The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Abstract
Sulfur (S) encapsulated in porous carbon nanofibers (CNFs) was synthesized viaelectrospinning, carbonization and solution-based chemical reaction–deposition method. The chemical reaction–deposition strategy provides intimate contact between the S and the CNFs. This would not necessarily be the case for other reported methods, such as ball milling and thermal treatment. These novel porous carbon nanofiber–sulfur (CNF–S) nanocomposites with various S loadings showed high reversible capacity, good discharge capacity retention and enhanced rate capability when they were used as cathodes in rechargeable Li/S cells. We demonstrated here that an electrode prepared from a porous CNF–S nanocomposite with 42 wt% S maintains a stable discharge capacity of about 1400 mA h g−1 at 0.05 C, 1100 mA h g−1 at 0.1 C and 900 mA h g−1 at 0.2 C. We attribute the good electrochemical performance to the high electrical conductivity and the extremely high surface area of the CNFs that homogeneously disperse and immobilize S on their porous structures, alleviating the polysulfide shuttle phenomenon. SEM measurements showed that the porous CNF structures remained nearly unchanged even after 30 cycles' discharging/charging at 0.05 C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Self-citationJi, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Yang, X., Wan, Y., Zheng, Y., He, F., Yu, Z., Huang, J., Wang, H., Ok, Y. S., Jiang, Y., & Gao, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.119 · Cited by 1,527
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
Self-citationZhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Liu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Li, W., Zhang, Q., Zheng, G., Seh, Z. W., Yao, H., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403130h · Cited by 654
Li, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Li, G., Li, G., Ye, S., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 528
Controlling SEI Formation on SnSb‐Porous Carbon Nanofibers for Improved Na Ion Storage
Ji, L., Gu, M., Shao, Y., Li, X., Engelhard, M. H., Arey, B. W., Wang, W., Nie, Z., Xiao, J., Wang, C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201304962 · Cited by 489
Self-citationYin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Griebel, J. J., Glass, R. S., Char, K., & Pyun, J. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.04.003 · Cited by 446
Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201080 · Cited by 435
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8278 · Cited by 428
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
Metal–Organic Frameworks for High Charge–Discharge Rates in Lithium–Sulfur Batteries
Jiang, H., Liu, X., Wu, Y., Shu, Y., Gong, X., Ke, F., & Deng, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712872 · Cited by 399
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Self-citationLi, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Chen, J.-J., Yuan, R.-M., Feng, J.-M., Zhang, Q., Huang, J.-X., Fu, G., Zheng, M.-S., Ren, B., & Dong, Q.-F. (2015) · Chemistry of Materials · doi:10.1021/cm5044667 · Cited by 372
Nanomaterials: Science and applications in the lithium–sulfur battery
Ma, L., Hendrickson, K. E., Wei, S., & Archer, L. A. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.011 · Cited by 359
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Self-citationZhang, L., Ji, L., Glans, P.-A., Zhang, Y., Zhu, J., & Guo, J. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42866k · Cited by 333
Self-citationHigh-rate lithium–sulfur batteries promoted by reduced graphene oxide coating
Li, N., Zheng, M., Lu, H., Hu, Z., Shen, C., Chang, X., Ji, G., Cao, J., & Shi, Y. (2012) · Chemical Communications · doi:10.1039/c2cc17912a · Cited by 331
Lu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
Xu, N., Qian, T., Liu, X., Liu, J., Chen, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04610 · Cited by 319
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Facile synthesis of Li2S–polypyrrole composite structures for high-performance Li2S cathodes
Seh, Z. W., Wang, H., Hsu, P.-C., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43395a · Cited by 311
Insight into the Effect of Boron Doping on Sulfur/Carbon Cathode in Lithium–Sulfur Batteries
Yang, C.-P., Yin, Y.-X., Ye, H., Jiang, K.-C., Zhang, J., & Guo, Y.-G. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501627f · Cited by 310
Nanostructured Li2S–C Composites as Cathode Material for High-Energy Lithium/Sulfur Batteries
Cai, K., Song, M.-K., Cairns, E. J., & Zhang, Y. (2012) · Nano Letters · doi:10.1021/nl303965a · Cited by 307
Self-citationRecent advances in energy materials by electrospinning
Liu, Q., Zhu, J., Zhang, L., & Qiu, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.281 · Cited by 306
Peng, S., Li, L., Kong Yoong Lee, J., Tian, L., Srinivasan, M., Adams, S., & Ramakrishna, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.001 · Cited by 304
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
A Review on Li-S Batteries as a High Efficiency Rechargeable Lithium Battery
Barghamadi, M., Kapoor, A., & Wen, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.096308jes · Cited by 299
Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296
Nanostructured positive electrode materials for post-lithium ion batteries
Wang, F., Wu, X., Li, C., Zhu, Y., Fu, L., Wu, Y., & Liu, X. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02070d · Cited by 293
Zheng, B., Lin, X., Zhang, X., Wu, D., & Matyjaszewski, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907006 · Cited by 291
Zhang, J., Xiang, J., Dong, Z., Liu, Y., Wu, Y., Xu, C., & Du, G. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.035 · Cited by 288
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie · doi:10.1002/ange.201205292 · Cited by 284
Electrospinning of ceramic nanofibers: Fabrication, assembly and applications
Wu, H., Pan, W., Lin, D., & Li, H. (2012) · Journal of Advanced Ceramics · doi:10.1007/s40145-012-0002-4 · Cited by 284
Xu, G., Ding, B., Shen, L., Nie, P., Han, J., & Zhang, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00004d · Cited by 284
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Electrospun hollow nanofibers for advanced secondary batteries
Li, L., Peng, S., Lee, J. K. Y., Ji, D., Srinivasan, M., & Ramakrishna, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.050 · Cited by 267
Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Li, M., Carter, R., Douglas, A., Oakes, L., & Pint, C. L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01437 · Cited by 254
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
Zhang, Y., Gao, Z., Song, N., & Li, X. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.11.099 · Cited by 192
Self-citationMicroporous carbon nanosheets derived from corncobs for lithium–sulfur batteries
Guo, J., Zhang, J., Jiang, F., Zhao, S., Su, Q., & Du, G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.077 · Cited by 175
Metadata
- Authors
- Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 12
- Pages
- 5053
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2134968882
- Cited by
- 602
- References
- 49
- FWCI
- 31.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.