A review on inkjet printing of nanoparticle inks for flexible electronics
The DOI matches its Crossref record; 173 of the 176 references it cites were found in a registry or an index.
Abstract
The recent progress, challenges and promising future of design and synthesis of inks and device fabrication by inkjet printing are reviewed and discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To eliminate these issues, some potential mass-processing technologies are emerging, such as laser-based processing,[249,617] roll-to-roll printing,[618,619] inkjet printing,[620] and other technologies for flexible electronics that offer excellent and consistent performance while ensuring fast, low-cost manufacturing.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [617]
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Nanotubes as nanoprobes in scanning probe microscopy
Dai, H., Hafner, J. H., Rinzler, A. G., Colbert, D. T., & Smalley, R. E. (1996) · Nature · doi:10.1038/384147a0 · Cited by 2,211
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Nonlinear dynamics and breakup of free-surface flows
Eggers, J. (1997) · Reviews of Modern Physics · doi:10.1103/revmodphys.69.865 · Cited by 1,817
Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
Sekitani, T., Nakajima, H., Maeda, H., Fukushima, T., Aida, T., Hata, K., & Someya, T. (2009) · Nature Materials · doi:10.1038/nmat2459 · Cited by 1,767
Marangoni Effect Reverses Coffee-Ring Depositions
Hu, H., & Larson, R. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0609232 · Cited by 1,645
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Yunker, P. J., Still, T., Lohr, M. A., & Yodh, A. G. (2011) · Nature · doi:10.1038/nature10344 · Cited by 1,618
Synthesis of Graphene Oxide using Modified Hummers Method: Solvent Influence
Zaaba, N. I., Foo, K. L., Hashim, U., Tan, S. J., Liu, W.-W., & Voon, C. H. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.04.118 · Cited by 1,564
Graphene-Based Liquid Crystal Device
Blake, P., Brimicombe, P. D., Nair, R. R., Booth, T. J., Jiang, D., Schedin, F., Ponomarenko, L. A., Morozov, S. V., Gleeson, H. F., Hill, E. W., et al. (2008) · Nano Letters · doi:10.1021/nl080649i · Cited by 1,554
Stretchable, Porous, and Conductive Energy Textiles
Hu, L., Pasta, M., La Mantia, F., Cui, L., Jeong, S., Deshazer, H. D., Choi, J. W., Han, S. M., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl903949m · Cited by 1,475
The spreading of silicone oil drops on horizontal surfaces
Tanner, L. H. (1979) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/12/9/009 · Cited by 1,376
Capillary effects during droplet impact on a solid surface
Pasandideh-Fard, M., Qiao, Y. M., Chandra, S., & Mostaghimi, J. (1996) · Physics of Fluids · doi:10.1063/1.868850 · Cited by 1,364
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Synthesis and Study of Silver Nanoparticles
Mulfinger, L., Solomon, S. D., Bahadory, M., Jeyarajasingam, A. V., Rutkowsky, S. A., & Boritz, C. (2007) · Journal of Chemical Education · doi:10.1021/ed084p322 · Cited by 1,154
Optical properties of graphene
Falkovsky, L. A. (2008) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/129/1/012004 · Cited by 1,153
Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates
Cao, Q., Kim, H.-S., Pimparkar, N., Kulkarni, J. P., Wang, C., Shim, M., Roy, K., Alam, M. A., & Rogers, J. A. (2008) · Nature · doi:10.1038/nature07110 · Cited by 1,136
Probing Electrical Transport in Nanomaterials: Conductivity of Individual Carbon Nanotubes
Dai, H., Wong, E. W., & Lieber, C. M. (1996) · Science · doi:10.1126/science.272.5261.523 · Cited by 1,032
Wettability and Surface Free Energy of Graphene Films
Wang, S., Zhang, Y., Abidi, N., & Cabrales, L. (2009) · Langmuir · doi:10.1021/la901402f · Cited by 1,019
Time evolution of liquid drop impact onto solid, dry surfaces
Rioboo, R., Marengo, M., & Tropea, C. (2002) · Experiments in Fluids · doi:10.1007/s00348-002-0431-x · Cited by 937
All‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide
Dua, V., Surwade, S. P., Ammu, S., Agnihotra, S. R., Jain, S., Roberts, K. E., Park, S., Ruoff, R. S., & Manohar, S. K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905089 · Cited by 932
Ambipolar Electrical Transport in Semiconducting Single-Wall Carbon Nanotubes
Martel, R., Derycke, V., Lavoie, C., Appenzeller, J., Chan, K. K., Tersoff, J., & Avouris, P. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.256805 · Cited by 803
Ghosh, S., Sood, A. K., & Kumar, N. (2003) · Science · doi:10.1126/science.1079080 · Cited by 784
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Marinho, B., Ghislandi, M., Tkalya, E., Koning, C. E., & de With, G. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.01.024 · Cited by 718
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Stretchable Supercapacitors Based on Buckled Single‐Walled Carbon‐Nanotube Macrofilms
Yu, C., Masarapu, C., Rong, J., Wei, B., & Jiang, H. (2009) · Advanced Materials · doi:10.1002/adma.200901775 · Cited by 683
Cai, L., Song, L., Luan, P., Zhang, Q., Zhang, N., Gao, Q., Zhao, D., Zhang, X., Tu, M., Yang, F., et al. (2013) · Scientific Reports · doi:10.1038/srep03048 · Cited by 682
Vertical scaling of carbon nanotube field-effect transistors using top gate electrodes
Wind, S. J., Appenzeller, J., Martel, R., Derycke, V., & Avouris, P. (2002) · Applied Physics Letters · doi:10.1063/1.1480877 · Cited by 668
Measurement of Multicomponent Solubility Parameters for Graphene Facilitates Solvent Discovery
Hernandez, Y., Lotya, M., Rickard, D., Bergin, S. D., & Coleman, J. N. (2010) · Langmuir · doi:10.1021/la903188a · Cited by 659
Mechanisms of PVP in the preparation of silver nanoparticles
Wang, H., Qiao, X., Chen, J., Wang, X., & Ding, S. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.05.005 · Cited by 657
Ausman, K. D., Piner, R., Lourie, O., Ruoff, R. S., & Korobov, M. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002555m · Cited by 642
Zardetto, V., Brown, T. M., Reale, A., & Di Carlo, A. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22227 · Cited by 622
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Stow, C. D., & Hadfield, M. G. (1981) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1981.0002 · Cited by 530
Niu, Z., Dong, H., Zhu, B., Li, J., Hng, H. H., Zhou, W., Chen, X., & Xie, S. (2013) · Advanced Materials · doi:10.1002/adma.201204003 · Cited by 523
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Huang, L., Huang, Y., Liang, J., Wan, X., & Chen, Y. (2011) · Nano Research · doi:10.1007/s12274-011-0123-z · Cited by 458
All-inkjet-printed, solid-state flexible supercapacitors on paper
Choi, K.-H., Yoo, J., Lee, C. K., & Lee, S.-Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00966b · Cited by 449
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
Liquid-Phase Exfoliation of Graphene: An Overview on Exfoliation Media, Techniques, and Challenges
Xu, Y., Cao, H., Xue, Y., Li, B., & Cai, W. (2018) · Nanomaterials · doi:10.3390/nano8110942 · Cited by 423
Le, L. T., Ervin, M. H., Qiu, H., Fuchs, B. E., & Lee, W. Y. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.01.023 · Cited by 420
Flexible, Stretchable, Transparent Conducting Films Made from Superaligned Carbon Nanotubes
Feng, C., Liu, K., Wu, J., Liu, L., Cheng, J., Zhang, Y., Sun, Y., Li, Q., Fan, S., & Jiang, K. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901960 · Cited by 401
Capillary Interactions Between Anisotropic Colloidal Particles
Loudet, J. C., Alsayed, A. M., Zhang, J., & Yodh, A. G. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.018301 · Cited by 391
A study of the evaporation rates of small water drops placed on a solid surface
Birdi, K. S., Vu, D. T., & Winter, A. (1989) · The Journal of Physical Chemistry · doi:10.1021/j100346a065 · Cited by 391
Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection
Seekaew, Y., Lokavee, S., Phokharatkul, D., Wisitsoraat, A., Kerdcharoen, T., & Wongchoosuk, C. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.08.044 · Cited by 373
Plasmon-Enhanced Charge Carrier Generation in Organic Photovoltaic Films Using Silver Nanoprisms
Kulkarni, A. P., Noone, K. M., Munechika, K., Guyer, S. R., & Ginger, D. S. (2010) · Nano Letters · doi:10.1021/nl100615e · Cited by 373
Minimal Size of Coffee Ring Structure
Shen, X., Ho, C.-M., & Wong, T.-S. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp912190v · Cited by 363
Latest advances in substrates for flexible electronics
MacDonald, W. A., Looney, M. K., MacKerron, D., Eveson, R., Adam, R., Hashimoto, K., & Rakos, K. (2007) · Journal of the Society for Information Display · doi:10.1889/1.2825093 · Cited by 360
Nanochromatography Driven by the Coffee Ring Effect
Wong, T.-S., Chen, T.-H., Shen, X., & Ho, C.-M. (2011) · Analytical Chemistry · doi:10.1021/ac102963x · Cited by 350
Chi, K., Zhang, Z., Xi, J., Huang, Y., Xiao, F., Wang, S., & Liu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504539k · Cited by 339
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Antibacterial effect of silver nanoparticles in Pseudomonas aeruginosa
Salomoni, R., Léo, P., Montemor, A., Rinaldi, B., & Rodrigues, M. (2017) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s133415 · Cited by 334
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M. (2017) · ACS Nano · doi:10.1021/acsnano.7b03354 · Cited by 334
Kim, D., Jeong, S., Park, B. K., & Moon, J. (2006) · Applied Physics Letters · doi:10.1063/1.2424671 · Cited by 331
Inkjet Printing of Highly Loaded Particulate Suspensions
Derby, B., & Reis, N. (2003) · MRS Bulletin · doi:10.1557/mrs2003.230 · Cited by 327
Inkjet printing - the physics of manipulating liquid jets and drops
Martin, G. D., Hoath, S. D., & Hutchings, I. M. (2008) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/105/1/012001 · Cited by 325
Bradley, K., Gabriel, J.-C. P., & Grüner, G. (2003) · Nano Letters · doi:10.1021/nl0344864 · Cited by 324
Recent Progress in Inkjet‐Printed Thin‐Film Transistors
Chung, S., Cho, K., & Lee, T. (2019) · Advanced Science · doi:10.1002/advs.201801445 · Cited by 312
Pan, K., Fan, Y., Leng, T., Li, J., Xin, Z., Zhang, J., Hao, L., Gallop, J., Novoselov, K. S., & Hu, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-07632-w · Cited by 306
Ink Jet Deposition of Ceramic Suspensions: Modeling and Experiments of Droplet Formation
Reis, N., & Derby, B. (2000) · MRS Proceedings · doi:10.1557/proc-625-117 · Cited by 289
Shen, W., Zhang, X., Huang, Q., Xu, Q., & Song, W. (2014) · Nanoscale · doi:10.1039/c3nr05479a · Cited by 288
Metallic Nanoparticle Inks for 3D Printing of Electronics
Tan, H. W., An, J., Chua, C. K., & Tran, T. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800831 · Cited by 286
High efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen, T. M., Galagan, Y., Biezemans, A. F. K. V., Slaats, T. M. W. L., Voorthuijzen, W. P., Kommeren, S., Shanmugam, S., Teunissen, J. P., Hadipour, A., Verhees, W. J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00540j · Cited by 275
High-mobility carbon-nanotube thin-film transistors on a polymeric substrate
Snow, E. S., Campbell, P. M., Ancona, M. G., & Novak, J. P. (2005) · Applied Physics Letters · doi:10.1063/1.1854721 · Cited by 266
Top-Down versus Bottom-Up Fabrication of Graphene-Based Electronics
Tour, J. M. (2014) · Chemistry of Materials · doi:10.1021/cm402179h · Cited by 262
Dynamic surface and interfacial tensions of surfactant and polymer solutions
Miller, R., Joos, P., & Fainerman, V. B. (1994) · Advances in Colloid and Interface Science · doi:10.1016/0001-8686(94)80017-0 · Cited by 258
Pourmortazavi, S. M., Taghdiri, M., Makari, V., & Rahimi-Nasrabadi, M. (2015) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2014.10.010 · Cited by 253
Micropatterning of Graphene Sheets by Inkjet Printing and Its Wideband Dipole‐Antenna Application
Shin, K., Hong, J., & Jang, J. (2011) · Advanced Materials · doi:10.1002/adma.201100345 · Cited by 252
Recent Advances in Controlling the Depositing Morphologies of Inkjet Droplets
Sun, J., Bao, B., He, M., Zhou, H., & Song, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07006 · Cited by 249
Size Effect on the Thermodynamic Properties of Silver Nanoparticles
Luo, W., Hu, W., & Xiao, S. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp0770155 · Cited by 242
A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics
Shin, S. R., Farzad, R., Tamayol, A., Manoharan, V., Mostafalu, P., Zhang, Y. S., Akbari, M., Jung, S. M., Kim, D., Comotto, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506420 · Cited by 236
Temperature-Dependent Electrical Properties of Graphene Inkjet-Printed on Flexible Materials
Kong, D., Le, L. T., Li, Y., Zunino, J. L., & Lee, W. (2012) · Langmuir · doi:10.1021/la301775d · Cited by 233
Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects
Peng, X., Yuan, J., Shen, S., Gao, M., Chesman, A. S. R., Yin, H., Cheng, J., Zhang, Q., & Angmo, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703704 · Cited by 224
Experimental study of the parameters for stable drop-on-demand inkjet performance
Liu, Y., & Derby, B. (2019) · Physics of Fluids · doi:10.1063/1.5085868 · Cited by 224
Tunable Carbon Nanotube Thin‐Film Transistors Produced Exclusively via Inkjet Printing
Okimoto, H., Takenobu, T., Yanagi, K., Miyata, Y., Shimotani, H., Kataura, H., & Iwasa, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000889 · Cited by 219
Ink-jet printing of carbon nanotube thin film transistors
Beecher, P., Servati, P., Rozhin, A., Colli, A., Scardaci, V., Pisana, S., Hasan, T., Flewitt, A. J., Robertson, J., Hsieh, G. W., et al. (2007) · Journal of Applied Physics · doi:10.1063/1.2770835 · Cited by 216
Inkjet-printed energy storage device using graphene/polyaniline inks
Xu, Y., Hennig, I., Freyberg, D., James Strudwick, A., Georg Schwab, M., Weitz, T., & Chih-Pei Cha, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.096 · Cited by 214
Fabrication of Transparent Multilayer Circuits by Inkjet Printing
Jiang, J., Bao, B., Li, M., Sun, J., Zhang, C., Li, Y., Li, F., Yao, X., & Song, Y. (2016) · Advanced Materials · doi:10.1002/adma.201503682 · Cited by 211
Inkjet printed electronics using copper nanoparticle ink
Kang, J. S., Kim, H. S., Ryu, J., Thomas Hahn, H., Jang, S., & Joung, J. W. (2010) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-009-0049-3 · Cited by 208
Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics
Zhang, Z., Zhang, X., Xin, Z., Deng, M., Wen, Y., & Song, Y. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/42/425601 · Cited by 208
Danov, K. D., Kralchevsky, P. A., Naydenov, B. N., & Brenn, G. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.01.079 · Cited by 206
Scalable, Self‐Aligned Printing of Flexible Graphene Micro‐Supercapacitors
Hyun, W. J., Secor, E. B., Kim, C., Hersam, M. C., Francis, L. F., & Frisbie, C. D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700285 · Cited by 202
Inkjet Printing of Carbon Nanotubes
Tortorich, R., & Choi, J.-W. (2013) · Nanomaterials · doi:10.3390/nano3030453 · Cited by 199
Inkjet-Printed Triple Cation Perovskite Solar Cells
Mathies, F., Eggers, H., Richards, B. S., Hernandez-Sosa, G., Lemmer, U., & Paetzold, U. W. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00222 · Cited by 199
Jeong, S., Song, H. C., Lee, W. W., Lee, S. S., Choi, Y., Son, W., Kim, E. D., Paik, C. H., Oh, S. H., & Ryu, B.-H. (2011) · Langmuir · doi:10.1021/la104136w · Cited by 193
Lim, T., Han, S., Chung, J., Chung, J. T., Ko, S., & Grigoropoulos, C. P. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.05.028 · Cited by 190
Identification of high performance solvents for the sustainable processing of graphene
Salavagione, H. J., Sherwood, J., De bruyn, M., Budarin, V. L., Ellis, G. J., Clark, J. H., & Shuttleworth, P. S. (2017) · Green Chemistry · doi:10.1039/c7gc00112f · Cited by 189
Wetting and Contact Lines of Micrometer-Sized Ellipsoids
Loudet, J. C., Yodh, A. G., & Pouligny, B. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.018304 · Cited by 180
Secor, E. B., Gao, T. Z., Islam, A. E., Rao, R., Wallace, S. G., Zhu, J., Putz, K. W., Maruyama, B., & Hersam, M. C. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00029 · Cited by 178
Inkjet printed highly transparent and flexible graphene micro-supercapacitors
Sollami Delekta, S., Smith, A. D., Li, J., & Östling, M. (2017) · Nanoscale · doi:10.1039/c7nr02204b · Cited by 171
Inkjet printed (bio)chemical sensing devices
Komuro, N., Takaki, S., Suzuki, K., & Citterio, D. (2013) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-013-7013-z · Cited by 164
Graphene and the related conductive inks for flexible electronics
Yang, W., & Wang, C. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc01625a · Cited by 161
All‐Printed, Foldable Organic Thin‐Film Transistors on Glassine Paper
Hyun, W. J., Secor, E. B., Rojas, G. A., Hersam, M. C., Francis, L. F., & Frisbie, C. D. (2015) · Advanced Materials · doi:10.1002/adma.201503478 · Cited by 158
Inkjet-printed silicon as high performance anodes for Li-ion batteries
Lawes, S., Sun, Q., Lushington, A., Xiao, B., Liu, Y., & Sun, X. A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.041 · Cited by 157
Cui, W., Lü, W., Zhang, Y., Lin, G., Wei, T., & Jiang, L. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.01.023 · Cited by 153
Printing Technologies on Flexible Substrates for Printed Electronics
Cruz, S. M., Rocha, L. A., & Viana, J. C. (2018) · InTech eBooks · doi:10.5772/intechopen.76161 · Cited by 153
Flexible Polymeric Substrates for Electronic Applications
Malik, A., & Kandasubramanian, B. (2018) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2018.1473424 · Cited by 148
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim, J. H., Lee, S., Wajahat, M., Jeong, H., Chang, W. S., Jeong, H. J., Yang, J.-R., Kim, J. T., & Seol, S. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04771 · Cited by 147
Evaporation rate of water in a vessel
Hisatake, K., Tanaka, S., & Aizawa, Y. (1993) · Journal of Applied Physics · doi:10.1063/1.354031 · Cited by 146
Inkjet Printing of Transparent, Electrically Conducting Single‐Walled Carbon‐Nanotube Composites
Small, W. R., & in het Panhuis, M. (2007) · Small · doi:10.1002/smll.200700110 · Cited by 141
Corrosion Protection of Electrically Conductive Surfaces
Song, J., Wang, L., Zibart, A., & Koch, C. (2012) · Metals · doi:10.3390/met2040450 · Cited by 134
Ambipolar-to-Unipolar Conversion of Carbon Nanotube Transistors by Gate Structure Engineering
Lin, Y.-M., Appenzeller, J., & Avouris, P. (2004) · Nano Letters · doi:10.1021/nl049745j · Cited by 134
Pattern formation in drying droplets of polyelectrolyte and salt
Kaya, D., Белый, В. А., & Muthukumar, M. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3493687 · Cited by 132
Mizukami, M., Cho, S.-I., Watanabe, K., Abiko, M., Suzuri, Y., Tokito, S., & Kido, J. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2776296 · Cited by 132
The roles of wettability and surface tension in droplet formation during inkjet printing
He, B. W., Yang, S., Qin, Z., Wen, B., & Zhang, C. (2017) · Scientific Reports · doi:10.1038/s41598-017-12189-7 · Cited by 127
Fabrication of paper-based conductive patterns for flexible electronics by direct-writing
Tai, Y., & Yang, Z. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03065a · Cited by 126
Ink-jet printing of polymer light-emitting devices
Duineveld, P. C., de Kok, M. M., Buechel, M., Sempel, A., Mutsaers, K. A. H., van de Weijer, P., Camps, I. G. J., van den Biggelaar, T. J. M., Rubingh, J. E. J. M., & Haskal, E. I. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.457460 · Cited by 124
Ag–graphene hybrid conductive ink for writing electronics
Xu, L., Yang, G. Y., Jing, H. Y., Wei, J., & Han, Y. D. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/5/055201 · Cited by 122
Self-Assembly of Microscale Objects at a Liquid/Liquid Interface through Lateral Capillary Forces
Bowden, N. B., Arias, F., Deng, T., & Whitesides, G. M. (2001) · Langmuir · doi:10.1021/la001447o · Cited by 115
Inkjet-Printed Flexible Graphene-Based Supercapacitor
Ervin, M. H., Le, L. T. M., & Lee, W. Y. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.10.006 · Cited by 107
Photochemical Preparation of Silver Nanoparticles Supported on Zeolite Crystals
Zaarour, M., El-Roz, M., Dong, B., Retoux, R., Aad, R., Cardin, J., Dufour, C., Gourbilleau, F., Gilson, J., & Mintova, S. (2014) · Langmuir · doi:10.1021/la5006743 · Cited by 107
Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents
Eggenhuisen, T. M., Galagan, Y., Coenen, E. W. C., Voorthuijzen, W. P., Slaats, M. W. L., Kommeren, S., Shanmuganam, S., Coenen, M. J. J., Andriessen, R., & Groen, P. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.12.014 · Cited by 97
Carbon nanotube ink for writing on cellulose paper
Han, J., Kim, B., Li, J., & Meyyappan, M. (2013) · Materials Research Bulletin · doi:10.1016/j.materresbull.2013.10.048 · Cited by 94
Inkjet Printed Silver Nanoparticle Humidity Sensor With Memory Effect on Paper
Andersson, H., Manuilskiy, A., Unander, T., Lidenmark, C., Forsberg, S., & Nilsson, H. (2011) · IEEE Sensors Journal · doi:10.1109/jsen.2011.2182044 · Cited by 92
Inkjet-printed organic thin film transistors based on TIPS pentacene with insulating polymers
Cho, S. Y., Ko, J. M., Lim, J., Lee, J. Y., & Lee, C. (2012) · Journal of Materials Chemistry C · doi:10.1039/c2tc00360k · Cited by 90
Arapov, K. A., Abbel, R., de With, G., & Friedrich, H. (2014) · Faraday Discussions · doi:10.1039/c4fd00067f · Cited by 89
Single-Walled Carbon Nanotube Thin-Film Sensor for Ultrasensitive Gas Detection
Wongwiriyapan, W., Honda, S., Konishi, H., Mizuta, T., Ikuno, T., Ito, T., Maekawa, T., Suzuki, K., Ishikawa, H., Oura, K., et al. (2005) · Japanese Journal of Applied Physics · doi:10.1143/jjap.44.l482 · Cited by 88
Gracia‐Espino, E., Sala, G., Pino, F., Halonen, N., Luomahaara, J., Mäklin, J., Tóth, G., Kordás, K., Jantunen, H. M., Terrones, M., et al. (2010) · ACS Nano · doi:10.1021/nn1000723 · Cited by 86
A simple large-scale droplet generator for studies of inkjet printing
Castrejón-Pita, J. R., Martín, G., Hoath, S. D., & Hutchings, I. M. (2008) · Review of Scientific Instruments · doi:10.1063/1.2957744 · Cited by 86
Inkjet‐Printed Lithium–Sulfur Microcathodes for All‐Printed, Integrated Nanomanufacturing
Milroy, C., Jang, S., Fujimori, T., Dodabalapur, A., & Manthiram, A. (2017) · Small · doi:10.1002/smll.201603786 · Cited by 83
Ink-Jet Printing of Carbon Nanotube Thin-Film Transistors on Flexible Plastic Substrates
Takenobu, T., Miura, N., Lu, S., Okimoto, H., Asano, T., Shiraishi, M., & Iwasa, Y. (2009) · Applied Physics Express · doi:10.1143/apex.2.025005 · Cited by 79
Inkjet-printed gas sensors: metal decorated WO3 nanoparticles and their gas sensing properties
Kukkola, J., Mohl, M., Leino, A.-R., Tóth, G., Wu, M., Shchukarev, A., Popov, A., Mikkola, J., Lauri, J., Riihimäki, M., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32499g · Cited by 77
Inkjet Printed Fractal-Connected Electrodes with Silver Nanoparticle Ink
Vaseem, M., Lee, K. M., Hong, A., & Hahn, Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300689d · Cited by 75
Inkjet-printed highly conductive transparent patterns with water based Ag-doped graphene
Li, L., Guo, Y., Zhang, X., & Song, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04156a · Cited by 74
Inkjet-printed bifunctional carbon nanotubes for pH sensing
Qin, Y., Kwon, H.-J., Subrahmanyam, A. V., Howlader, M. M. R., Selvaganapathy, P. R., Adronov, A., & Deen, M. J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.04.048 · Cited by 72
Graphene nano-ink biosensor arrays on a microfluidic paper for multiplexed detection of metabolites
Labroo, P., & Cui, Y. (2014) · Analytica Chimica Acta · doi:10.1016/j.aca.2014.01.024 · Cited by 69
Dang, C. M., Dang, T. M. D., & Fribourg‐Blanc, E. (2014) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6262/6/1/015003 · Cited by 67
Cai, G., Park, S., Cheng, X., Eh, A. L., & Lee, P. S. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1526031 · Cited by 66
Dispersion of denatured carbon nanotubes by using a dimethylformamide solution
Nguyen, T. T., Nguyen, S. U., Phuong, D. T., Nguyen, D. C., & Anh, T. M. (2011) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6262/2/3/035015 · Cited by 65
Printable Nanomaterials for the Fabrication of High-Performance Supercapacitors
Sun, J., Cui, B., Chu, F., Yun, C., He, M., Li, L., & Song, Y. (2018) · Nanomaterials · doi:10.3390/nano8070528 · Cited by 65
Inkjet-printed graphene-based wireless gas sensor modules
Le, T., Lakafosis, V., Lin, Z., Wong, C. P., & Tentzeris, M. M. (2012) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2012.6248958 · Cited by 58
Influence of surfactant on the preparation of silver nanoparticles by polyol method
Dung Dang, T. M., Tuyet Le, T. T., Fribourg-Blanc, E., & Dang, M. C. (2012) · Advances in Natural Sciences: Nanoscience and Nanotechnology · doi:10.1088/2043-6262/3/3/035004 · Cited by 55
Bucella, S. G., Salazar‐Rios, J. M., Derenskyi, V., Fritsch, M., Scherf, U., Loi, M. A., & Caironi, M. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600094 · Cited by 55
Tung, N. H., Chikae, M., Ukita, Y., Viet, P. H., & Takamura, Y. (2012) · Analytical Chemistry · doi:10.1021/ac202782b · Cited by 54
Tai, J., Gan, H. Y., Liang, Y. N., & Lok, B. K. (2008) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc.2008.4763524 · Cited by 52
Properties of graphene inks stabilized by different functional groups
Wei, D., Li, H., Han, D., Zhang, Q., Niu, L., Yang, H., Bower, C., Andrew, P., & Ryhänen, T. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/24/245702 · Cited by 51
Inkjet printing bendable circuits based on an oil-water interface reaction
Sun, J., Guo, Y., Cui, B., Chu, F., Li, H., Li, Y., He, M., Ding, D., Liu, R., Li, L., et al. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.204 · Cited by 51
Carbon nanotubes prepared by anodic aluminum oxide template method
Hou, P., Liu, C., Shi, C. Y., & Cheng, H. (2011) · Chinese Science Bulletin · doi:10.1007/s11434-011-4892-2 · Cited by 50
Surface Tension Gradients Induced by Temperature: The Thermal Marangoni Effect
Gugliotti, M., Baptista, M. S., Politi, M. J., Silverstein, T. P., & Slater, C. D. (2004) · Journal of Chemical Education · doi:10.1021/ed081p824 · Cited by 49
Inkjet printed flexible electronics on paper substrate with reduced graphene oxide/carbon black ink
Ji, A., Chen, Y., Wang, X., & Xu, C. (2018) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-018-9425-1 · Cited by 46
Gohil, R. M. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070480916 · Cited by 45
Michel, M., Biswas, C., & Kaul, A. B. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.12.001 · Cited by 43
Dependence of Surface Tension on Temperature
Mayer, S. W. (1963) · The Journal of Chemical Physics · doi:10.1063/1.1733879 · Cited by 38
Diao, J., Yuan, J., Ding, A., Zheng, J., & Lu, Z. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800092 · Cited by 37
Nogueira, A. L., Machado, R. A. F., de Souza, A. Z., Martinello, F., Franco, C. V., & Dutra, G. B. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4030903 · Cited by 35
Influence of Bond Number on Behaviors of Liquid Drops Deposited onto Solid Substrates
Zhu, Z., Wang, Y., Liu, Q., & Xie, J.-C. (2012) · Microgravity Science and Technology · doi:10.1007/s12217-011-9294-1 · Cited by 34
Fracture and Failure of Nanoparticle Monolayers and Multilayers
Wang, Y., Kanjanaboos, P., Barry, E., McBride, S. P., Lin, X., & Jaeger, H. M. (2014) · Nano Letters · doi:10.1021/nl404185b · Cited by 33
Cuong, N. T., Nguyen, H. M. T., & Nguyen, M. T. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51017d · Cited by 31
Evaporation of small water drops maintained at constant volume
Peiss, C. N. (1989) · Journal of Applied Physics · doi:10.1063/1.343165 · Cited by 30
Enhanced Coffee-Ring Effect via Substrate Roughness in Evaporation of Colloidal Droplets
Zhang, Y., Chen, X., Liu, F., Li, L., Dai, J., & Liu, T. (2018) · Advances in Condensed Matter Physics · doi:10.1155/2018/9795654 · Cited by 29
Horn, B. L. V., & Winter, H. H. (2003) · Macromolecules · doi:10.1021/ma0347262 · Cited by 25
Ink-jet printed thin-film transistors with carbon nanotube channels shaped in long strips
Li, J., Unander, T., Cabezas, A. L., Shao, B., Liu, Z., Feng, Y., Forsberg, E. B., Zhang, Z., Jõgi, I., Gao, X., et al. (2011) · Journal of Applied Physics · doi:10.1063/1.3569842 · Cited by 25
Templier, F., Aventurier, B., Demars, P., Botrel, J.-L., & Martin, P. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.197 · Cited by 24
Rossouw, D., Botton, G. A., Najafi, E., Lee, V., & Hitchcock, A. P. (2012) · ACS Nano · doi:10.1021/nn3045227 · Cited by 22
Surface Modification of Polyimide Films for Inkjet-Printing of Flexible Electronic Devices
Fang, Y., & Tentzeris, M. M. (2018) · InTech eBooks · doi:10.5772/intechopen.76450 · Cited by 21
A dye functionalized silver–silica core–shell nanoparticle organic light emitting diode
Liu, F., Rao, B. S., & Nunzi, J. (2011) · Organic Electronics · doi:10.1016/j.orgel.2011.04.013 · Cited by 19
Analysis of Lithography Based Approaches in Development of Semiconductors
Chopra, J. (2014) · International Journal of Computer Science and Information Technology · doi:10.5121/ijcsit.2014.6604 · Cited by 16
Organic Light-emitting Materials and Devices V
Kafafi, Z. H. (2002) · Cited by 16
The Properties of Conducting Polymers and Substrates for Printed Electronics
Hrehorova, E., Wood, L. K., Pekarovič, J., Pekarovičová, A., Fleming, P. D., & Bliznyuk, V. N. (2005) · Technical programs and proceedings/Technical program and proceedings · doi:10.2352/issn.2169-4451.2005.21.2.art00063_3 · Cited by 9
Flexible supercapacitor based on MnO2coated laser carbonized electrodes
Rahimi, R., Ochoa, M., Yu, W., & Ziaie, B. (2015) · Journal of Physics Conference Series · doi:10.1088/1742-6596/660/1/012044 · Cited by 6
Preparation of carbon nanotube ink via organic hydrazine treatment
Liu, L.-H., Teng, J.-S., Hsu, Y., & Wang, P. (2014) · International Microsystems, Packaging, Assembly and Circuits Technology Conference · doi:10.1109/impact.2014.7048444 · Cited by 2
Chang, W. S. (2016) · IEEE International Conference on Plasma Science (ICOPS) · doi:10.1109/plasma.2016.7534212 · Cited by 2
Research works printed but not linked: 11
- Chopra, 2014, Int. J. Comput. Sci. Inf. Technol., 6, 61
- Zhang, 2018, Adv. Condens. Matter Phys., 2018, 9795654
- Falkovsky, 2008, J. Phys.: Conf. Ser., 129, 012004
- Martin, 2008, J. Phys.: Conf. Ser., 105, 012001
- Reis, 2000, MRS Online Proc. Libr., 625
- Kang, 2010, J. Mater. Sci.: Mater. Electron., 21, 1213
- Dang, 2014, Adv. Nat. Sci.: Nanosci. Nanotechnol., 6, 015003
- Dang, 2012, Adv. Nat. Sci.: Nanosci. Nanotechnol., 3, 035004
- Rahimi, 2015, J. Phys.: Conf. Ser., 660, 012044
- Nguyen, 2011, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2, 035015
- Ji, 2018, J. Mater. Sci.: Mater. Electron., 29, 13032
Cited by
Abdollahi, A., Roghani-Mamaqani, H., Razavi, B., & Salami-Kalajahi, M. (2020) · ACS Nano · doi:10.1021/acsnano.0c07289 · Cited by 643
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
“The advantage of this technology is to minimize wastage, environmentally friendly, and postprocessing is minimized [53].”
BackgroundFlexible Electronics: Status, Challenges and Opportunities
Corzo, D., Tostado-Blázquez, G., & Baran, D. (2020) · Frontiers in Electronics · doi:10.3389/felec.2020.594003 · Cited by 391
“Nonetheless, many challenges to be addressed by future research include the formation of fracture paths and selfhealing as a form of mitigation, the formation of oxides and passivation pathways, as well as methods to simplify the synthesis and preparation of inks (Nayak et al., 2019).”
MethodRecent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
Metadata
- Authors
- Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A.
- Affiliations
- Central Institute of Plastics Engineering and Technology (IN)
- Corresponding author
- Nayak, Laxmidhar
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 29
- Pages
- 8771-8795
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2952165706
- Semantic Scholar
- abb1ce77deddc05d0ca46a91ce5503ddbd17a48b
- Cited by
- 497
- References
- 176
- Citations by year
- 2026: 46 · 2025: 67 · 2024: 77 · 2023: 75 · 2022: 90 · 2021: 88 · 2020: 51 · 2019: 3
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Keywords
- inkjet printing, nanoparticle ink, flexible electronics, device fabrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.