The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Lattice Thermal Conductivity of Disordered Semiconductor Alloys at High Temperatures
Abstract
The high-temperature thermal conductivity of a disordered semiconductor alloy is derived using the Klemens-Callaway theory. It is assumed that the reciprocal relaxation times depend on frequency $\ensuremath{\omega}$ as ${\ensuremath{\omega}}^{4}$ for strain and mass point defects and as ${\ensuremath{\omega}}^{2}$ for normal and umklapp three-phonon anharmonic processes. The thermal conductivity is expressed in terms of the lattice parameters and mean atomic weights of the alloy and its constituents. Agreement is obtained between theory and published experimental data on Ge-Si alloys at temperatures 300-1200\ifmmode^\circ\else\textdegree\fi{}K, and on (Ga,In)As alloys at 300\ifmmode^\circ\else\textdegree\fi{}K, using the value 2.5 for the ratio of umklapp to normal relaxation times. It is found that the large thermal resistivity of Ge-Si alloys is predominantly due to mass defect scattering, whereas that of (Ga,In)As alloys is mainly due to strain scattering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Model for Lattice Thermal Conductivity at Low Temperatures
Callaway, J. (1959) · Physical Review · doi:10.1103/physrev.113.1046 · Cited by 3,218
The Scattering of Low-Frequency Lattice Waves by Static Imperfections
Klemens, P. G. (1955) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/68/12/303 · Cited by 1,457
Effect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
Thermal Resistance due to Point Defects at High Temperatures
Klemens, P. G. (1960) · Physical Review · doi:10.1103/physrev.119.507 · Cited by 714
Theory of Thermal Conductivity of Solids at Low Temperatures
Carruthers, P. (1961) · Reviews of Modern Physics · doi:10.1103/revmodphys.33.92 · Cited by 693
Role of Low-Energy Phonons in Thermal Conduction
Herring, C. (1954) · Physical Review · doi:10.1103/physrev.95.954 · Cited by 545
The thermal conductivity of dielectric solids at low temperatures (Theoretical)
Klemens, P. G. (1951) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1951.0147 · Cited by 485
Lattice Vibrations in Silicon and Germanium
Brockhouse, B. N. (1959) · Physical Review Letters · doi:10.1103/physrevlett.2.256 · Cited by 350
Normal Modes of Germanium by Neutron Spectrometry
Brockhouse, B. N., & Iyengar, P. K. (1958) · Physical Review · doi:10.1103/physrev.111.747 · Cited by 303
Thermal Conductivity of Ge-Si Alloys at High Temperatures
Abeles, B., Beers, D. S., Cody, G. D., & Dismukes, J. P. (1962) · Physical Review · doi:10.1103/physrev.125.44 · Cited by 209
Self-citation
Cited by
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
GaAs, AlAs, and Al x Ga1−x As: Material parameters for use in research and device applications
Adachi, S. (1985) · Journal of Applied Physics · doi:10.1063/1.336070 · Cited by 3,289
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Kim, S. I., Lee, K. H., Mun, H. A., Kim, H. S., Hwang, S. W., Roh, J. W., Yang, D. J., Shin, W. H., Li, X. S., Lee, Y. H., et al. (2015) · Science · doi:10.1126/science.aaa4166 · Cited by 2,084
Band Engineering of Thermoelectric Materials
Pei, Y., Wang, H., & Snyder, G. J. (2012) · Advanced Materials · doi:10.1002/adma.201202919 · Cited by 1,793
Materials selection guidelines for low thermal conductivity thermal barrier coatings
Clarke, D. R. (2003) · Surface and Coatings Technology · doi:10.1016/s0257-8972(02)00593-5 · Cited by 1,496
Analysis of Lattice Thermal Conductivity
Holland, M. G. (1963) · Physical Review · doi:10.1103/physrev.132.2461 · Cited by 1,160
Enhanced Thermoelectric Figure-of-Merit in Nanostructured p-type Silicon Germanium Bulk Alloys
Joshi, G., Lee, H., Lan, Y., Wang, X., Zhu, G., Wang, D., Gould, R. W., Cuff, D. C., Tang, M. Y., Dresselhaus, M. S., et al. (2008) · Nano Letters · doi:10.1021/nl8026795 · Cited by 1,119
The intrinsic thermal conductivity of AIN
Slack, G. A., Tanzilli, R. A., Pohl, R. O., & Vandersande, J. W. (1987) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(87)90153-3 · Cited by 1,009
Thermal conductivity of isotopically modified graphene
Chen, S., Wu, Q., Mishra, C., Kang, J., Zhang, H., Cho, K., Cai, W., Balandin, A. A., & Ruoff, R. S. (2012) · Nature Materials · doi:10.1038/nmat3207 · Cited by 980
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Enhancement of Thermoelectric Figure‐of‐Merit by a Bulk Nanostructuring Approach
Lan, Y., Minnich, A. J., Chen, G., & Ren, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901512 · Cited by 903
Thinking Like a Chemist: Intuition in Thermoelectric Materials
Zeier, W. G., Zevalkink, A., Gibbs, Z. M., Hautier, G., Kanatzidis, M. G., & Snyder, G. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201508381 · Cited by 882
Kim, W., Zide, J., Gossard, A., Klenov, D., Stemmer, S., Shakouri, A., & Majumdar, A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.045901 · Cited by 864
Review of high entropy ceramics: design, synthesis, structure and properties
Zhang, R.-Z., & Reece, M. J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05698j · Cited by 760
Tan, G., Zhao, L.-D., Shi, F., Doak, J. W., Lo, S.-H., Sun, H., Wolverton, C., Dravid, V. P., Uher, C., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500860m · Cited by 706
Zintl Chemistry for Designing High Efficiency Thermoelectric Materials
Toberer, E. S., May, A. F., & Snyder, G. J. (2010) · Chemistry of Materials · doi:10.1021/cm901956r · Cited by 683
Coherent Phonon Heat Conduction in Superlattices
Luckyanova, M. N., Garg, J., Esfarjani, K., Jandl, A., Bulsara, M. T., Schmidt, A. J., Minnich, A. J., Chen, S., Dresselhaus, M. S., Ren, Z., et al. (2012) · Science · doi:10.1126/science.1225549 · Cited by 630
Morelli, D. T., Heremans, J. P., & Slack, G. A. (2002) · Physical Review B · doi:10.1103/physrevb.66.195304 · Cited by 628
Thermal conductivity of bulk and nanowire Mg2SixSn1−xalloys from first principles
Li, W., Lindsay, L., Broido, D. A., Stewart, D. A., & Mingo, N. (2012) · Physical Review B · doi:10.1103/physrevb.86.174307 · Cited by 616
High-performance SnSe thermoelectric materials: Progress and future challenge
Chen, Z.-G., Shi, X., Zhao, L.-D., & Zou, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.04.005 · Cited by 597
Mao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Phonon conduction in PbSe, PbTe, and PbTe1−xSexfrom first-principles calculations
Tian, Z., Garg, J., Esfarjani, K., Shiga, T., Shiomi, J., & Chen, G. (2012) · Physical Review B · doi:10.1103/physrevb.85.184303 · Cited by 579
MAHAN, G. D. (1998) · Solid State Physics · doi:10.1016/s0081-1947(08)60190-3 · Cited by 541
Recent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Defect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Thermal transport in polymeric materials and across composite interfaces
Mehra, N., Mu, L., Ji, T., Yang, X., Kong, J., Gu, J., & Zhu, J. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.04.004 · Cited by 453
“Nanoparticle-in-Alloy” Approach to Efficient Thermoelectrics: Silicides in SiGe
Mingo, N., Hauser, D., Kobayashi, N. P., Plissonnier, M., & Shakouri, A. (2009) · Nano Letters · doi:10.1021/nl8031982 · Cited by 405
Lee, S., Yang, F., Suh, J., Yang, S., Lee, Y., Li, G., Sung Choe, H., Suslu, A., Chen, Y., Ko, C., et al. (2015) · Nature Communications · doi:10.1038/ncomms9573 · Cited by 385
The maximum possible conversion efficiency of silicon-germanium thermoelectric generators
Slack, G. A., & Hussain, M. A. (1991) · Journal of Applied Physics · doi:10.1063/1.349385 · Cited by 382
Pernot, G., Stoffel, M., Savic, I., Pezzoli, F., Chen, P., Savelli, G., Jacquot, A., Schumann, J., Denker, U., Mönch, I., et al. (2010) · Nature Materials · doi:10.1038/nmat2752 · Cited by 375
Defect engineering in development of low thermal conductivity materials: A review
Zhao, M., Pan, W., Wan, C., Qu, Z., Li, Z., & Yang, J. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.07.036 · Cited by 374
Strategies for engineering phonon transport in thermoelectrics
Kim, W. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01670c · Cited by 348
Thermal conductivity and localization in glasses: Numerical study of a model of amorphous silicon
Feldman, J. L., Kluge, M. D., Allen, P. B., & Wooten, F. (1993) · Physical Review B · doi:10.1103/physrevb.48.12589 · Cited by 346
Chapter 5 Skutterudites: Prospective novel thermoelectrics
Uher, C. (2001) · Semiconductors and Semimetals · doi:10.1016/s0080-8784(01)80151-4 · Cited by 336
Advances in Thermal Conductivity
Toberer, E. S., Baranowski, L. L., & Dames, C. (2012) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070511-155040 · Cited by 334
Multifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202305453 · Cited by 326
Hanus, R., Agne, M. T., Rettie, A. J. E., Chen, Z., Tan, G., Chung, D. Y., Kanatzidis, M. G., Pei, Y., Voorhees, P. W., & Snyder, G. J. (2019) · Advanced Materials · doi:10.1002/adma.201900108 · Cited by 311
Studies on the Bi2Te3–Bi2Se3–Bi2S3system for mid-temperature thermoelectric energy conversion
Liu, W., Lukas, K. C., McEnaney, K., Lee, S., Zhang, Q., Opeil, C. P., Chen, G., & Ren, Z. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23549h · Cited by 310
Interstitial Point Defect Scattering Contributing to High Thermoelectric Performance in SnTe
Pei, Y., Zheng, L., Li, W., Lin, S., Chen, Z., Wang, Y., Xu, X., Yu, H., Chen, Y., & Ge, B. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600019 · Cited by 306
Hopkins, P. E. (2013) · ISRN Mechanical Engineering · doi:10.1155/2013/682586 · Cited by 302
Thermal conductivity of silicon, germanium, III–V compounds and III–V alloys
Maycock, P. D. (1967) · Solid-State Electronics · doi:10.1016/0038-1101(67)90069-x · Cited by 301
Achieving high power factor and output power density in p-type half-Heuslers Nb 1-x Ti x FeSb
He, R., Kraemer, D., Mao, J., Zeng, L., Jie, Q., Lan, Y., Li, C., Shuai, J., Kim, H. S., Liu, Y., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1617663113 · Cited by 300
Thermal properties of AlAs/GaAs superlattices
Yao, T. (1987) · Applied Physics Letters · doi:10.1063/1.98526 · Cited by 290
High Thermoelectric Figure of Merit in PbTe Alloys Demonstrated in PbTe–CdTe
Pei, Y., LaLonde, A. D., Heinz, N. A., & Snyder, G. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100770 · Cited by 289
Thermal Conductivity of GaAs and GaAs1− x P x Laser Semiconductors
Carlson, R. O., Slack, G. A., & Silverman, S. J. (1965) · Journal of Applied Physics · doi:10.1063/1.1714018 · Cited by 166
Thermal conductivity of isotopically pure and Ge-doped Si epitaxial layers from 300 to 550 K
Cahill, D. G., & Watanabe, F. (2004) · Physical Review B · doi:10.1103/physrevb.70.235322 · Cited by 89
Ahadi, M., Andisheh-Tadbir, M., Tam, M., & Bahrami, M. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.01.037 · Cited by 76
Thermal conductivity of epitaxial layers of dilute SiGe alloys
Cahill, D. G., Watanabe, F., Rockett, A., & Vining, C. B. (2005) · Physical Review B · doi:10.1103/physrevb.71.235202 · Cited by 67
Regner, K. T., Wei, L. C., & Malen, J. A. (2015) · Journal of Applied Physics · doi:10.1063/1.4937995 · Cited by 26
Mitterhuber, L., Kosednar-Legenstein, B., Vohra, A., Borga, M., Posthuma, N., & Kraker, E. (2024) · Journal of Applied Physics · doi:10.1063/5.0207513 · Cited by 11
Metadata
- Authors
- Abeles, B.
- Venue
- Physical Review
- Publisher
- American Physical Society (APS)
- Published
- 1963-09-01
- Volume
- 131
- Issue
- 5
- Pages
- 1906-1911
- ISSN
- 0031-899X (ISSN-L)
- OpenAlex
- W2071548685
- Cited by
- 1,148
- References
- 16
- FWCI
- 9.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.