The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
The effect of water adsorption on the structure of the carboxylate containing metal–organic frameworks Cu-BTC, Mg-MOF-74, and UiO-66
Abstract
Metal–organic frameworks (MOFs) with metal–carboxylate bonds, including Cu-BTC (HKUST-1), Mg-MOF-74 (Mg/DOBDC), and UiO-66, have been shown to have varying degrees of water stability. The three MOFs in this study are three of the most highly studied MOFs in the literature. We investigate here how each MOF degrades at several temperature and humidity conditions over the course of 28 days. At conditions of 90% relative humidity (RH) and 25 °C, water uptake for Cu-BTC is shown to be higher than at 90% RH and 40 °C, causing the degradation of the inner structure of Cu-BTC to occur more readily at the lower temperature. However the external surfaces of Cu-BTC degrade more readily, as shown through SEM images, at conditions of 90% RH and 40 °C. Mg-MOF-74 has a nearly complete loss of surface area after just one day of exposure to each of the conditions studied, however the PXRD patterns show only a change in the [100] peak. We offer here a novel mechanism for the degradation of Mg-MOF-74, involving a 6-coordinate Mg intermediate, which leaves the 1-dimensional channels of Mg-MOF-74 intact. Furthermore, we conclude that UiO-66 is stable to each of the aging conditions for the full 28 days of this study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Luminescent Functional Metal–Organic Frameworks
Cui, Y., Yue, Y., Qian, G., & Chen, B. (2012) · Chemical Reviews · doi:10.1021/cr200101d · Cited by 5,697
Rod Packings and Metal−Organic Frameworks Constructed from Rod-Shaped Secondary Building Units
Rosi, N. L., Kim, J., Eddaoudi, M., Chen, B., O'Keeffe, M., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja045123o · Cited by 2,496
Metal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325
A Rationale for the Large Breathing of the Porous Aluminum Terephthalate (MIL‐53) Upon Hydration
Loiseau, T., Serre, C., Huguenard, C., Fink, G., Taulelle, F., Henry, M., Bataille, T., & Férey, G. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305413 · Cited by 2,166
Synthesis and Stability of Tagged UiO-66 Zr-MOFs
Kandiah, M., Nilsen, M. H., Usseglio, S., Jakobsen, S., Olsbye, U., Tilset, M., Larabi, C., Quadrelli, E. A., Bonino, F., & Lillerud, K. P. (2010) · Chemistry of Materials · doi:10.1021/cm102601v · Cited by 2,031
Valenzano, L., Civalleri, B., Chavan, S., Bordiga, S., Nilsen, M. H., Jakobsen, S., Lillerud, K. P., & Lamberti, C. (2011) · Chemistry of Materials · doi:10.1021/cm1022882 · Cited by 1,919
Cited by
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Function-led design of new porous materials
Slater, A. G., & Cooper, A. I. (2015) · Science · doi:10.1126/science.aaa8075 · Cited by 1,663
From fundamentals to applications: a toolbox for robust and multifunctional MOF materials
Kirchon, A., Feng, L., Drake, H. F., Joseph, E. A., & Zhou, H.-C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00688a · Cited by 1,448
Hadjiivanov, K. I., Panayotov, D. A., Mihaylov, M. Y., Ivanova, E. Z., Chakarova, K. K., Andonova, S. M., & Drenchev, N. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00487 · Cited by 1,278
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Metal–Organic Frameworks for Air Purification of Toxic Chemicals
DeCoste, J. B., & Peterson, G. W. (2014) · Chemical Reviews · doi:10.1021/cr4006473 · Cited by 958
Self-citationMetal–Organic Frameworks for Water Harvesting from Air
Kalmutzki, M. J., Diercks, C. S., & Yaghi, O. M. (2018) · Advanced Materials · doi:10.1002/adma.201704304 · Cited by 772
Destruction of Metal–Organic Frameworks: Positive and Negative Aspects of Stability and Lability
Feng, L., Wang, K.-Y., Day, G. S., Ryder, M. R., & Zhou, H.-C. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00722 · Cited by 662
Potential of microporous metal–organic frameworks for separation of hydrocarbon mixtures
Bao, Z., Chang, G., Xing, H., Krishna, R., Ren, Q., & Chen, B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01886f · Cited by 647
Water and Metal–Organic Frameworks: From Interaction toward Utilization
Liu, X., Wang, X., & Kapteijn, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00746 · Cited by 614
High valence 3p and transition metal based MOFs
Devic, T., & Serre, C. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00081a · Cited by 605
Zhao, J., Wang, Y.-N., Dong, W.-W., Wu, Y.-P., Li, D.-S., & Zhang, Q.-C. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b02294 · Cited by 564
UiO-66 metal–organic frameworks in water treatment: A critical review
Ahmadijokani, F., Molavi, H., Rezakazemi, M., Tajahmadi, S., Bahi, A., Ko, F., Aminabhavi, T. M., Li, J.-R., & Arjmand, M. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100904 · Cited by 559
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Adsorption-Driven Heat Pumps: The Potential of Metal–Organic Frameworks
de Lange, M. F., Verouden, K. J. F. M., Vlugt, T. J. H., Gascon, J., & Kapteijn, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00059 · Cited by 510
Kumar, S., Jain, S., Nehra, M., Dilbaghi, N., Marrazza, G., & Kim, K.-H. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213407 · Cited by 498
To, J. W. F., He, J., Mei, J., Haghpanah, R., Chen, Z., Kurosawa, T., Chen, S., Bae, W.-G., Pan, L., Tok, J. B.-H., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11955 · Cited by 475
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Vellingiri, K., Kumar, P., Deep, A., & Kim, K.-H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.012 · Cited by 368
Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Application of QD-MOF composites for photocatalysis: Energy production and environmental remediation
Wu, T., Liu, X., Liu, Y., Cheng, M., Liu, Z., Zeng, G., Shao, B., Liang, Q., Zhang, W., He, Q., et al. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213097 · Cited by 347
Molavi, H., Hakimian, A., Shojaei, A., & Raeiszadeh, M. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.189 · Cited by 337
A new MOF-505@GO composite with high selectivity for CO2/CH4 and CO2/N2 separation
Chen, Y., Lv, D., Wu, J., Xiao, J., Xi, H., Xia, Q., & Li, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.138 · Cited by 325
Deng, X., Li, R., Wu, S., Wang, L., Hu, J., Ma, J., Jiang, W., Zhang, N., Zheng, X., Gao, C., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06239 · Cited by 322
Connolly, B. M., Aragones-Anglada, M., Gandara-Loe, J., Danaf, N. A., Lamb, D. C., Mehta, J. P., Vulpe, D., Wuttke, S., Silvestre-Albero, J., Moghadam, P. Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10185-1 · Cited by 315
Multicomponent isoreticular metal-organic frameworks: Principles, current status and challenges
Dutta, A., Pan, Y., Liu, J.-Q., & Kumar, A. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214074 · Cited by 306
Metal–organic frameworks (MOFs): potential and challenges for capture and abatement of ammonia
Vikrant, K., Kumar, V., Kim, K.-H., & Kukkar, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07847a · Cited by 299
Hierarchically porous metal–organic frameworks: synthetic strategies and applications
Feng, L., Wang, K.-Y., Lv, X.-L., Yan, T.-H., & Zhou, H.-C. (2020) · National Science Review · doi:10.1093/nsr/nwz170 · Cited by 290
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Understanding and controlling water stability of MOF-74
Zuluaga, S., Fuentes-Fernandez, E. M. A., Tan, K., Xu, F., Li, J., Chabal, Y. J., & Thonhauser, T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10416e · Cited by 270
Zhang, Z., Nguyen, H. T. H., Miller, S. A., Ploskonka, A. M., DeCoste, J. B., & Cohen, S. M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11034 · Cited by 259
Self-citationJasuja, H., Peterson, G. W., Decoste, J. B., Browe, M. A., & Walton, K. S. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.08.050 · Cited by 256
Self-citationZhan, G., & Zeng, H. C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505380 · Cited by 254
Abdi, J., Sisi, A. J., Hadipoor, M., & Khataee, A. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127558 · Cited by 144
Metadata
- Authors
- DeCoste, J. B., Peterson, G. W., Schindler, B. J., Killops, K. L., Browe, M. A., & Mahle, J. J.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 38
- Pages
- 11922
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2127249782
- Cited by
- 591
- References
- 38
- FWCI
- 15.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.