Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 180 of the 204 references it cites were found in a registry or an index; 79 of the 111 sources its claims cite were checked for support.

The milky way total mass profile as inferred from Gaia DR2

Open access

Abstract

We determine the Milky Way (MW) mass profile inferred from fitting physically motivated models to the Gaia DR2 Galactic rotation curve and other data. Using various hydrodynamical simulations of MW-mass haloes, we show that the presence of baryons induces a contraction of the dark matter (DM) distribution in the inner regions, r ≲ 20 kpc. We provide an analytic expression that relates the baryonic distribution to the change in the DM halo profile. For our galaxy, the contraction increases the enclosed DM halo mass by factors of roughly 1.3, 2, and 4 at radial distances of 20, 8, and 1 kpc, respectively compared to an uncontracted halo. Ignoring this contraction results in systematic biases in the inferred halo mass and concentration. We provide a best-fitting contracted NFW halo model to the MW rotation curve that matches the data very well.1 The best-fit has a DM halo mass, $M_{200}^{\rm DM}=0.97_{-0.19}^{+0.24}\times 10^{12}\,\mathrm{M}_\odot$, and concentration before baryon contraction of $9.4_{-2.6}^{+1.9}$, which lie close to the median halo mass–concentration relation predicted in ΛCDM. The inferred total mass, $M_{200}^{\rm total}=1.08_{-0.14}^{+0.20} \times 10^{12}\,\mathrm{M}_\odot$, is in good agreement with recent measurements. The model gives an MW stellar mass of $5.04_{-0.52}^{+0.43}\times 10^{10}\,\mathrm{M}_\odot$ and infers that the DM density at the Solar position is $\rho _{\odot }^{\rm DM}=8.8_{-0.5}^{+0.5}\times 10^{-3}\,\mathrm{M}_\odot \,\mathrm{pc}^{-3}\equiv 0.33_{-0.02}^{+0.02}\,\rm {GeV}\,\rm {cm}^{-3}$. The rotation curve data can also be fitted with an uncontracted NFW halo model, but with very different DM and stellar parameters. The observations prefer the physically motivated contracted NFW halo, but the measurement uncertainties are too large to rule out the uncontracted NFW halo.

Overview

CoChat Summary

TL;DR

The paper infers the Milky Way mass profile by fitting physically motivated models to the Gaia DR2 rotation curve and other data, including the baryon-induced contraction of the dark matter halo calibrated on hydrodynamical simulations. It finds a contracted NFW halo with mass and concentration close to ΛCDM expectations, while showing that ignoring contraction biases inferred halo parameters.

Key findings

  • Baryon contraction increases the enclosed DM halo mass by factors of roughly 1.3, 2, and 4 at radial distances of 20, 8, and 1 kpc, respectively, compared with an uncontracted halo.
  • The best-fitting contracted NFW model has \(M_{\rm DM200}=0.97^{+0.24}_{-0.19}\times10^{12}\,M_\odot\), concentration before baryon contraction \(c_{\rm NFW}=9.4^{+1.9}_{-2.6}\), total mass \(M_{\rm total200}=1.08^{+0.20}_{-0.14}\times10^{12}\,M_\odot\), stellar mass \(M_{\star,\rm total}=5.04^{+0.43}_{-0.52}\times10^{10}\,M_\odot\), and local DM density \(\rho_{\rm DM\odot}=8.8^{+0.5}_{-0.5}\times10^{-3}\,M_\odot\,{\rm pc}^{-3}\equiv0.33^{+0.02}_{-0.02}\,{\rm GeV\,cm}^{-3}\).
  • An uncontracted pure NFW halo also fits the data, but with different parameters: \(M_{\rm DM200}=0.82^{+0.09}_{-0.18}\times10^{12}\,M_\odot\), \(c_{\rm NFW}=13.3^{+3.6}_{-2.7}\), and stellar mass \(5.97^{+0.40}_{-0.80}\times10^{10}\,M_\odot\). The observations prefer the contracted NFW halo, but uncertainties are too large to rule out the pure NFW model.
  • The contracted DM density profile varies as \(r^{-2}\) over \(r\in[5,30]\) kpc and cannot be well described by NFW, generalised NFW, or Einasto profiles.

Methods

  • The authors model the Milky Way with seven components: bulge, thin and thick stellar discs, HI disc, molecular gas disc, circumgalactic medium, and a DM halo. They fit this model to the Eilers et al. (2019) Gaia DR2 rotation curve, the Callingham et al. (2019) total mass estimate, a vertical force measurement, and a thin-to-thick disc density ratio, using MCMC with EMCEE.
  • The baryon-induced DM contraction is calibrated using the Auriga, APOSTLE, and EAGLE_recal hydrodynamical simulations, comparing matched hydrodynamical and dark-matter-only haloes. The final sample contains 87 simulated galaxies, and the contraction relation is fitted as a power law with parameters \(A=1.023\pm0.001\) and \(B=-0.540\pm0.002\).
  • The analysis compares a contracted NFW halo model with a pure uncontracted NFW halo model, using the same data and priors, and tests which model is preferred by the rotation curve and other observables.

Limitations

  • Stated: the model assumes a spherically symmetric DM halo, although cosmological simulations predict ellipsoidal shapes; this is argued to be unlikely to affect the inner \(r\lesssim20\) kpc region but could matter at larger distances. The CGM mass and profile are poorly constrained, and the contraction relation was calibrated only for galactic-mass haloes with \(M_{200}\sim1\times10^{12}\,M_\odot\), remaining to be checked outside that mass range.
  • Stated: the data cover only distances beyond 5 kpc from the Galactic Centre, so the bulge mass and profile are not meaningfully constrained and are mostly set by priors. The paper also notes that current measurements cannot unequivocally rule out the pure NFW halo model.
  • Evident from the text: the contraction prescription is extrapolated below 1 kpc, where the authors note it has not been tested, and the fit introduces an additional model uncertainty to account for rotation-curve features such as the dip at \(r\sim9\) kpc, which may downgrade the constraining power of the data.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1093/mnras/staa1017

Cites

180 of 180 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Rotation curves for the 87 simulated galaxies used in this work. Each line corresponds to one system. The lines are coloured according to the stellar mass of the galaxy (see legend at the top). The black symbols with error bars show the Eilers et al. (2019) determination of the MW rotation curve. The error bars correspond to the statistical uncertainties associated with the Eilers et al. measurement. For R > 20 kpc the MW measurement has large ( ∼ 10% or higher) systematic uncertainties and thus should be interpreted with care.
Figure 1 Rotation curves for the 87 simulated galaxies used in this work. Each line corresponds to one system. The lines are coloured according to the stellar mass of the galaxy (see legend at the top). The black symbols with error bars show the Eilers et al. (2019) determination of the MW rotation curve. The error bars correspond to the statistical uncertainties associated with the Eilers et al. measurement. For R > 20 kpc the MW measurement has large ( ∼ 10% or higher) systematic uncertainties and thus should be interpreted with care.From the PDF
Figure 2 The radial dependence of the ratio, η DM , between the enclosed DM mass in the full physics run, M DM ( < r ) , and in the DMO only run, M DMO DM ( < r ) . Each line corresponds to a galaxy inside a MW-mass halo from either the Auriga, APOSTLE or EAGLE_recal hydrodynamical simulations. The lines are coloured according to the stellar mass of the central galaxy (see colour bar at the top of the panel). We show results only for distances larger than that twice the Power et al. (2003) radius (see main text). We show results for multiple resolutions, with the highest resolution systems corresponding to the curves that go down to the lowest r values.
Figure 2 The radial dependence of the ratio, η DM , between the enclosed DM mass in the full physics run, M DM ( < r ) , and in the DMO only run, M DMO DM ( < r ) . Each line corresponds to a galaxy inside a MW-mass halo from either the Auriga, APOSTLE or EAGLE_recal hydrodynamical simulations. The lines are coloured according to the stellar mass of the central galaxy (see colour bar at the top of the panel). We show results only for distances larger than that twice the Power et al. (2003) radius (see main text). We show results for multiple resolutions, with the highest resolution systems corresponding to the curves that go down to the lowest r values.From the PDF
Figure 3 The DM halo response to the assembly of its central galaxy. Top panel : the ratio of the enclosed DM mass, η DM = M DM /M DMO DM , between the baryonic and DMO runs as a function of the ratio, χ tot = M DMO tot /M tot , between the total enclosed mass in the DMO and the baryonic runs. The DM mass in the DMO run is given by M DMO DM = (1 -f bar ) M DMO tot , while the total mass in the hydrodynamic run is M tot = M DM + M bar . The points correspond to 87 galaxies in three suites of simulations whose mass ratios were evaluated at radial distances from 1 kpc up to R 200 . The thick grey line corresponds to the best fitting function described by Equation 10. This sits on top of the running mean, which is show by the orange line. Centre panel: the ratio between the individual points and the best fit function. The orange line with error bars shows the running mean and 68 percentiles of the distribution. Bottom panel: comparison with the mean η DM predicted by the Blumenthal et al. (1986) (dashed line) and Gnedin et al. (2004) (solid line) approximations to an adiabatically contracted halo.
Figure 3 The DM halo response to the assembly of its central galaxy. Top panel : the ratio of the enclosed DM mass, η DM = M DM /M DMO DM , between the baryonic and DMO runs as a function of the ratio, χ tot = M DMO tot /M tot , between the total enclosed mass in the DMO and the baryonic runs. The DM mass in the DMO run is given by M DMO DM = (1 -f bar ) M DMO tot , while the total mass in the hydrodynamic run is M tot = M DM + M bar . The points correspond to 87 galaxies in three suites of simulations whose mass ratios were evaluated at radial distances from 1 kpc up to R 200 . The thick grey line corresponds to the best fitting function described by Equation 10. This sits on top of the running mean, which is show by the orange line. Centre panel: the ratio between the individual points and the best fit function. The orange line with error bars shows the running mean and 68 percentiles of the distribution. Bottom panel: comparison with the mean η DM predicted by the Blumenthal et al. (1986) (dashed line) and Gnedin et al. (2004) (solid line) approximations to an adiabatically contracted halo.From the PDF
Figure 4 Test of the extent to which our method can recover the contracted DM distribution as a function of radial distance. The vertical axis shows the ratio between the predicted enclosed DM mass, M pred DM ( < r ) , and the value measured in the hydrodynamics simulation, M DM ( < r ) . The predicted DM mass is calculated from an NFW fit to the corresponding halo in the DMO run. The top panel shows individual galaxies (grey lines) as well as the mean and the 68 percentiles of the distribution (thick orange line). The bottom panel compares the mean and the 68 percentiles for galaxies in each of the three simulation suites used here: Auriga (blue line), APOSTLE (green line) and EAGLE_recal (red line). Our method for inferring the DM halo contraction is unbiased and works equally well for all three simulations. The halo-to-halo scatter grows from 5% at r = 100 kpc , to 7% at r = 10 kpc and reaches 13% at r = 2 kpc .
Figure 4 Test of the extent to which our method can recover the contracted DM distribution as a function of radial distance. The vertical axis shows the ratio between the predicted enclosed DM mass, M pred DM ( < r ) , and the value measured in the hydrodynamics simulation, M DM ( < r ) . The predicted DM mass is calculated from an NFW fit to the corresponding halo in the DMO run. The top panel shows individual galaxies (grey lines) as well as the mean and the 68 percentiles of the distribution (thick orange line). The bottom panel compares the mean and the 68 percentiles for galaxies in each of the three simulation suites used here: Auriga (blue line), APOSTLE (green line) and EAGLE_recal (red line). Our method for inferring the DM halo contraction is unbiased and works equally well for all three simulations. The halo-to-halo scatter grows from 5% at r = 100 kpc , to 7% at r = 10 kpc and reaches 13% at r = 2 kpc .From the PDF
Figure 5 The radial enclosed mass profile of NFW haloes (dotted lines) and their contracted counterparts (solid lines) given the MW baryonic distribution. The solid black line shows the Galactic enclosed baryonic mass profile. The top panel corresponds to initial NFW haloes of the same mass but different concentrations. The bottom panel corresponds to haloes with the same concentration but different masses.
Figure 5 The radial enclosed mass profile of NFW haloes (dotted lines) and their contracted counterparts (solid lines) given the MW baryonic distribution. The solid black line shows the Galactic enclosed baryonic mass profile. The top panel corresponds to initial NFW haloes of the same mass but different concentrations. The bottom panel corresponds to haloes with the same concentration but different masses.From the PDF
Figure 6 The contraction of the Galactic DM halo for different halo masses and concentrations. The Y-axis is the ratio of the enclosed DM mass in the contracted halo to that in the original NFW halo. In all cases the MW halo, in the absence of baryons, is described by an NFW profile of mass, M 200 , and concentration, c NFW , that is then contracted according to the Galactic baryonic distribution. The top panel shows haloes with mass, M 200 = 1 × 10 12 M ⊙ , and concentrations ranging from 5 to 11. The bottom panels shows haloes with concentration, c NFW = 9 , and masses ranging from 0 . 5 × to 1 . 5 × 10 12 M ⊙ . The orange shaded region shows the 68 percentile halo-to-halo scatter in the predictions as determined in Figure 4 (the scatter is shown only for the orange line). The vertical dotted line shows the Sun's position, r ⊙ = 8 . 2 kpc .
Figure 6 The contraction of the Galactic DM halo for different halo masses and concentrations. The Y-axis is the ratio of the enclosed DM mass in the contracted halo to that in the original NFW halo. In all cases the MW halo, in the absence of baryons, is described by an NFW profile of mass, M 200 , and concentration, c NFW , that is then contracted according to the Galactic baryonic distribution. The top panel shows haloes with mass, M 200 = 1 × 10 12 M ⊙ , and concentrations ranging from 5 to 11. The bottom panels shows haloes with concentration, c NFW = 9 , and masses ranging from 0 . 5 × to 1 . 5 × 10 12 M ⊙ . The orange shaded region shows the 68 percentile halo-to-halo scatter in the predictions as determined in Figure 4 (the scatter is shown only for the orange line). The vertical dotted line shows the Sun's position, r ⊙ = 8 . 2 kpc .From the PDF
Figure 7 Top panel: the density profile of an NFW halo (blue dotted curve) of mass, M 200 = 1 × 10 12 M ⊙ , and concentration, c NFW = 9 , and its contracted counterpart (solid red line) given the MW baryonic distribution. This halo profile is roughly the same as the best fitting Galactic DM halo inferred in Section 5. The grey dotted lines show NFW profiles for the same halo mass but different concentrations. Middle panel: the best fits to the contracted Galactic DM halo (solid red line) with an NFW (green dashed line), generalised NFW (purple dashed line) and Di Cintio et al. (2014, yellow dashed line) profiles. Bottom panel: the relative difference, ρ best fit /ρ contracted -1 , between the contracted halo and the three best fitting profiles shown in the middle panel. The grey shaded region corresponds to r < 1 kpc , the regime within which halo contraction has been extrapolated to radii smaller than those for which we have tested our method.
Figure 7 Top panel: the density profile of an NFW halo (blue dotted curve) of mass, M 200 = 1 × 10 12 M ⊙ , and concentration, c NFW = 9 , and its contracted counterpart (solid red line) given the MW baryonic distribution. This halo profile is roughly the same as the best fitting Galactic DM halo inferred in Section 5. The grey dotted lines show NFW profiles for the same halo mass but different concentrations. Middle panel: the best fits to the contracted Galactic DM halo (solid red line) with an NFW (green dashed line), generalised NFW (purple dashed line) and Di Cintio et al. (2014, yellow dashed line) profiles. Bottom panel: the relative difference, ρ best fit /ρ contracted -1 , between the contracted halo and the three best fitting profiles shown in the middle panel. The grey shaded region corresponds to r < 1 kpc , the regime within which halo contraction has been extrapolated to radii smaller than those for which we have tested our method.From the PDF
Figure 8 Constraints on the mass and concentration of the MW DM halo inferred from the enclosed mass within 8 kpc (top panel) and within 20 kpc (bottom panel). The blue shaded region corresponds to modelling the halo as an NFW profile. The red shaded region corresponds to modelling the halo as an NFW profile that has been contracted by the MW baryonic distribution - in this case the concentration corresponds to the original (uncontracted) halo. The dark and lighter colours show the 68 and 95 percentile confidence regions, respectively. For clarity, for the NFW case in the bottom panel, we show only the 68 percentile confidence region. The vertical dashed line and the associated grey region show the Callingham et al. (2019) MW DM halo mass estimate and its 68 percentile confidence region. The approximately horizontal dashed line and its associated grey region show the median and standard deviation of the halo mass-concentration relation (Hellwing et al. 2016).
Figure 8 Constraints on the mass and concentration of the MW DM halo inferred from the enclosed mass within 8 kpc (top panel) and within 20 kpc (bottom panel). The blue shaded region corresponds to modelling the halo as an NFW profile. The red shaded region corresponds to modelling the halo as an NFW profile that has been contracted by the MW baryonic distribution - in this case the concentration corresponds to the original (uncontracted) halo. The dark and lighter colours show the 68 and 95 percentile confidence regions, respectively. For clarity, for the NFW case in the bottom panel, we show only the 68 percentile confidence region. The vertical dashed line and the associated grey region show the Callingham et al. (2019) MW DM halo mass estimate and its 68 percentile confidence region. The approximately horizontal dashed line and its associated grey region show the median and standard deviation of the halo mass-concentration relation (Hellwing et al. 2016).From the PDF
Figure 9 Constraints on the mass and concentration of the MW DM halo inferred from the escape velocity measurement of Deason et al. (2019a). The blue shaded region shows the 68 percentile confidence region when modelling the halo as an NFW profile. The red shaded regions show the 68 and 95 percentile contours when taking into account the contraction of the Galactic DM halo - in this case the concentration corresponds to the value before applying the baryonic contraction. The dashed lines and grey shaded regions are as in Figure 8.
Figure 9 Constraints on the mass and concentration of the MW DM halo inferred from the escape velocity measurement of Deason et al. (2019a). The blue shaded region shows the 68 percentile confidence region when modelling the halo as an NFW profile. The red shaded regions show the 68 and 95 percentile contours when taking into account the contraction of the Galactic DM halo - in this case the concentration corresponds to the value before applying the baryonic contraction. The dashed lines and grey shaded regions are as in Figure 8.From the PDF
Figure 10 Top panel: MW Galactic rotation curve (symbols with error bars) as a function of radial distance. The solid red line is the best fitting MW mass model assuming a contracted DM NFW halo. The dashed blue line the best fitting MW mass model assuming no contraction, i.e. that the DMhalo follows an NFW profile. Both models were fitted only to the Eilers et al. (2019) and the Callingham et al. (2019) data points. Bottom panel: The difference between the data and the best fitting contracted halo model. The dashed blue line shows the difference between the NFW halo model and the contracted halo one. The two models give the same rotation curve to within 1 km s -1 or less in the range 5 kpc < r < 60 kpc .
Figure 10 Top panel: MW Galactic rotation curve (symbols with error bars) as a function of radial distance. The solid red line is the best fitting MW mass model assuming a contracted DM NFW halo. The dashed blue line the best fitting MW mass model assuming no contraction, i.e. that the DMhalo follows an NFW profile. Both models were fitted only to the Eilers et al. (2019) and the Callingham et al. (2019) data points. Bottom panel: The difference between the data and the best fitting contracted halo model. The dashed blue line shows the difference between the NFW halo model and the contracted halo one. The two models give the same rotation curve to within 1 km s -1 or less in the range 5 kpc < r < 60 kpc .From the PDF
Figure 11 The rotation curve of the best fitting MW contracted NFW halo model separated into contributions from individual components. The solid lines show the maximum likelihood model and the shaded region the 68 percentile confidence regions. The symbols with error bars show the Bovy &Rix (2013) determination of the stellar disc and DM halo of the MW.
Figure 11 The rotation curve of the best fitting MW contracted NFW halo model separated into contributions from individual components. The solid lines show the maximum likelihood model and the shaded region the 68 percentile confidence regions. The symbols with error bars show the Bovy &Rix (2013) determination of the stellar disc and DM halo of the MW.From the PDF
Figure 12 Posterior distributions pf the seven parameters of the MW mass model. The red shaded regions correspond to the contracted NFW halo model while the blue shaded regions correspond to a pure NFW halo. The darker and lighter contours enclose the 68 and 95 percentiles of the total probability respectively. The stellar masses are given in units of 10 10 M ⊙ and the disc scale lengths in kiloparsecs. For convenience, the ML values as well as the 68 percentile ranges are quoted in the top-right corner of the plot as well as in Table 2. The grey dotted lines in the last three diagonal panels show the priors for the bulge mass, and the thin and thick disc scale lengths.
Figure 12 Posterior distributions pf the seven parameters of the MW mass model. The red shaded regions correspond to the contracted NFW halo model while the blue shaded regions correspond to a pure NFW halo. The darker and lighter contours enclose the 68 and 95 percentiles of the total probability respectively. The stellar masses are given in units of 10 10 M ⊙ and the disc scale lengths in kiloparsecs. For convenience, the ML values as well as the 68 percentile ranges are quoted in the top-right corner of the plot as well as in Table 2. The grey dotted lines in the last three diagonal panels show the priors for the bulge mass, and the thin and thick disc scale lengths.From the PDF
Figure 13 Examples of observables that may be used to constrain the description of the Galactic DM halo as either a contracted NFW or a pure NFW profile. The solid red and blue dashed lines show the marginalised probabilities of the observables inferred from fitting the MW rotation curve with contracted and pure NFW profiles, respectively. The three panels show: disc stellar mass (top), baryonic surface density within 1 . 1 kpc from the disc at the Solar position (middle), and escape velocity at the Solar position (bottom). The diamonds with horizontal error bars show recent measurements and their 68% confidence limits: Bland-Hawthorn & Gerhard (2016) estimate of disc stellar mass based on a compilation of studies, Read (2014) and McKee et al. (2015) estimates of the baryonic density at the Sun's position, and the recent escape velocity measurement of Deason et al. (2019a) and the updated value of Grand et al. (2019b).
Figure 13 Examples of observables that may be used to constrain the description of the Galactic DM halo as either a contracted NFW or a pure NFW profile. The solid red and blue dashed lines show the marginalised probabilities of the observables inferred from fitting the MW rotation curve with contracted and pure NFW profiles, respectively. The three panels show: disc stellar mass (top), baryonic surface density within 1 . 1 kpc from the disc at the Solar position (middle), and escape velocity at the Solar position (bottom). The diamonds with horizontal error bars show recent measurements and their 68% confidence limits: Bland-Hawthorn & Gerhard (2016) estimate of disc stellar mass based on a compilation of studies, Read (2014) and McKee et al. (2015) estimates of the baryonic density at the Sun's position, and the recent escape velocity measurement of Deason et al. (2019a) and the updated value of Grand et al. (2019b).From the PDF
Figure 14 The DM density at the position of the Sun derived when modelling the Galactic DM halo as a contracted (solid red) or as a pure NFW halo (blue dashed). Modelling the MW as the contracted halo results in a 10% higher DM density that in the pure NFW halo case.
Figure 14 The DM density at the position of the Sun derived when modelling the Galactic DM halo as a contracted (solid red) or as a pure NFW halo (blue dashed). Modelling the MW as the contracted halo results in a 10% higher DM density that in the pure NFW halo case.From the PDF
Figure B1. The marginalised PDF for the seven parameters used to describe the MW mass profile. Here we show the effect of adding model uncertainties to obtain a global fit with a reduced χ 2 , close to unity. All approaches that include a model uncertainty (green and black curves) give roughly the same PDFs. The purple curve corresponds to finding the best fitting model in the absence of model uncertainties, i.e. using only the Eilers et al. (2019) observational errors. In this case, the best fit model has a reduced χ 2 ≃ 2 . To obtain best fits with reduced χ 2 ≃ 1 , we add model uncertainties in two ways: i) by adding in quadrature a constant error of 1 . 2 km s -1 to each data point (green curve), and ii) by adding in quadrature an uncertainty of 0 . 21 σ sys (black curve; this is the default approach used in our analysis), where σ sys is the systematic error associated with the Eilers et al. rotation curve.
Figure B1. The marginalised PDF for the seven parameters used to describe the MW mass profile. Here we show the effect of adding model uncertainties to obtain a global fit with a reduced χ 2 , close to unity. All approaches that include a model uncertainty (green and black curves) give roughly the same PDFs. The purple curve corresponds to finding the best fitting model in the absence of model uncertainties, i.e. using only the Eilers et al. (2019) observational errors. In this case, the best fit model has a reduced χ 2 ≃ 2 . To obtain best fits with reduced χ 2 ≃ 1 , we add model uncertainties in two ways: i) by adding in quadrature a constant error of 1 . 2 km s -1 to each data point (green curve), and ii) by adding in quadrature an uncertainty of 0 . 21 σ sys (black curve; this is the default approach used in our analysis), where σ sys is the systematic error associated with the Eilers et al. rotation curve.From the PDF

Verification

Claims the paper makes

54 Valid · 3 Not valid · 18 Not checked · 185 Own results and interpretations

162 more claims · 21 with their cited sources checked

Create a free account to see all 260 claims and to verify the 8 references still open.

See all claims — free account
  • It may state two separate claims as one. 82
  • Probably not a substantial claim. 23
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

  • <tt>emcee</tt>: The MCMC Hammer

    Foreman-Mackey, D., Hogg, D. W., Lang, D., & Goodman, J. (2013) · Publications of the Astronomical Society of the Pacific · doi:10.1086/670067 · Cited by 12,414 · cited 1×

    “confidence intervals we employ a Markov Chain Monte Carlo approach using the EMCEE python module (Foreman-Mackey et al. 2013).”
    Method
  • A Universal Density Profile from Hierarchical Clustering

    Navarro, J. F., Frenk, C. S., & White, S. D. M. (1997) · The Astrophysical Journal · doi:10.1086/304888 · Cited by 9,917 · cited 2×

    “We proceed by fitting an NFW profile (Navarro et al. 1996, 1997) given by: ρ(r) = ρ0 r(r +Rs)2 (7) ≡ M200 4πR3200 c3 ln(1 + c)− c 1+c 1 r(r + R200 c )2 , (8) where ρ0 is the characteristic density, Rs = R200/c is the scale radius and c is the halo concentration.”
    BackgroundMethodSelf-citation
  • SEVEN-YEAR WILKINSON MICROWAVE ANISOTROPY PROBE(WMAP) OBSERVATIONS: COSMOLOGICAL INTERPRETATION

    Komatsu, E., Smith, K. M., Dunkley, J., Bennett, C. L., Gold, B., Hinshaw, G., Jarosik, N., Larson, D., Nolta, M. R., Page, L., et al. (2011) · The Astrophysical Journal Supplement Series · doi:10.1088/0067-0049/192/2/18 · Cited by 8,802 · cited 1×

    “The APOSTLE project assumes the WMAP7 cosmology (Komatsu et al. 2011), with parameters: Ωm = 0.272, Ωb = 0.045, ΩΛ = 0.728 and h = 0.704.”
    MethodInfluential
  • The Structure of Cold Dark Matter Halos

    Navarro, J. F., Frenk, C. S., & White, S. D. M. (1996) · The Astrophysical Journal · doi:10.1086/177173 · Cited by 8,544 · cited 2×

    “We proceed by fitting an NFW profile (Navarro et al. 1996, 1997) given by: ρ(r) = ρ0 r(r +Rs)2 (7) ≡ M200 4πR3200 c3 ln(1 + c)− c 1+c 1 r(r + R200 c )2 , (8) where ρ0 is the characteristic density, Rs = R200/c is the scale radius and c is the halo concentration.”
    BackgroundMethodSelf-citation
  • Gaia Data Release 2: Summary of the contents and survey properties

    Gaia Collaboration, Brown, A. G. A., Vallenari, A., Prusti, T., de Bruijne, J. H. J., Babusiaux, C., Bailer-Jones, C. A. L., Biermann, M., Evans, D. W., Eyer, L., et al. (2018) · Astronomy & Astrophysics · doi:10.1051/0004-6361/201833051 · Cited by 8,442

  • The cosmological simulation code gadget-2

    Springel, V. (2005) · Monthly Notices of the Royal Astronomical Society · doi:10.1111/j.1365-2966.2005.09655.x · Cited by 6,368 · cited 1×

    “The APOSTLE simulations were run with a modified version of the Gadget 3 code (Springel 2005) with the reference EAGLE galaxy formation models (Schaye et al. 2015; Crain et al. 2015), which were calibrated to reproduce the galaxy mass function, galaxy sizes and the relation between black hole mass…”
    Method
  • A Universal Density Profile from Hierarchical ClusteringPreprint

    Navarro, J. F., Frenk, C. S., & White, S. D. M. (1996) · Cited by 6,275

    Self-citation
  • The cosmological simulation code GADGET-2

    Petkova, M., & Springel, V. (2005) · Cited by 3,918

  • The EAGLE project: simulating the evolution and assembly of galaxies and their environments

    Schaye, J., Crain, R. A., Bower, R. G., Furlong, M., Schaller, M., Theuns, T., Dalla Vecchia, C., Frenk, C. S., McCarthy, I. G., Helly, J. C., et al. (2015) · Monthly Notices of the Royal Astronomical Society · doi:10.1093/mnras/stu2058 · Cited by 3,601 · cited 23×

    “Our final sample consist of 33 medium-resolution and 5 high-resolution Auriga haloes, 16 medium-resolution and 6 high-resolution APOSTLE haloes, and 27 EAGLE_recal haloes.”
    BackgroundMethodInfluentialSelf-citation
  • The evolution of large-scale structure in a universe dominated by cold dark matter

    Davis, M., Efstathiou, G., Frenk, C. S., & White, S. D. M. (1985) · The Astrophysical Journal · doi:10.1086/163168 · Cited by 3,391 · cited 1×

    “In all the simulations, haloes are identified using the FOF algorithm (Davis et al. 1985) with a linking length 0.2 times the mean particle separation and further split into gravitationally bound substructures using the SUBFIND code (Springel et al. 2001).”
    MethodInfluentialSelf-citation

Show all 204 references

Research works printed but not linked: 1

  1. Monachesi, 2019, MNRAS, 485, 2589, 10.1093/mnras/stz538 · DOI · Paper page

Cited by

See all 332

Metadata

Authors
Cautun, M., Benítez-Llambay, A., Deason, A. J., Frenk, C. S., Fattahi, A., Gómez, F. A., Grand, R. J. J., Oman, K. A., Navarro, J. F., & Simpson, C. M.
Affiliations
  • Leiden University (NL)
  • Durham University (GB)
  • University of La Serena (CL)
  • Max Planck Institute for Astrophysics (DE)
  • University of Victoria (CA)
  • University of Chicago (US)
Corresponding author
Cautun, Marius
Venue
Monthly Notices of the Royal Astronomical Society
Published
2020-04-17
Volume
494
Issue
3
Pages
4291-4313
ISSN
  • 0035-8711 (ISSN-L)
  • 1365-2966
OpenAlex
W2988879082
Cited by
332
References
204
Citations by year
2026: 26 · 2025: 52 · 2024: 53 · 2023: 55 · 2022: 53 · 2021: 57 · 2020: 35
FWCI
22.39
Type
journal article
Language
en
Open access
Locations
  • Monthly Notices of the Royal Astronomical Society (publishedVersion)
  • arXiv (Cornell University) (acceptedVersion)
  • Durham Research Online (Durham University) (acceptedVersion)
  • Liverpool John Moores University (acceptedVersion)
  • Leiden Repository (Leiden University) (submittedVersion)
  • Durham Research Online (Durham University) (submittedVersion, cc-by)
  • Data Archiving and Networked Services (DANS) (submittedVersion, other-oa)
  • BOA (University of Milano-Bicocca) (submittedVersion)
  • MPG.PuRe (Max Planck Society) (submittedVersion)
  • arXiv (Cornell University)
Funders
  • Marie Skłodowska-Curie (794474)
  • Science and Technology Facilities Council (ST/I00162X/1, ST/P000541/1, ST/K00042X/1, ST/P002293/1, ST/R002371/1, ST/S002502/1, ST/R000832/1)
  • ERC (DMIDAS [GA 786910])
  • Royal Society
  • CONICYT (1181264)
Topics
  • Physical Sciences › Physics and Astronomy › Astronomy and Astrophysics › Galaxies: Formation, Evolution, Phenomena
  • Physical Sciences › Physics and Astronomy › Astronomy and Astrophysics › Stellar, planetary, and galactic studies
  • Physical Sciences › Physics and Astronomy › Nuclear and High Energy Physics › Dark Matter and Cosmic Phenomena
Keywords
dark matter halos, galaxy rotation curves, stellar mass, fluid simulation, Gaia DR2, halo bias, halo concentration-mass relation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The milky way total mass profile as inferred from Gaia DR2. https://app.cochat.ai/papers/10.1093/mnras/staa1017
The paper
Cautun, M., Benítez-Llambay, A., Deason, A. J., Frenk, C. S., Fattahi, A., Gómez, F. A., Grand, R. J. J., Oman, K. A., Navarro, J. F., & Simpson, C. M. (2020). The milky way total mass profile as inferred from Gaia DR2. Monthly Notices of the Royal Astronomical Society. https://doi.org/10.1093/mnras/staa1017

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.