A review on inkjet printing of nanoparticle inks for flexible electronics
The DOI matches its Crossref record; 173 of the 176 references it cites were found in a registry or an index.
Abstract
The recent progress, challenges and promising future of design and synthesis of inks and device fabrication by inkjet printing are reviewed and discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To eliminate these issues, some potential mass-processing technologies are emerging, such as laser-based processing,[249,617] roll-to-roll printing,[618,619] inkjet printing,[620] and other technologies for flexible electronics that offer excellent and consistent performance while ensuring fast, low-cost manufacturing.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [617]
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Research works printed but not linked: 11
- Chopra, 2014, Int. J. Comput. Sci. Inf. Technol., 6, 61
- Zhang, 2018, Adv. Condens. Matter Phys., 2018, 9795654
- Falkovsky, 2008, J. Phys.: Conf. Ser., 129, 012004
- Martin, 2008, J. Phys.: Conf. Ser., 105, 012001
- Reis, 2000, MRS Online Proc. Libr., 625
- Kang, 2010, J. Mater. Sci.: Mater. Electron., 21, 1213
- Dang, 2014, Adv. Nat. Sci.: Nanosci. Nanotechnol., 6, 015003
- Dang, 2012, Adv. Nat. Sci.: Nanosci. Nanotechnol., 3, 035004
- Rahimi, 2015, J. Phys.: Conf. Ser., 660, 012044
- Nguyen, 2011, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2, 035015
- Ji, 2018, J. Mater. Sci.: Mater. Electron., 29, 13032
Cited by
Items 301–400 of 519
Dobrozhan, O., Pshenychnyi, R., Vorobiov, S., Курбатов, Д. І., Komanický, V., & Opanasyuk, A. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2145-1 · Cited by 7
Preparation and Characterization of Ag2Se-based Ink Used for Inkjet Printing
Zhang, K., Zheng, Q., Wang, L., & Jiang, W. (2022) · Journal of Inorganic Materials · doi:10.15541/jim20220030 · Cited by 7
Controlling post-impact dynamics of ferrofluid droplets with magnetic field
Zhou, J.-X., Xiao, H.-W., Wang, Y.-P., Khan, A., Niu, X., Wen, M., Chen, M.-F., Li, D., & Yamaguchi, H. (2022) · Physics of Fluids · doi:10.1063/5.0128207 · Cited by 7
Atmospheric Pressure Plasma Jet Printing for Printed and Flexible Electronics
Meyyappan, M. (2025) · IEEE electron devices reviews. · doi:10.1109/edr.2025.3566007 · Cited by 6
“The leading printing techniques in most reported studies include screen printing [35], [36], inkjet printing [37], [38], [39], [40], [41], [42], [43] and aerosol jet printing [44], [45], [46], [47], [48].”
Shoji, E., Saito, T., Biwa, T., Kubo, M., Tsukada, T., Tomai, T., & Adschiri, T. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.138246 · Cited by 6
Rharbi, Y., Faure, V., Blayo, A., Magnin, A., & Denneulin, A. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.139703 · Cited by 6
Lim, T., Lee, H.-L., Ryu, K., Moon, Y.-J., Hwang, J. Y., & Moon, S. J. (2024) · Applied Physics A · doi:10.1007/s00339-024-07352-7 · Cited by 6
“Inkjet printing technology is advantageous for manufacturing electronic circuits on flexible polymer substrates [8–10].”
Fabrication and inkjet printing of manganese oxide electrodes for energy storage
Nyabadza, A., Titus, A., McCarthy, É., Azoulay-Younes, L., Ryan, S., Sreenilayam, S. P., Nicolosi, V., Vázquez, M., & Brabazon, D. (2025) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2025.100761 · Cited by 6
Mesbah, Y. I., Hassan, R. K., & Allam, N. K. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c03606 · Cited by 6
Direct Modular Printing of Plasmonic Chemosensors
Becerril‐Castro, I. B., Calderón, I., Ockova, J., Liebel, M., van Hulst, N. F., Giannini, V., & Álvarez‐Puebla, R. A. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c17202 · Cited by 6
Plasmonic Cross‐Reactive Sensing Noses and Tongues
Calderón, I., Becerril‐Castro, I. B., Zorlu, T., Özdemir, B., García‐Rico, E., Baulin, V. A., & Álvarez‐Puebla, R. A. (2024) · ChemPlusChem · doi:10.1002/cplu.202400210 · Cited by 6
Neagu, A.-L., Gavrilă, A.-M., Miron, A., Neblea, I. E., Zaharia, C., Epure, P. P., Brisset, H., Iovu, H., Sârbu, A., & Iordache, T. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.145044 · Cited by 6
Electrofluidic displays based on inkjet printing and phase change filling
Guo, Y., Yan, J., Shen, Z., Jiang, H., Tang, B., Deng, Y., Henzen, A., Zhou, R., & Zhou, G. (2020) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ab9e50 · Cited by 6
Hybrid Colloidal Quantum Dot:Metal-Oxide Nanocrystal Ink for Efficient Solar Energy Conversion
Choi, J., Si, M., Kim, S.-H., Maniyamgama, N., Kim, D.-E., Jee, S., Kim, Y. H., Jeong, H.-S., Kim, B., Kim, C., et al. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.155804 · Cited by 6
Introduction to smart multifunctional metal nano-inks
Shabbir, M. K., Syed, A. S., Thebo, K. H., & Akhtar, J. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91145-0.00007-4 · Cited by 6
Tiwari, A., Shin, S., Lee, S. J., & Thokchom, A. K. (2023) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2023.100740 · Cited by 6
Nowak, A. P., Gross, A. F., Sherman, E., Rodriguez, A. R., Ventuleth, M., Nelson, A. M., Sorensen, A., Mott, R. P., & Graetz, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.123279 · Cited by 6
Effect of ink formulation on the inkjet printing process of Al–ZnO nanoparticles
Shavdina, O., Grillot, C., Stolz, A., Giovannelli, F., Bertagna, V., Nicolle, J., Vautrin‐Ul, C., Boulmer-Leborgne, C., & Semmar, N. (2021) · Journal of Coatings Technology and Research · doi:10.1007/s11998-020-00427-z · Cited by 6
Lemarchand, J., Bridonneau, N., Battaglini, N., Carn, F., Mattana, G., Piro, B., Zrig, S., & Noël, V. (2022) · Angewandte Chemie · doi:10.1002/ange.202200166 · Cited by 6
Microstructure engineering and conductivity optimization in silver films via Mixed Amine-MOD Ink
Dong, Y., Dong, Y., Tang, X., Xu, Z., Ke, X., Hui, Z., & Wang, X. (2025) · Synthetic Metals · doi:10.1016/j.synthmet.2025.117951 · Cited by 5
Wireless power transfer topology analysis for inkjet-printed coil
Sahu, P. K., Jena, S., Behera, S., Sahu, M. M., Prusty, S. R., & Dash, R. K. (2022) · Open Engineering · doi:10.1515/eng-2022-0040 · Cited by 5
Drzic, J., Escudero, A., González‐García, L., & Kraus, T. (2023) · Inorganic Chemistry Frontiers · doi:10.1039/d2qi02722d · Cited by 5
Surfactant-Tunable Nanoparticle Assembly via a Template-Directed Strategy
Wang, X., Wu, J., Zhang, Z., & Xiong, G. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c00116 · Cited by 5
Dilsen, M., Ipekcı, H. H., & Uzunoğlu, A. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01086-7 · Cited by 6
In-situ tension investigation of additively manufactured silver lines on flexible substrates
Lee, S.-J., Ahmadi, Z., Paul, M., Mahjouri‐Samani, M., Shao, S., & Shamsaei, N. (2023) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2023.100171 · Cited by 5
Cerón, S., Barba, D. T., & Domínguez, M. A. (2024) · Electronic Materials · doi:10.3390/electronicmat5020004 · Cited by 5
“Last but not least, as no additional sintering and/or thermal processes are needed to eliminate the organic stabilizers and their residual products, this reactant is more suitable for flexible electronics, where most of the substrates can become drastically distorted above 70 ◦ C [1,7,18].”
BackgroundImpact of Nanoparticle Size and Loading on Printability of Composite Inks for Direct Ink Writing
Li, Y., Flynn, A., Masternick, C., Kolanovic, B., Li, B., & Li, B. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202401443 · Cited by 5
Effect of Oxalic Acid Treatment on Conductive Coatings Formed by Ni@Ag Core–Shell Nanoparticles
Pajor-Świerzy, A., Pawłowski, R., Sobik, P., Kamyshny, A. L., & Szczepanowicz, K. (2022) · Materials · doi:10.3390/ma15010305 · Cited by 5
“Therefore, the development of alternative sintering methods focusing mainly on avoiding the destruction of the flexible substrate and enabling fast and efficient fabrication of conductive coatings has attracted great interest in recent years [11,12].”
BackgroundFacile one-pot synthesis of bimodal-sized nickel nanoparticles in a solvent-directed reaction system
Liu, S., Tam, S. K., & Ng, K. M. (2022) · Journal of Nanoparticle Research · doi:10.1007/s11051-022-05520-5 · Cited by 5
Ultraprecise Deposition of Micrometer-Size Conductive Features for Advanced Packaging
Wiatrowska, A., Kowalczewski, P., Fiączyk, K., Witczak, Ł., Gadzalińska, J., Łysień, M., Schneider, L., Kosior, Ł., & Granek, F. (2022) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc51906.2022.00251 · Cited by 5
Nyabadza, A., Chatterjee, S., Muthusamy, S. P., Ryan, S., Santos, J., Nicolosi, V., Brabazon, D., & Vázquez, M. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.07.120 · Cited by 4
Tang, S., Zhan, H., Zhang, Y., Zhang, Y., & Shen, Y. (2025) · IEEE Access · doi:10.1109/access.2025.3594274 · Cited by 5
“Inkjet printing, as a non-contact, material-conserving digital manufacturing technology, has attracted significant attention for its ability to achieve controlled deposition of functional materials in liquid phase [3], [4].”
Printed Zinc Tin Oxide Memristors for Reservoir Computing
Martins, R. A., Silva, C., Deuermeier, J., Milano, G., Rosero‐Realpe, M., Parreira, C., Fortunato, E. M. C., Martins, R., Kiazadeh, A., & Carlos, E. (2025) · Advanced Intelligent Systems · doi:10.1002/aisy.202500450 · Cited by 5
Unveiling the deposition mechanism of ultra-thin graphene oxide flakes in an aqueous colloidal phase
Kim, J., Park, S., Choi, M., Lee, H., & Kim, S. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.164307 · Cited by 5
Carpio, A. R. E., Juan, L. M. Z. D., & Corpuz, R. D. (2025) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.70133 · Cited by 4
Lall, P., Kulkarni, S., Goyal, K., & Miller, S. (2023) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm55368.2023.10177588 · Cited by 4
“These methods include Inkjet Printing, Aerosol Jet Printing, and Electrohydrodynamic (EHD) Jet Printing.”
BackgroundAmrillah, T., Jazeera, L. J. A., Djojo, V. M., Sutrisno, D. S. T., Wulan, N. I., Agam, Y. A., Mauludin, M. F. A., Rafael, A., & Firdaus, Y. (2025) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2025.109550 · Cited by 4
Nelson-Dummett, O., Whittaker, T., Whittow, W. G., Wojcik, J., Reyes-Luna, J. F., McCall, C., Koca, A., Tuck, C. J., Hague, R., & Turyanska, L. (2025) · Materials Today Advances · doi:10.1016/j.mtadv.2025.100584 · Cited by 4
Hayati-Roodbari, N., Wheeldon, A., Fian, A., & Trattnig, R. (2022) · physica status solidi (a) · doi:10.1002/pssa.202200089 · Cited by 4
Stable Gold Nanoparticle Colloids for Inkjet Printing Conductive Films
Rahman, M. T., Cramer, J., Noor, M. I., Rottmann, P. F., & Huckaba, A. J. (2025) · Surface and Interface Analysis · doi:10.1002/sia.70006 · Cited by 4
“Inkjet printing of metallic particles and their applications in various field is prevalent in the literature [12–15].”
Golkhatmi, S. Z., Lund, P. D., & Asghar, M. I. (2023) · Materials Advances · doi:10.1039/d3ma00352c · Cited by 4
Semi-transparent 3D microelectrodes buried in fused silica for photonics applications
Guduru, S. S. K., Bucella, S. G., Bonfadini, S., Vishnubhatla, K. C., Caironi, M., & Criante, L. (2021) · Optics Express · doi:10.1364/oe.433330 · Cited by 4
Chandel, G. R., Sun, J., Etha, S. A., Zhao, B., Sivasankar, V. S., Nikfarjam, S., Wang, M., Hines, D. R., Dasgupta, A., Woehl, T. J., et al. (2023) · Nanotechnology · doi:10.1088/1361-6528/acd9d2 · Cited by 3
Choi, H., Park, W., Lee, Y., Tam, K. C., & Wong, W. S. (2024) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ad1e2b · Cited by 3
High-precision silver electrode based on PEN substrate with robust mechanical performance
Hou, M., Wei, X., Yao, R., Huang, Y., Zhou, R., Zhang, K., Jiang, B., Zhang, Z., Ning, H., & Peng, J. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.105158 · Cited by 3
Laser-patterned Kirigami on conductive composites as multimodal sensors
Harija, H., Prokopchuk, A., Langer, E., Chakaraborthy, A., Saran, B., Majumdar, P., Nag, A., Richter, A., & Altinsoy, M. E. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.117039 · Cited by 3
Ink-based disposable electrodes: Versatile analytical platforms for point-of-need applications
Junior, G. J. S., Ramos, R. M., Veloso, W. B., Filho, L. A. P., & Paixão, T. R. L. C. (2025) · Euchembioj Reviews · doi:10.62063/rev-28 · Cited by 3
“Metal precursors may be provided either as dispersions of metal nanoparticles in water, organic solvents, or water/solvent mixtures, or in the form of nanopowders (Nayak et al., 2019).”
Ahmad, W., Tarique, M., Abbas, R., Ahmad, I., Qayyum, F., Yu, S., & Wei, J. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.187125 · Cited by 3
Process and mechanism of depositing silver paste spot via laser-induced forward transfer
Xiang, J., Deng, Y., Cen, Z., Zeng, Z., Li, S., & Tsui, C. P. (2024) · Journal of Laser Applications · doi:10.2351/7.0001400 · Cited by 3
Inkjet-printed strain sensors for monitoring cylindrical pressure vessels
Nouchokgwe, Y., Granzow, T., Girod, S., Gergen, S., Bouton, O., Defaÿ, E., Kovacova, V., & Glinšek, S. (2025) · APL Electronic Devices · doi:10.1063/5.0279607 · Cited by 3
Khan, A. S., Prathumrat, P., Likitaporn, C., Wongsalam, T., Tanalue, N., Nichakornpong, N., & Okhawilai, M. (2025) · Synthetic Metals · doi:10.1016/j.synthmet.2025.118003 · Cited by 4
Nanocomposite of nanocellulose with metal nanoparticles for printable and flexible electronics
Pottathara, Y. B., & Kawasaki, H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822350-5.00009-6 · Cited by 4
Pulsed laser ablation in liquid (PLAL) for nanoparticle generation
Freeland, B. H., McCarthy, É., Sreenilayam, S. P., Foley, G., & Brabazon, D. (2021) · Institute of Physics eBooks · doi:10.1088/978-0-7503-1683-5ch8 · Cited by 5
Insights into the Electrical Characterization of Graphene-like Materials from Carbon Black
Ferraiuolo, R., Alfè, M., Gargiulo, V., Pepe, G. P., Tafuri, F., Pezzella, A., Ausanio, G., & Montemurro, D. (2022) · Coatings · doi:10.3390/coatings12111788 · Cited by 3
Flexible Tactile Sensors Based on 3D Printed Moulds
Chakraborthy, A., Nuthalapati, S., Escher, R., Nag, A., & Altinsoy, M. E. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-3-031-29871-4_43 · Cited by 3
Sustainable bioelectronics fabrication through photo-induced swelling of green hydrogels
Agate, S., Lucia, L. A., & Pal, L. (2023) · Materials Today Electronics · doi:10.1016/j.mtelec.2023.100088 · Cited by 3
Inkjet‐printed flexible MXetronics : Present status and future prospects
Rajavel, K., & Das, S. R. (2024) · Applied Research · doi:10.1002/appl.202300085 · Cited by 3
Thakur, N., Thomas, N., Koshy, A. M., Swaminathan, P., & Murthy, H. (2024) · Journal of Electronic Materials · doi:10.1007/s11664-024-10984-3 · Cited by 3
On-Substrate Preparation of a Poly(triphenylamino azomethine) for Electrochromic Devices
Filiatrault, H. L., Muras, K., Wałęsa‐Chorab, M., & Skene, W. G. (2024) · Polymers · doi:10.3390/polym16172440 · Cited by 3
“For example, the requirement of inks is they must be of an appropriate viscosity [32].”
BackgroundPaper-based thermoelectric generators for viable waste heat harvesting
Das, S., Mondal, B. P., & Datta, A. (2024) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ad8660 · Cited by 3
“Printing techniques offer a wide range of possibilities for integrating different materials with paper substrates, enabling the fabrication of innovative and functional products for various applications [68–70].”
Fabrication of Metal Oxide Nanostructures by Materials Printing
Dzik, P., Veselý, M., & Diwald, O. (2021) · Wiley eBooks · doi:10.1002/9781119436782.ch7 · Cited by 3
Drop feature optimization for fine trace inkjet printing
Mohan, N., Bhogaraju, S. K., Łysień, M., Schneider, L., Granek, F., Lux, K., & Elger, G. (2021) · European Microelectronics and Packaging Conference · doi:10.23919/empc53418.2021.9585004 · Cited by 3
Khinda, G. S., Kokash, M. Z., Alhendi, M., Garakani, B., Stoffel, N. C., Børgesen, P., & Poliks, M. D. (2022) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ac5e0e · Cited by 3
An Inkjet-Printed Stretchable Sensor Patch for Multimodal Physiological Monitoring
Ling, W., Shang, X., Liu, J., & Tang, T. (2024) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors60989.2024.10784663 · Cited by 2
“Among them, inkjet printing has emerged as a promising candidate for fabricating flexible devices due to its versatile nature, rapid prototyping capabilities, and superb compatibility with soft materials [19-21].”
Chen, C., Liu, C., Quan, H., Shi, Y., Han, Y., Chai, Y., Dong, H., & Wang, J. (2025) · Journal of Electronic Materials · doi:10.1007/s11664-025-11924-5 · Cited by 2
“A larger contact angle can more effectively impede the diffusion of ink, 22,23 preserve the width of the printed silver electrode, and yield a superior line configuration.”
Ligand‐Engineered Cu@Ni Core‐Shell Nanoparticles with Excellent Performance for Printed Electronics
Wang, X., Lu, D., Luo, Z., Lian, Z., Li, Y., Pan, H., Miao, X., Xin, M., Xu, J. C., Song, L., et al. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500585 · Cited by 2
Nanocarbon Conductive Ink from Food Waste for Printed Resistive Loads
Coco, G., Galli, V., Rossi, P., Damasceno, J. P. V., Annese, V. F., & Caironi, M. (2025) · International Workshop on Advances in Sensors and Interfaces (IWASI) · doi:10.1109/iwasi66786.2025.11121968 · Cited by 2
“Commonly used conductive inks are based on metallic nanoparticles [4], conductive polymers [5], or carbon-based materials (e.g., graphitic materials) [6, 7].”
Popovetskiy, P., Chubar, V. S., & Sulyaeva, V. S. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138109 · Cited by 2
Kim, S., Won, D., Yoo, D., & Kim, J. (2025) · Small · doi:10.1002/smll.202506786 · Cited by 2
Fully inkjet printed flexible SWCNT based TFT: Impact of traps on characteristics
Manoranjan, M., Choudhury, P. K., & Mohapatra, Y. N. (2025) · APL Electronic Devices · doi:10.1063/5.0297245 · Cited by 2
Ultra‐Durable Information‐Encoded Anti‐Counterfeiting Self‐Assembled Nanocrystal Labels
Haddadifam, T., Shabani, F., Kalay, M., Khaligh, A., Mutlugün, E., Önses, M. S., & Demir, H. V. (2025) · Advanced Optical Materials · doi:10.1002/adom.202502884 · Cited by 2
Nanoparticles in printed photovoltaics: Materials, methods and potential
Zhang, H., Mielke, L. N., Sychev, D., Sun, N., Hermes, I., Schlicke, H., & Lissel, F. (2025) · Materials Today Energy · doi:10.1016/j.mtener.2025.102054 · Cited by 2
A Low-Cost Wearable Flexible Sensor with an Ag-hBN Interface for Respiratory Monitoring
Adry, T. Z., Sharmin, S., ISLAM, S. K., & Haider, M. R. (2025) · International Workshop on Biomedical Applications, Technologies and Sensors (BATS) · doi:10.1109/bats67559.2025.11336178 · Cited by 2
Hung, P. Q., Li, Q., Chen, T., Wu, X., Fu, C.-T., Han, Y., Wu, R., Yan, G., Fan, Q., Zhao, Y., et al. (2026) · Materials Horizons · doi:10.1039/d5mh02110c · Cited by 2
Guo, J., Qiu, X., Zhang, R., Han, Q., Deng, L., Lu, Y., Zhao, Z., Li, M., Kama, W., Ma, J., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78645 · Cited by 2
Inkjet-Printed Capacitive Micromachined Ultrasonic Transducer (CMUT) for Moisture Sensing
Zheng, Z., Kim, N., Wang, J., Wong, W. S., & Yeow, J. T. W. (2020) · IEEE International Conference on Nano/Micro Engineered and Molecular Systems · doi:10.1109/nems50311.2020.9265591 · Cited by 2
“Materials that are compatible with the inkjet printing technique include semiconducting polymers [11], nanoparticles [12], and 2D materials like graphene-based materials [13].”
BackgroundSels, A., Blum, R., Chandran, R., Montinaro, E., Schildknecht, J., Chabart, M., & Subramanian, V. (2023) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/acd3fb · Cited by 2
Synthesis and characterization of perovskite-based QDs, 1D, 2D, and hierarchical nanomaterials
Naik, K. K. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99529-0.00003-5 · Cited by 2
Callis, T. W., Hu, K., Jamal, H. A., & Tentzeris, M. M. (2024) · International Journal of High Speed Electronics and Systems · doi:10.1142/s0129156424400664 · Cited by 2
Reverse Micelle Synthesis of Metal Oxides
Chernukha, A. S., Zirnik, G. M., Matveev, K. V., Boleiko, Y. V., Markin, T. A., Anannikov, E. S., Loshkarev, A. A., Gudkova, S. A., & Винник, Д. А. (2025) · Journal of Structural Chemistry · doi:10.1134/s0022476625030138 · Cited by 2
“It was established that particles utilized for ink preparation should not be larger than 50-200 nm [50-52] in order to obtain stable suspensions [51], increase the nozzle lifecycle (in inkjet and aerosol printing) [53], while achieving sufficient resolution in transistor printing.”
Facile method for printing reliable sliver patterns on polymer film
Hu, S., Zhu, W., Yang, W., Ji, H., & Li, M. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.131551 · Cited by 2
Advanced Functional Membranes for Sensor Technologies
Hernandez-Martinez, A. R. (2022) · Materials research foundations · doi:10.21741/9781644901816-10 · Cited by 2
Nanomaterials-based disposable electrochemical devices for point-of-care diagnosis
Mohan, A. M. V. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85725-3.00025-8 · Cited by 2
Kakherskyi, S., Pshenychnyi, R., Dobrozhan, O., Vaziev, J. G., Opanasyuk, A., & Gnatenko, Y. P. (2022) · Acta Physica Polonica A · doi:10.12693/aphyspola.141.487 · Cited by 2
Spatial control of the conductivity in SrTiO 3 -based heterointerfaces using inkjet printing
Hvid-Olsen, T., Gadea, C., Holde, F. B., Hoffmann, K., Jespersen, T. S., Grove‐Rasmussen, K., Trier, F., & Christensen, D. V. (2022) · Journal of Physics Energy · doi:10.1088/2515-7655/ac9084 · Cited by 2
Electrostatically Driven Vertical Combinatorial Patterning of Colloidal Nano-Objects
Petit, G., Hernandez, R., Raffy, S., Cuche, A., Marina, L. S., D’Amico, M., Palleau, É., & Ressier, L. (2023) · Colloids and Interfaces · doi:10.3390/colloids7010006 · Cited by 2
Voigt, C., Petersen, M., Thielen, N., Utsch, D., Häußler, F., Kirchberger, M., & Franke, J. E. (2023) · International Spring Seminar on Electronics Technology · doi:10.1109/isse57496.2023.10168387 · Cited by 2
“[14, 15] The technology presents potential for administering SMD processcompliant connective media for fine pitch SMD components.”
BackgroundInline photonic curing of inkjet printed cobalt ferrite-barium titanate nanocomposites
Flynn, W. P., Garnsey, S., Armijo, M. B., Bhalla, A. S., & Guo, R. (2023) · doi:10.1117/12.2677949 · Cited by 2
“…properties (jetting), substrate/ink interactions (wetting), evaporation pattern and post-processing requirements (annealing, calcining, etc.) 20,21 The ink formulation presented here is developed based on our previous research that evaluated the dispersion, polar and hydrogen bonding…”
BackgroundThe effects of pattern screen surface deformation on deflectometric measurements: a simulation study
Allgeier, S., Gengenbach, U. K., Köhler, B., Reichert, K., & Hagenmeyer, V. (2021) · Automated Visual Inspection and Machine Vision · doi:10.1117/12.2591877 · Cited by 1
Energy Harvesting in IoT-Enabled Flexible Sensors: Smart Sensing and Secure Access Control
Pal, S., & Nag, A. (2022) · Smart sensors, measurement and instrumentation · doi:10.1007/978-3-030-99600-0_9 · Cited by 1
Jang, J. W., Lee, J.-H., Youn, H. J., & Lee, H. L. (2023) · BioResources · doi:10.15376/biores.18.1.1279-1292 · Cited by 1
Investigation of Key Parameters for Syringe-printing of Nano-silver Paste
Yun, H., & McCluskey, P. (2023) · IMAPSource Proceedings · doi:10.4071/001c.89959 · Cited by 1
“The corresponding relations are given by [6] and [7].”
BackgroundMethodDimitriou, E., & Michailidis, N. (2024) · European Journal of Materials · doi:10.1080/26889277.2024.2316918 · Cited by 1
“The spherical shape of the nanoparticles possesses the lowest energy, hence, easing long-term colloidal stability of the suspensions (El Badawy et al., 2010; Hon et al., 2008; Nayak et al., 2019).”
Feng, J., Xing, B., & Li, K. (2024) · Materials Express · doi:10.1166/mex.2024.2683 · Cited by 1
Reliable transfer enabled by UV-curable stamp with tunable rigidity
Chen, L., Niu, Y., Liu, C., Fan, R., Liu, P., Ma, D., Zhang, X., Liu, C., & Duan, H. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.105348 · Cited by 1
Printed RF Contact CPW Sensor for Liquid Detection and Sensing
Hassan, A., Ali, S., Khan, A., & Bermak, A. (2024) · doi:10.1109/icm63406.2024.10815708 · Cited by 1
Bubble Printing of Anisotropic Clay Nanotubes
Hotton, C., Nicolas, P. E., & Hill, E. H. (2025) · Advanced Optical Materials · doi:10.1002/adom.202500373 · Cited by 1
Natural Biopolymer Materials for Flexible Implantable Electronics
Yang, T., & Ma, L. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781837676712-00187 · Cited by 1
Integrated Multifunctional Flexible Sensing System for Soil Nitrate Monitoring
Chen, K., Kachhadiya, J., Muhtasim, S., Cai, S., Huang, J., & Andrews, J. B. (2024) · IEEE Conference on AgriFood Electronics (CAFE) · doi:10.1109/cafe63183.2024.11069315 · Cited by 1
Comparison of different experimental methods for measuring droplet size in inkjet printing
Hu, Y., Shin, D. Y., Moon, Y. J., Kim, J., & Kang, K.-T. (2025) · Journal of Measurements in Engineering · doi:10.21595/jme.2025.24880 · Cited by 1
Metadata
- Authors
- Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A.
- Affiliations
- Central Institute of Plastics Engineering and Technology (IN)
- Corresponding author
- Nayak, Laxmidhar
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 29
- Pages
- 8771-8795
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2952165706
- Semantic Scholar
- abb1ce77deddc05d0ca46a91ce5503ddbd17a48b
- Cited by
- 497
- References
- 176
- Citations by year
- 2026: 46 · 2025: 67 · 2024: 77 · 2023: 75 · 2022: 90 · 2021: 88 · 2020: 51 · 2019: 3
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Keywords
- inkjet printing, nanoparticle ink, flexible electronics, device fabrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.