Decellularized extracellular matrix-based bio-ink with enhanced 3D printability and mechanical properties
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
Recently, decellularized extracellular matrix-based bio-ink (dECM bio-ink) derived from animal organs is attracting attention because of its excellent biocompatibility. However, its poor 3D printability and weak mechanical properties remain a challenge. Here, we developed a new dECM bio-ink with enhanced 3D printability and mechanical properties. dECM micro-particles of about 13.4 μ m in size were prepared by decellularizing a porcine liver followed by freeze-milling. The new bio-ink, named as dECM powder-based bio-ink (dECM pBio-ink), was prepared by loading the dECM micro-particles into a gelatin mixture. The usefulness of the dECM pBio-ink was evaluated by assessing its mechanical properties, printability, and cytocompatibility. The results showed that its mechanical properties and 3D printability were greatly improved. Its elastic modulus increased by up to 9.17 times that of the conventional dECM bio-ink. Micro-patterns with living cells were successfully achieved with 93% cell viability. Above all, the new bio-ink showed superior performance in stacking of layers for 3D printing, whereas the conventional bio-ink could not maintain its shape. Finally, we demonstrated that the dECM pBio-ink possessed comparable cytocompatibility with the conventional dECM bio-ink through in vitro tests with endothelial cells and primary mouse hepatocytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chapter 4 Preparation of Isolated Rat Liver Cells
Seglen, P. O. (1976) · Methods in Cell Biology · doi:10.1016/s0091-679x(08)61797-5 · Cited by 5,310
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Self-citationCell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Uygun, B. E., Soto-Gutierrez, A., Yagi, H., Izamis, M.-L., Guzzardi, M. A., Shulman, C., Milwid, J., Kobayashi, N., Tilles, A., Berthiaume, F., et al. (2010) · Nature Medicine · doi:10.1038/nm.2170 · Cited by 1,370
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
The use of whole organ decellularization for the generation of a vascularized liver organoid
Baptista, P. M., Siddiqui, M. M., Lozier, G., Rodriguez, S. R., Atala, A., & Soker, S. (2011) · Hepatology · doi:10.1002/hep.24067 · Cited by 681
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Haines-Butterick, L., Rajagopal, K., Branco, M., Salick, D., Rughani, R., Pilarz, M., Lamm, M. S., Pochan, D. J., & Schneider, J. P. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0701980104 · Cited by 642
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Decellularized tissue-engineered blood vessel as an arterial conduit
Quint, C., Kondo, Y., Manson, R. J., Lawson, J. H., Dardik, A., & Niklason, L. E. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1019506108 · Cited by 368
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Lee, H., Han, W., Kim, H., Ha, D.-H., Jang, J., Kim, B. S., & Cho, D.-W. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01908 · Cited by 328
Choi, Y.-J., Jun, Y.-J., Kim, D. Y., Yi, H.-G., Chae, S.-H., Kang, J., Lee, J., Gao, G., Kong, J.-S., Jang, J., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.036 · Cited by 314
Maintenance of Human Hepatocyte Function In Vitro by Liver-Derived Extracellular Matrix Gels
Sellaro, T. L., Ranade, A., Faulk, D. M., McCabe, G. P., Dorko, K., Badylak, S. F., & Strom, S. C. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0587 · Cited by 276
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Human liver cell spheroids in extended perfusion bioreactor culture for repeated-dose drug testing
Tostões, R. M., Leite, S. B., Serra, M., Jensen, J., Björquist, P., Carrondo, M. J. T., Brito, C., & Alves, P. M. (2012) · Hepatology · doi:10.1002/hep.24760 · Cited by 246
Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2007.0392 · Cited by 203
Heparin-based hydrogel as a matrix for encapsulation and cultivation of primary hepatocytes
Kim, M., Lee, J. Y., Jones, C. N., Revzin, A., & Tae, G. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.068 · Cited by 202
Self-citationAn injectable extracellular matrix derived hydrogel for meniscus repair and regeneration
Wu, J., Ding, Q., Dutta, A., Wang, Y., Huang, Y.-H., Weng, H., Tang, L., & Hong, Y. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.027 · Cited by 194
Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-09201-5 · Cited by 165
Self-citationDevelopment and characterization of a naturally derived lung extracellular matrix hydrogel
Pouliot, R. A., Link, P. A., Mikhaiel, N. S., Schneck, M. B., Valentine, M. S., Kamga Gninzeko, F. J., Herbert, J. A., Sakagami, M., & Heise, R. L. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35726 · Cited by 151
Das, S., Kim, S.-W., Choi, Y.-J., Lee, S., Lee, S.-H., Kong, J.-S., Park, H.-J., Cho, D.-W., & Jang, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.026 · Cited by 150
Self-citationHuman versus porcine tissue sourcing for an injectable myocardial matrix hydrogel
Johnson, T. D., DeQuach, J. A., Gaetani, R., Ungerleider, J., Elhag, D., Nigam, V., Behfar, A., & Christman, K. L. (2014) · Biomater. Sci. · doi:10.1039/c3bm60283d · Cited by 121
Development of Bioink from Decellularized Tendon Extracellular Matrix for 3D Bioprinting
Toprakhisar, B., Nadernezhad, A., Bakirci, E., Khani, N., Skvortsov, G. A., & Koc, B. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800024 · Cited by 101
Development of Printable Natural Cartilage Matrix Bioink for 3D Printing of Irregular Tissue Shape
Jung, C. S., Kim, B. K., Lee, J., Min, B., & Park, S. (2017) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-017-0104-8 · Cited by 101
A potential dermal substitute using decellularized dermis extracellular matrix derived bio-ink
Won, J.-Y., Lee, M.-H., Kim, M.-J., Min, K.-H., Ahn, G., Han, J.-S., Jin, S., Yun, W.-S., & Shim, J.-H. (2019) · Artificial Cells, Nanomedicine, and Biotechnology · doi:10.1080/21691401.2019.1575842 · Cited by 87
Self-citationIn vitro behaviors of hydroxyapatite reinforced polyvinyl alcohol hydrogel composite
Wu, G., Su, B., Zhang, W., & Wang, C. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.07.028 · Cited by 83
Brown, C. F. C., Jing, Y., Han, T. T. Y., Marecak, D. M., Amsden, B. G., & Flynn, L. E. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/4/045010 · Cited by 78
No, D. Y., Lee, S.-A., Choi, Y. Y., Park, D., Jang, J. Y., Kim, D.-S., & Lee, S.-H. (2012) · PLoS ONE · doi:10.1371/journal.pone.0050723 · Cited by 75
Self-citationBeachley, V., Ma, G., Papadimitriou, C., Gibson, M., Corvelli, M., & Elisseeff, J. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36218 · Cited by 72
Fitzpatrick, E., Wu, Y., Dhadda, P., Hughes, R. D., Mitry, R. R., Qin, H., Lehec, S. C., Heaton, N. D., & Dhawan, A. (2015) · Cell Transplantation · doi:10.3727/096368913x674080 · Cited by 61
Hu, X., Zhou, J., Zhang, N., Tan, H., & Gao, C. (2008) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2008.02.001 · Cited by 56
Liang, R., Yang, G., Kim, K. E., D’Amore, A., Pickering, A. N., Zhang, C., & Woo, S. L. (2015) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2015.05.001 · Cited by 34
Oct4 and Hnf4α-induced hepatic stem cells ameliorate chronic liver injury in liver fibrosis model
Park, M. R., Wong, M. S., Araúzo-Bravo, M. J., Lee, H.-A., Nam, D., Park, S. Y., Seo, H. D., Lee, S. M., Zeilhofer, H. F., Zaehres, H., et al. (2019) · PLoS ONE · doi:10.1371/journal.pone.0221085 · Cited by 18
Self-citationBioreactor conditioning of valve scaffolds seeded internally with adult stem cells
Kennamer, A., Sierad, L. N., Pascal, R., Rierson, N., Albers, C., Harpa, M. M., Cotoi, O. S., Harceaga, L., Olah, P., Preda, T., et al. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-9114-1 · Cited by 15
Zhai, C., Zhang, X., Chen, J., He, J., Hao, F., Liu, Y., Luo, C., & Fan, W. (2019) · Regenerative Medicine · doi:10.2217/rme-2018-0082 · Cited by 11
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465
Brown, M., Li, J., Moraes, C., Tabrizian, M., & Li-Jessen, N. Y. K. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121786 · Cited by 282
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
Engineering bioinks for 3D bioprinting
Decante, G., Costa, J. B., Silva-Correia, J., Collins, M. N., Reis, R. L., & Oliveira, J. M. (2021) · Biofabrication · doi:10.1088/1758-5090/abec2c · Cited by 237
Metadata
- Authors
- Kim, M. K., Jeong, W., Lee, S. M., Kim, J. B., Jin, S., & Kang, H.-W.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2020-01-31
- Volume
- 12
- Issue
- 2
- Pages
- 025003
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2989988908
- Cited by
- 161
- References
- 41
- FWCI
- 4.64
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.