The DOI matches its Crossref record; 122 of the 122 references it cites were found in a registry or an index.
Biodegradable metallic bone implants
Abstract
This review summarizes the current research status on biodegradable metals as bone implants, including their biodegradability, mechanical properties, and biocompatibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Di Nicola, M., Carlo-Stella, C., Magni, M., Milanesi, M., Longoni, P. D., Matteucci, P., Grisanti, S., & Gianni, A. M. (2002) · Blood · doi:10.1182/blood.v99.10.3838 · Cited by 3,226
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
In vitro and in vivo corrosion measurements of magnesium alloys
Witte, F., Fischer, J., Nellesen, J., Crostack, H.-A., Kaese, V., Pisch, A., Beckmann, F., & Windhagen, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.037 · Cited by 1,386
Saris, N.-E. L., Mervaala, E., Karppanen, H., Khawaja, J. A., & Lewenstam, A. (2000) · Clinica Chimica Acta · doi:10.1016/s0009-8981(99)00258-2 · Cited by 1,366
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
Research on an Mg–Zn alloy as a degradable biomaterial
Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.028 · Cited by 1,336
Trace elements in human physiology and pathology: zinc and metallothioneins
Tapiero, H., & Tew, K. D. (2003) · Biomedicine & Pharmacotherapy · doi:10.1016/s0753-3322(03)00081-7 · Cited by 1,298
Recent advances on the development of magnesium alloys for biodegradable implants
Chen, Y., Xu, Z., Smith, C., & Sankar, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.005 · Cited by 1,236
Agarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
Kirkland, N. T., Birbilis, N., & Staiger, M. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.014 · Cited by 856
Bone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
Self-citationVojtěch, D., Kubásek, J., Šerák, J., & Novák, P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.05.008 · Cited by 708
Stress shielding and bone resorption in shoulder arthroplasty
Nagels, J., Stokdijk, M., & Rozing, P. M. (2003) · Journal of Shoulder and Elbow Surgery · doi:10.1067/mse.2003.22 · Cited by 707
Xu, Q., Hashimoto, M., Dang, T. T., Hoare, T., Kohane, D. S., Whitesides, G. M., Langer, R., & Anderson, D. G. (2009) · Small · doi:10.1002/smll.200801855 · Cited by 602
Feyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Drücker, H., Vogt, C., & Hort, N. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.024 · Cited by 598
A review on magnesium alloys as biodegradable materials
Gu, X.-N., & Zheng, Y.-F. (2010) · Frontiers of Materials Science in China · doi:10.1007/s11706-010-0024-1 · Cited by 598
Cytotoxicity evaluation of 43 metal salts using murine fibroblasts and osteoblastic cells
Yamamoto, A., Honma, R., & Sumita, M. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199802)39:2<331::aid-jbm22>3.0.co;2-e · Cited by 569
A review on in situ phytoremediation of mine tailings
Wang, L., Ji, B., Hu, Y., Liu, R., & Sun, W. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.06.025 · Cited by 527
Windhagen, H., Radtke, K., Weizbauer, A., Diekmann, J., Noll, Y., Kreimeyer, U., Schavan, R., Stukenborg-Colsman, C., & Waizy, H. (2013) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-12-62 · Cited by 521
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
Li, H. F., Xie, X. H., Zheng, Y. F., Cong, Y., Zhou, F. Y., Qiu, K. J., Wang, X., Chen, S. H., Huang, L., Tian, L., et al. (2015) · Scientific Reports · doi:10.1038/srep10719 · Cited by 515
Xu, L., Pan, F., Yu, G., Yang, L., Zhang, E., & Yang, K. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.001 · Cited by 505
A Possible Biodegradable Magnesium Implant Material
Song, G., & Song, S. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200600252 · Cited by 487
Gu, X. N., Xie, X. H., Li, N., Zheng, Y. F., & Qin, L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.02.018 · Cited by 478
Mostaed, E., Sikora-Jasinska, M., Mostaed, A., Loffredo, S., Demir, A. G., Previtali, B., Mantovani, D., Beanland, R., & Vedani, M. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.03.018 · Cited by 475
Li, L., Gao, J., & Wang, Y. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.01.004 · Cited by 441
In vivo corrosion and corrosion protection of magnesium alloy LAE442☆
Witte, F., Fischer, J., Nellesen, J., Vogt, C., Vogt, J., Donath, T., & Beckmann, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.012 · Cited by 438
Castellani, C., Lindtner, R. A., Hausbrandt, P., Tschegg, E., Stanzl-Tschegg, S. E., Zanoni, G., Beck, S., & Weinberg, A.-M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.08.020 · Cited by 436
Progress of biodegradable metals
Li, H., Zheng, Y., & Qin, L. (2014) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2014.08.014 · Cited by 432
Biodegradable Materials for Bone Repairs: A Review
Tan, L., Yu, X., Wan, P., & Yang, K. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.03.002 · Cited by 431
Jin, G., Qin, H., Cao, H., Qian, S., Zhao, Y., Peng, X., Zhang, X., Liu, X., & Chu, P. K. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.074 · Cited by 406
Liu, B., & Zheng, Y. F. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.001 · Cited by 396
Electrodeposition of Ca–P coatings on biodegradable Mg alloy: In vitro biomineralization behavior☆
Song, Y., Zhang, S., Li, J., Zhao, C., & Zhang, X. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.020 · Cited by 385
Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies☆
Hermawan, H., Purnama, A., Dube, D., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.025 · Cited by 372
Hänzi, A. C., Gerber, I., Schinhammer, M., Löffler, J. F., & Uggowitzer, P. J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.008 · Cited by 365
Kubásek, J., Vojtěch, D., Jablonská, E., Pospíšilová, I., Lipov, J., & Ruml, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.08.015 · Cited by 360
Wang, H. X., Guan, S. K., Wang, X., Ren, C. X., & Wang, L. G. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.009 · Cited by 359
In vivo study of magnesium plate and screw degradation and bone fracture healing
Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B. J., Chou, D.-T., Pal, S., Maiti, S., Kumta, P. N., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.010 · Cited by 359
Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents
Hermawan, H., Dube, D., & Mantovani, D. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32224 · Cited by 332
Neuropathology of aluminum toxicity in rats (glutamate and GABA impairment)
El-Rahman, S. (2003) · Pharmacological Research · doi:10.1016/s1043-6618(02)00336-5 · Cited by 321
In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg–Zn alloy
Zhang, S., Li, J., Song, Y., Zhao, C., Zhang, X., Xie, C., Zhang, Y., Tao, H., He, Y., Jiang, Y., et al. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2009.03.001 · Cited by 318
Li, H., Yang, H., Zheng, Y., Zhou, F., Qiu, K., & Wang, X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.089 · Cited by 296
Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Iron–manganese: new class of metallic degradable biomaterials prepared by powder metallurgy
Hermawan, H., Alamdari, H., Mantovani, D., & Dubé, D. (2008) · Powder Metallurgy · doi:10.1179/174329008x284868 · Cited by 287
Bornapour, M., Muja, N., Shum-Tim, D., Cerruti, M., & Pekguleryuz, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.045 · Cited by 287
Zhang, E., Yang, L. J., Xu, J., & Chen, H. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.024 · Cited by 282
Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
Niu, J., Tang, Z., Huang, H., Pei, J., Zhang, H., Yuan, G., & Ding, W. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.082 · Cited by 280
Endothelial Cellular Responses to Biodegradable Metal Zinc
Ma, J., Zhao, N., & Zhu, D. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00319 · Cited by 275
Gong, H., Wang, K., Strich, R., & Zhou, J. G. (2015) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33341 · Cited by 264
In vivo evaluation of biodegradable magnesium alloy bone implant in the first 6 months implantation
Zhang, E., Xu, L., Yu, G., Pan, F., & Yang, K. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32132 · Cited by 256
Serre, C. M., Papillard, M., Chavassieux, P., Voegel, J. C., & Boivin, G. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19981215)42:4<626::aid-jbm20>3.0.co;2-s · Cited by 252
Biocorrosion behavior of magnesium alloy in different simulated fluids for biomedical application
Yang, L., & Zhang, E. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2009.01.014 · Cited by 250
Antibacterial biodegradable Mg-Ag alloys
Institute for Material Research, H.-Z. G., Tie, D., Feyerabend, F., Müller, W.-D., Schade, R., Liefeith, K., Kainer, K., & Willumeit, R. (2013) · European Cells and Materials · doi:10.22203/ecm.v025a20 · Cited by 250
Comparative in vitro Study on Pure Metals (Fe, Mn, Mg, Zn and W) as Biodegradable Metals
Cheng, J., Liu, B., Wu, Y. H., & Zheng, Y. F. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.03.019 · Cited by 249
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
Liu, X., Sun, J., Qiu, K., Yang, Y., Pu, Z., Li, L., & Zheng, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.116 · Cited by 233
Liu, C., Fu, X., Pan, H., Wan, P., Wang, L., Tan, L., Wang, K., Zhao, Y., Yang, K., & Chu, P. K. (2016) · Scientific Reports · doi:10.1038/srep27374 · Cited by 229
A study on alkaline heat treated Mg–Ca alloy for the control of the biocorrosion rate
Gu, X. N., Zheng, W., Cheng, Y., & Zheng, Y. F. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.01.048 · Cited by 226
Surface modification of biodegradable magnesium and its alloys for biomedical applications
Tian, P., & Liu, X. (2015) · Regenerative Biomaterials · doi:10.1093/rb/rbu013 · Cited by 218
Cytotoxicity evaluation of biodegradable Zn–3Mg alloy toward normal human osteoblast cells
Murni, N. S., Dambatta, M. S., Yeap, S. K., Froemming, G. R. A., & Hermawan, H. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.01.056 · Cited by 218
Xiao, C., Wang, L., Ren, Y., Sun, S., Zhang, E., Yan, C., Liu, Q., Sun, X., Shou, F., Duan, J., et al. (2018) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.01.006 · Cited by 204
Carbon nanotube, graphene and boron nitride nanotube reinforced bioactive ceramics for bone repair
Gao, C., Feng, P., Peng, S., & Shuai, C. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.020 · Cited by 203
Self-citationHiromoto, S., Inoue, M., Taguchi, T., Yamane, M., & Ohtsu, N. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.026 · Cited by 201
Preparation and properties of high purity Mg–Y biomaterials
Peng, Q., Huang, Y., Zhou, L., Hort, N., & Kainer, K. U. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.065 · Cited by 187
Moravej, M., Purnama, A., Fiset, M., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.008 · Cited by 184
Nazarzadeh Zare, E., Mansour Lakouraj, M., & Mohseni, M. (2014) · Synthetic Metals · doi:10.1016/j.synthmet.2013.09.045 · Cited by 181
Dziuba, D., Meyer-Lindenberg, A., Seitz, J. M., Waizy, H., Angrisani, N., & Reifenrath, J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.028 · Cited by 179
In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy
Li, J. N., Cao, P., Zhang, X. N., Zhang, S. X., & He, Y. H. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4688-9 · Cited by 177
Liu, C., Xin, Y., Tang, G., & Chu, P. K. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.12.020 · Cited by 176
Liu, X., Sun, J., Yang, Y., Zhou, F., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials Letters · doi:10.1016/j.matlet.2015.07.151 · Cited by 172
You, J., Shao, R., Wei, X., Gupta, S., & Li, C. (2010) · Small · doi:10.1002/smll.201000028 · Cited by 170
Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy
Zomorodian, A., Garcia, M. P., Silva, T. M. E., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.036 · Cited by 156
Shen, C., Liu, X., Fan, B., et al. (2016) · RSC Advances · doi:10.1039/c6ra14300h · Cited by 151
Magnesium-based biodegradable alloys: Degradation, application, and alloying elements
Pogorielov, M., Husak, E., Solodivnik, A., & Zhdanov, S. (2017) · Interventional Medicine and Applied Science · doi:10.1556/1646.9.2017.1.04 · Cited by 150
Hong, D., Saha, P., Chou, D., Lee, B., Collins, B., Tan, Z., Dong, Z., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.07.001 · Cited by 146
Bobe, K., Willbold, E., Morgenthal, I., Andersen, O., Studnitzky, T., Nellesen, J., Tillmann, W., Vogt, C., Vano‐Herrera, K., & Witte, F. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.035 · Cited by 144
Chou, D., Hong, D., Saha, P., Ferrero, J., Lee, B., Tan, Z., Dong, Z., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.025 · Cited by 144
Müeller, W., de Mele, M. F. L., Nascimento, M. L., & Zeddies, M. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32106 · Cited by 144
Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing
Montani, M., Demir, A. G., Mostaed, E., Vedani, M., & Previtali, B. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0100 · Cited by 143
Biofunctionalized anti-corrosive silane coatings for magnesium alloys
Liu, X., Yue, Z., Romeo, T., Weber, J., Scheuermann, T., Moulton, S. E., & Wallace, G. G. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.025 · Cited by 141
Biodegradable Mg corrosion and osteoblast cell culture studies
Yun, Y., Dong, Z., Yang, D., Schulz, M. J., Shanov, V. N., Yarmolenko, S. N., Xu, Z., Kumta, P. N., & Sfeir, C. S. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.02.008 · Cited by 136
On the cytocompatibility of biodegradable Fe-based alloys
Schinhammer, M., Gerber, I., Hänzi, A. C., & Uggowitzer, P. J. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.11.002 · Cited by 135
Fatigue behaviors of HP-Mg, Mg–Ca and Mg–Zn–Ca biodegradable metals in air and simulated body fluid
Bian, D., Zhou, W., Liu, Y., Li, N., Zheng, Y., & Sun, Z. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.05.031 · Cited by 135
Wegener, B., Sievers, B., Utzschneider, S., et al. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.04.017 · Cited by 129
Huang, T., Cheng, J., & Zheng, Y. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.10.023 · Cited by 129
Loher, S. F., Schneider, O., Maienfisch, T., Bokorny, S., & Stark, W. J. (2008) · Small · doi:10.1002/smll.200800047 · Cited by 126
Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
Demir, A. G., Monguzzi, L., & Previtali, B. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.004 · Cited by 125
Light‐Induced Temperature Transitions in Biodegradable Polymer and Nanorod Composites
Hribar, K. C., Metter, R. B., Ifkovits, J. L., Troxler, T., & Burdick, J. A. (2009) · Small · doi:10.1002/smll.200900395 · Cited by 114
Synthesis, microstructure and mechanical properties of porous MgZn scaffolds
Seyedraoufi, Z. S., & Mirdamadi, S. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.01.023 · Cited by 112
Fe–Au and Fe–Ag composites as candidates for biodegradable stent materials
Huang, T., Cheng, J. B., Bian, D., & Zheng, Y. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33389 · Cited by 110
Fluoride Conversion Coating on Biodegradable AZ31B Magnesium Alloy
Yan, T., Tan, L., Zhang, B., & Yang, K. (2014) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2013.12.015 · Cited by 105
An in vivo study on the metabolism and osteogenic activity of bioabsorbable Mg–1Sr alloy
Tie, D., Guan, R., Liu, H. H., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.11.014 · Cited by 105
Han, S., Liu, Y., Nie, X., Xu, Q., Jiao, F., Li, W., Zhao, Y., Wu, Y. F., & Chen, C. (2012) · Small · doi:10.1002/smll.201102280 · Cited by 101
Cheng, J., & Zheng, Y. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32783 · Cited by 97
Tan, L., Wang, Q., Lin, X. Y., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.020 · Cited by 93
Synthesis and characterization of Mg‐Ca‐Sr alloys for biodegradable orthopedic implant applications
Berglund, I. S., Brar, H. S., Dolgova, N. V., Acharya, A. P., Keselowsky, B. G., Sarntinoranont, M., & Manuel, M. V. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32721 · Cited by 92
Ostrowski, N. J., Lee, B., Enick, N., Carlson, B., Kunjukunju, S., Roy, A., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.010 · Cited by 88
Hofstetter, J., Martinelli, E., Pogatscher, S., Schmutz, P., Povoden, E., Weinberg, A., Uggowitzer, P. J., & Löffler, J. F. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.05.004 · Cited by 86
Čapek, J., Kubásek, J., Vojtěch, D., Jablonská, E., Lipov, J., & Ruml, T. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.09.049 · Cited by 83
Levy, G. K., & Aghion, E. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.01.009 · Cited by 68
Biocompatibility and strength retention of biodegradable Mg‐Ca‐Zn alloy bone implants
Cho, S. Y., Chae, S., Choi, K. W., Seok, H. K., Kim, Y. C., Jung, J., Yang, S., Kwon, G. J., Kim, J. T., & Assad, M. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32813 · Cited by 68
Yang, Y., Zheng, K., Liang, R., Mainka, A., Taccardi, N., Roether, J. A., Detsch, R., Goldmann, W. H., Virtanen, S., & Boccaccini, A. R. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa87f2 · Cited by 68
Daud, N. M., Sing, N. B., Yusop, A. H. M., Majid, F. A. A., & Hermawan, H. (2014) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2014.07.001 · Cited by 62
Liang, X., Qi, Y., Pan, Z., He, Y., Liu, X., Cui, S., & Ding, J. (2018) · Materials Chemistry Frontiers · doi:10.1039/c8qm00152a · Cited by 60
Čapek, J., Stehlíková, K., Michalcová, A., Msallamová, Š., & Vojtěch, D. (2016) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2016.06.087 · Cited by 59
Evidences of in vivo bioactivity of Fe‐bioceramic composites for temporary bone implants
Ulum, M. F., Nasution, A. K., Yusop, A. H. M., Arafat, A., Kadir, M. R. A., Juniantito, V., Noviana, D., & Hermawan, H. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33315 · Cited by 57
Wang, S., Xu, Y., Zhou, J., Li, H., Chang, J., & Huan, Z. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.12.001 · Cited by 53
A Biodegradable and Biocompatible Regular Nanopattern for Large‐Scale Selective Cell Growth
Csáderová, L., Martines, E., Seunarine, K., Gadegaard, N., Wilkinson, C. D. W., & Riehle, M. O. (2010) · Small · doi:10.1002/smll.201000193 · Cited by 50
Lin, G., Hu, R., Law, W., Chen, C., Wang, Y., Chin, H. L., Nguyen, Q. T., Lai, C. K., Yoon, H. S., Wang, X., et al. (2013) · Small · doi:10.1002/smll.201201716 · Cited by 47
Wang, J., Xu, J., Liu, W., Li, Y., & Qin, L. (2016) · Scientific Reports · doi:10.1038/srep26341 · Cited by 43
Effects of external stress on biodegradable orthopedic materials: A review
Li, X., Chu, C., & Chu, P. K.-H. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.09.002 · Cited by 34
Yin, G., Yang, X., Zhou, Z. G., & Li, Q. (2018) · Materials Chemistry Frontiers · doi:10.1039/c7qm00600d · Cited by 20
Navigating multipositionality in ‘insider’ ethnography
Vernooij, E. (2017) · Medicine Anthropology Theory · doi:10.17157/mat.4.2.496 · Cited by 11
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Biodegradable magnesium-based implants in orthopedics-a general review and perspectives
Wang, J., Xu, J., Hopkins, C., Chow, D. H., & Qin, L. (2020) · Advanced Science · doi:10.1002/advs.201902443 · Cited by 574
Mg bone implant: Features, developments and perspectives
Yang, Y., He, C., Dianyu, E., Yang, W., Qi, F., Xie, D., Shen, L., Peng, S., & Shuai, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108259 · Cited by 433
Self-citationKabir, H., Munir, K., Wen, C., & Li, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.013 · Cited by 397
Bioinspired surface modification of orthopedic implants for bone tissue engineering
Hu, C., Ashok, D., Nisbet, D. R., & Gautam, V. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119366 · Cited by 324
Metadata
- Authors
- Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., & Gao, C.
- Venue
- Materials Chemistry Frontiers
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 3
- Issue
- 4
- Pages
- 544-562
- ISSN
- 2052-1537 (ISSN-L)
- OpenAlex
- W2911834174
- Cited by
- 275
- References
- 122
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.