The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
n-type doping ofCuInSe2andCuGaSe2
Abstract
The efficiency of $\mathrm{CuIn}{\mathrm{Se}}_{2}$ based solar cell devices could improve significantly if $\mathrm{CuGa}{\mathrm{Se}}_{2}$, a wider band gap chalcopyrite semiconductor, could be added to the $\mathrm{CuIn}{\mathrm{Se}}_{2}$ absorber layer. This is, however, limited by the difficulty of doping $n$-type $\mathrm{CuGa}{\mathrm{Se}}_{2}$ and, hence, in its alloys with ${\mathrm{CuInSe}}_{2}$. Indeed, wider-gap members of semiconductor series are often more difficult to dope than lower-gap members of the same series. We find that in chalcopyrites, there are three critical values of the Fermi energy ${E}_{F}$ that control $n$-type doping: (i) ${E}_{F}^{n,\mathrm{pin}}$ is the value of ${E}_{F}$ where the energy to form Cu vacancies is zero. At this point, the spontaneously formed vacancies ($=$acceptors) kill all electrons. (ii) ${E}_{F}^{n,\mathrm{comp}}$ is the value of ${E}_{F}$ where the energy to form a Cu vacancy equals the energy to form an $n$-type dopant, e.g., ${\mathrm{Cd}}_{\mathrm{Cu}}$. (iii) ${E}_{F}^{n,\text{site}}$ is the value of ${E}_{F}$ where the formation of Cd-on-In is equal to the formation of Cd-on-Cu. For good $n$-type doping, ${E}_{F}^{n,\mathrm{pin}}$, ${E}_{F}^{n,\mathrm{comp}}$, and ${E}_{F}^{n,\text{site}}$ need to be as high as possible in the gap. We find that these quantities are higher in the gap in $\mathrm{CuIn}{\mathrm{Se}}_{2}$ than in $\mathrm{CuGa}{\mathrm{Se}}_{2}$, so the latter is difficult to dope $n$-type. In this work, we calculate all three critical Fermi energies and study theoretically the best growth condition for $n$-type $\mathrm{CuIn}{\mathrm{Se}}_{2}$ and $\mathrm{CuGa}{\mathrm{Se}}_{2}$ with possible cation and anion doping. We find that the intrinsic defects such as ${\mathrm{V}}_{\mathrm{Cu}}$ and ${\mathrm{In}}_{\mathrm{Cu}}$ or ${\mathrm{Ga}}_{\mathrm{Cu}}$ play significant roles in doping in both chalcopyrites. For group-II cation (Cd, Zn, or Mg) doping, the best $n$-type growth condition is $\mathrm{In}∕\mathrm{Ga}$-rich, and maximal Se-poor, which is also the optimal condition for stabilizing the intrinsic ${\mathrm{In}}_{\mathrm{Cu}}∕{\mathrm{Ga}}_{\mathrm{Cu}}$ donors. Bulk $\mathrm{CuIn}{\mathrm{Se}}_{2}$ can be doped at equilibrium $n$-type, but bulk $\mathrm{CuGa}{\mathrm{Se}}_{2}$ cannot be due to the low formation energy of intrinsic Cu-vacancy. For halogen anion doping, the best $n$-type materials growth is still under $\mathrm{In}∕\mathrm{Ga}$-rich, and maximal Se-poor conditions. These conditions are not best for halogen substitutional defects, but are optimal for intrinsic ${\mathrm{In}}_{\mathrm{Cu}}∕{\mathrm{Ga}}_{\mathrm{Cu}}$ donors. Again, $\mathrm{CuGa}{\mathrm{Se}}_{2}$ cannot be doped $n$-type by halogen doping, while $\mathrm{CuIn}{\mathrm{Se}}_{2}$ can.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Self-interaction correction to density-functional approximations for many-electron systems
Perdew, J. P., & Zunger, A. (1981) · Physical Review B · doi:10.1103/physrevb.23.5048 · Cited by 20,887
Self-citationPeriodic boundary conditions in ab initio calculations
Makov, G., & Payne, M. C. (1995) · Physical Review B · doi:10.1103/physrevb.51.4014 · Cited by 2,994
Chemical potential dependence of defect formation energies in GaAs: Application to Ga self-diffusion
Zhang, S., & Northrup, J. (1991) · Physical Review Letters · doi:10.1103/physrevlett.67.2339 · Cited by 1,791
Momentum-space formalism for the total energy of solids
Ihm, J., Zunger, A., & Cohen, M. L. (1979) · Journal of Physics C: Solid State Physics · doi:10.1088/0022-3719/12/21/009 · Cited by 1,466
Self-citationDefect physics of theCuInSe2chalcopyrite semiconductor
Zhang, S. B., Wei, S.-H., Zunger, A., & Katayama-Yoshida, H. (1998) · Physical Review B · doi:10.1103/physrevb.57.9642 · Cited by 1,407
Self-citationTheory of the band-gap anomaly inABC2chalcopyrite semiconductors
Jaffe, J. E., & Zunger, A. (1984) · Physical Review B · doi:10.1103/physrevb.29.1882 · Cited by 972
Self-citationLey, L., Pollak, R. A., McFeely, F. R., Kowalczyk, S. P., & Shirley, D. A. (1974) · Physical review. B, Solid state · doi:10.1103/physrevb.9.600 · Cited by 847
High-efficiency CuIn x Ga1−x Se2 solar cells made from (In x,Ga1−x)2Se3 precursor films
Gabor, A. M., Tuttle, J. R., Albin, D. S., Contreras, M. A., Noufi, R., & Hermann, A. M. (1994) · Applied Physics Letters · doi:10.1063/1.112670 · Cited by 619
Cited by
First-principles calculations for point defects in solids
Freysoldt, C., Grabowski, B., Hickel, T., Neugebauer, J., Kresse, G., Janotti, A., & Van de Walle, C. G. (2014) · Reviews of Modern Physics · doi:10.1103/revmodphys.86.253 · Cited by 3,037
Lany, S., & Zunger, A. (2008) · Physical Review B · doi:10.1103/physrevb.78.235104 · Cited by 1,257
Self-citationDefect energetics in ZnO: A hybrid Hartree-Fock density functional study
Oba, F., Togo, A., Tanaka, I., Paier, J., & Kresse, G. (2008) · Physical Review B · doi:10.1103/physrevb.77.245202 · Cited by 744
Intrinsic point defects and complexes in the quaternary kesterite semiconductorCu2ZnSnS4
Chen, S., Yang, J.-H., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.81.245204 · Cited by 740
Anion vacancies as a source of persistent photoconductivity in II-VI and chalcopyrite semiconductors
Lany, S., & Zunger, A. (2005) · Physical Review B · doi:10.1103/physrevb.72.035215 · Cited by 650
Self-citationDopability, Intrinsic Conductivity, and Nonstoichiometry of Transparent Conducting Oxides
Lany, S., & Zunger, A. (2007) · Physical Review Letters · doi:10.1103/physrevlett.98.045501 · Cited by 640
Self-citationMaughan, A. E., Ganose, A. M., Bordelon, M. M., Miller, E. M., Scanlon, D. O., & Neilson, J. R. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03207 · Cited by 626
Origins of thep-type nature and cation deficiency inCu2Oand related materials
Raebiger, H., Lany, S., & Zunger, A. (2007) · Physical Review B · doi:10.1103/physrevb.76.045209 · Cited by 542
Self-citationErhart, P., Albe, K., & Klein, A. (2006) · Physical Review B · doi:10.1103/physrevb.73.205203 · Cited by 539
Electrostatics-based finite-size corrections for first-principles point defect calculations
Kumagai, Y., & Oba, F. (2014) · Physical Review B · doi:10.1103/physrevb.89.195205 · Cited by 526
Chen, S., Walsh, A., Yang, J.-H., Gong, X. G., Sun, L., Yang, P.-X., Chu, J.-H., & Wei, S.-H. (2011) · Physical Review B · doi:10.1103/physrevb.83.125201 · Cited by 473
Cu–In Halide Perovskite Solar Absorbers
Zhao, X.-G., Yang, D., Sun, Y., Li, T., Zhang, L., Yu, L., & Zunger, A. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02120 · Cited by 428
Self-citationAccurate prediction of defect properties in density functional supercell calculations
Lany, S., & Zunger, A. (2009) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/8/084002 · Cited by 401
Self-citationPoint defects in ZnO: an approach from first principles
Oba, F., Choi, M., Togo, A., & Tanaka, I. (2011) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/12/3/034302 · Cited by 392
Yuan, Z., Chen, S., Xiang, H., Gong, X., Walsh, A., Park, J., Repins, I., & Wei, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502272 · Cited by 370
Lany, S., & Zunger, A. (2006) · Journal of Applied Physics · doi:10.1063/1.2388256 · Cited by 356
Self-citationControlling Bulk Conductivity in Topological Insulators: Key Role of Anti‐Site Defects
Scanlon, D. O., King, P. D. C., Singh, R. P., de la Torre, A., Walker, S. M., Balakrishnan, G., Baumberger, F., & Catlow, C. R. A. (2012) · Advanced Materials · doi:10.1002/adma.201200187 · Cited by 307
Defect levels through hybrid density functionals: Insights and applications
Alkauskas, A., Broqvist, P., & Pasquarello, A. (2011) · physica status solidi (b) · doi:10.1002/pssb.201046195 · Cited by 300
Charge self-regulation upon changing the oxidation state of transition metals in insulators
Raebiger, H., Lany, S., & Zunger, A. (2008) · Nature · doi:10.1038/nature07009 · Cited by 276
Self-citation
Metadata
- Authors
- Persson, C., Zhao, Y.-J., Lany, S., & Zunger, A.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 2005-07-14
- Volume
- 72
- Issue
- 3
- ISSN
- 1098-0121 (ISSN-L)
- 1550-235X
- OpenAlex
- W2067648367
- Cited by
- 475
- References
- 12
- FWCI
- 12.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.