The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Direct 3D cell-printing of human skin with functional transwell system
Open accessAbstract
Three-dimensional (3D) cell-printing has been emerging as a promising technology with which to build up human skin models by enabling rapid and versatile design. Despite the technological advances, challenges remain in the development of fully functional models that recapitulate complexities in the native tissue. Moreover, although several approaches have been explored for the development of biomimetic human skin models, the present skin models based on multistep fabrication methods using polydimethylsiloxane chips and commercial transwell inserts could be tackled by leveraging 3D cell-printing technology. In this paper, we present a new 3D cell-printing strategy for engineering a 3D human skin model with a functional transwell system in a single-step process. A hybrid 3D cell-printing system was developed, allowing for the use of extrusion and inkjet modules at the same time. We began by revealing the significance of each module in engineering human skin models; by using the extrusion-dispensing module, we engineered a collagen-based construct with polycaprolactone (PCL) mesh that prevented the contraction of collagen during tissue maturation; the inkjet-based dispensing module was used to uniformly distribute keratinocytes. Taking these features together, we engineered a human skin model with a functional transwell system; the transwell system and fibroblast-populated dermis were consecutively fabricated by using the extrusion modules. Following this process, keratinocytes were uniformly distributed onto the engineered dermis by the inkjet module. Our transwell system indicates a supportive 3D construct composed of PCL, enabling the maturation of a skin model without the aid of commercial transwell inserts. This skin model revealed favorable biological characteristics that included a stabilized fibroblast-stretched dermis and stratified epidermis layers after 14 days. It was also observed that a 50 times reduction in cost was achieved and 10 times less medium was used than in a conventional culture. Collectively, because this single-step process opens up chances for versatile designs, we envision that our cell-printing strategy could provide an attractive platform in engineering various human skin models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
Photocrosslinkable Gelatin Hydrogel for Epidermal Tissue Engineering
Zhao, X., Lang, Q., Yildirimer, L., Lin, Z. Y., Cui, W., Annabi, N., Ng, K. W., Dokmeci, M. R., Ghaemmaghami, A. M., & Khademhosseini, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500005 · Cited by 832
Metcalfe, A. D., & Ferguson, M. W. J. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0179 · Cited by 785
Getting under the skin of epidermal morphogenesis
Fuchs, E., & Raghavan, S. (2002) · Nature Reviews Genetics · doi:10.1038/nrg758 · Cited by 753
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Self-citationLee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
Self-citation3D-printed microfluidic devices
Amin, R., Knowlton, S., Hart, A., Yenilmez, B., Ghaderinezhad, F., Katebifar, S., Messina, M., Khademhosseini, A., & Tasoglu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/022001 · Cited by 349
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
Vijayavenkataraman, S., Lu, W. F., & Fuh, J. Y. H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032001 · Cited by 273
Fibroblast heterogeneity and its implications for engineering organotypic skin models in vitro
Sriram, G., Bigliardi, P. L., & Bigliardi-Qi, M. (2015) · European Journal of Cell Biology · doi:10.1016/j.ejcb.2015.08.001 · Cited by 269
Flexible pH‐Sensing Hydrogel Fibers for Epidermal Applications
Tamayol, A., Akbari, M., Zilberman, Y., Comotto, M., Lesha, E., Serex, L., Bagherifard, S., Chen, Y., Fu, G., Ameri, S. K., et al. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500553 · Cited by 262
Skin Bioprinting: Impending Reality or Fantasy?
Ng, W. L., Wang, S., Yeong, W. Y., & Naing, M. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.04.006 · Cited by 249
Three‐Dimensional Human Tissue Chips Fabricated by Rapid and Automatic Inkjet Cell Printing
Matsusaki, M., Sakaue, K., Kadowaki, K., & Akashi, M. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200299 · Cited by 188
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Three‐Dimensional Tissue Models of Normal and Diseased Skin
Carlson, M. W., Alt‐Holland, A., Egles, C., & Garlick, J. A. (2008) · Current Protocols in Cell Biology · doi:10.1002/0471143030.cb1909s41 · Cited by 158
Cardiac tissue engineering: regeneration of the wounded heart
Zammaretti, P., & Jaconi, M. E. (2004) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2004.08.007 · Cited by 157
Establishment of 3D organotypic cultures using human neonatal epidermal cells
Gangatirkar, P., Paquet‐Fifield, S., Li, A., Rossi, R., & Kaur, P. (2007) · Nature Protocols · doi:10.1038/nprot.2006.448 · Cited by 156
Epidermal Homeostasis in Long-Term Scaffold-Enforced Skin Equivalents
Stark, H., Boehnke, K., Mirancea, N., Willhauck, M. J., Pavesio, A., Fusenig, N. E., & Boukamp, P. (2006) · Journal of Investigative Dermatology Symposium Proceedings · doi:10.1038/sj.jidsymp.5650015 · Cited by 151
3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs
Knowlton, S. M., Yu, C. H., Ersoy, F., Emadi, S., Khademhosseini, A., & Taşoğlu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025019 · Cited by 144
Towards Single-Step Biofabrication of Organs on a Chip via 3D Printing
Knowlton, S. M., Yenilmez, B., & Taşoğlu, S. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.06.005 · Cited by 117
Development of an in vitro model for studying the penetration of chemicals through compromised skin
Davies, D. J., Heylings, J. R., McCarthy, T. J., & Correa, C. M. (2014) · Toxicology in Vitro · doi:10.1016/j.tiv.2014.09.012 · Cited by 76
In Vitro Model of the Epidermis
Arnette, C. R., Koetsier, J. L., Hoover, P., Getsios, S., & Green, K. J. (2015) · Methods in enzymology on CD-ROM/Methods in enzymology · doi:10.1016/bs.mie.2015.07.015 · Cited by 70
Three-Dimensional In Vitro Skin and Skin Cancer Models Based on Human Fibroblast-Derived Matrix
Berning, M., Praetzel‐Wunder, S., Bickenbach, J. R., & Boukamp, P. (2015) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0698 · Cited by 62
Hittinger, M., Juntke, J., Kletting, S., Schneider‐Daum, N., Carvalho, C. D. S., & Lehr, C. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.10.011 · Cited by 60
Direct 3D-printing of cell-laden constructs in microfluidic architectures
Liu, J., Hwang, H. H., Wang, P., Whang, G. J., & Chen, S. (2016) · Lab on a Chip · doi:10.1039/c6lc00144k · Cited by 59
Reconstruction of Normal and Pathological Human Epidermis on Polycarbonate Filter
Vuyst, É. D., Charlier, C., Giltaire, S., Glas, V. D., de Rouvroit, C. L., & Poumay, Y. (2013) · Methods in molecular biology · doi:10.1007/7651_2013_40 · Cited by 52
Endogenous human skin equivalent promotes in vitro morphogenesis of follicle-like structures
Casale, C., Imparato, G., Urciuolo, F., & Netti, P. A. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.05.047 · Cited by 50
Tsai, P., Zhang, Z., Florek, C. A., & Michniak‐Kohn, B. B. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2015.0209 · Cited by 22
Cited by
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Advanced drug delivery systems and artificial skin grafts for skin wound healing
Kim, H. S., Sun, X., Lee, J.-H., Kim, H.-W., Fu, X., & Leong, K. W. (2019) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.12.014 · Cited by 625
Self-citation
Metadata
- Authors
- Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-06-06
- Volume
- 9
- Issue
- 2
- Pages
- 025034
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2621963256
- Cited by
- 282
- References
- 36
- FWCI
- 11.52
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.