A review on inkjet printing of nanoparticle inks for flexible electronics
The DOI matches its Crossref record; 173 of the 176 references it cites were found in a registry or an index.
Abstract
The recent progress, challenges and promising future of design and synthesis of inks and device fabrication by inkjet printing are reviewed and discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To eliminate these issues, some potential mass-processing technologies are emerging, such as laser-based processing,[249,617] roll-to-roll printing,[618,619] inkjet printing,[620] and other technologies for flexible electronics that offer excellent and consistent performance while ensuring fast, low-cost manufacturing.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [617]
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Research works printed but not linked: 11
- Chopra, 2014, Int. J. Comput. Sci. Inf. Technol., 6, 61
- Zhang, 2018, Adv. Condens. Matter Phys., 2018, 9795654
- Falkovsky, 2008, J. Phys.: Conf. Ser., 129, 012004
- Martin, 2008, J. Phys.: Conf. Ser., 105, 012001
- Reis, 2000, MRS Online Proc. Libr., 625
- Kang, 2010, J. Mater. Sci.: Mater. Electron., 21, 1213
- Dang, 2014, Adv. Nat. Sci.: Nanosci. Nanotechnol., 6, 015003
- Dang, 2012, Adv. Nat. Sci.: Nanosci. Nanotechnol., 3, 035004
- Rahimi, 2015, J. Phys.: Conf. Ser., 660, 012044
- Nguyen, 2011, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2, 035015
- Ji, 2018, J. Mater. Sci.: Mater. Electron., 29, 13032
Cited by
Items 101–200 of 519
Layout-to-Bitmap Conversion and Design Rules for Inkjet-Printed Large-Scale Integrated Circuits
Kwon, J., Baek, S., Lee, Y., Tokito, S., & Jung, S. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c01296 · Cited by 41
Ravichandran, D., Xu, W., Jambhulkar, S., Zhu, Y., Kakarla, M., Bawareth, M., & Song, K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c12763 · Cited by 45
Inkjet-printed CMUT humidity sensors with high sensitivity and low hysteresis
Zheng, Z., Kim, N., Wong, W. S., & Yeow, J. T. W. (2020) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2020.128920 · Cited by 40
Walia, A. S., Srivastava, V., Rana, P. S., Somani, N., Gupta, N. K., Singh, G., Pimenov, D. Y., Mikołajczyk, T., & Khanna, N. (2021) · Metals · doi:10.3390/met11111668 · Cited by 41
“Laxman and Raj [18] Taguchi MRR, TWR, SR Current, pulse on/off duration, tool lift time”
BackgroundLi, B., Zhang, K., Qi, S., Guo, Y., Chen, J., & Lou, Y. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.153202 · Cited by 40
Nyabadza, A., Vázquez, M., Coyle, S. M., Fitzpatrick, B., & Brabazon, D. (2021) · Applied Sciences · doi:10.3390/app112210974 · Cited by 39
Ma, M., Sun, R., Li, S., Wang, S., Wang, S., Chu, F., & Sun, J. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2023.114161 · Cited by 39
Hazra, A., Mondal, U., Mandal, S., & Banerjee, P. (2021) · Dalton Transactions · doi:10.1039/d1dt00705j · Cited by 37
Akin, S., Chang, T., Abir, S. S. H., Kim, Y. W., Xu, S., Lim, J., Sim, Y., Lee, J., Tsai, J.-T., Nath, C., et al. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.110082 · Cited by 37
“These electrodes are mainly produced by lithography [17], vapor deposition [18], screen printing [19], ink-jet printing [20], and laser-induced metallization [21].”
Towards robust flexible electronics: Fabrication approaches and ongoing research challenges
Omiyale, B. O., Ogbeyemi, A., Ashraf, M. A., Song, K., & Zhang, W. C. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.117053 · Cited by 35
Synthesis of a silver nanoparticle ink for fabrication of reference electrodes
Oliveira, A. E. F., Pereira, A. C., de Resende, M. A. C., & Ferreira, L. F. (2022) · Talanta Open · doi:10.1016/j.talo.2022.100085 · Cited by 35
Printed Memristors: An Overview of Ink, Materials, Deposition Techniques, and Applications
Franco, M., Kiazadeh, A., Martins, R., Lanceros-Méndez, S., & Carlos, E. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202400212 · Cited by 39
Recent advances in conductive materials for printed electronics and printed technology
Ke, S., Liu, Y., Chen, F., Ni, X., & Ma, Y. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6581 · Cited by 34
Ma, J., Yang, S., Yang, Z.-H., He, Z., & Du, Z. J. (2025) · Sensors · doi:10.3390/s25144412 · Cited by 38
Binder-free electrodes for advanced potassium-ion batteries: A review
Liu, W., Liu, W., Jiang, Y., Gui, Q., Ba, D., Li, Y., & Liu, J. (2020) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.08.032 · Cited by 33
Wang, Y., Du, D. X., Xie, H., Zhang, X. B., Lin, K., Wang, K., & Fu, E. (2020) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-020-04828-z · Cited by 33
A binder jet 3D printed MXene composite for strain sensing and energy storage application
Li, T., Chen, T., Shen, X., Shi, H., Jabari, E., & Naguib, H. E. (2022) · Nanoscale Advances · doi:10.1039/d1na00698c · Cited by 33
Inkjet printing of silver conductive ink on textiles for wearable electronic applications
Boumegnane, A., Nadi, A., Cherkaoui, O., & Tahiri, M. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.01.469 · Cited by 33
A Precursor‐Derived Ultramicroporous Carbon for Printing Iontronic Logic Gates and Super‐Varactors
Gellrich, C., Shupletsov, L., Galek, P., Bahrawy, A., Grothe, J., & Kaskel, S. (2024) · Advanced Materials · doi:10.1002/adma.202401336 · Cited by 32
Lipovka, A. A., Petrov, I., Fatkullin, M., Murastov, G. V., Ivanov, A. A., Villa, N. E., Shchadenko, S., Averkiev, A., Чернова, А. П., Gubarev, F. A., et al. (2021) · Carbon · doi:10.1016/j.carbon.2022.03.039 · Cited by 32
Recent Advances in High-Throughput Nanomaterial Manufacturing for Hybrid Flexible Bioelectronics
Zavanelli, N., Kim, J., & Yeo, W. (2021) · Materials · doi:10.3390/ma14112973 · Cited by 32
“cm) [47] Finally, AgNPs are not well suited to skin contact because of p or biocompatibility, so y either must be well insulated or replaced with AuNP for such applications [26].”
BackgroundMethodInfluentialXiao, X., Li, G., Liu, T., & Gu, M. (2022) · Nanomaterials · doi:10.3390/nano12173076 · Cited by 31
“The higher velocity of the drop head compared with the tail causes the breakdown of the tail into small fractions and the formation of satellite droplets [11].”
BackgroundDuan, Y., Zhang, G., Yu, R., Zhang, H., Niu, G., Huang, Y., & Yin, Z. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc02553a · Cited by 31
CNTs-based biosensors for enzyme detection
Saguin, N. S. G., Maulik, G., Cao, X., Luo, X., Nag, A., Gao, J., Deng, S., & Wong, J. W. C. (2024) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2024.115753 · Cited by 32
Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications
Wang, S., Wu, X., Lu, J., Luo, Z., Xie, H., Zhang, X., Lin, K., & Wang, Y. (2022) · Nanomaterials · doi:10.3390/nano12050842 · Cited by 30
“Solvents are the important components of inks and play an important role in the rheological properties and the stability of ink [1].”
BackgroundMulti‐Jet Fusion 3D Voxel Printing of Conductive Elastomers
Chen, J., Zhao, L., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202205909 · Cited by 30
Multifunctional flexible conductive filament for human motion detection and electrothermal
Tan, S., Wang, J., Jin, W., Zhang, Q., Zhao, Z. C., Li, D., Cheng, D., Bi, S., Ran, J., Cai, G., et al. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101446 · Cited by 30
Inkjet-printed flexible piezoelectric sensor for self-powered biomedical monitoring
Abdolmaleki, H., Haugen, A. B., Merhi, Y., Nygaard, J. V., & Agarwala, S. (2023) · Materials Today Electronics · doi:10.1016/j.mtelec.2023.100056 · Cited by 30
“To have an optimal inkjet printing, the inks need to meet certain fluid mechanic requirements that are described by two dimensionless numbers known as Reynolds ( Re ) and Weber ( We ) numbers (Equations 1 and 2) [5].”
MethodTomotoshi, D., Oogami, R., & Kawasaki, H. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c04235 · Cited by 29
Design and manufacture of high-performance microbatteries: lithium and beyond
Chen, F., & Xu, Z. (2022) · Microstructures · doi:10.20517/microstructures.2022.10 · Cited by 30
Inkjet‐Printed p‐NiO/n‐ZnO Heterojunction Diodes for Photodetection Applications
González‐Torres, S., Vescio, G., Frieiro, J. L., Hauser, A., Linardi, F., López-Vidrier, J., Oszajca, M., Hernández, S., Cirera, A., & Garrido, B. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202300035 · Cited by 29
Sarıkaya, S., Ipekcı, H. H., Kotan, H., & Uzunoğlu, A. (2023) · Carbon · doi:10.1016/j.carbon.2023.118362 · Cited by 30
Pressure-constrained sonication activation of flexible printed metal circuit
Cao, L., Wang, Z., Hu, D., Dong, H., Qu, C., Zheng, Y., Yang, C., Zhang, R., Xing, C., Li, Z., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-52873-7 · Cited by 30
“26), which can be folded into various types of structures and maintain electric function (Supplementary Movie 9).”
Chou, W.-H., Galaz, A., Jara, M. O., Gamboa, A., & Morales, J. O. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12121168 · Cited by 28
“, the design of personalized dosage forms) and accurate deposition of material at predesigned locations of a substrate; whereas the possibility of nozzle clogging, complex drying behavior and the ink composition remain as the major challenges of this printing process [61,62].”
Rachim, V. P., Kang, S., Baek, J., & Park, S. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3059864 · Cited by 29
“Previous studies have also suggested a mass-producible sensor device, by utilizing screen printing [35], [36], and inkjet printing strategy [37]; however, they also utilized a high-cost material such as graphene and”
MethodApplications of Nanomaterials in RFID Wireless Sensor Components
Roh, S., Nguyen, T. D., & Lee, J. S. (2024) · Applied Sciences · doi:10.3390/app14031216 · Cited by 28
Ban, S., Lee, H., Chen, J., Kim, H.-S., Hu, Y., Cho, S. J., & Yeo, W. (2024) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2024.116302 · Cited by 30
Monitoring Symptoms of Infectious Diseases: Perspectives for Printed Wearable Sensors
Al-Halhouli, A. T., Albagdady, A., Alawadi, J., & Abeeleh, M. A. A. (2021) · Micromachines · doi:10.3390/mi12060620 · Cited by 28
Inkjet-printed MoS2-based field-effect transistors with graphene and hexagonal boron nitride inks
Hossain, R. F., & Kaul, A. B. (2020) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/6.0000082 · Cited by 27
Use of graphene-based fabric sensors for monitoring human activities
Hu, Q., Nag, A., Xu, Y., Han, T., & Zhang, L. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.113172 · Cited by 28
Bubble‐pen lithography: Fundamentals and applications
Kollipara, P. S., Mahendra, R., Li, J., & Zheng, Y. (2022) · Aggregate · doi:10.1002/agt2.189 · Cited by 27
Solution processed organic thermoelectric generators as energy harvesters for the Internet of Things
Pataki, N. J., Rossi, P., & Caironi, M. (2022) · Applied Physics Letters · doi:10.1063/5.0129861 · Cited by 27
Microfluidic opportunities in printed electrolyte-gated transistor biosensors
Dorfman, K. D., Adrahtas, D. Z., Thomas, M. S., & Frisbie, C. D. (2020) · Biomicrofluidics · doi:10.1063/1.5131365 · Cited by 30
Printable Single‐Ion Polymer Nanoparticle Electrolytes for Lithium Batteries
Gallastegui, A., Olmo, R. D., Criado‐Gonzalez, M., Leiza, J. R., Forsyth, M., & Mecerreyes, D. (2024) · Small Science · doi:10.1002/smsc.202300235 · Cited by 26
Silveri, F., Pelle, F. D., & Compagnone, D. (2025) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2025.118175 · Cited by 26
Hossain, M. K. (2020) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2020.118759 · Cited by 26
Surface modification of polyimide films towards very low contact angles
Constantin, C.-P., Grădinaru, L. M., Olga, P., & Rusu, R. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110036 · Cited by 26
Metal oxide heterojunctions using a printable nickel oxide ink
Ramachandran, H., Jahanara, M. M., Nair, N. M., & Swaminathan, P. (2020) · RSC Advances · doi:10.1039/c9ra08466e · Cited by 26
Characterization of self-assembled silver nanoparticle ink based on nanoemulsion method
Hu, D., Ogawa, K., Kajiyama, M., & Enomae, T. (2020) · Royal Society Open Science · doi:10.1098/rsos.200296 · Cited by 25
Laser-based three-dimensional manufacturing technologies for rechargeable batteries
Moldovan, D., Choi, J., Choo, Y., Kim, W., & Hwa, Y. (2021) · Nano Convergence · doi:10.1186/s40580-021-00271-w · Cited by 25
“, graphene), imparting additional functionality to the printed devices [90].”
BackgroundApplications, fluid mechanics, and colloidal science of carbon-nanotube-based 3D printable inks
Zhao, B., Sivasankar, V. S., Subudhi, S. K., Sinha, S., Dasgupta, A., & Das, S. (2022) · Nanoscale · doi:10.1039/d1nr04912g · Cited by 25
Formulation of conductive inks printable on textiles for electronic applications: a review
Boumegnane, A., Nadi, A., Cochrane, C., Boussu, F., Cherkaοui, O., & Tahiri, M. (2022) · Textile Progress · doi:10.1080/00405167.2021.2094135 · Cited by 25
“erties of the ink and the size of the printer (Nayak et al., 2019).”
BackgroundYang, W., Hermerschmidt, F., Mathies, F., & List, E. J. W. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-05347-1 · Cited by 24
Resistive Sensors for Smart Objects: Analysis on Printing Techniques
Bellitti, P., Borghetti, M., Cantù, E., Sardini, E., & Serpelloni, M. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3181941 · Cited by 24
Flexible inkjet-printed lithium-ion batteries with Ti3C2T current collector
Viviani, P., Gibertini, E., Fontana, P., Lissandrello, F., Gogotsi, Y. G., & Magagnin, L. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234287 · Cited by 24
Micro-to-nanometer patterning of solution-based materials for electronics and optoelectronics
Suh, Y., Shin, D., & Chun, Y. T. (2019) · RSC Advances · doi:10.1039/c9ra07514c · Cited by 24
Reversible Conductive Inkjet Printing of Healable and Recyclable Electrodes on Cardboard and Paper
Kang, D. J., Jüttke, Y., González‐García, L., Escudero, A., Haft, M., & Kraus, T. (2020) · Small · doi:10.1002/smll.202000928 · Cited by 24
Dual-reductant synthesis of nickel nanoparticles for use in screen-printing conductive paste
Liu, S., Tam, S. K., & Ng, K. M. (2021) · Journal of Nanoparticle Research · doi:10.1007/s11051-021-05191-8 · Cited by 24
“This is the key reason why metallic nanoparticles have been adopted as the main constituent of conductive inks for printed electronics (Nayak et al. 2019; Tan et al. 2019).”
BackgroundŞennik, E., Erden, F., Constantino, N. N., Oh, Y., Dean, R. A., & Oralkan, Ö. (2021) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2021.130001 · Cited by 23
Chittibabu, S. K., & Krishnamoorthi, C. (2023) · Microelectronic Engineering · doi:10.1016/j.mee.2023.112013 · Cited by 23
Fan, Z., Zong, H., Xie, Y., Zhou, Z., Guo, Z., & Zhou, G. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153834 · Cited by 23
Challenges in carbon ink formulation and strategies for fabrication of flexible supercapacitors
Saquib, M., Shetty, S., Lakshmikanth, M., Rathod, A., Naik, K., Nayak, R., & Selvakumar, M. (2025) · Carbon Trends · doi:10.1016/j.cartre.2025.100458 · Cited by 23
Cold spray-based rapid and scalable production of printed flexible electronics
Akin, S., Lee, S., Jo, S., Rüzgar, D. G., Subramaniam, K., Tsai, J.-T., & Jun, M. B. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103244 · Cited by 31
“Current AM approaches in producing FE involve the use of either inkjet printing, screen printing, gravure printing, blade coating, aerosol jet printing, dip-pen lithography [12], or hybrid printing methods [13 – 18].”
Water-Based Additive-Free Chromic Inks for Printing of Flexible Photochromics and Electrochromics
Zhou, F., Liang, D., Liu, S., Guo, Z., Wang, M., & Zhou, G. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c09595 · Cited by 22
Scalable Fabrication of Black Phosphorous Films for Infrared Photodetector Arrays
Corletto, A., Myagmarsereejid, P., Wang, S., Yan, W., Balendhran, S., Liu, H., Zhong, Y. L., Crozier, K. B., Batmunkh, M., & Bullock, J. (2024) · Advanced Science · doi:10.1002/advs.202403182 · Cited by 23
Inkjet-Printed Bio-Based Melanin Composite Humidity Sensor for Sustainable Electronics
Krebsbach, P., Rincón‐Iglesias, M., Pietsch, M., Henel, C., Lanceros-Méndez, S., Phua, J. W., Ambrico, M., & Hernandez‐Sosa, G. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c06596 · Cited by 22
Luu, T. L. A., Cao, X. T., Nguyen, V.-C., Pham, N. L., Nguyen, H. L., & Nguyen, C. T. (2020) · Journal of Nanotechnology · doi:10.1155/2020/3539701 · Cited by 23
Leung, D. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020449 · Cited by 25
“This process has been used for a wide variety of emerging applications, including organic and inorganic thin-film deposition, electronics, and devices, among others [26,27].”
BackgroundAdvancements and challenges in printed thermoelectrics
Ma, H., Lu, T., Shi, X., Li, M., Huo, S., Song, P., Chen, Z., & Hong, M. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101619 · Cited by 22
Overview of printable nanoparticles through inkjet process: Their application towards medical use
Rafiq, M., Khan, R. S., Rather, A. H., Wani, T. U., Qureashi, A., Pandith, A. H., Rather, S., & Sheikh, F. A. (2022) · Microelectronic Engineering · doi:10.1016/j.mee.2022.111889 · Cited by 23
Rivers, G., Austin, J. S., He, Y., Thompson, A., Gilani, N., Roberts, N., Zhao, P., Tuck, C. J., Hague, R., Wildman, R. D., et al. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103452 · Cited by 21
Ricci, S., Buonomo, M., Casalini, S., Bonacchi, S., Meneghetti, M., & Litti, L. (2023) · Nanoscale Advances · doi:10.1039/d2na00917j · Cited by 21
Additive manufacturing: New paradigm for developing water splitting systems
Mojabi, S., Afsahi, N., & Naseri, N. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.07.023 · Cited by 22
Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators
Yi, J., Babick, F., Strobel, C., Rosset, S., Ciarella, L., Borin, D. Y., Wilson, K. E., Anderson, I. A., Richter, A., & Henke, E. ‐. M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05444 · Cited by 21
Kralj, M., Krivačić, S., Ivanišević, I., Zubak, M., Supina, A., Marciuš, M., Halász, I., & Kassal, P. (2022) · Nanomaterials · doi:10.3390/nano12172936 · Cited by 20
“Flexible electronic devices manufactured by printing techniques on various substrates, such as paper, polymers, and textiles, have recently gained tremendous attention [1,2].”
BackgroundRagazzini, I., Gualandi, I., D’Altri, G., Matteo, V. D., Yeasmin, L., Cassani, M. C., Scavetta, E., Bernardi, E., & Ballarin, B. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121079 · Cited by 20
“…(Miyashiro, Hamano, & Umemura, 2020; , Para-ndeh, Kharaziha, & Karimzadeh, 2019; Liu et al., 2019), but at the same time metallic nanomaterials (Nayak, Mohanty, Nayak, & Ramadoss, 2019; Yang, Huang, Payne, Sun, & Wang, 2019) and, especially, conducting polymers have fascinating characteristics…”
Moghadami, M., Massoudi, A., & Nangir, M. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta02096k · Cited by 21
Dobrozhan, O., Vorobiov, S., Курбатов, Д. І., Baláž, M., Kolesnyk, M., Дяченко, О. В., Komanický, V., & Opanasyuk, A. (2020) · Superlattices and Microstructures · doi:10.1016/j.spmi.2020.106455 · Cited by 20
RetractedInkjet Printing Humidity Sensing Pattern Based on Self-Organizing Polystyrene Spheres
Neterebskaia, V. O., Goncharenko, A. O., Morozova, S. M., Kolchanov, D. S., & Vinogradov, A. V. (2020) · Nanomaterials · doi:10.3390/nano10081538 · Cited by 20
“According to the drop-on-demand technology, it allows creating high-resolution templates upon several micrometers [22].”
MethodSecor, E. B., Yeboah, D., & Gamba, L. (2025) · Nanoscale · doi:10.1039/d5nr02110c · Cited by 20
Inkjet Printing of Functional Inks for Smart Products
Buga, C. S., & Viana, J. C. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.104529 · Cited by 19
Aerosol Jet Printing and Interconnection Technologies on Additive Manufactured Substrates
Werum, K., Mueller, E., Keck, J., Jäger, J., Horter, T., Gläser, K., Buschkamp, S., Barth, M., Eberhardt, W., & Zimmermann, A. (2022) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6050119 · Cited by 19
A cold spray-based novel manufacturing route for flexible electronics
Akin, S., Jo, S., & Jun, M. B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.12.035 · Cited by 19
“Traditional patterning approaches to produce FE mainly involve inkjet printing [12,13], screen printing [14], gravure printing [15], blade printing [16], aerosol jet printing [17,18], or hybrid printing methods [19].”
Zavanelli, N., Kwon, K., & Yeo, W. (2023) · IEEE Open Journal of Engineering in Medicine and Biology · doi:10.1109/ojemb.2023.3330290 · Cited by 21
“…Weber number (We), Reynolds number, and Ohnesorge number (Oh): where η , ρ , and γ are the ink viscosity, density, and surface tension,respectively,vistheprintvelocity,and ζ ischaracteristic printing length, which is in most cases simply the diameter of the print head nozzle [110], [120], [121].”
Azad, B. K. D., Roozbahani, A., Tabatabaei, S. M., Valinejad, A., Fazelian, A., Shahmoradi, K., Khatami, F., Aghamir, S. M. K., & Kolahdouz, M. (2025) · Scientific Reports · doi:10.1038/s41598-025-89343-z · Cited by 19
“Recent research explored inkjet printing of various conductive materials such as copper, gold, silver, graphene, and carbon-based inks on multiple substrates 17–22 .”
Liao, B., Wang, H., Kang, L., Wan, S., Quan, X., Zhong, X., & Guo, X. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-05289-8 · Cited by 19
“The epoch of flexible electronics demands new methods to interconnect electronic components and circuits under mechanical deformations such as bending, rolling, and folding [2].”
MethodEscudero, A., González‐García, L., Strahl, R., Kang, D. J., Drzic, J., & Kraus, T. (2021) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.1c02350 · Cited by 19
Kang, G., Lee, H., Moon, J., Jang, H., Cho, D., & Byun, D. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00753 · Cited by 19
Zou, W., Yu, H., Lv, X., Zhou, P., Guo, H., Zhong, Y., & Liu, L. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202201197 · Cited by 19
Skarżyński, K., & Słoma, M. (2023) · Advanced Electronic Materials · doi:10.1002/aelm.202300238 · Cited by 20
Hossain, K., Dang, Y., & Cheffena, M. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3361911 · Cited by 18
“Most research on metal deposition by IJP has focused on silver because of its high conductivity, cost-effectiveness, and resistance to oxidation [46], [47].”
BackgroundKim, D. W., Kwon, J., Kim, H. S., & Jeong, U. (2021) · Nano Letters · doi:10.1021/acs.nanolett.1c01744 · Cited by 19
Amphiphilic Silver Nanoparticles for Inkjet-Printable Conductive Inks
Ivanišević, I., Kovačić, M., Zubak, M., Ressler, A., Krivačić, S., Katančić, Z., Pavlović, I. G., & Kassal, P. (2022) · Nanomaterials · doi:10.3390/nano12234252 · Cited by 17
Accelerated deep-learning-based process monitoring of microfluidic inkjet printing
Kim, S. J., Choi, E., Won, D. Y., Han, G., Han, G., An, K., & Kim, S. (2023) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2023.07.010 · Cited by 17
3D Printing of Customizable Transient Bioelectronics and Sensors
Fumeaux, N., & Briand, D. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202400058 · Cited by 19
Flexible ammonium ion-selective electrode based on inkjet-printed graphene solid contact
Krivačić, S., Boček, Ž., Zubak, M., Kojić, V., & Kassal, P. (2024) · Talanta · doi:10.1016/j.talanta.2024.126614 · Cited by 17
Novel Approaches in 3D Printing Techniques for the Development of High-Performance Micro-Batteries
Shaju, A., Ummer, R. P., Thomas, S., & Kandasubramanian, B. (2024) · Journal of Electronic Materials · doi:10.1007/s11664-024-11659-9 · Cited by 17
“IJP is a material jetting technology, 48 a technique which functions by carefully placing tiny droplets of unique inks onto a surface, one layer at a time.”
3D printing of microwave materials, components and their applications – A review
Holkar, R., Umarji, G., Shinde, M., & Rane, S. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.02.006 · Cited by 17
Wagner, K., Paquet, C., Martinez‐Rubi, Y., Genest, M., Guan, J., Sampson, K. L., Kim, K. S., Kell, A. J., Malenfant, P. R. L., & Lessard, B. H. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202001035 · Cited by 17
Optimization of Hybrid Ink Formulation and IPL Sintering Process for Ink-Jet 3D Printing
Lee, J., Choi, C.-S., Hwang, K., Han, K., Kim, J.-H., Nahm, S., & Kim, B.-S. (2021) · Nanomaterials · doi:10.3390/nano11051295 · Cited by 17
“The Intense Pulsed Light (IPL) sintering method using a xenon lamp has been utilized, allowing metal nanoparticles to be reduced in milliseconds at room temperature to manufacture electrodes with excellent electrical properties [15,16].”
Method
Metadata
- Authors
- Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A.
- Affiliations
- Central Institute of Plastics Engineering and Technology (IN)
- Corresponding author
- Nayak, Laxmidhar
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 29
- Pages
- 8771-8795
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2952165706
- Semantic Scholar
- abb1ce77deddc05d0ca46a91ce5503ddbd17a48b
- Cited by
- 497
- References
- 176
- Citations by year
- 2026: 46 · 2025: 67 · 2024: 77 · 2023: 75 · 2022: 90 · 2021: 88 · 2020: 51 · 2019: 3
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Keywords
- inkjet printing, nanoparticle ink, flexible electronics, device fabrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.