A review on inkjet printing of nanoparticle inks for flexible electronics
The DOI matches its Crossref record; 173 of the 176 references it cites were found in a registry or an index.
Abstract
The recent progress, challenges and promising future of design and synthesis of inks and device fabrication by inkjet printing are reviewed and discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To eliminate these issues, some potential mass-processing technologies are emerging, such as laser-based processing,[249,617] roll-to-roll printing,[618,619] inkjet printing,[620] and other technologies for flexible electronics that offer excellent and consistent performance while ensuring fast, low-cost manufacturing.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [617]
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Research works printed but not linked: 11
- Chopra, 2014, Int. J. Comput. Sci. Inf. Technol., 6, 61
- Zhang, 2018, Adv. Condens. Matter Phys., 2018, 9795654
- Falkovsky, 2008, J. Phys.: Conf. Ser., 129, 012004
- Martin, 2008, J. Phys.: Conf. Ser., 105, 012001
- Reis, 2000, MRS Online Proc. Libr., 625
- Kang, 2010, J. Mater. Sci.: Mater. Electron., 21, 1213
- Dang, 2014, Adv. Nat. Sci.: Nanosci. Nanotechnol., 6, 015003
- Dang, 2012, Adv. Nat. Sci.: Nanosci. Nanotechnol., 3, 035004
- Rahimi, 2015, J. Phys.: Conf. Ser., 660, 012044
- Nguyen, 2011, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2, 035015
- Ji, 2018, J. Mater. Sci.: Mater. Electron., 29, 13032
Cited by
Items 401–500 of 519
Metal-Based Inks for Printed Electronics. Comparison of the Main Approaches to Production
Popovetskiy, P. (2025) · Colloid Journal · doi:10.1134/s1061933x25600435 · Cited by 1
“The topic of flexible printed electronics has been covered in a number of reviews published between 2017 and 2024 [4, 6, 12–16].”
Boniello, G., Tyagi, P., Maurya, S., & Ressier, L. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.139300 · Cited by 1
Guiding Cell Growth: Graphene-Patterned Polymeric Substrates for Enhanced Tissue Proliferation
Sosnowicz, W., Krzemiński, J., Dominiczak, J., Baraniecki, D., Trzaskowska, P. A., Corvo, M. C., Żołek‐Tryznowska, Z., Jeznach, A., Jakubowska, M., & Dybowska-Sarapuk, Ł. (2025) · Nanotechnology Science and Applications · doi:10.2147/nsa.s530959 · Cited by 1
“IJP utilizes thermal or ultrasonic actuation to eject a droplet typically ranging in 20–50 μm diameter which results typically in up to 100 μm dot on the substrate.”
Investigation of Insertion Loss in Inkjet-Printed Coplanar Waveguide Based on Drying Temperature
Yu, J. H., Sim, S.-M., Choi, J., Lee, S.-H., & Kim, J.-M. (2025) · Journal of electromagnetic engineering and science · doi:10.26866/jees.2025.6.r.328 · Cited by 1
“Inkjet printing is a versatile and cost-effective process for creating a wide range of electronic devices [1–5].”
Baimler, I. V., Popov, I. A., Simakin, A. V., & Gudkov, S. V. (2026) · Nanomaterials · doi:10.3390/nano16020079 · Cited by 1
“…an increase in the areas of application of nanoparticles, for example, biomedicine [6,7], catalysis [8,9], energy storage [10–13], electronics [14,15], etc. Nanoparticle size control in laser nanoparticle synthesis is an important aspect of the synthesis process, since various properties of…”
Hassan, A., Ali, S. N., Khan, A., & Bermak, A. (2026) · Analog Integrated Circuits and Signal Processing · doi:10.1007/s10470-026-02559-5 · Cited by 1
“The 100 μm PET film adds ≈ $0.15 per device in lab sheet handling, so materials are ≈ $0.47 per sensor, with no masks or wet-etch steps [29, 30].”
InfluentialTrach, J., Butler, C., Dolanjski, M., Meldrum, A., & Veinot, J. G. C. (2026) · Nanoscale · doi:10.1039/d5nr04768d · Cited by 1
Jiang, C., Gu, M., Feng, H., Tian, Y., & Jing, X. (2026) · Journal of Applied Physics · doi:10.1063/5.0302526 · Cited by 1
Optimizing nanoparticles from the gas phase for dispersions and inks for printed electronics
Mackert, V., Gebauer, J. S., Tzolov, D., Schulte, J., Sandmann, A., & Winterer, M. (2026) · Powder Technology · doi:10.1016/j.powtec.2026.122518 · Cited by 1
Chemistry in evaporating sessile droplets
Paul, S. O., & Chattopadhyay, A. (2026) · Chemical Communications · doi:10.1039/d6cc01128d · Cited by 1
Hybrid Fabrication of an Electrochemical Electrode via Inkjet Printing on 3D-Printed Substrates
Rahman, M. T., Bone, J., Roussel, T. J., Jenkins, J. L., & Huckaba, A. J. (2026) · ACS Omega · doi:10.1021/acsomega.5c12154 · Cited by 1
Shoji, E., Aizawa, K., Kusudo, H., & Biwa, T. (2026) · Advanced Materials Interfaces · doi:10.1002/admi.70546 · Cited by 1
Fukami, K., & Shoji, E. (2026) · European Journal of Mechanics - B/Fluids · doi:10.1016/j.euromechflu.2026.204596 · Cited by 1
“These advanced deposition techniques are essential for manufacturing printed electronics [52, 53], energy devices [54, 55], and the fabrication of biosensors and biomaterials [56, 57, 58, 59].”
Quenching-Controlled Crystal Orientation in Inkjet-Printed Wide-Bandgap Perovskites
Noh, E., Dang, H. W., Han, S. G., Kim, J., Hong, S., 신나혜, Lee, J. H., Chen, L., Lee, Y., & Seok, S. I. (2026) · ACS Energy Letters · doi:10.1021/acsenergylett.6c01417 · Cited by 1
Vijayan, A., Sanketh, H. S., Poornesh, P., Rao, A., & Nagaraja, K. K. (2026) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2026.111028 · Cited by 1
Yuksel, A., Yu, E. T., Cullinan, M. A., & Murthy, J. Y. (2020) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2020.3005339 · Cited by 1
“OVER the past decade, the ability to cheaply build custom electronics on a variety of substrates has allowed the field of printed electronics to make rapid advances [1]–[3].”
BackgroundInkjet TiO2-Based Sensors for Environmental Monitoring
di Diodoro, B., Bax, C., Langfelder, G., Bernasconi, R., Magagnin, L., Prudenza, S., & Capelli, L. (2021) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers50396.2021.9495748 · Cited by 1
Mechanical behavior of graphene conductive ink for wearable applications
Karamat, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85457-3.00016-5 · Cited by 1
Mou, Y., Liu, J., Wang, Q., Lei, Z., Chen, M., & Chen, M. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.133134 · Cited by 1
Oblique drop impact: can one infer the angle of impact?
Kern, V. R., Jin, C., Bostwick, J. B., & Steen, P. H. (2022) · Journal of Fluid Mechanics · doi:10.1017/jfm.2022.736 · Cited by 1
Direct Writing: Inkjet and Aerosol-Jet Printing
D’Angelo, P., & Vurro, D. (2022) · Springer eBooks · doi:10.1007/978-3-031-13779-2_5 · Cited by 1
Toxic risk assessment of engineered nanoparticles used in ink formulations
Singh, R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91145-0.00023-2 · Cited by 2
Ag Ink-Jet Printed CPW with Micro-Surface Cavities: Effects of Cavity Removal on RF Characteristics
Sim, S.-M., Yu, J.-H., Kim, J.-M., & Lee, S.-H. (2023) · SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC) · doi:10.1109/imoc57131.2023.10379718 · Cited by 1
“Inkjet printing is a versatile and cost-effective process that can be used to create a wide variety of electronic devices [1-2].”
BackgroundInkjet printed acrylate-urethane modified poly(3,4-ethylenedioxythiophene) flexible conductive films
Fiket, L., Božičević, M., Žagar, P., Jozić, D., & Katančić, Z. (2024) · Pure and Applied Chemistry · doi:10.1515/pac-2023-1020 · Cited by 1
Fast and Massive Pixel-Level Morphology Detection by Imaging Processing for Inkjet Printing
Zhang, H., Xu, D., Ke, S., Huang, M., Chai, Y., Lin, Y. H., Guo, Z., & Chen, Z. (2024) · Micromachines · doi:10.3390/mi15050606 · Cited by 1
“Recent advancements in various printing techniques, including photolithography, inkjet printing (IJP), and transfer printing (TP), have significantly contributed to the development of high-resolution electronic devices, such as QD-based micro-LEDs [6,7].”
BackgroundAn inkjet-printed rGO-PEI composite for CO2 monitoring working at room temperature
Afyouni, S., Enel, A., Hamoir, G., & Danlée, Y. (2024) · IEEE International Symposium on Olfaction and Electronic Nose (ISOEN) · doi:10.1109/isoen61239.2024.10555992 · Cited by 1
“Such flexible sensors offer several advantages over traditional ceramic-based sensors, including cost-effectiveness, reduced environmental impact, longer lifespans, low operating temperatures, and a lightweight compact design [8,9].”
BackgroundMorelli, L., Wadhwa, A., Cloutier, S. G., Bolduc, M., Gagnon, G., & Zednik, R. J. (2024) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ad9ec0 · Cited by 1
Comparison of Different Metal Additive Manufacturing Techniques for Biomedical Application
Skrodzka, M., Cieślak, A., Szymczyk‐Ziółkowska, P., Łabowska, M. B., Ducka, M., & Detyna, J. D. (2025) · Wiley eBooks · doi:10.1002/9781394287659.ch13 · Cited by 1
Local evaporation flux of deformed liquid dropsPreprint
Jia, P., Zhou, M., Yu, H., Lv, C., & Jing, G. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2108.07588 · Cited by 1
Production and Applications of Nanoparticles Grown or Deposited on Surfaces
McCormack, J. E. (2024) · Cronfa (Swansea University) · doi:10.23889/suthesis.67072 · Cited by 1
Additive and digital manufacturing of transient sensors and bioelectronics
Fumeaux, N. (2023) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-10307 · Cited by 2
Studies on nanoplastics for the preparation of reference materials
Hildebrandt, J. (2023) · publish.UP (University of Potsdam) · doi:10.25932/publishup-61710 · Cited by 1
INKJET PRINTING OF A GAS SENSOR
Dmonte, D. J., Šuly, P., Antoš, J., Urbánek, P., & Kuřitka, I. (2020) · NANOCOM ... · doi:10.37904/nanocon.2019.8574
“Inkjet-printing is known technique for printing electronic and optoelectronic materials on a large scale for fabricating RFID tags, antennas [3][4][5][6] thin-film transistors (TFTs) [7][8], solar cells [9][10], light-emitting devices (LEDs) [11][12], display devices [13], tissue engineering [14][15] and sensors [16][…”
MethodIoT-Based Laser-Inscribed Sensors for Electrochemical Detection of Phosphate Ions
Nag, A., Alahi, M. E. E., Afsarimanesh, N., & Mukhopadhyay, S. C. (2021) · Algorithms for intelligent systems · doi:10.1007/978-981-16-3368-3_8
Yermakov, M., Dobrozhan, O., Kakherskyi, S., Pshenychnyi, R., & Opanasyuk, A. (2021) · IEEE International Conference Nanomaterials: Applications & Properties (NAP) · doi:10.1109/nap51885.2021.9568597
Patterned macro-/microstructures based on colloidal droplets evaporation
Song, Y., Qin, M., & Li, J. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822425-0.00013-0
Processing of nano-micro copper materials for the production of conductive circuits
Abbas, B. (2021) · Cronfa (Swansea University) · doi:10.23889/suthesis.58697
Silicon-containing nanoparticles: from functional materials to real-life applications
Yin, S. (2021) · doi:10.3990/1.9789036553094 · Cited by 1
Inkjet-Printed Three-Electrode System on Flexible Substrate for Low-Cost Electrochemical Analysis
Pauco, J. L. R., & Enriquez, E. P. (2022) · Key engineering materials · doi:10.4028/p-426ih2
“Inkjet printing of electrochemical sensors is commonly based on the use of metal nanoparticle inks whose conducting properties exceed that of their bulk counterpart [4], [5].”
BackgroundNag, A., & Mukhopadhyay, S. C. (2022) · Smart sensors, measurement and instrumentation · doi:10.1007/978-3-030-99600-0_1
Real-time local muscle fatigue assessment using synaptic transistors
Pal, M. (2022) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/156001
Inkjet-printed Electronics Technology
(2022) · Royal Society of Chemistry eBooks · doi:10.1039/9781788019699-00069
Inkjet Printed PEDOT:PSS-based Source/Drain Electrodes for Organic Thin Film Transistors
Sarkar, S. K., Singh, M., & Gupta, D. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-19-0588-9_43
Lazić, B., Popović, B., & Poznanović, S. (2022) · Универзитет уметности у Београду, Факултет примењених уметности eBooks · doi:10.18485/smartart.2022.2.2.ch21
Direct Ink Writing of Touch Sensors and Displays
Sierros, K. A., & Cairns, D. R. (2023) · Wiley eBooks · doi:10.1002/9781118751077.ch18
Studying the Generation of Hot Electrons in Plasmonic Nanoparticle Monolayers
Baril, J. (2023) · Carleton University's Institutional Repository (MacOdrum Library, Carleton University) · doi:10.22215/etd/2023-15417
THE PREPARATION OF NANOPARTICLE FILMS BASED ON LIGHT WELDING TECHNOLOGY
Sun, M. B., Li, Y., Qian, S., & Chen, X. (2024) · Nanoscience and Technology An International Journal · doi:10.1615/nanoscitechnolintj.2024049728
Li, Y., Flynn, A., Masternick, C., Kolanovic, B., Li, B., & Li, B. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4725233
Impact of Nanoparticle Size and Loading on Printability of Composite Inks for Material ExtrusionPreprint
Li, Y., Flynn, A., Masternick, C., Kolanovic, B., Li, B., & Li, B. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4826971
Electromigration and electrical sintering in printed silver from high current at room temperature
Jung, U., & Wagner, R. (2024) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ad5454
Impact of Nanoparticle Size and Loading on Printability of Composite Inks for Material ExtrusionPreprint
Li, Y., Flynn, A., Masternick, C., Kolanovic, B., Li, B., & Li, B. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4853379
Additive and Fiber Nano-manufacturing of Multi-material, Dielectric Photonic Crystals
Iezzi, B. (2022) · Deep Blue (University of Michigan) · doi:10.7302/5979
Integration of Surface-Mount Devices in Microsystems Using Tracks Consisting of Nanoparticles
Mitteramskogler, T., Fuchsluger, A., Ecker, R., Lang, S., Wilfinger, T., Wille, R., & Jakoby, B. (2024) · IEEE Sensors Letters · doi:10.1109/lsens.2024.3460969
“While traditional semiconductor processes allow the fabrication of high-precision conductive tracks, inkjet printing has proven itself to be aviableflexiblelow-costoptionforthecreationofelectronicstructures [2],[3],[4],[5],[6].”
BackgroundKołczyk-Siedlecka, K., Bernasconi, R., Zabinski, P. R., & Magagnin, L. (2024) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-024-06093-0
Kusakabe, S., Katashima, T., Sakuma, I., & Akagi, Y. (2024) · Polymer Journal · doi:10.1038/s41428-024-00974-x
“Nanoparticle dispersions have a wide range of applications, including in the food industry [1, 2], pharmaceuticals [3, 4], cosmetics [5], inks [6, 7], and water treatment [8].”
Optimization Techniques for 3D‐Printed Electrochemical Sensors
Pratibha, S., Yashaswini, & Kumar, Y. B. V. (2025) · Wiley eBooks · doi:10.1002/9781394303434.ch6
Optical vortex laser drawing of silver nano-ink paste
Iwata, M., Kaneko, A., Yuyama, K., & Omatsu, T. (2025) · Optics Continuum · doi:10.1364/optcon.579626
Introduction to nanotechnology and its application in textile dyeing and printing
Nautiyal, A., Kidile, S., Ghadge, S., & Debnath, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-33435-1.00004-8
Nxele, S. R. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781837070244-00244 · Cited by 1
Sirinara, P., Patarapongsant, Y., Nilyai, S., Sooklert, K., Dissayabutra, T., Rojanathanes, R., & Sereemaspun, A. (2023) · Figshare · doi:10.6084/m9.figshare.22608409
Organic Transistor Integrated Circuits by Digital Printing
Matsui, H. (2024) · Journal of The Surface Finishing Society of Japan · doi:10.4139/sfj.75.372
Bauer, C. (2023) · Online Publication Service of Würzburg University (Würzburg University) · doi:10.25972/opus-31795
Eco-friendly and Scalable Fabrication of Organic Optoelectronic Sensors
Jan, J. (2024) · eScholarship (California Digital Library)
Montero Barriga, L. (2024) · RiuNet (Universitat Politècnica de València)
Reactive inkjet of quantum dot-silicone composites
Birchall, L. (2022) · Nottingham ePrints (University of Nottingham)
Exploring Paper as a Substrate for Printed Electronics
Renaud, L. J. (2023) · Scholarship at UWindsor (University of Windsor)
Inkjet printing of ZTO and AlOx solution combustion inks for electronic devices production
Moreira, P. G. (2022) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Three-dimensional inkjet printing of electrically active materials
Nelson-Dummett, O. (2025) · Nottingham ePrints (University of Nottingham)
PRINTED TRANSPARENT CONDUCTIVE OXIDES FOR ELECTRONIC APPLICATIONS
Pereira, T. F. P. V. D. M. (2023) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Naderi, P. (2024) · YorkSpace (York University)
Influence of annealing conditions on printed alumina thin film capacitors
Pereira, M. G. (2022) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Environmentally Low Impact Solutions for RFID Tags and RF Application
Cruz, B., Biebl, E., & München, T. U. (2024)
Hybrid Nanocomposite Materials for Supercapacitor Applications
Karthigaimuthu, D., Mourad, A. I., & Thangavel, E. (2026) · Modern aspects of electrochemistry · doi:10.1007/978-3-032-04593-5_8
РАЗРАБОТКА ЧЕРНИЛ НА ОСНОВЕ INGAZNO ДЛЯ ПЕЧАТНОЙ МИКРОЭЛЕКТРОНИКИ
Filalova, E., Пикулина, Е. В., Лошкарев, А. Н., Лошкарев, Е. И., Kameneva, E. I., Lizunova, A. A., & Иванов, В. В. (2025) · Nanoindustry Russia · doi:10.22184/1993-8578.2025.18.11s.700.704
Printing Methods and Integrated Strategies
Wu, W. (2026) · Wiley eBooks · doi:10.1002/9783527840052.ch3
Fully Inkjet Printed Carbon Nanotube Thin-Film Transistors for Large-Area Flexible Backplanes
Choudhury, P. K., Manoranjan, M., & Mohapatra, Y. N. (2026) · IEEE Journal on Flexible Electronics · doi:10.1109/jflex.2026.3659090
“Various methods such as inkjet printing [7], [8], [22], aerosol jet printing [23], [24], [25], and screen printing [26], [27] have been used to deposit CNT inks on flexible substrates.”
Nanotechnology in Paper Coating and Printing
Chaudhary, U., Gusain, R., Joshi, G., & Rana, V. (2026) · Smart nanomaterials technology · doi:10.1007/978-981-95-3473-9_6
Redshift phenomenon in the electroluminescence spectrum of nanodot matrix OLEDs
Zhao, W., Zhang, J.-W., You, Y., Song, J., Zhang, A., Li, X., & Song, B. (2026) · Polymer · doi:10.1016/j.polymer.2026.129686
Zhou, G., Wang, Y., Zhou, X.-P., Zhang, K., Yang, Z.-H., Jia, D.-C., & Zhou, Y. (2026) · Materials · doi:10.3390/ma19030628
Abri, A., & Maleki, A. (2026) · Main Group Chemistry · doi:10.1177/10241221261416292
“9 – 13 Polymer nanocomposites, characterized by a collection of discrete nanoparticles evenly distributed within a polymer matrix, represent the most prevalent category of nanocompo-sites.”
Yang, W., Mei, L., Yan, X., & Ma, Y. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.140016
Hydrodynamic effects in maximum bubble pressure tensiometry
Salvador, H., Wijshoff, H., van Brummelen, E. H., & Darhuber, A. A. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.140140
Femtosecond laser sintering of metal nanoparticles for high-performance flexible circuits
Yao, J., Luo, G., & Hu, Y. (2026) · Laser-based Micro- and Nanoprocessing · doi:10.1117/12.3081783
“Metal particle ink-based printing processes offers cost-effective, adaptable fabrication[5].”
Intelligent waveform estimation in piezoelectric inkjet printing for target droplet characteristics
Saleem, M. A., Xiao, X., Shehzad, A., Mamoon, S., Haghsefat, K., & Liu, T. (2026) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-026-02503-x
“The interaction of three primary forces (inertia, capillary, and viscous forces) underpins the governing principles of droplet generation [17].”
Digitally Printed Chipless RFID Tags Operating at Millimeter-Wave Based on Higher-Order Mode
de Amorim, R., & Perret, E. (2026) · IEEE Transactions on Antennas and Propagation · doi:10.1109/tap.2026.3670617
“The thermal transfer technique faces limitations due to the width of the lines that can be printed, which is restricted to (125 ± 25 µ m), as well as the spacing between traces (125 µ m) [14], [15], [16], [17].”
Characterization of sulfate-reducing biofilms using an amperometric printed H₂S sensor
Castro, R. (2026) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-457728
Platel, R. (2021) · theses.fr (ABES) · doi:10.70675/c8c7ea85zc55ez4758zaa6az89f129fe126f · Cited by 2
Synthesis of iron oxide nanoparticles and development of magnetic coatings by fluid processing
Darcheville, M. (2021) · theses.fr (ABES) · doi:10.70675/5efe90dazd98az41a8z95ebz4340601b0295
Rangra, A. (2021) · theses.fr (ABES) · doi:10.70675/e8996e67z09a9z4bcaza2b4zcd65599996df · Cited by 2
High‐Performance Direct Ink Writing of PEDOT : PSS ‐Based Conductive Inks for Flexible Electronics
Sun, Y., Wang, R., Xu, M., Yang, L., Liu, H., & Shi, X. (2026) · Polymers for Advanced Technologies · doi:10.1002/pat.70583
Zheng, Y., Tsukamoto, H., & Yonezawa, T. (2026) · ChemNanoMat · doi:10.1002/cnma.202500768
Lin, Y., Liu, Y., Kong, X., Li, J., Chen, Y., Cai, S., Zhou, Y., Zhang, T., Zhou, N., Guo, W., et al. (2026) · Small · doi:10.1002/smll.73661
Inkjet printing of ultrafine-bubble-added SiO2 nanoparticle suspensions for film morphology control
Shimizu, K., Isoya, T., Kono, T., & Kaneko, A. (2026) · Precision Engineering · doi:10.1016/j.precisioneng.2026.05.014
Gongora, G. P., dos Santos, N. R., Cusioli, L. F., Bergamasco, R., Rosa, S. L. F., & Lautenschlager, S. R. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.138708
A Vision Driven Framework for Droplet Monitoring and Feature Extraction in Inkjet Printing
Akter, S., Kamoldinov, A., Roy, A., Baker, G. A., & Haider, M. R. (2026) · IEEE Sensors Letters · doi:10.1109/lsens.2026.3705657
“In iJP process, microliter-scale droplets are selectively deposited onto substrate in predefined patterns [7].”
Zeng, T.-W., & Hsu, Y.-C. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7005149
Metadata
- Authors
- Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A.
- Affiliations
- Central Institute of Plastics Engineering and Technology (IN)
- Corresponding author
- Nayak, Laxmidhar
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 29
- Pages
- 8771-8795
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2952165706
- Semantic Scholar
- abb1ce77deddc05d0ca46a91ce5503ddbd17a48b
- Cited by
- 497
- References
- 176
- Citations by year
- 2026: 46 · 2025: 67 · 2024: 77 · 2023: 75 · 2022: 90 · 2021: 88 · 2020: 51 · 2019: 3
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Keywords
- inkjet printing, nanoparticle ink, flexible electronics, device fabrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.