The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
The effect of water adsorption on the structure of the carboxylate containing metal–organic frameworks Cu-BTC, Mg-MOF-74, and UiO-66
Abstract
Metal–organic frameworks (MOFs) with metal–carboxylate bonds, including Cu-BTC (HKUST-1), Mg-MOF-74 (Mg/DOBDC), and UiO-66, have been shown to have varying degrees of water stability. The three MOFs in this study are three of the most highly studied MOFs in the literature. We investigate here how each MOF degrades at several temperature and humidity conditions over the course of 28 days. At conditions of 90% relative humidity (RH) and 25 °C, water uptake for Cu-BTC is shown to be higher than at 90% RH and 40 °C, causing the degradation of the inner structure of Cu-BTC to occur more readily at the lower temperature. However the external surfaces of Cu-BTC degrade more readily, as shown through SEM images, at conditions of 90% RH and 40 °C. Mg-MOF-74 has a nearly complete loss of surface area after just one day of exposure to each of the conditions studied, however the PXRD patterns show only a change in the [100] peak. We offer here a novel mechanism for the degradation of Mg-MOF-74, involving a 6-coordinate Mg intermediate, which leaves the 1-dimensional channels of Mg-MOF-74 intact. Furthermore, we conclude that UiO-66 is stable to each of the aging conditions for the full 28 days of this study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Luminescent Functional Metal–Organic Frameworks
Cui, Y., Yue, Y., Qian, G., & Chen, B. (2012) · Chemical Reviews · doi:10.1021/cr200101d · Cited by 5,697
Rod Packings and Metal−Organic Frameworks Constructed from Rod-Shaped Secondary Building Units
Rosi, N. L., Kim, J., Eddaoudi, M., Chen, B., O'Keeffe, M., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja045123o · Cited by 2,496
Metal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325
A Rationale for the Large Breathing of the Porous Aluminum Terephthalate (MIL‐53) Upon Hydration
Loiseau, T., Serre, C., Huguenard, C., Fink, G., Taulelle, F., Henry, M., Bataille, T., & Férey, G. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305413 · Cited by 2,166
Synthesis and Stability of Tagged UiO-66 Zr-MOFs
Kandiah, M., Nilsen, M. H., Usseglio, S., Jakobsen, S., Olsbye, U., Tilset, M., Larabi, C., Quadrelli, E. A., Bonino, F., & Lillerud, K. P. (2010) · Chemistry of Materials · doi:10.1021/cm102601v · Cited by 2,031
Valenzano, L., Civalleri, B., Chavan, S., Bordiga, S., Nilsen, M. H., Jakobsen, S., Lillerud, K. P., & Lamberti, C. (2011) · Chemistry of Materials · doi:10.1021/cm1022882 · Cited by 1,919
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Modulated Synthesis of Zr‐Based Metal–Organic Frameworks: From Nano to Single Crystals
Schaate, A., Roy, P., Godt, A., Lippke, J., Waltz, F., Wiebcke, M., & Behrens, P. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201003211 · Cited by 1,701
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
Dybtsev, D. N., Chun, H., & Kim, K. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460712 · Cited by 1,208
Characterization of metal-organic frameworks by water adsorption
Küsgens, P., Rose, M., Senkovska, I., Fröde, H., Henschel, A., Siegle, S., & Kaskel, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.020 · Cited by 1,093
Walton, K. S., & Snurr, R. Q. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071174k · Cited by 1,029
Metal-organic frameworks with high capacity and selectivity for harmful gases
Britt, D., Tranchemontagne, D., & Yaghi, O. M. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0804900105 · Cited by 958
Postsynthetic Ligand and Cation Exchange in Robust Metal–Organic Frameworks
Kim, M., Cahill, J. F., Fei, H., Prather, K. A., & Cohen, S. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3079219 · Cited by 809
Prestipino, C., Regli, L., Vitillo, J. G., Bonino, F., Damin, A., Lamberti, C., Zecchina, A., Solari, P. L., Kongshaug, K. O., & Bordiga, S. (2006) · Chemistry of Materials · doi:10.1021/cm052191g · Cited by 761
DeCoste, J. B., Peterson, G. W., Jasuja, H., Glover, T. G., Huang, Y.-G., & Walton, K. S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10662d · Cited by 714
Self-citationSynthesis, morphology control, and properties of porous metal–organic coordination polymers
Huang, L. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00609-1 · Cited by 675
Tuning the Adsorption Properties of UiO-66 via Ligand Functionalization
Cmarik, G. E., Kim, M., Cohen, S. M., & Walton, K. S. (2012) · Langmuir · doi:10.1021/la3035352 · Cited by 638
MOF-74 building unit has a direct impact on toxic gas adsorption
Grant Glover, T., Peterson, G. W., Schindler, B. J., Britt, D., & Yaghi, O. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.10.002 · Cited by 617
Self-citationHigh-Capacity Hydrogen and Nitric Oxide Adsorption and Storage in a Metal−Organic Framework
Xiao, B., Wheatley, P. S., Zhao, X., Fletcher, A. J., Fox, S., Rossi, A. G., Megson, I. L., Bordiga, S., Regli, L., Thomas, K. M., et al. (2007) · Journal of the American Chemical Society · doi:10.1021/ja066098k · Cited by 612
Effect of Water Adsorption on Retention of Structure and Surface Area of Metal–Organic Frameworks
Schoenecker, P. M., Carson, C. G., Jasuja, H., Flemming, C. J. J., & Walton, K. S. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202325p · Cited by 557
Stability and Hydrolyzation of Metal Organic Frameworks with Paddle-Wheel SBUs upon Hydration
Tan, K., Nijem, N., Canepa, P., Gong, Q., Li, J., Thonhauser, T., & Chabal, Y. J. (2012) · Chemistry of Materials · doi:10.1021/cm301427w · Cited by 475
Kizzie, A. C., Wong-Foy, A. G., & Matzger, A. J. (2011) · Langmuir · doi:10.1021/la200547k · Cited by 473
Postsynthetic ligand exchange as a route to functionalization of ‘inert’ metal–organic frameworks
Kim, M., Cahill, J. F., Su, Y., Prather, K. A., & Cohen, S. M. (2012) · Chem. Sci. · doi:10.1039/c1sc00394a · Cited by 455
Discovery, development, and functionalization of Zr(iv)-based metal–organic frameworks
Kim, M., & Cohen, S. M. (2012) · CrystEngComm · doi:10.1039/c2ce06491j · Cited by 312
Enhanced Stability of Cu-BTC MOF via Perfluorohexane Plasma-Enhanced Chemical Vapor Deposition
Decoste, J. B., Peterson, G. W., Smith, M. W., Stone, C. A., & Willis, C. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211182m · Cited by 273
Self-citationAmmonia Vapor Removal by Cu3(BTC)2 and Its Characterization by MAS NMR
Peterson, G. W., Wagner, G. W., Balboa, A., Mahle, J., Sewell, T., & Karwacki, C. J. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp902736z · Cited by 234
Self-citationJasuja, H., Huang, Y.-G., & Walton, K. S. (2012) · Langmuir · doi:10.1021/la304151r · Cited by 210
Stability Effects on CO2 Adsorption for the DOBDC Series of Metal–Organic Frameworks
Liu, J., Benin, A. I., Furtado, A. M. B., Jakubczak, P., Willis, R. R., & LeVan, M. D. (2011) · Langmuir · doi:10.1021/la201774x · Cited by 204
Kinetic Water Stability of an Isostructural Family of Zinc-Based Pillared Metal–Organic Frameworks
Jasuja, H., Burtch, N. C., Huang, Y.-G., Cai, Y., & Walton, K. S. (2013) · Langmuir · doi:10.1021/la304204k · Cited by 185
Gul‐E‐Noor, F., Jee, B., Pöppl, A., et al. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02848g · Cited by 170
Peterson, G. W., DeCoste, J. B., Glover, T. G., Huang, Y., Jasuja, H., & Walton, K. S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.02.025 · Cited by 166
Self-citationSelective Dynamic CO2 Separations on Mg-MOF-74 at Low Pressures: A Detailed Comparison with 13X
Rémy, T., Peter, S. A., der Perre, S. V., Valvekens, P., Vos, D. E. D., Baron, G. V., & Denayer, J. F. M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp401923v · Cited by 92
Gurunatha, K. L., & Maji, T. K. (2009) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200801153 · Cited by 16
Cited by
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Function-led design of new porous materials
Slater, A. G., & Cooper, A. I. (2015) · Science · doi:10.1126/science.aaa8075 · Cited by 1,663
From fundamentals to applications: a toolbox for robust and multifunctional MOF materials
Kirchon, A., Feng, L., Drake, H. F., Joseph, E. A., & Zhou, H.-C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00688a · Cited by 1,448
Hadjiivanov, K. I., Panayotov, D. A., Mihaylov, M. Y., Ivanova, E. Z., Chakarova, K. K., Andonova, S. M., & Drenchev, N. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00487 · Cited by 1,278
Metadata
- Authors
- DeCoste, J. B., Peterson, G. W., Schindler, B. J., Killops, K. L., Browe, M. A., & Mahle, J. J.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 38
- Pages
- 11922
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2127249782
- Cited by
- 591
- References
- 38
- FWCI
- 15.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.