The DOI matches its Crossref record; 166 of the 166 references it cites were found in a registry or an index.
Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells
Abstract
This review explores perovskite crystallization in scalable deposition techniques, including blade, slot-die, spray coating, and inkjet printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Self-citationIncorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citationHigh-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Efficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citationGrowth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Deng, Y., Zheng, X., Bai, Y., Wang, Q., Zhao, J., & Huang, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0153-9 · Cited by 791
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Bu, T., Li, J., Li, H., Tian, C., Su, J., Tong, G., Ono, L. K., Wang, C., Lin, Z., Chai, N., et al. (2021) · Science · doi:10.1126/science.abh1035 · Cited by 731
Making and Breaking of Lead Halide Perovskites
Manser, J. S., Saidaminov, M. I., Christians, J. A., Bakr, O. M., & Kamat, P. V. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00455 · Cited by 727
Deng, Y., Peng, E., Shao, Y., Xiao, Z., Dong, Q., & Huang, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03907f · Cited by 719
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Song, Z., McElvany, C. L., Phillips, A. B., Celik, I., Krantz, P. W., Watthage, S. C., Liyanage, G. K., Apul, D., & Heben, M. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00757d · Cited by 613
Deng, Y., Van Brackle, C. H., Dai, X., Zhao, J., Chen, B., & Huang, J. (2019) · Science Advances · doi:10.1126/sciadv.aax7537 · Cited by 535
Wu, W.-Q., Yang, Z., Rudd, P. N., Shao, Y., Dai, X., Wei, H., Zhao, J., Fang, Y., Wang, Q., Liu, Y., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav8925 · Cited by 522
Cost‐Performance Analysis of Perovskite Solar Modules
Cai, M., Wu, Y., Chen, H., Yang, X., Qiang, Y., & Han, L. (2016) · Advanced Science · doi:10.1002/advs.201600269 · Cited by 513
The role of the third component in ternary organic solar cells
Gasparini, N., Salleo, A., McCulloch, I., & Baran, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0093-4 · Cited by 494
Su, Y.-W., Lan, S.-C., & Wei, K.-H. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70013-0 · Cited by 454
Chen, B., Yu, Z. J., Manzoor, S., Wang, S., Weigand, W., Yu, Z., Yang, G., Ni, Z., Dai, X., Holman, Z. C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.01.008 · Cited by 449
Gharibzadeh, S., Abdollahi Nejand, B., Jakoby, M., Abzieher, T., Hauschild, D., Moghadamzadeh, S., Schwenzer, J. A., Brenner, P., Schmager, R., Haghighirad, A. A., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803699 · Cited by 435
Wu, W.-Q., Wang, Q., Fang, Y., Shao, Y., Tang, S., Deng, Y., Lu, H., Liu, Y., Li, T., Yang, Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04028-8 · Cited by 430
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Ludin, N. A., Mustafa, N. I., Hanafiah, M. M., Ibrahim, M. A., Asri Mat Teridi, M., Sepeai, S., Zaharim, A., & Sopian, K. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.048 · Cited by 421
Noel, N. K., Habisreutinger, S. N., Wenger, B., Klug, M. T., Hörantner, M. T., Johnston, M. B., Nicholas, R. J., Moore, D. T., & Snaith, H. J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02373h · Cited by 413
Ye, J., Byranvand, M. M., Martínez, C. O., Hoye, R. L. Z., Saliba, M., & Polavarapu, L. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102360 · Cited by 389
Self-citationLi, T., Pan, Y., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01798g · Cited by 370
From scalable solution fabrication of perovskite films towards commercialization of solar cells
Huang, F., Li, M., Siffalovic, P., Cao, G., & Tian, J. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03025a · Cited by 351
Yang, Z., Chueh, C., Zuo, F., Kim, J. H., Liang, P., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500328 · Cited by 348
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Reducing Surface Halide Deficiency for Efficient and Stable Iodide-Based Perovskite Solar Cells
Wu, W.-Q., Rudd, P. N., Ni, Z., Van Brackle, C. H., Wei, H., Wang, Q., Ecker, B. R., Gao, Y., & Huang, J. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b13418 · Cited by 341
Guo, F., Azimi, H., Hou, Y., Przybilla, T., Hu, M., Bronnbauer, C., Langner, S., Spiecker, E., Forberich, K., & Brabec, C. J. (2015) · Nanoscale · doi:10.1039/c4nr06033d · Cited by 337
One-step roll-to-roll air processed high efficiency perovskite solar cells
Zuo, C., Vak, D., Angmo, D., Ding, L., & Gao, M. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.037 · Cited by 335
Stable Large‐Area (10 × 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Hu, Y., Si, S., Mei, A., Rong, Y., Liu, H., Li, X., & Han, H. (2017) · Solar RRL · doi:10.1002/solr.201600019 · Cited by 328
Yang, Z., Zhang, W., Wu, S., Zhu, H., Liu, Z., Liu, Z., Jiang, Z., Chen, R., Zhou, J., Lu, Q., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg3749 · Cited by 324
Das, S., Yang, B., Gu, G., Joshi, P. C., Ivanov, I. N., Rouleau, C. M., Aytug, T., Geohegan, D. B., & Xiao, K. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00119 · Cited by 312
Deng, Y., Dong, Q., Bi, C., Yuan, Y., & Huang, J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600372 · Cited by 312
Roll-to-Roll Printing of Perovskite Solar Cells
Dou, B., Whitaker, J. B., Bruening, K., Moore, D. T., Wheeler, L. M., Ryter, J., Breslin, N. J., Berry, J. J., Garner, S. M., Barnes, F. S., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01556 · Cited by 304
Heo, J. H., Lee, M. H., Jang, M. H., & Im, S. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06718b · Cited by 281
Composition Engineering in Doctor‐Blading of Perovskite Solar Cells
Tang, S., Deng, Y., Zheng, X., Bai, Y., Fang, Y., Dong, Q., Wei, H., & Huang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700302 · Cited by 280
Scalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates
Dai, X., Deng, Y., Van Brackle, C. H., Chen, S., Rudd, P. N., Xiao, X., Lin, Y., Chen, B., & Huang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903108 · Cited by 279
Kim, G., Choi, H., Kim, M., Lee, J., Son, S. Y., & Park, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903403 · Cited by 278
Heterogeneity at multiple length scales in halide perovskite semiconductors
Tennyson, E. M., Doherty, T. A. S., & Stranks, S. D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0125-0 · Cited by 274
The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Life Cycle Assessment (LCA) of perovskite PV cells projected from lab to fab
Celik, I., Song, Z., Cimaroli, A. J., Yan, Y., Heben, M. J., & Apul, D. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.04.037 · Cited by 260
Phase Transition Control for High-Performance Blade-Coated Perovskite Solar Cells
Li, J., Munir, R., Fan, Y., Niu, T., Liu, Y., Zhong, Y., Yang, Z., Tian, Y., Liu, B., Sun, J., et al. (2018) · Joule · doi:10.1016/j.joule.2018.04.011 · Cited by 260
Hu, Q., Zhao, L., Wu, J., Gao, K., Luo, D., Jiang, Y., Zhang, Z., Zhu, C., Schaible, E., Hexemer, A., et al. (2017) · Nature Communications · doi:10.1038/ncomms15688 · Cited by 259
Roll‐to‐Roll Slot Die Coated Perovskite for Efficient Flexible Solar Cells
Galagan, Y., Di Giacomo, F., Gorter, H., Kirchner, G., de Vries, I., Andriessen, R., & Groen, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801935 · Cited by 259
CsPbIBr2 Perovskite Solar Cell by Spray-Assisted Deposition
Lau, C. F. J., Deng, X., Ma, Q., Zheng, J., Yun, J. S., Green, M. A., Huang, S., & Ho-Baillie, A. W. Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00341 · Cited by 255
Lee, J., Malekshahi Byranvand, M., Kang, G., Son, S. Y., Song, S., Kim, G.-W., & Park, T. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04949 · Cited by 251
Di Giacomo, F., Shanmugam, S., Fledderus, H., Bruijnaers, B. J., Verhees, W. J. H., Dorenkamper, M. S., Veenstra, S. C., Qiu, W., Gehlhaar, R., Merckx, T., et al. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.11.010 · Cited by 249
Gu, X., Zhou, Y., Gu, K., Kurosawa, T., Guo, Y., Li, Y., Lin, H., Schroeder, B. C., Yan, H., Molina‐Lopez, F., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602742 · Cited by 248
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
Inkjet printing of CH3NH3PbI3on a mesoscopic TiO2film for highly efficient perovskite solar cells
Li, S.-G., Jiang, K.-J., Su, M.-J., Cui, X.-P., Huang, J.-H., Zhang, Q.-Q., Zhou, X.-Q., Yang, L.-M., & Song, Y.-L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05675b · Cited by 242
Saliba, M., Tan, K. W., Sai, H., Moore, D. T., Scott, T., Zhang, W., Estroff, L. A., Wiesner, U., & Snaith, H. J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500717w · Cited by 241
Self-citationHuang, H., Shi, J., Zhu, L., Li, D., Luo, Y., & Meng, Q. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.026 · Cited by 237
Coated and Printed Perovskites for Photovoltaic Applications
Howard, I. A., Abzieher, T., Hossain, I. M., Eggers, H., Schackmar, F., Ternes, S., Richards, B. S., Lemmer, U., & Paetzold, U. W. (2019) · Advanced Materials · doi:10.1002/adma.201806702 · Cited by 235
Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects
Peng, X., Yuan, J., Shen, S., Gao, M., Chesman, A. S. R., Yin, H., Cheng, J., Zhang, Q., & Angmo, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703704 · Cited by 224
Inkjet‐Printed Micrometer‐Thick Perovskite Solar Cells with Large Columnar Grains
Eggers, H., Schackmar, F., Abzieher, T., Sun, Q., Lemmer, U., Vaynzof, Y., Richards, B. S., Hernandez‐Sosa, G., & Paetzold, U. W. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903184 · Cited by 224
Thermal engineering of FAPbI3 perovskite material via radiative thermal annealing and in situ XRD
Pool, V. L., Dou, B., Van Campen, D. G., Klein-Stockert, T. R., Barnes, F. S., Shaheen, S. E., Ahmad, M. I., van Hest, M. F. A. M., & Toney, M. F. (2017) · Nature Communications · doi:10.1038/ncomms14075 · Cited by 219
Blade-Coated Hybrid Perovskite Solar Cells with Efficiency > 17%: An In Situ Investigation
Zhong, Y., Munir, R., Li, J., Tang, M.-C., Niazi, M. R., Smilgies, D.-M., Zhao, K., & Amassian, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00428 · Cited by 219
Subbiah, A. S., Isikgor, F. H., Howells, C. T., Bastiani, M. D., Liu, J., Aydın, E., Furlan, F., Allen, T. G., Xu, F., Zhumagali, S., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01297 · Cited by 214
Chang, N. L., Yi Ho‐Baillie, A. W., Basore, P. A., Young, T. L., Evans, R., & Egan, R. J. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2871 · Cited by 212
Ultrafast laser-annealing of perovskite films for efficient perovskite solar cells
You, P., Li, G., Tang, G., Cao, J., & Yan, F. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02324k · Cited by 210
Cotella, G., Baker, J., Worsley, D., De Rossi, F., Pleydell-Pearce, C., Carnie, M., & Watson, T. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.09.013 · Cited by 209
Ye, F., Chen, H., Xie, F., Tang, W., Yin, M., He, J., Bi, E., Wang, Y., Yang, X., & Han, L. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01411a · Cited by 206
Li, P., Liang, C., Bao, B., Li, Y., Hu, X., Wang, Y., Zhang, Y., Li, F., Shao, G., & Song, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.049 · Cited by 202
Roadmap on organic–inorganic hybrid perovskite semiconductors and devices
Schmidt-Mende, L., Dyakonov, V., Olthof, S., Ünlü, F., Lê, K. M. T., Mathur, S., Karabanov, A. D., Lupascu, D. C., Herz, L. M., Hinderhofer, A., et al. (2021) · APL Materials · doi:10.1063/5.0047616 · Cited by 201
Self-citationPhilippe, B., Saliba, M., Correa-Baena, J.-P., Cappel, U. B., Turren-Cruz, S.-H., Grätzel, M., Hagfeldt, A., & Rensmo, H. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00126 · Cited by 199
Self-citationInkjet-Printed Triple Cation Perovskite Solar Cells
Mathies, F., Eggers, H., Richards, B. S., Hernandez-Sosa, G., Lemmer, U., & Paetzold, U. W. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00222 · Cited by 199
Self‐Assembled 2D Perovskite Layers for Efficient Printable Solar Cells
Zuo, C., Scully, A. D., Vak, D., Tan, W., Jiao, X., McNeill, C. R., Angmo, D., Ding, L., & Gao, M. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803258 · Cited by 190
Dye-sensitized TiO2 thin-film solar cell research at the National Renewable Energy Laboratory (NREL)
Deb, S. K. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.09.007 · Cited by 184
Sahu, A., Garg, A., & Dixit, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.04.044 · Cited by 182
Amorphous hole-transporting layer in slot-die coated perovskite solar cells
Qin, T., Huang, W., Kim, J.-E., Vak, D., Forsyth, C., McNeill, C. R., & Cheng, Y.-B. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.022 · Cited by 174
Hashmi, S. G., Martineau, D., Li, X., Ozkan, M., Tiihonen, A., Dar, M. I., Sarikka, T., Zakeeruddin, S. M., Paltakari, J., Lund, P. D., et al. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600183 · Cited by 172
Heo, J. H., Zhang, F., Xiao, C., Heo, S. J., Park, J. K., Berry, J. J., Zhu, K., & Im, S. H. (2021) · Joule · doi:10.1016/j.joule.2020.12.010 · Cited by 172
Hu, J., Wang, C., Qiu, S., Zhao, Y., Gu, E., Zeng, L., Yang, Y., Li, C., Liu, X., Forberich, K., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000173 · Cited by 171
Wu, W., Rudd, P. N., Wang, Q., Yang, Z., & Huang, J. (2020) · Advanced Materials · doi:10.1002/adma.202000995 · Cited by 170
Overcoming the Challenges of Large-Area High-Efficiency Perovskite Solar Cells
Kim, J., Yun, J. S., Cho, Y., Lee, D. S., Wilkinson, B., Soufiani, A. M., Deng, X., Zheng, J., Shi, A., Lim, S., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00573 · Cited by 168
Laser Crystallization of Organic–Inorganic Hybrid Perovskite Solar Cells
Jeon, T., Jin, H. M., Lee, S. H., Lee, J. M., Park, H. I., Kim, M. K., Lee, K. J., Shin, B., & Kim, S. O. (2016) · ACS Nano · doi:10.1021/acsnano.6b03815 · Cited by 160
Pham, N. D., Tiong, V. T., Chen, P., Wang, L., Wilson, G. J., Bell, J. M., & Wang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta11139d · Cited by 158
Controlling the crystallization dynamics of photovoltaic perovskite layers on larger-area coatings
Zeng, L., Chen, S., Forberich, K., Brabec, C. J., Mai, Y., & Guo, F. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02575e · Cited by 158
Kim, J., Kim, S., Zuo, C., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809194 · Cited by 156
Fully Spray-Coated Triple-Cation Perovskite Solar Cells
Bishop, J. E., Read, C. D., Smith, J. A., et al. (2020) · Scientific Reports · doi:10.1038/s41598-020-63674-5 · Cited by 155
Perovskite solar cells must come of age
Saliba, M. (2018) · Science · doi:10.1126/science.aar5684 · Cited by 153
Self-citationSpray‐Cast Multilayer Organometal Perovskite Solar Cells Fabricated in Air
Mohamad, D. K., Griffin, J., Bracher, C., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600994 · Cited by 150
Ink Engineering of Inkjet Printing Perovskite
Li, Z., Li, P., Chen, G., Cheng, Y., Pi, X., Yu, X., Yang, D., Han, L., Zhang, Y., & Song, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c09485 · Cited by 147
Flash Infrared Annealing for Antisolvent‐Free Highly Efficient Perovskite Solar Cells
Sánchez, S., Hua, X., Phung, N., Steiner, U., & Abate, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702915 · Cited by 144
Slot die coated planar perovskite solar cells via blowing and heating assisted one step deposition
Kim, J., Jung, Y.-S., Heo, Y., Hwang, K., Qin, T., Kim, D., & Vak, D. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.02.003 · Cited by 141
Rapid Open-Air Fabrication of Perovskite Solar Modules
Rolston, N., Scheideler, W. J., Flick, A. C., Chen, J. P., Elmaraghi, H., Sleugh, A., Zhao, O., Woodhouse, M. A., & Dauskardt, R. H. (2020) · Joule · doi:10.1016/j.joule.2020.11.001 · Cited by 141
Kosmatos, K. O., Theofylaktos, L., Giannakaki, E., Deligiannis, D., Konstantakou, M., & Στεργιόπουλος, Θ. (2019) · Energy & environment materials · doi:10.1002/eem2.12040 · Cited by 140
Spray‐Coated Colloidal Perovskite Quantum Dot Films for Highly Efficient Solar Cells
Yuan, J., Bi, C., Wang, S., Guo, R., Shen, T., Zhang, L., & Tian, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906615 · Cited by 140
Multipass inkjet printed planar methylammonium lead iodide perovskite solar cells
Mathies, F., Abzieher, T., Hochstuhl, A., Glaser, K., Colsmann, A., Paetzold, U. W., Hernandez‐Sosa, G., Lemmer, U., & Quintilla, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07972e · Cited by 138
Byranvand, M. M., Kim, T., Song, S., Kang, G., Ryu, S. U., & Park, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702235 · Cited by 138
Self-citationPark, M.-C., Cho, W., Lee, G., et al. (2018) · Small · doi:10.1002/smll.201804005 · Cited by 137
Advances in Spray-Cast Perovskite Solar Cells
Bishop, J. E., Routledge, T. J., & Lidzey, D. G. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00311 · Cited by 136
Wang, Z., Zeng, L., Zhang, C., Lu, Y., Qiu, S., Wang, C., Liu, C., Pan, L., Wu, S., Hu, J., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001240 · Cited by 134
Sánchez, S., Neururer, C., Grobéty, B., Phung, N., Steiner, U., Saliba, M., & Abate, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802060 · Cited by 129
Self-citationHu, H., Ren, Z., Fong, W. K., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900092 · Cited by 129
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie · doi:10.1002/ange.201408638 · Cited by 124
One‐Step Inkjet Printed Perovskite in Air for Efficient Light Harvesting
Liang, C., Li, P., Gu, H., Zhang, Y., Li, F., Song, Y., Shao, G., Mathews, N., & Xing, G. (2018) · Solar RRL · doi:10.1002/solr.201700217 · Cited by 122
Defect Passivation of Perovskite Films for Highly Efficient and Stable Solar Cells
Byranvand, M. M., & Saliba, M. (2021) · Solar RRL · doi:10.1002/solr.202100295 · Cited by 121
Self-citationVidal, R., Alberola‐Borràs, J., Sánchez‐Pantoja, N., & Mora‐Seró, I. (2021) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202000088 · Cited by 119
Perovskite Solar Cells with All‐Inkjet‐Printed Absorber and Charge Transport Layers
Schackmar, F., Eggers, H., Frericks, M., Richards, B. S., Lemmer, U., Hernandez‐Sosa, G., & Paetzold, U. W. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000271 · Cited by 118
Photonic flash-annealing of lead halide perovskite solar cells in 1 ms
Troughton, J., Carnie, M. J., Davies, M. L., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09431c · Cited by 117
Zhang, J., Bu, T., Li, J., Li, H., Mo, Y., Wu, Z., Liu, Y., Zhang, X., Cheng, Y., & Huang, F. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02043e · Cited by 105
Xia, X., Wu, W., Li, H., Zheng, B., Xue, Y., Xu, J. P., Zhang, D., Gao, C., & Liu, X. (2016) · RSC Advances · doi:10.1039/c5ra23359c · Cited by 104
High-Efficiency Spray-Coated Perovskite Solar Cells Utilizing Vacuum-Assisted Solution Processing
Bishop, J. E., Smith, J. A., Greenland, C., Kumar, V., Vaenas, N., Game, O. S., Routledge, T. J., Wong‐Stringer, M., Rodenburg, C., & Lidzey, D. G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14859 · Cited by 103
Burkitt, D., Patidar, R., Greenwood, P., Hooper, K. E. A., McGettrick, J., Dimitrov, S. D., Colombo, M., Stoichkov, V., Richards, D., Beynon, D., et al. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00460j · Cited by 99
Efficient triple-mesoscopic perovskite solar mini-modules fabricated with slot-die coating
Xu, M., Ji, W., Sheng, Y., Wu, Y., Cheng, H., Meng, J., Yan, Z., Xu, J., Mei, A., Hu, Y., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104842 · Cited by 96
Hashmi, S. G., Tiihonen, A., Martineau, D., Özkan, M., Vivo, P., Kaunisto, K. M., Vainio, U., Zakeeruddin, S. M., & Grätzel, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10605f · Cited by 93
Yang, F., Dong, L., Jang, D., Saparov, B., Tam, K. C., Zhang, K., Li, N., Brabec, C. J., & Egelhaaf, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101219 · Cited by 90
Rapid processing of perovskite solar cells in under 2.5 seconds
Troughton, J., Charbonneau, C. M. E., Carnie, M. J., Davies, M. L., Worsley, D. A., & Watson, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00568j · Cited by 88
Abbas, M., Zeng, L., Guo, F., Rauf, M., Yuan, X., & Cai, B. (2020) · Materials · doi:10.3390/ma13214851 · Cited by 84
Spray-cast multilayer perovskite solar cells with an active-area of 1.5 cm2
Bishop, J. E., Mohamad, D. K., Wong‐Stringer, M., Smith, A., & Lidzey, D. G. (2017) · Scientific Reports · doi:10.1038/s41598-017-08642-2 · Cited by 83
Forgács, D., Sessolo, M., & Bolink, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03169a · Cited by 82
Chang, W., Lan, D., Lee, K., Wang, X., & Liu, C. (2016) · ChemSusChem · doi:10.1002/cssc.201601711 · Cited by 79
Influence of growth temperature on bulk and surface defects in hybrid lead halide perovskite films
Peng, W., Anand, B., Liu, L., Sampat, S., Bearden, B. E., Malko, A. V., & Chabal, Y. J. (2015) · Nanoscale · doi:10.1039/c5nr06222e · Cited by 78
Fong, W. K., Hu, H., Ren, Z., Liu, K., Cui, L., Bi, T., Liang, Q., Wu, Z., Hao, J., & Li, G. (2021) · Advanced Science · doi:10.1002/advs.202003359 · Cited by 77
Gong, C., Tong, S., Huang, K., Li, H., Huang, H., Zhang, J., & Yang, J. (2019) · Solar RRL · doi:10.1002/solr.201900204 · Cited by 76
Intense Pulsed Light Sintering of CH3NH3PbI3 Solar Cells
Lavery, B. W., Kumari, S., Konermann, H., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10166 · Cited by 73
Scalable Fabrication of Perovskite Solar Cells to Meet Climate Targets
Brüning, K., Dou, B., Simonaitis, J., Lin, Y.-Y., van Hest, M. F. A. M., & Tassone, C. J. (2018) · Joule · doi:10.1016/j.joule.2018.09.014 · Cited by 71
Gao, L., & Yang, G. (2019) · Solar RRL · doi:10.1002/solr.201900200 · Cited by 70
Hong, S. C., Lee, G., Ha, K., Yoon, J., Ahn, N., Cho, W., Park, M.-C., & Choi, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15095 · Cited by 67
Inkjet printed mesoscopic perovskite solar cells with custom design capability
Verma, A., Martineau, D., Abdolhosseinzadeh, S., Heier, J., & Nüesch, F. A. (2020) · Materials Advances · doi:10.1039/d0ma00077a · Cited by 65
Mohammadi, M., Gholipour, S., Byranvand, M. M., Abdi, Y., Taghavinia, N., & Saliba, M. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c11628 · Cited by 64
Self-citationChou, L., Wang, X. F., Osaka, I., Wu, C., & Liu, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12463 · Cited by 62
Intense pulsed light processing for photovoltaic manufacturing
Druffel, T., Dharmadasa, R., Lavery, B. W., et al. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.09.010 · Cited by 60
Toward Scalable Perovskite Solar Modules Using Blade Coating and Rapid Thermal Processing
Ouyang, Z., Yang, M., Whitaker, J. B., Li, D., & van Hest, M. F. A. M. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00180 · Cited by 59
Lee, J., Lee, T. H., Byranvand, M. M., Choi, K., Kim, H. I., Park, S. A., Kim, J. Y., & Park, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00479j · Cited by 56
Self-citationChen, S., Zhang, L., Yan, L., Xiang, X. ‐., Zhao, X., Yang, S., & Xu, B. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905487 · Cited by 56
Challenges and approaches towards upscaling the assembly of hybrid perovskite solar cells
Shalan, A. E. (2020) · Materials Advances · doi:10.1039/d0ma00128g · Cited by 56
Xu, Z., Chen, R., Wu, Y., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta09101g · Cited by 55
Gheno, A., Huang, Y. B., Bouclé, J., et al. (2018) · Solar RRL · doi:10.1002/solr.201800191 · Cited by 53
Basu, A., Celma, G., Strømme, M., & Ferraz, N. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00370 · Cited by 53
Taherianfard, H., Kim, G., Ebadi, F., Abzieher, T., Choi, K., Paetzold, U. W., Richards, B. S., Eliwi, A. A., Tajabadi, F., Taghavinia, N., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10828 · Cited by 53
Self-citationHighly efficient and rapid manufactured perovskite solar cells via Flash InfraRed Annealing
Sánchez, S., Jerónimo-Rendon, J. J., Saliba, M., & Hagfeldt, A. (2019) · Materials Today · doi:10.1016/j.mattod.2019.11.003 · Cited by 52
Self-citationZhang, L., Chen, S., Wang, X., Wang, D., Li, Y., Ai, Q., Sun, X., Chen, J., Li, Y., Jiang, X., et al. (2021) · Solar RRL · doi:10.1002/solr.202100106 · Cited by 49
Biopolymer passivation for high-performance perovskite solar cells by blade coating
Qiu, S., Xu, X., Zeng, L., Wang, Z., Chen, Y., Zhang, C., Li, C., Hu, J., Shi, T., Mai, Y., et al. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.05.040 · Cited by 47
Laminated Perovskite Photovoltaics: Enabling Novel Layer Combinations and Device Architectures
Schmager, R., Roger, J., Schwenzer, J. A., Schackmar, F., Abzieher, T., Byranvand, M. M., Nejand, B. A., Worgull, M., Richards, B. S., & Paetzold, U. W. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907481 · Cited by 46
Self-citationXu, F., Liu, J., Subbiah, A. S., et al. (2021) · Small Science · doi:10.1002/smsc.202000044 · Cited by 46
Konidakis, I., Maksudov, T., Serpetzoglou, E., Kakavelakis, G., Kymakis, E., & Stratakis, E. I. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b01152 · Cited by 43
Küffner, J., Wahl, T., Schultes, M., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15428 · Cited by 42
Li, N., Liu, J., Li, C., Li, Y., Jia, J., Wu, Y., Yu, H., Yuan, B., & Cao, B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c00417 · Cited by 41
Chemical vapor deposited polymer layer for efficient passivation of planar perovskite solar cells
Byranvand, M. M., Behboodi‐Sadabad, F., Eliwi, A. A., Trouillet, V., Welle, A., Ternes, S., Hossain, I. M., Khan, M. R., Schwenzer, J. A., Farooq, A., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta06646j · Cited by 39
Self-citationHeat dissipation effects on the stability of planar perovskite solar cells
Choi, K., Lee, J.-W., Choi, H., Kim, G.-W., Kim, H. I., & Park, T. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02859b · Cited by 39
Huang, Z., Hu, X., Xing, Z., Meng, X., Duan, X., Long, J., Hu, T., Tan, L., & Chen, Y. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c00908 · Cited by 32
Xu, W., Daunis, T. B., Piper, R. T., et al. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c01243 · Cited by 31
Yu, X., Xue, Y., Xiao, J., et al. (2020) · The Journal of Chemical Physics · doi:10.1063/5.0012803 · Cited by 27
Yin, J., Lin, Y.-C., Zhang, C., Li, J., & Zheng, N. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05172 · Cited by 23
Parvazian, E., Abdollah-zadeh, A., Dehghani, M., & Taghavinia, N. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00707 · Cited by 20
Self-citationByranvand, M. M., Taghavinia, N., Kharat, A. N., & Dabirian, A. (2015) · RSC Advances · doi:10.1039/c5ra18349a · Cited by 14
Self-citationCharge carrier management for developing high-efficiency perovskite solar cells
Byranvand, M. M., & Saliba, M. (2021) · Matter · doi:10.1016/j.matt.2021.04.020 · Cited by 11
Self-citationByranvand, M. M., Kharat, A. N., Taghavinia, N., & Dabirian, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00348 · Cited by 10
Self-citation
Cited by
Bu, T., Ono, L. K., Li, J., Su, J., Tong, G., Zhang, W., Liu, Y., Zhang, J., Chang, J., Kazaoui, S., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01039-0 · Cited by 235
Metadata
- Authors
- Saki, Z., Byranvand, M. M., Taghavinia, N., Kedia, M., & Saliba, M.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2021
- Volume
- 14
- Issue
- 11
- Pages
- 5690-5722
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W3193599816
- Cited by
- 263
- References
- 166
- FWCI
- 10.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.