-area carbons derived from lotus stem waste for efficient CO2 capture
Wu, X., Zhang, C.-Y., Tian, Z., & Cai, J. (2018) · New Carbon Materials · doi:10.1016/s1872-5805(18)60338-5 · Cited by 79
Characteristics of Activated Carbon
Sinha, P., Banerjee, S., & Kar, K. K. (2020) · Springer series in materials science · doi:10.1007/978-3-030-43009-2_4 · Cited by 77
Superior Capacitive Performance of Hydrochar‐Based Porous Carbons in Aqueous Electrolytes
Fuertes, A. B., & Sevilla, M. (2015) · ChemSusChem · doi:10.1002/cssc.201403267 · Cited by 74
Self-citationSustainable Biomaterials: Current Trends, Challenges and Applications
Gupta, G. K., De, S., Franco, A. M. M., Balu, A. M., & Luque, R. (2015) · Molecules · doi:10.3390/molecules21010048 · Cited by 73
CO2 removal from flue gas with amine-impregnated titanate nanotubes
Guo, L., Yang, J., Hu, G., Hu, X. D., DaCosta, H. F. M., & Fan, M. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.038 · Cited by 73
The development of activated carbon from corncob for CO 2 capture
Wang, X., Zeng, W.-L., Xin, C., Kong, X., Hu, X., & Guo, Q. (2022) · RSC Advances · doi:10.1039/d2ra05979g · Cited by 76
Perspectives on water-facilitated CO 2 capture materials
Wang, J., Wang, S., Xin, Q., & Li, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01297g · Cited by 73
Ji, G., Memon, M. Z., Zhuo, H., & Zhao, M. M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.12.103 · Cited by 72
Nitrogen enriched biochar used as CO2 adsorbents: a brief review
Qiao, Y., & Wu, C. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2021.100018 · Cited by 70
Yang, H., Yuan, Y., & Tsang, S. C. E. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.083 · Cited by 71
Zhu, B., Li, K., Liu, J., Liu, H., Sun, C., Snape, C. E., & Guo, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00438h · Cited by 71
Zhu, D., Li, L., Cai, J., Jiang, M. H., Qi, J., & Zhao, X. (2014) · Carbon · doi:10.1016/j.carbon.2014.08.013 · Cited by 71
Sustainability engineering for the future
Alwi, S. R. W., Manan, Z. A., Klemeš, J. J., & Huisingh, D. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.03.013 · Cited by 71
Tan, P., Xue, D., Zhu, J. B., Jiang, Y., He, Q., Hou, Z., Liu, X., & Sun, L. (2018) · AIChE Journal · doi:10.1002/aic.16357 · Cited by 71
Advances on CO2 storage. Synthetic porous solids, mineralization and alternative solutions
Assen, A. H., Belmabkhout, Y., Adil, K., Lachehab, A., Hassoune, H., & Aggarwal, H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129569 · Cited by 77
Porous carbon materials for CO2 capture, storage and electrochemical conversion
Kim, C., Talapaneni, S. N., & Dai, L. (2023) · Materials Reports Energy · doi:10.1016/j.matre.2023.100199 · Cited by 111
Li, T., An, X., & Fu, D. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00941 · Cited by 71
Review and analysis of porous adsorbents for effective CO2 capture
Foorginezhad, S., Weiland, F., Chen, Y., Hussain, S., & Ji, X. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115589 · Cited by 79
Patiño, J., Gutiérrez, M. C., Carriazo, D., Ania, C. O., Fierro, J. L. G., Ferrer, M. L., & del Monte, F. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00562g · Cited by 71
Liu, F., Yu, R., & Guo, M. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0465-8 · Cited by 70
New strategy to prepare ultramicroporous carbon by ionic activation for superior CO2 capture
Liu, Z., Zhang, Z., Jia, Z., Zhao, L., Zhang, T., Xing, W., Komarneni, S., Subhan, F., & Yan, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.184 · Cited by 75
Hyperporous Carbon from Triptycene‐Based Hypercrosslinked Polymer for Iodine Capture
Zhang, Q., Zhai, T., Wang, Z., Cheng, G., Ma, H., Zhang, Q., Zhao, Y., Tan, B., & Zhang, C. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900249 · Cited by 73
Mallesh, D., Anbarasan, J., Mahesh Kumar, P., Upendar, K., Chandrashekar, P., Rao, B. V. S. K., & Lingaiah, N. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147226 · Cited by 70
Preparation of biomass-derived porous carbons by a facile method and application to CO2 adsorption
Li, Q., Liu, S., Peng, W., Zhu, W., Wang, L., Chen, F., Shao, J., & Hu, X. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.11.001 · Cited by 70
Kinetic and mechanistic study of CO2 adsorption on activated hydrochars
Vega, M. F., Díaz-Faes, E., & Barriocanal, C. (2024) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2024.102716 · Cited by 91
Schaefer, S., Fierro, V., Izquierdo, M. T., & Celzard, A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.086 · Cited by 74
“Indeed, according to several authors, these materials have a high potential for gas sorption and especially for carbon dioxide or hydrogen adsorption [23, 24].”
BackgroundImidazole-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Sang, Y., & Huang, J. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.08.025 · Cited by 69
Park, J., Jung, M., Jang, H., Lee, K., Attia, N. F., & Oh, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08603f · Cited by 73
Bai, J., Huang, J., Jiang, Q., Jiang, W., Demir, M., Kılıç, M., Altay, B. N., Wang, L., & Hu, X. D. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.131916 · Cited by 70
Du, S., Wu, Y., Wang, X., Xia, Q., Xiao, J., Zhou, X. G., & Li, Z. (2020) · AIChE Journal · doi:10.1002/aic.16231 · Cited by 69
A Database of Porous Rigid Amorphous Materials
Thyagarajan, R., & Sholl, D. S. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c03057 · Cited by 70
Zhang, Y., Sun, J., Tan, J., Ma, C., Luo, S., Li, W. H., & Liu, S. (2021) · Fuel · doi:10.1016/j.fuel.2021.121622 · Cited by 69
Recent Progress on Emerging Applications of Hydrochar
Islam, M. T., Sultana, A. I., Chambers, C., Saha, S., Saha, N., Kirtania, K., & Reza, M. T. (2022) · Energies · doi:10.3390/en15249340 · Cited by 82
Human hair-derived nitrogen and sulfur co-doped porous carbon materials for gas adsorption
Zhao, Z.-Q., Xiao, P.-W., Zhao, L., Liu, Y., & Han, B.-H. (2015) · RSC Advances · doi:10.1039/c5ra15690d · Cited by 68
Kwiatkowski, M., Policicchio, A., Seredych, M., & Bandosz, T. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.11.019 · Cited by 70
Effect of metal oxides modification on CO2 adsorption performance over mesoporous carbon
Li, M., Huang, K., Schott, J. A., Wu, Z., & Dai, S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.033 · Cited by 68
Metadata
- Authors
- Sevilla, M., & Fuertes, A. B.
- Affiliations
- Instituto Nacional del Carbón (ES)
- Corresponding author
- Fuertes, Antonio B.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1765
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2055738871
- Cited by
- 1,088
- References
- 28
- Citations by year
- 2026: 83 · 2025: 59 · 2024: 60 · 2023: 80 · 2022: 79 · 2021: 76 · 2020: 82 · 2019: 79 · 2018: 86 · 2017: 74 · 2016: 78 · 2015: 84 · 2014: 73 · 2013: 56 · 2012: 31
- FWCI
- 95.15
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Energy & Environmental Science (publishedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- porous carbon, CO2 capture, CO2 adsorption, chemical activation, KOH activation, hydrothermal carbonization, starch, cellulose, sawdust, biomass-derived carbon, micropores, CO2/N2 separation, adsorption kinetics, adsorbent regeneration, sustainable carbon materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.