A review on inkjet printing of nanoparticle inks for flexible electronics
The DOI matches its Crossref record; 173 of the 176 references it cites were found in a registry or an index.
Abstract
The recent progress, challenges and promising future of design and synthesis of inks and device fabrication by inkjet printing are reviewed and discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To eliminate these issues, some potential mass-processing technologies are emerging, such as laser-based processing,[249,617] roll-to-roll printing,[618,619] inkjet printing,[620] and other technologies for flexible electronics that offer excellent and consistent performance while ensuring fast, low-cost manufacturing.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [617]
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Research works printed but not linked: 11
- Chopra, 2014, Int. J. Comput. Sci. Inf. Technol., 6, 61
- Zhang, 2018, Adv. Condens. Matter Phys., 2018, 9795654
- Falkovsky, 2008, J. Phys.: Conf. Ser., 129, 012004
- Martin, 2008, J. Phys.: Conf. Ser., 105, 012001
- Reis, 2000, MRS Online Proc. Libr., 625
- Kang, 2010, J. Mater. Sci.: Mater. Electron., 21, 1213
- Dang, 2014, Adv. Nat. Sci.: Nanosci. Nanotechnol., 6, 015003
- Dang, 2012, Adv. Nat. Sci.: Nanosci. Nanotechnol., 3, 035004
- Rahimi, 2015, J. Phys.: Conf. Ser., 660, 012044
- Nguyen, 2011, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2, 035015
- Ji, 2018, J. Mater. Sci.: Mater. Electron., 29, 13032
Cited by
Items 201–300 of 519
Kakherskyi, S., Pshenychnyi, R., Dobrozhan, O., Vaziev, J. G., Bukivskii, А. P., Bukivskij, P. M., Gnatenko, Y. P., & Opanasyuk, A. (2021) · Applied Physics A · doi:10.1007/s00339-021-04847-5 · Cited by 17
Dendrimer stabilized nanoalloys for inkjet printing of surface-enhanced Raman scattering substrates
Fernandes, T. P., Martins, N. C. T., Fateixa, S., Nogueira, H. I. S., Daniel‐da‐Silva, A. L., & Trindade, T. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.12.167 · Cited by 17
Ismail, Z. (2022) · Carbon letters · doi:10.1007/s42823-022-00365-3 · Cited by 17
Inkjet Printing of Perovskite Ceramics for High-Performance Proton Ceramic Fuel Cells
Chang, W., Kang, E. H., Jeong, H. J., Choi, W., & Shim, J. H. (2022) · Energy · doi:10.1016/j.energy.2022.126489 · Cited by 17
Gold Inks for Inkjet Printing on Photo Paper: Complementary Characterisation
Tiyyagura, H. R., Majerič, P., Bračič, M., Anžel, I., & Rudolf, R. (2021) · Nanomaterials · doi:10.3390/nano11030599 · Cited by 17
“For inkjet printing, conductive inks are used, composed mostly on the basis of metallic nanoparticles like silver, copper, and gold [21,22].”
BackgroundEffectiveness of Oxygen during Sintering of Silver Thin Films Derived by Nanoparticle Ink
Feng, F., Hong, H., Gao, X. Q., Ren, T., Ma, Y., & Feng, P. (2022) · Nanomaterials · doi:10.3390/nano12111908 · Cited by 16
“The direct printing of conductive ink has emerged as an important alternative to traditional lithography, which is a complex multistep method for producing conductive thin films or patterns that generates a lot of waste [1].”
BackgroundBirchall, L., Foerster, A., Rance, G. A., Terry, A., Wildman, R. D., & Tuck, C. J. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113977 · Cited by 16
Inkjet printing on hydrophobic surfaces: Controlled pattern formation using sequential drying
Naderi, P., Sheuten, B. R., Amirfazli, A., & Grau, G. (2023) · The Journal of Chemical Physics · doi:10.1063/5.0149663 · Cited by 16
Solution processing for colloidal nanoparticle thin film: From fundamentals to applications
Jeong, W., Lee, H., Hwang, Y. J., An, B., Lee, Y., Jeong, H., Kim, G., Park, Y., Kim, M.-Y., & Ha, D. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103538 · Cited by 16
Recent advances in printed devices for next-generation sensing
Bappy, M. O., Song, K., & Zhang, Y. (2025) · APL Electronic Devices · doi:10.1063/5.0264012 · Cited by 17
3D Assembly of Graphene Nanomaterials for Advanced Electronics
Ferrand, H. L., Chabi, S., & Agarwala, S. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900151 · Cited by 16
Fully Printed Inverters using Metal‐Oxide Semiconductor and Graphene Passives on Flexible Substrates
Singaraju, S. A., Marques, G. C., Gruber, P. A., Kruk, R., Hahn, H., Breitung, B., & Aghassi‐Hagmann, J. (2020) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202000252 · Cited by 16
Laser fabrication of fully printed graphene oxide microsensor
Wang, X., Zhang, J., Mei, X., Xu, B., & Miao, J. (2020) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2020.106520 · Cited by 16
Duan, Y., Li, H., Yang, W., Shao, Z., Wang, Q., Huang, Y., & Yin, Z. (2022) · Nanoscale · doi:10.1039/d2nr03049g · Cited by 16
Inanlu, M. J., Farhadi, J., Ansari, E., Charkas, S., & Bazargan, V. (2022) · RSC Advances · doi:10.1039/d2ra03833a · Cited by 16
Closed-loop direct ink extruder system with multi-part materials mixing
Ntagios, M., Nassar, H., & Dahiya, R. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103437 · Cited by 16
Emerging strategies for inkjet-printed perovskite quantum dots in high-performance LED displays
Ngo, L. T., Lin, Y.-H., & Liu, R. (2025) · Materials Horizons · doi:10.1039/d5mh00395d · Cited by 18
High Speed In-situ X-ray Imaging of 3D Freeze Printing of Aerogels
Tetik, H., Yang, G., Tan, W., Fong, A. Y., Lei, S., Weker, J. N., & Lin, D. L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101513 · Cited by 18
Ohmic contact formation for inkjet-printed nanoparticle copper inks on highly doped GaAs
Hayati-Roodbari, N., Wheeldon, A., Hendler, C., Fian, A., & Trattnig, R. (2021) · Nanotechnology · doi:10.1088/1361-6528/abe902 · Cited by 15
Ahmadi, Z., Lee, S.-J., Unocic, R. R., Shamsaei, N., & Mahjouri‐Samani, M. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001260 · Cited by 15
Inkjet printing of multi-stripes based deflection monitoring sensor on flexible substrate
Khan, S., Ali, S., Khan, A., Ahmed, M., Wang, B., & Bermak, A. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.112638 · Cited by 15
Lall, P., Kulkarni, S., & Miller, S. (2023) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm55368.2023.10177665 · Cited by 14
“Keywords— inkjet, printed electronics, flexible hybrid electronics, process study, water-based silver ink, conductive ink, nanoparticle silver ink Nomenclature: CAD Computer-Aided Design SMD Surface Mount Devices AJP Aerosol Jet Printing cP Centipoise, Unit of Viscosity pL Picolitre, Unit of liquid volume DPI Drops pe…”
BackgroundAhmadi, Z., Patel, A., Taba, A., Jaiswal, S., Lee, S.-J., Shamsaei, N., & Mahjouri‐Samani, M. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c01814 · Cited by 14
Fluid drawing printing 3D conductive structures for flexible circuit manufacturing
Li, Y., Wang, D., Feng, Y., Chen, X., Chen, X., Liu, C. X., Li, Y., Suo, L., Zhang, R., Zhang, X., et al. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-025-00936-0 · Cited by 14
“In addition, it has a wide range of applications for fabricating electronic devices on rigid and fl exible substrates 4,5 .”
Sels, A., & Subramanian, V. (2023) · ACS Omega · doi:10.1021/acsomega.2c04687 · Cited by 14
Tran, V., Wei, Y., & Du, H. (2020) · Micromachines · doi:10.3390/mi11050490 · Cited by 14
“Exploration of inkjet printing for the fabrication of electronic devices has recently become a trendy research topic due to the remarkable advantages of the digital-additive fabrication such as saving material and time, high resolution, and compatibility with different materials [1,2].”
BackgroundInkjet Printing of a Benzocyclobutene-Based Polymer as a Low-k Material for Electronic Applications
Iervolino, F., Suriano, R., Scolari, M., Gelmi, I., Castoldi, L., & Levi, M. (2021) · ACS Omega · doi:10.1021/acsomega.1c01488 · Cited by 14
Liu, J. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc01989b · Cited by 14
Printing technologies for monitoring crop health
Panáček, D., Kupka, V., Nalepa, M., Dědek, I., Álvarez-Diduk, R., Olenik, S., Flauzino, J. M. R., Zdražil, J., Jakubec, P., Zdražil, L., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-68778-6 · Cited by 16
Epidermal Bioelectronics for Management of Chronic Diseases: Materials, Devices and Systems
Qiao, Z., Chen, S., Fan, S., Xiong, Z., & Lim, C. T. (2023) · Advanced Sensor Research · doi:10.1002/adsr.202200068 · Cited by 13
Conducting polymer PEDOTs for biomedical application
Zhou, M., Zhu, L., An, S., & Chen, S. (2024) · Synthetic Metals · doi:10.1016/j.synthmet.2024.117700 · Cited by 13
Seera, R., & Row, T. N. G. (2020) · Crystal Growth & Design · doi:10.1021/acs.cgd.0c00469 · Cited by 13
Drop impact on solids: contact-angle hysteresis filters impact energy into modal vibrations
Kern, V. R., Bostwick, J. B., & Steen, P. H. (2021) · Journal of Fluid Mechanics · doi:10.1017/jfm.2021.547 · Cited by 13
Inkjet assisted fabrication of planar biocompatible memristors
Illarionov, G. A., Kolchanov, D. S., Kuchur, O. A., Zhukov, M. V., Sergeeva, E., Krishtop, V. V., Vinogradov, A. V., & Morozov, M. I. (2019) · RSC Advances · doi:10.1039/c9ra08114c · Cited by 13
Fabrication of Extremely Concentrated Silver Hydrosols without Additional Stabilizers
Vorobyev, S., Likhatski, M., Romanchenko, A. S., Fetisova, O. Y., Kazachenko, А. S., Volochaev, M. N., & Mikhlin, Y. L. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06006 · Cited by 13
Photon‐Pen Writing for Metal Oxide‐Based Versatile Nanosensors
Bae, G., Kim, M., Jang, M., Kwon, Y. M., Yim, S., Song, W., Myung, S., Lee, S. S., Hasan, T., & An, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204821 · Cited by 12
Lin, F., Yang, P., Wang, Q., Zhang, Y., Wang, W., Liu, S., Zhao, W., & Zhao, Q. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300972 · Cited by 13
Jaapar, F. N., Parmin, N. A., Halim, N. H. A., Hashim, U., Gopinath, S. C. B., Halim, F. S., Uda, M. N. A., Afzan, A., Nor, N. M., & Razak, K. A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126745 · Cited by 12
Dobrozhan, O., Шелест, И. В., Stepanenko, A. O., Курбатов, Д. І., Yermakov, M., Čerškus, A., Плотніков, С. В., & Opanasyuk, A. (2019) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2019.104879 · Cited by 12
RetractedHighly Stretchable and Sensitive Strain Sensor based on Ionogel/Ag Synergistic Conductive Network
Sun, J., Yuan, Y., Lu, G., Xue, T., Nie, J., & Lu, Y. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202102245 · Cited by 12
Sirinara, P., Patarapongsant, Y., Nilyai, S., Sooklert, K., Dissayabutra, T., Rojanathanes, R., & Sereemaspun, A. (2023) · BMC Public Health · doi:10.1186/s12889-022-14807-0 · Cited by 11
“Increasing studies have represented that metal particles are emitted from printers [25, 26].”
BackgroundSun, Q., Ma, C., Li, W., Li, X., Sakamoto, K., Liu, X., Okamoto, A., & Minari, T. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c00019 · Cited by 11
Multiscale Transfer Printing via Shape Memory Polymer with High Adhesion and Modulus Switchability
Fan, F., Chen, L., Zhou, Y., & Duan, H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c05828 · Cited by 11
A Comprehensive Guide to Fully Inkjet‐Printed IGZO Transistors
Magnarin, L. A., Breitung, B., & Aghassi‐Hagmann, J. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202400478 · Cited by 11
Nyabadza, A., Ryan, S., Chatterjee, S., Henry, D. D., Muthusamy, S. P., Santos, J., Hashemi, T. S., Nicolosi, V., Brabazon, D., & Vázquez, M. (2025) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2025.100799 · Cited by 11
Recent Progresses in Direct Photolithographic Patterning of Quantum Dots
Liu, Y., Li, J., Cai, S., Wu, T., Chen, Z., Lin, Y., & Wang, S. (2025) · ACS Photonics · doi:10.1021/acsphotonics.5c01692 · Cited by 11
Chemistry, Properties, and Patterning of Transparent and Conductive Materials
Matos, K. L., Russo, A. J., & Braunschweig, A. B. (2025) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5c05925 · Cited by 11
“166 In inkjet printing, the ability to tune viscosity and surface tension through solvent choice is critical for achieving consistent droplet formation and resolution 167 and in this study they were able to highlight the ability to tailor these properties using Au NP inks.”
Developing pressure sensors from impregnated textile sandwiched in inkjet-printed electrodes
Khan, S., Ali, S., Khan, A., & Bermak, A. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-07325-z · Cited by 11
“The piezoelectric actuation-based inkjet printing is more popular as it can be used to process a wide variety of organic and inorganic materials [5, 10, 15].”
BackgroundA precise method of color space conversion in the digital printing process based on PSO-DBN
Su, Z., Yang, J., Li, P., Jing, J., & Zhang, H. (2022) · Textile Research Journal · doi:10.1177/00405175211067287 · Cited by 11
InkFiltration: Using Inkjet Printers for Acoustic Data Exfiltration from Air-Gapped Networks
Briseno, J. D. G., Singh, A. D., & Srivastava, M. B. (2022) · ACM Transactions on Privacy and Security · doi:10.1145/3510583 · Cited by 11
“In contrast, inkjet printing is not only still relevant for paper printing but also has become more important in the field of electronics manufacturing [26].”
BackgroundBiocompatible organic electrochemical transistor on polymeric scaffold for wound healing monitoring
Cavallo, A., Losi, P., Buscemi, M., Kayal, T. A., Beccatelli, M., Soldani, G., & Coppedé, N. (2022) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ac84ec · Cited by 11
Chen, S., Wang, W., Zhang, Z., Li, Z., Fan, K., Zhang, Z., Liu, L., & Chen, S. (2023) · Organic Electronics · doi:10.1016/j.orgel.2023.106880 · Cited by 11
Webb, M. T., Condes, L. C., Ly, H. G., Galizia, M., & Razavi, S. (2023) · Journal of Membrane Science · doi:10.1016/j.memsci.2023.121910 · Cited by 11
Inkjet printing P(VDF-TrFE-CTFE) actuators for large bending strains
Sekar, S. A., & Hunt, A. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad1df0 · Cited by 11
“While IJP of functional materials poses many challenges [11], advances in printing conductive tracks on flexible substrates [12] has also enabled printing wire-based electromagnetic [13] and electrothermal [14] actuators.”
BackgroundChuquitarqui, A., Coteț, L. C., Baia, M., György, E., Magyari, K., Barbu–Tudoran, L., Baia, L., Díaz‐González, M., Fernández‐Sánchez, C., & del Pino, Á. P. (2020) · Nanotechnology · doi:10.1088/1361-6528/ab8d67 · Cited by 11
Guan, Y., Xu, F., Wang, X., Hui, Y., Sha, J., Tian, Y., Wang, Z., Zhang, S., Chen, D., & Yang, L. (2020) · Microelectronic Engineering · doi:10.1016/j.mee.2020.111455 · Cited by 11
Fujita, H., Yamagishi, K., Zhou, W., Tahara, Y., Huang, S. Y., Hashimoto, M., & Fujie, T. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc00667c · Cited by 11
Nyabadza, A., Chatterjee, S., Ryan, S., Santos, J., Nicolosi, V., Brabazon, D., & Vázquez, M. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.106338 · Cited by 11
Chen, Z., Xie, Q., Ding, J., Yang, Z., Zhang, W., & Cheng, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04494 · Cited by 10
Sreenilayam, S. P., McCann, R., McCarthy, É., Freeland, B. H., Fleischer, K., Goodnick, S. M., Bowden, S., Honsberg, C. B., & Brabazon, D. (2021) · ESAFORM 2021 · doi:10.25518/esaform21.2239 · Cited by 12
Efimov, A. A., Kornyushin, D. V., Buchnev, A. I., Kameneva, E. I., Lizunova, A. A., Arsenov, P. V., Varfolomeev, A. E., Pavzderin, N. B., Nikonov, A. V., & Ivanov, V. V. (2021) · Applied Sciences · doi:10.3390/app11135791 · Cited by 10
“Among them are the following: inkjet [7], aerosol jet [8], screen [9], microplotter [10] and electrohydrodynamic [11] printing, focusing of aerosol nanoparticles using aerodynamic lenses [12], electrostatic masks [13], micro-nozzles [14], and others.”
BackgroundInfluentialKim, Y., & Kim, W.-B. (2023) · Coatings · doi:10.3390/coatings13020232 · Cited by 10
Low-Temperature Self-Stacking Ink for Electrohydrodynamic Direct Writing
Du, X., Zhong, Y., Kang, G., Jiang, J., Wang, X., Li, W., & Zheng, G. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c00723 · Cited by 10
Shariq, M., Rudolf, R., Majerič, P., Chattopadhyaya, S., Kargl, R., Friedrich, B. G., Grace, A. N., & Dixit, A. R. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.132837 · Cited by 10
Nanofluid Drop Impact on Heated Surfaces
Ma, X., Aldhaleai, A., Liu, L., & Tsai, P. A. (2024) · Langmuir · doi:10.1021/acs.langmuir.3c03343 · Cited by 10
Zhang, Y., Gu, B., Tang, W., Xue, Z., Shen, S., & Li, H. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.104356 · Cited by 10
A green approach to water‐based graphene ink with reverse coffee ring effect
Nayak, L., Mohanty, S., & Ramadoss, A. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-05456-x · Cited by 10
Self-citationNickel-Based Inks for Flexible Electronics — A Review on Recent Trends
Murthy, H., Thakur, N., & Shankhwar, N. (2021) · Journal of Advanced Manufacturing Systems · doi:10.1142/s0219686722500214 · Cited by 10
Printable devices for neurotechnology
Matta, R., Moreau, D., & O'Connor, R. P. (2024) · Frontiers in Neuroscience · doi:10.3389/fnins.2024.1332827 · Cited by 9
“In inkjet printing, particles with larger size are not suitable for ink formation as they clog the nozzles (Nayak et al., 2019).”
BackgroundJiang, H., Yang, R., Zhu, Z., Sun, C. M., Jin, Y., Zheng, L., Shen, L., Tian, C., Xie, L., Yang, J., et al. (2025) · Advanced Science · doi:10.1002/advs.202416634 · Cited by 9
Behera, D., Liao, D., & Cullinan, M. A. (2020) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4049668 · Cited by 9
Petani, L., Wehrheim, V., Koker, L., Reischl, M., Ungerer, M., Gengenbach, U. K., & Pylatiuk, C. (2021) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ac32ab · Cited by 11
Inkjet printing of epitaxially connected nanocrystal superlattices
Balazs, D. M., Erkan, N. D., Quien, M., & Hanrath, T. (2021) · Nano Research · doi:10.1007/s12274-021-4022-7 · Cited by 9
Li, Y., & Xu, D. (2023) · Materials Technology · doi:10.1080/10667857.2023.2262131 · Cited by 9
Kuleshov, B. S., Zavyalova, E. G., Poimanova, O. Y., Abramov, A. A., Ponomarenko, S. A., & Agina, E. V. (2024) · Russian Chemical Reviews · doi:10.59761/rcr5116 · Cited by 9
Saleem, M. A., Xiao, X., Mamoon, S., Li, G., & Liu, T. (2024) · Precision Engineering · doi:10.1016/j.precisioneng.2024.11.012 · Cited by 9
Kim, H., Hashimoto, M., Ohkura, Y., Ito, T., Takahashi, H., Sato, H., Kim, J., Shibayama, N., Miyasaka, T., & Kim, G. M. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159571 · Cited by 9
Wearable Sweat Biosensors on Sports Analysis
Feng, S., & Bian, S. (2022) · Materials Lab · doi:10.54227/mlab.20220028 · Cited by 9
Micheel, M., Baruah, R., Kumar, K., & Wächtler, M. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202201039 · Cited by 9
Importance of the Heat Treatment Scheme on Self-Reducing Reactive Silver Inks
DiGregorio, S. J., Raikar, S., & Hildreth, O. J. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c01082 · Cited by 9
Overview on lightweight, multifunctional materials
Costa, C. M., Costa, P. F. R., & Lanceros-Méndez, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818501-8.00002-0 · Cited by 11
Heidarinassab, S., Nyabadza, A., Ahad, I. U., & Brabazon, D. (2024) · Materials · doi:10.3390/ma17184527 · Cited by 9
Straubinger, D., Koltay, P., Zengerle, R., Kartmann, S., & Shu, Z. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202419653 · Cited by 8
Jeong, S. W., Park, J. H., Kiguye, C., Jeong, J., Park, J. Y., Kim, D. Y., Jeong, B. G., Whang, D. R., & Kim, J. Y. (2025) · Advanced Optical Materials · doi:10.1002/adom.202500413 · Cited by 8
Viviani, P., Caporaso, M. T., Scolari, M., Gelmi, I., Castoldi, L., & Magagnin, L. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.04.079 · Cited by 8
Flexible Copper Metal Circuits via Desktop Laser Printed Masks
Ghosh, R., Liu, X., & Yates, M. Z. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200400 · Cited by 8
The mechanism study of laser peeling of ultra-thin polyimide film from the transparent substrate
Hong, J., Cheng, P., Guo, J., Chen, W., Li, Y., Liu, J., Zhu, Q., & Chen, J. (2022) · Surfaces and Interfaces · doi:10.1016/j.surfin.2022.102561 · Cited by 8
Choi, H., Park, W., & Wong, W. S. (2023) · Organic Electronics · doi:10.1016/j.orgel.2023.106980 · Cited by 8
Direct-write printed controllable concave surface for fabricating flexible metal electrode
Wang, K., Kang, H., Wang, S., Li, C., & Sun, J. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.104573 · Cited by 8
Nonlinear Waveform Optimization for Enhanced Ink Droplet Formation in Material Jetting
Shen, Q., Zhang, L., Ji, R., Saetang, V., & Qi, H. (2025) · Micromachines · doi:10.3390/mi16040445 · Cited by 7
Off the Grid: A new strategy for material-jet 3D printing with enhanced sub-droplet resolution
Nelson-Dummett, O., Rivers, G., Gilani, N., Simonelli, M., Tuck, C. J., Wildman, R. D., Hague, R., & Turyanska, L. (2023) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2023.100185 · Cited by 7
“Inkjet and other drop-on-demand printing is increasingly being adopted for additive manufacturing (AM) of functional materials, including polymers, metals, ceramics, and low-dimensional materials [1 – 4].”
Krivačić, S., Speck, A., Kassal, P., & Bakker, E. (2024) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2024.136759 · Cited by 7
Chang, W., Oh, K. H., Kang, S. M., Hwang, J. S., Min, K. C., & Shim, J. H. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104606 · Cited by 7
Abbas, S. M., & Abas, K. M. (2025) · BMC Chemistry · doi:10.1186/s13065-025-01584-1 · Cited by 7
“Metal nanoparticle dispersion can be supported by various carbon-based fillers, such as graphene oxide (GO), reduced graphene oxide (rGO), exfoliated graphene layers (EG), graphene flake (GF), and carbon nano-tubes (CNTs) [39, 40].”
Sapuan, S. M., Nurazzi, N. M., Shazleen, S. S., Norrrahim, M. N. F., Ng, L. Y. F., Sabaruddin, F. A., & Padzil, F. N. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-19053-7.00015-9 · Cited by 7
Metal nanoparticles for sensing applications
Rafatmah, E., & Hemmateenejad, B. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-88431-0.00019-3 · Cited by 8
Zhang, L., Gan, G., Fan, P., Liu, Y., Wang, T., Li, W., & Du, J. (2023) · Journal of Coatings Technology and Research · doi:10.1007/s11998-023-00781-8 · Cited by 7
Four‐Dimensional (4D) Microprinting
Korrayi, R. R., Jena, A., Marupalli, B. C. G., Samal, B. B., Varshney, S. K., & Kumar, C. S. (2024) · Wiley eBooks · doi:10.1002/9781394198085.ch14 · Cited by 7
Acosta, C. A., Flynn, W. P., Garnsey, S., Dipon, W., Guo, R., & Bhalla, A. S. (2024) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2024.115483 · Cited by 7
Inkjet-printed low temperature co-fired ceramics: process development for customized LTCC
Jäger, J., Ihle, M., Gläser, K., & Zimmermann, A. (2024) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ad59b3 · Cited by 7
Metadata
- Authors
- Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A.
- Affiliations
- Central Institute of Plastics Engineering and Technology (IN)
- Corresponding author
- Nayak, Laxmidhar
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 29
- Pages
- 8771-8795
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2952165706
- Semantic Scholar
- abb1ce77deddc05d0ca46a91ce5503ddbd17a48b
- Cited by
- 497
- References
- 176
- Citations by year
- 2026: 46 · 2025: 67 · 2024: 77 · 2023: 75 · 2022: 90 · 2021: 88 · 2020: 51 · 2019: 3
- FWCI
- 20.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Keywords
- inkjet printing, nanoparticle ink, flexible electronics, device fabrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.