A review on inkjet printing of nanoparticle inks for flexible electronics
The DOI matches its Crossref record; 173 of the 176 references it cites were found in a registry or an index.
Abstract
The recent progress, challenges and promising future of design and synthesis of inks and device fabrication by inkjet printing are reviewed and discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To eliminate these issues, some potential mass-processing technologies are emerging, such as laser-based processing,[249,617] roll-to-roll printing,[618,619] inkjet printing,[620] and other technologies for flexible electronics that offer excellent and consistent performance while ensuring fast, low-cost manufacturing.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [617]
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Research works printed but not linked: 11
- Chopra, 2014, Int. J. Comput. Sci. Inf. Technol., 6, 61
- Zhang, 2018, Adv. Condens. Matter Phys., 2018, 9795654
- Falkovsky, 2008, J. Phys.: Conf. Ser., 129, 012004
- Martin, 2008, J. Phys.: Conf. Ser., 105, 012001
- Reis, 2000, MRS Online Proc. Libr., 625
- Kang, 2010, J. Mater. Sci.: Mater. Electron., 21, 1213
- Dang, 2014, Adv. Nat. Sci.: Nanosci. Nanotechnol., 6, 015003
- Dang, 2012, Adv. Nat. Sci.: Nanosci. Nanotechnol., 3, 035004
- Rahimi, 2015, J. Phys.: Conf. Ser., 660, 012044
- Nguyen, 2011, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2, 035015
- Ji, 2018, J. Mater. Sci.: Mater. Electron., 29, 13032
Cited by
Abdollahi, A., Roghani-Mamaqani, H., Razavi, B., & Salami-Kalajahi, M. (2020) · ACS Nano · doi:10.1021/acsnano.0c07289 · Cited by 643
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
“The advantage of this technology is to minimize wastage, environmentally friendly, and postprocessing is minimized [53].”
BackgroundFlexible Electronics: Status, Challenges and Opportunities
Corzo, D., Tostado-Blázquez, G., & Baran, D. (2020) · Frontiers in Electronics · doi:10.3389/felec.2020.594003 · Cited by 391
“Nonetheless, many challenges to be addressed by future research include the formation of fracture paths and selfhealing as a form of mitigation, the formation of oxides and passivation pathways, as well as methods to simplify the synthesis and preparation of inks (Nayak et al., 2019).”
MethodRecent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Printable Smart Materials and Devices: Strategies and Applications
Su, M., & Song, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00303 · Cited by 312
Direct ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Recent progress in carbon-based nanomaterials: critical review
Ayanda, O. S., Mmuoegbulam, A. O., Okezie, O., Durumin Iya, N. I., Mohammed, S. E., James, P. H., Muhammad, A. B., Unimke, A. A., Alim, S. A., Yahaya, S. M., et al. (2024) · Journal of Nanoparticle Research · doi:10.1007/s11051-024-06006-2 · Cited by 254
“These characteristics make it possible for CNTs to transmit large currents with minimal heating [6, 40–44].”
Smart polymers and nanocomposites for 3D and 4D printing
Falahati, M., Ahmadvand, P., Safaee, S., Chang, Y.-C., Lyu, Z., Chen, R., Li, L., & Lin, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2020.06.001 · Cited by 245
Bao, E., Ren, X., Wu, R., Liu, X., Chen, H., Li, Y., & Xu, C. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.06.098 · Cited by 217
Droplet‐Based Techniques for Printing of Functional Inks for Flexible Physical Sensors
Abdolmaleki, H., Kidmose, P., & Agarwala, S. (2021) · Advanced Materials · doi:10.1002/adma.202006792 · Cited by 205
Chen, T., Wang, Y., Yang, Y., Huang, F., Zhu, M., Ang, B. T. W., & Xue, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101607 · Cited by 205
The Recent Progress on Silver Nanoparticles: Synthesis and Electronic Applications
Bouafia, A., Laouini, S. E., Ahmed, A. S. A., Soldatov, A. V., Algarni, H., Feng Chong, K., & Ali, G. A. M. (2021) · Nanomaterials · doi:10.3390/nano11092318 · Cited by 186
“The detailed procedures for printing nanomaterials have been reviewed in the literature [140,141].”
BackgroundWang, X., Zhang, M., Zhang, L., Xu, J., Xiao, X., & Zhang, X. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103263 · Cited by 187
Orts Mercadillo, V., Chan, K. C., Caironi, M., Athanassiou, A., Kinloch, I. A., Bissett, M., & Cataldi, P. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204772 · Cited by 187
Advances on Emerging Materials for Flexible Supercapacitors: Current Trends and Beyond
Benzigar, M. R., Dasireddy, V. D. B. C., Guan, X., Wu, T., & Liu, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002993 · Cited by 191
Rahman, M., Islam, K. S., Dip, T. M., Chowdhury, M. F. M., Debnath, S. R., Hasan, S. M. M., Sakib, M. S., Saha, T., Padhye, R., & Houshyar, S. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00514-8 · Cited by 170
“Solvent blending involves dispersing NMs in a solvent, mixing them with the feedstock material, followed by the removal of the solvent through evaporation or drying [12].”
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Xu, W., Jambhulkar, S., Ravichandran, D., Zhu, Y., Kakarla, M., Nian, Q., Azeredo, B., Chen, X., Jin, K., Vernon, B., et al. (2021) · Small · doi:10.1002/smll.202100817 · Cited by 168
Additive Manufacturing of 3D Aerogels and Porous Scaffolds: A Review
Tetik, H., Wang, Y., Sun, X., Cao, D., Shah, N., Zhu, H., Qian, F., & Lin, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103410 · Cited by 154
Wen, D., Wang, X., Liu, L., Hu, C. F., Sun, C. G., Wu, Y., Zhao, Y., Zhang, J., Liu, X., & Ying, G. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c00724 · Cited by 153
Recent Progress in Wearable Biosensors: From Healthcare Monitoring to Sports Analytics
Ye, S., Feng, S., Huang, L. J., & Bian, S. (2020) · Biosensors · doi:10.3390/bios10120205 · Cited by 161
“Polyethylene terephthalate (PET) is characterized by lightweight and can serve as a flexible substrate for ink-jet printed electronics [93].”
BackgroundLemarchand, J., Bridonneau, N., Battaglini, N., Carn, F., Mattana, G., Piro, B., Zrig, S., & Noël, V. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202200166 · Cited by 150
Flexible and Stretchable Electrically Conductive Polymer Materials for Physical Sensing Applications
Lin, J.-C., Liatsis, P., & Alexandridis, P. (2022) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2022.2059673 · Cited by 157
“, conducting polymers, metal NPs, metal NWs, CNTs, graphene, and hybrid materials) is available, and controllable usage of conductive ink contributes to reasonable cost.([298,302])”
BackgroundRecent developments in nanotechnology-based printing electrode systems for electrochemical sensors
Ambaye, A. D., Kefeni, K. K., Mishra, S. B., Nxumalo, E. N., & Ntsendwana, B. (2020) · Talanta · doi:10.1016/j.talanta.2020.121951 · Cited by 156
Multifunctional flexible and stretchable electrochromic energy storage devices
Manjakkal, L., Pereira, L., Kumi‐Barimah, E., Grey, P., Franco, F. F., Lin, Z., Jose, G., & Hogg, R. A. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101244 · Cited by 146
Surface and Interface Designs in Copper-Based Conductive Inks for Printed/Flexible Electronics
Tomotoshi, D., & Kawasaki, H. (2020) · Nanomaterials · doi:10.3390/nano10091689 · Cited by 137
Balkourani, G., Brouzgou, A., & Tsiakaras, P. E. (2023) · Carbon · doi:10.1016/j.carbon.2023.118281 · Cited by 133
Smart biosensors and intelligent devices for salivary biomarker detection
Zheng, X., Zhang, F., Wang, K., Zhang, W., Li, Y., Sun, Y. L., Sun, X., Li, C., Dong, B., Wang, L., et al. (2021) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2021.116281 · Cited by 134
Multi-material vat photopolymerization 3D printing: a review of mechanisms and applications
Subedi, S., Liu, S., Wang, W., Shovon, S. M. N., Chen, X., & Ware, H. O. T. (2024) · npj Advanced Manufacturing · doi:10.1038/s44334-024-00005-w · Cited by 129
Processes and materials used for direct writing technologies: A review
Balani, S. B., Ghaffar, S. H., Chougan, M., Pei, E., & Şahin, E. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100257 · Cited by 128
Printable conductive inks used for the fabrication of electronics: an overview
Dimitriou, E., & Michailidis, N. (2021) · Nanotechnology · doi:10.1088/1361-6528/abefff · Cited by 115
Zhang, J., Zeidabadi, M. A., Fargas, G., Peřinka, N., Reguera, J., Lanceros-Méndez, S., Llanes, L., & Jiménez‐Piqué, E. (2022) · Metals · doi:10.3390/met12020234 · Cited by 115
“They contain potential environmental and biological hazards [93].”
BackgroundCopper inks for printed electronics: a review
Zeng, X., He, P., Hu, M., Zhao, W., Chen, H., Liu, L., Sun, J., & Yang, J. (2022) · Nanoscale · doi:10.1039/d2nr03990g · Cited by 115
Additive Manufacturable Materials for Electrochemical Biosensor Electrodes
Elbadawi, M., Ong, J. J., Pollard, T. D., Gaisford, S., & Basit, A. W. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006407 · Cited by 109
Aerosol‐Jet Printed Sensors for Environmental, Safety, and Health Monitoring: A Review
Fisher, C., Skolrood, L. N., Li, K., Joshi, P. C., & Aytuğ, T. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300030 · Cited by 109
2D materials inks toward smart flexible electronics
Moses, O. A., Gao, L., Zhao, H., Wang, Z., Adam, M. L., Sun, Z., Liu, K., Wang, J., Lu, Y. M., Yin, Z., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.08.010 · Cited by 111
A Review of the Metal Additive Manufacturing Processes
Tebianian, M., Aghaie, S., Jafari, N. S. R., Hosseini, S. R. E., Pereira, A. B., Fernandes, F. A. O., Farbakhti, M., Chen, C., & Huo, Y. (2023) · Materials · doi:10.3390/ma16247514 · Cited by 107
“A schematic of this technique is depicted in Figure The deposition process of the inkjet printing may also be performed continuously (as opposed to drop-wise deposition of the material) [8,20].”
MethodYin, Z., Wang, D., Guo, Y., Zhao, Z., Li, L., Chen, W., & Duan, Y. (2023) · InfoMat · doi:10.1002/inf2.12505 · Cited by 110
Nanoscale Patterning of Carbon Nanotubes: Techniques, Applications, and Future
Corletto, A., & Shapter, J. G. (2020) · Advanced Science · doi:10.1002/advs.202001778 · Cited by 104
Sanchez-Dueñas, L., Gómez, E., Larrañaga, M., Blanco, M., Goitandia, A. M., Aranzabe, E., & Vilas‐Vilela, J. L. (2023) · Materials · doi:10.3390/ma16113940 · Cited by 96
“t r ce electronic devices using inkjet printing are a c i i of organic polymers and functional materials, dependi g on the final chara teris ics of the device [10].”
MethodMemristive TiO2: Synthesis, Technologies, and Applications
Illarionov, G. A., Morozova, S. M., Chrishtop, V. V., Einarsrud, M., & Morozov, M. I. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00724 · Cited by 94
Recent advances and prospects of inkjet printing in heterogeneous catalysis
Maleki, H., & Bertola, V. (2020) · Catalysis Science & Technology · doi:10.1039/d0cy00040j · Cited by 96
2D Material‐Based Wearable Energy Harvesting Textiles: A Review
Ali, I., Dulal, M., Karim, N., & Afroj, S. (2023) · Small Structures · doi:10.1002/sstr.202300282 · Cited by 92
Bastola, A. K., He, Y., Im, J., Rivers, G., Wang, F., Worsley, R. E., Austin, J. S., Nelson-Dummett, O., Wildman, R. D., Hague, R., et al. (2023) · Materials Today Electronics · doi:10.1016/j.mtelec.2023.100058 · Cited by 103
Luo, Y., Que, W., Bin, X., Xia, C., Kong, B., Gao, B., & Kong, L. B. (2022) · Small · doi:10.1002/smll.202201290 · Cited by 89
Evolution of low-dimensional material-based field-effect transistors
Ahmad, W., Gong, Y., Abbas, G., Khan, K., Khan, M., Ali, G., Shuja, A., Tareen, A. K., Khan, Q., & Li, D. (2021) · Nanoscale · doi:10.1039/d0nr07548e · Cited by 87
Tang, X., Murali, G., Lee, H., Park, S., Lee, S., Oh, S. M., Lee, J., Ko, T. Y., Koo, C. M., Jeong, Y. J., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010897 · Cited by 86
Reviews on Machine Learning Approaches for Process Optimization in Noncontact Direct Ink Writing
Zhang, H., & Moon, S. K. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c04544 · Cited by 87
Han, F., Li, M., Ye, H., & Zhang, G. (2021) · Nanomaterials · doi:10.3390/nano11051220 · Cited by 88
Jeon, Y., Lee, D.-H., & Yoo, H. (2022) · Coatings · doi:10.3390/coatings12020204 · Cited by 82
“Recently, inkjet printing technology has been used to manufacture transistor arrays and integrated circuits with high electrical performance and high resolution with a low-cost process [54].”
MethodPiezoelectric Drop‐On‐Demand Inkjet Printing of High‐Viscosity Inks
Bernasconi, R., Brovelli, S., Viviani, P., Soldo, M., Giusti, D., & Magagnin, L. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100733 · Cited by 79
Jun, H. Y., Kim, S., & Choi, C. (2021) · Nanomaterials · doi:10.3390/nano11123441 · Cited by 79
Shinde, P. A., Chodankar, N. R., Lee, S., Jung, E., Aftab, S., Han, Y., & Jun, S. C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127029 · Cited by 78
Shahbaz, I., Tahir, M., Li, L., & Song, Y. (2024) · Materials Today · doi:10.1016/j.mattod.2024.06.008 · Cited by 76
Design and development of conductive nanomaterials for electrochemical sensors: a modern approach
Kant, T., Shrivas, K. K., Dewangan, K., Kumar, A., Jaiswal, N. K., Deb, M. K., & Pervez, S. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100769 · Cited by 73
Two-Photon-Assisted Polymerization and Reduction: Emerging Formulations and Applications
Lay, C. L., Koh, C. S. L., Lee, Y. H., Phan‐Quang, G. C., Sim, H. Y. F., Leong, S. X., Han, X., Phang, I. Y., & Ling, X. Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20911 · Cited by 75
3D inkjet-printing of photo-crosslinkable resins for microlens fabrication
Magazine, R., van Bochove, B., Borandeh, S., & Seppälä, J. V. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102534 · Cited by 68
Migliorini, L., Piazzoni, C., Põhako‐Esko, K., Girolamo, M. D., Vitaloni, A., Borghi, F., Santaniello, T., Aabloo, A., & Milani, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102180 · Cited by 68
Printed Strain Sensors for On‐Skin Electronics
Li, Y., Liu, Y., Bhuiyan, S. R. A., Zhu, Y., & Yao, S. (2021) · Small Structures · doi:10.1002/sstr.202100131 · Cited by 65
Fabricating flexible conductive structures by printing techniques and printable conductive materials
Sun, J., Sun, R., Jia, P., Ma, M., & Song, Y. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc01168a · Cited by 68
Mathew, S., & Krishnamoorthi, C. (2025) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01304-2 · Cited by 67
Inkjet-Printed Electronics on Paper for RF Identification (RFID) and Sensing
Kim, S. (2020) · Electronics · doi:10.3390/electronics9101636 · Cited by 67
“Silver nano-particle inks are widely used for inkjet-printed electronics on various substrates, including paper substrates [6-12], because of their inherent capability to achieve a relatively low thermal sintering temperature and higher conductivity compared to other nano-particle-based inks, such as copper (Cu) or go…”
BackgroundFabrication of Silver Mesh/Grid and Its Applications in Electronics
Zhou, H., & Song, Y. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18518 · Cited by 63
Recent Progress in 3D Printed Mold-Based Sensors
He, S., Feng, S., Nag, A., Afsarimanesh, N., Han, T., & Mukhopadhyay, S. C. (2020) · Sensors · doi:10.3390/s20030703 · Cited by 62
The design of an inkjet drive waveform using machine learning
Kim, S., Cho, M., & Jung, S. (2022) · Scientific Reports · doi:10.1038/s41598-022-08784-y · Cited by 63
“Inertia, capillary force, and viscous dissipation are generally used to govern the generation of inkjet drops 15 .”
BackgroundTheory of Anisotropic Metal Nanostructures
Fichthorn, K. A. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00831 · Cited by 60
Approaching the Practical Conductivity Limits of Aerosol Jet Printed Silver
Rosker, E. S., Barako, M. T., Nguyen, E., DiMarzio, D., Kisslinger, K., Duan, D.-W., Sandhu, R., Goorsky, M. S., & Tice, J. B. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06959 · Cited by 55
“8 These suspension-based inks require physical transport of the metal-loaded ink to the substrate surface and require aggressive sintering and/or post-processing to drive off the carrier liquids and bind the packed bed of particles into a continuous agglomerate.”
Zhang, W., Zhou, Y.-H., Ding, Y., Song, L., Yuan, Q., Zhao, W., Xu, C., Wei, J., Li, M., & Ji, H. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.152691 · Cited by 53
Advancements in printed components for proton exchange membrane fuel cells: A comprehensive review
da Costa, G. P., Garcia, D. M. E., Nguyen, T. H. V., Lacharmoise, P. D., & Simao, C. D. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.072 · Cited by 55
Gao, J., He, S., Nag, A., & Wong, J. W. C. (2021) · Sensors · doi:10.3390/s21113602 · Cited by 53
“After the popularization of sensors at the end of the 20th century, various MEMS [1,2] and printed [3,4] sensors have been fabricated and utilized in different applications.”
MethodHerbert, R., Lim, H., Park, S., Kim, J., & Yeo, W. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100158 · Cited by 55
Conformal Metasurfaces: A Novel Solution for Vehicular Communications
Mizmizi, M., Ayoubi, R. A., Tagliaferri, D., Dong, K., Gentili, G. G., & Spagnolini, U. (2022) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2022.3213901 · Cited by 58
“Nanoparticle size is a key aspect in the realization of small details and, current technology demonstrated the realization of very homogeneous particle size distributions with a mean value around 60 nm [58].”
Recent Progress in Electrohydrodynamic Jet Printing for Printed Electronics: From 0D to 3D Materials
Bi, S., Wang, R., Han, X., Wang, Y., Tan, D., Shi, B., Jiang, C., He, Z., & Asare‐Yeboah, K. (2023) · Coatings · doi:10.3390/coatings13071150 · Cited by 54
Chen, Z., Zhang, C., & Zheng, Z. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad5391 · Cited by 57
Khan, M., Refati, M. F. A. D., Arup, M. M. R., Islam, M. A., & Mobarak, M. H. (2025) · Advances in Polymer Technology · doi:10.1155/adv/4234491 · Cited by 59
“Careful regulation of droplet size is required when working with incredibly minute electrical components and devices [227].”
Coppola, B., Maio, L. D., Incarnato, L., & Tulliani, J. (2020) · Nanomaterials · doi:10.3390/nano10040814 · Cited by 56
“Finally, very recently, numerous authors investigated the possibility to prepare conductive elements made with polymer nanocomposites via dry printing [58,59], inkjet printing [60,61] or 3D printing [62–65].”
BackgroundInfinite Approaching Superlubricity by Three-Dimensional Printed Structures
Zhao, Y. F., Mei, H., Chang, P., Chen, C., Cheng, L., & Dassios, K. G. (2020) · ACS Nano · doi:10.1021/acsnano.0c08713 · Cited by 53
Sun, J., Sun, Y., Jia, H., Bi, H., Chen, L., Que, M., Xiong, Y., Han, L., & Sun, L. (2022) · Carbon · doi:10.1016/j.carbon.2022.04.021 · Cited by 52
Flexible organic field-effect transistors-based biosensors: progress and perspectives
Zhang, X., Pu, Z., Su, X. M., Li, C., Zheng, H., & Li, D. (2023) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-023-04553-6 · Cited by 54
Fan, Z., Zhang, Y., Zong, H., & Zhou, G. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.160650 · Cited by 51
Functionalized Gold Nanoparticles with a Cohesion Enhancer for Robust Flexible Electrodes
Im, J., Trindade, G. F., Quach, T. T., Sohaib, A., Wang, F., Austin, J. S., Turyanska, L., Roberts, C. J., Wildman, R. D., Hague, R., et al. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00742 · Cited by 50
Ultrashort laser sintering of metal nanoparticles: A review
Sharif, A., Farid, N., & O’Connor, G. M. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100731 · Cited by 50
Recent progress in non-photolithographic patterning of polymer thin films
Qiu, M., Du, W., Zhou, S., Cai, P., Luo, Y., Wang, X., Yang, R., & Zhao, J. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101688 · Cited by 50
Electrochemical Detection of Glucose Molecules Using Laser-Induced Graphene Sensors: A Review
Gao, J., He, S., & Nag, A. (2021) · Sensors · doi:10.3390/s21082818 · Cited by 53
“The nanomaterials have been used in different forms, including powder [29,30] and particle [31,32] nature.”
BackgroundAn overview of fused filament fabrication technology and the advancement in PLA-biocomposites
Samykano, M., Kumaresan, R., Kananathan, J., Kadirgama, K., & Pandey, A. K. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13394-1 · Cited by 52
“Continuous inkjet (CIJ) printing has a lesser resolution than drop-on-demand (DOD) printing, and the resolution of DOD printing is higher [36, 37].”
Design and synthesis of low temperature printed metal oxide memristors
Carlos, E., Deuermeier, J., Branquinho, R., Gaspar, C., Martins, R., Kiazadeh, A., & Fortunato, E. (2021) · Journal of Materials Chemistry C · doi:10.1039/d0tc05368f · Cited by 48
Sefiane, K., Duursma, G., & Arif, A. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102546 · Cited by 46
“various applications of this phenomenon, such as inkjet printing technologies (5, 63, 64).”
BackgroundLi, N., Khan, S. B., Chen, S., Aiyiti, W., Zhou, J., & Lu, B. (2023) · Polymers · doi:10.3390/polym15204122 · Cited by 49
Tetik, H., Zhao, K., Shah, N., & Lin, D. L. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.05.051 · Cited by 49
Schulz, F., Lokteva, I., Parak, W. J., & Lehmkühler, F. (2021) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202100087 · Cited by 47
Fabrication and modulation of flexible electromagnetic metamaterials
Feng, Y., Liang, M., Zhao, X., & You, R. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-024-00806-1 · Cited by 45
“Common technologies used in this fi eld include nanoimprint lithography (NIL) 26 , 3D printing 27 , inkjet printing technology 28,29 and femtosecond laser direct writing (FLDW) technology 30 .”
Wen, H., Luna-Romera, J. M., Riquelme, J. C., Dwyer, C., & Chang, S. L. Y. (2021) · Nanomaterials · doi:10.3390/nano11102706 · Cited by 45
“Nanoparticles are widely used in applications such as bio-medicine [1–4], sensors [5,6], nanoscale thermal metrology [7], energy [8], environmental protection [9], optics [10–13] and electronics [14,15].”
MethodWearable Printed Temperature Sensors: Short Review on Latest Advances for Biomedical Applications
Khan, S., Ali, S., Khan, A., & Bermak, A. (2021) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2021.3121480 · Cited by 44
Planar Microwave Sensors: State of the Art and Applications
Juan, C. G., Grenier, K. M., Zarifi, M. H., Ebrahimi, A., & Martín, F. (2025) · IEEE Access · doi:10.1109/access.2025.3599112 · Cited by 47
Recent progress in printing flexible electronics: A review
Bi, S., Gao, B., Han, X., He, Z., Metts, J., Jiang, C., & Asare‐Yeboah, K. (2023) · Science China Technological Sciences · doi:10.1007/s11431-021-2093-4 · Cited by 42
“These characteristics are affected by several parameters of the ink (such as viscosity, surface tension, and density), the substrate and the environment [96].”
On‐Demand Picoliter‐Level‐Droplet Inkjet Printing for Micro Fabrication and Functional Applications
You, K., Wang, Z., Lin, J., Guo, X., Lin, L., Liu, Y., Li, F., & Huang, W. (2024) · Small · doi:10.1002/smll.202402638 · Cited by 42
Qin, C., Sun, Q., Chen, Y., Fahad, S., Wu, J., Dong, Y., Yu, H., & Wang, M. (2024) · npj Flexible Electronics · doi:10.1038/s41528-024-00314-2 · Cited by 45
Metadata
- Authors
- Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A.
- Affiliations
- Central Institute of Plastics Engineering and Technology (IN)
- Corresponding author
- Nayak, Laxmidhar
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 29
- Pages
- 8771-8795
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2952165706
- Semantic Scholar
- abb1ce77deddc05d0ca46a91ce5503ddbd17a48b
- Cited by
- 497
- References
- 176
- Citations by year
- 2026: 46 · 2025: 67 · 2024: 77 · 2023: 75 · 2022: 90 · 2021: 88 · 2020: 51 · 2019: 3
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Keywords
- inkjet printing, nanoparticle ink, flexible electronics, device fabrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.