Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
With the developments and applications of the new information technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, a smart manufacturing era is coming. At the same time, various national manufacturing development strategies have been put forward, such as Industry 4.0, Industrial Internet, manufacturing based on Cyber-Physical System, and Made in China 2025. However, one of specific challenges to achieve smart manufacturing with these strategies is how to converge the manufacturing physical world and the virtual world, so as to realize a series of smart operations in the manufacturing process, including smart interconnection, smart interaction, smart control and management, etc. In this context, as a basic unit of manufacturing, shop-floor is required to reach the interaction and convergence between physical and virtual spaces, which is not only the imperative demand of smart manufacturing, but also the evolving trend of itself. Accordingly, a novel concept of digital twin shopfloor (DTS) based on digital twin is explored and its four key components are discussed, including physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor digital twin data. What is more, the operation mechanisms and implementing methods for DTS are studied and key technologies as well as challenges ahead are investigated, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“tracking a product throughout its life cycle [76]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [76]
In the citing paper
“Research indicates that integrating Digital Twins into building management can result in energy savings of up to 30% [10,24,25].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“A Digital Twin is a virtual replica of a physical system, designed to simulate its behavior and performance under varying conditions [9,10].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“The accuracy and effectiveness of DTs heavily depend on the quality of collected data, and inconsistent or incomplete data can lead to inaccurate predictions and inefficient decision-making.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“As a result, maintenance costs in energy-intensive industries have been reduced by 20 to 30 percent.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 1×
“[37], [38].”
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Cyber-physical Production Systems: Roots, Expectations and R&D Challenges
Monostori, L. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.115 · Cited by 1,215
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“[37], [38].”
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480 · cited 1×
“3) Construction and management of SDTD Technologies involve data cleaning, data integration, data fusion, two-way mirrors between physical and virtual data, shop-floor big data [40], etc.”
BackgroundSelf-citationRFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462 · cited 1×
“build an RFID-enabled real-time manufacturing execution system, which provides more practical planning and scheduling decisions for shop-floor [25].”
BackgroundTao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2232936 · Cited by 362 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationSyberfeldt, A., Danielsson, O., & Gustavsson, P. (2017) · IEEE Access · doi:10.1109/access.2017.2703952 · Cited by 221 · cited 1×
“After that, layout optimization [28], production planning [29], [30] and fault diagnosis [31], etc.”
Method
Research works printed but not linked: 1
- tao, 2017, Digital twin workshop: A new paradigm for future workshop, Comput Integr Manuf Syst, 23, 1
Cited by
Items 101–200 of 1,426
Park, K. T., Lee, J., Kim, H.-J., & Noh, S. D. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04653-7 · Cited by 174
Yli-Ojanperä, M., Sierla, S., Papakonstantinou, N., & Vyatkin, V. (2019) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2018.12.002 · Cited by 173
Digital twin and blockchain enhanced smart manufacturing service collaboration and management
Tao, F., Zhang, Y., Cheng, Y., Ren, J., Wang, D., Qi, Q., & Li, P. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.11.008 · Cited by 164
Self-citationSmart manufacturing scheduling: A literature review
Serrano-Ruiz, J. C., Mula, J., & Poler, R. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.09.011 · Cited by 158
Recent trends of digital twin technologies in the energy sector: A comprehensive review
Ghenai, C., Husein, L. A. H., Nahlawi, M. A., Hamid, A., & Bettayeb, M. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2022.102837 · Cited by 148
Digital twin enhanced BIM to shape full life cycle digital transformation for bridge engineering
Honghong, S., Gang, Y., Haijiang, L., Tian, Z., & Annan, J. (2023) · Automation in Construction · doi:10.1016/j.autcon.2022.104736 · Cited by 160
Ahn, S. J. (., Kim, J., & Kim, J. (2022) · Journal of Advertising · doi:10.1080/00913367.2022.2111729 · Cited by 161
“…and physical worlds is described well in the concept of digital twins, as discussed in the disciplines of engineering and manufacturing (Grieves 2014; Tao and Zhang 2017), wherein a virtual replica of a physical product seamlessly cycles data between the respective virtual and physical worlds.”
BackgroundDigital twin-based assembly data management and process traceability for complex products
Zhuang, C., Gong, J., & Liu, J. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.05.011 · Cited by 159
Yu, D., & He, Z. (2022) · Natural Hazards · doi:10.1007/s11069-021-05190-x · Cited by 190
“Tao and Zhang (2017a) initially listed service dimension as the key component in DT frame and proposed the concept of the 5D model, which consists of data, physical entities, virtual models, services, and connections.”
BackgroundMethodJiang, Y., Li, M., Li, M., Liu, X., Zhong, R. Y., Pan, W., & Huang, G. Q. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104397 · Cited by 163
Tao, F., Zhang, M., & Nee, A. Y. C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817630-6.00010-2 · Cited by 170
Self-citationA Systematic Review of Construction 4.0 in the Context of the BIM 4.0 Premise
Begić, H., & Galić, M. (2021) · Buildings · doi:10.3390/buildings11080337 · Cited by 199
“The mentioned virtual replica of the building can be compared to a similar concept in the manufacturing industry called the digital twin [81].”
ResultCheng, Y., Zhang, Y., Ji, P., Xu, W., Zhou, Z., & Tao, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2001-2 · Cited by 161
“Recently, as the example of upgrading of current DFs towards smart manufacturing, a concept of digital twin shop-floor, especially its cyber-physical integration implementation, as well as its preliminary application, is discussed [48, 49].”
BackgroundSelf-citationZheng, P., & Sivabalan, A. S. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101958 · Cited by 155
Wu, C., Zhou, Y., Pessôa, M. V. P., Peng, Q., & Tan, R. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.006 · Cited by 172
Wang, M., Wang, C., Hnydiuk-Stefan, A., Feng, S., İncecik, A., & Li, Z. (2021) · Ocean Engineering · doi:10.1016/j.oceaneng.2021.109168 · Cited by 168
Trustworthy digital twins in the industrial internet of things with blockchain
Suhail, S., Hussain, R., Jurdak, R., & Hong, C. S. (2022) · IEEE Internet Computing · doi:10.1109/mic.2021.3059320 · Cited by 154
“Inconsistencies between the two spaces call for the adoption of better calibration and testing strategies that evolve DT models and physical counterparts to support more accurate estimation, optimization, and prediction of the industrial processes.(4)”
BackgroundAnalysis of Digital Twin Applications in Energy Efficiency: A Systematic Review
Ba, L., Tangour, F., El Abbassi, I., & Absi, R. (2025) · Sustainability · doi:10.3390/su17083560 · Cited by 153
A Feature-Based Framework for Structuring Industrial Digital Twins
Autiosalo, J., Vepsäläinen, J., Viitala, R., & Tammi, K. (2019) · IEEE Access · doi:10.1109/access.2019.2950507 · Cited by 178
The Current Status and Developing Trends of Industry 4.0: a Review
Lu, Y. (2021) · Information Systems Frontiers · doi:10.1007/s10796-021-10221-w · Cited by 176
“AI can be linked together by location search, weather patterns, consumer behavior, political status, and socioeconomic and macro-economic factors to estimate market demand (Tao & Zhang, 2017; Müller et al., 2018b; Chen et al., 2021).”
Modular Design and Real-Time Simulators Toward Power System Digital Twins Implementation
Arraño-Vargas, F., & Konstantinou, G. S. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3178713 · Cited by 163
“3178713 DT comprises: 1) a physical part; 2) a virtual part; 3) data which flow in a 4) two-way communication infrastructure; and 5) the service(s) provided [2].”
BackgroundDigital Twin Requirements in the Context of Industry 4.0
Durão, L. F. C. S., Haag, S., Anderl, R., Schützer, K., & Zancul, E. D. S. (2018) · IFIP advances in information and communication technology · doi:10.1007/978-3-030-01614-2_19 · Cited by 188
Machine learning techniques in emerging cloud computing integrated paradigms: A survey and taxonomy
Soni, D., & Kumar, N. (2022) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2022.103419 · Cited by 172
Machine-Learning-Driven Digital Twin for Lifecycle Management of Complex Equipment
Ren, Z., Wan, J., & Deng, P. (2022) · IEEE Transactions on Emerging Topics in Computing · doi:10.1109/tetc.2022.3143346 · Cited by 158
Digital twin data: methods and key technologies
Zhang, M., Tao, F., Huang, B., Liu, A., Wang, L., Anwer, N., & Nee, A. Y. C. (2021) · Digital Twin · doi:10.12688/digitaltwin.17467.1 · Cited by 157
Self-citationEnergy Digital Twin applications: A review
do Amaral, J. V. S., dos Santos, C. H., Montevechi, J. A. B., & de Queiroz, A. R. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113891 · Cited by 170
Digital Twins for Ports: Derived From Smart City and Supply Chain Twinning Experience
Klar, R., Fredriksson, A., & Angelakis, V. (2023) · IEEE Access · doi:10.1109/access.2023.3295495 · Cited by 178
“on how to achieve smart manufacturing [37].”
Iliuţă, M.-E., Moisescu, M.-A., Pop, E., Ionita, A.-D., Caramihai, S.-I., & Mitulescu, T.-C. (2024) · Applied Sciences · doi:10.3390/app14135454 · Cited by 134
“…the Digital Twin, through the integration of real-time sensor data, data obtained from simulation processes, and via Enterprise Information Systems (EISs), Tao and Zhang [30] highlighted how this technology facilitates the adaptation of production plans to changes in the manufacturing environment.”
MethodDigital twin for ship life-cycle: A critical systematic review
Mauro, F., & Kana, A. A. (2022) · Ocean Engineering · doi:10.1016/j.oceaneng.2022.113479 · Cited by 157
“All papers dealing with the production part are aligned with the shop-floor DT concept given by Tao and Zhang (2017), which is the basis for all the digital processes in industrial productions.”
MethodA multi-scale modeling method for digital twin shop-floor
Zhang, H., Qi, Q., & Tao, F. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.12.011 · Cited by 139
Self-citationZeb, S., Mahmood, A., Hassan, S. A., Piran, M. J., Gidlund, M., & Guizani, M. (2022) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2021.103309 · Cited by 132
Yan, J., Liu, Z., Zhang, C., Zhang, T., Zhang, Y., & Yang, C. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102198 · Cited by 132
Digital twin enhanced human-machine interaction in product lifecycle
Ma, X., Tao, F., Zhang, M., Wang, T., & Zuo, Y. N. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.330 · Cited by 131
Self-citationSynchroperation in industry 4.0 manufacturing
Guo, D., Li, M., Lyu, Z., Kang, K., Wu, W. Y., Zhong, R. Y., & Huang, G. Q. (2021) · International Journal of Production Economics · doi:10.1016/j.ijpe.2021.108171 · Cited by 159
Industry application of digital twin: from concept to implementation
Fang, X., Wang, H., Liu, G., Tian, X., Ding, G., & Zhang, H. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09632-z · Cited by 154
“In the current DT research, to respond to the rapid change demand of the production line, Zhang et al. [48] integrated the system modeling based on physics and the real-time process data of the manufacturing process to realize the rapid design scheme of hollow glass production line.”
MethodInfluentialDigital Twins for Additive Manufacturing: A State-of-the-Art Review
Zhang, L., Chen, X., Zhou, W., Cheng, T., Chen, L., Guo, Z., Han, B., & Lu, L. (2020) · Applied Sciences · doi:10.3390/app10238350 · Cited by 126
“However, the acquisition of full compatibility for various communication protocols and interfaces is still challenging, and introducing digital twin technology on the shop-floor [38,41] to control the mechanism from cyber space to physical space is also in the workflow of the future.”
BackgroundDigital twin: current scenario and a case study on a manufacturing process
Roy, R. B., Mishra, D., Pal, S. K., Chakravarty, T., Panda, S., Chandra, M. G., Pal, A., Misra, P., Chakravarty, D., & Misra, S. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05306-w · Cited by 146
Digital twin-based industrial cloud robotics: Framework, control approach and implementation
Xu, W., Cui, J., Li, L., Yao, B., Tian, S., & Zhou, Z. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.013 · Cited by 127
Digital Twins for the Future Power System: An Overview and a Future Perspective
Song, Z. Q., Hackl, C. M., Anand, A., Thommessen, A., Petzschmann, J., Kamel, O., Braunbehrens, R., Kaifel, A. K., Roos, C., & Hauptmann, S. (2023) · Sustainability · doi:10.3390/su15065259 · Cited by 169
“Based on the standard three-elements architecture [45] (recall Figure 1), a more elaborated view on the DT was proposed in [46] by carving out five essential components: Real System , Virtual Model , Services , Data and Connections .”
Digital twin-driven cyber-physical production system towards smart shop-floor
Zhang, H., Zhang, G., & Yan, Q. (2018) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-1125-4 · Cited by 141
“The development of shop-floor stays in the third stage, namely, there exists the interaction between the physical space and the virtual space, but not complete interaction and communication (Tao and Zhang 2017).”
BackgroundDigital twins for information-sharing in remanufacturing supply chain: A review
Chen, Z., & Huang, L. (2020) · Energy · doi:10.1016/j.energy.2020.119712 · Cited by 142
State-of-the-art survey on digital twin implementations
Liu, Y. K., Ong, S. K., & Nee, A. Y. C. (2022) · Advances in Manufacturing · doi:10.1007/s40436-021-00375-w · Cited by 144
A Cross-Domain Systematic Mapping Study on Software Engineering for Digital Twins
Dalibor, M., Jansen, N., Rumpe⋆, B., Schmalzing, D., Wachtmeister, L., Wimmer, M., & Wortmann, A. (2022) · Journal of Systems and Software · doi:10.1016/j.jss.2022.111361 · Cited by 181
Kong, X., & Hucks, R. G. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104928 · Cited by 125
Digital assembly technology based on augmented reality and digital twins: a review
Qiu, C., Zhou, S., Liu, Z., Gao, Q., & Tan, J. (2019) · Virtual Reality & Intelligent Hardware · doi:10.1016/j.vrih.2019.10.002 · Cited by 141
“…data fusion analysis, decision-making iterative optimization, and other means, DT simulates the operating behavior of physical entities in the real environment with a virtual model to provide a bridge between the physical world and the information world over the entire life cycle of products [62] .”
BackgroundShared manufacturing in the sharing economy: Concept, definition and service operations
Yu, C., Xu, X. W., Yu, S., Sang, Z., Yang, C. W., & Jiang, X. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106602 · Cited by 138
A proactive material handling method for CPS enabled shop-floor
Wang, W., Zhang, Y., & Zhong, R. Y. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101849 · Cited by 122
Digital Twin Perspective of Fourth Industrial and Healthcare Revolution
Khan, S., Arslan, T., & Ratnarajah, T. (2022) · IEEE Access · doi:10.1109/access.2022.3156062 · Cited by 146
“[135, 152].”
Methoddos Santos, C. H., Montevechi, J. A. B., de Queiroz, J. A., Miranda, R. D. C., & Leal, F. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.1898691 · Cited by 150
“In this case, DT offers guidance for more efficient decision-making and, consequently, it is expected that DT will also adjust to the physical part with each improvement step, providing a mutual evolution between both physical and virtual environments (Tao and Zhang 2017).”
BackgroundMethodInfluentialDas, O., Zafar, M. H., Sanfilippo, F., Rudra, S., & Kolhe, M. L. (2024) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2024.100715 · Cited by 208
“Though DT technology originated in the aerospace and aviation industries, it has rapidly extended its applications to fields such as manufacturing [22 – 24], petrochemical [25,26], automotive systems [27], urbanisation and smart cities [28,29], and the power industry [30 – 32].”
Digital twin-based opti-state control method for a synchronized production operation system
Zhang, K., Qu, T., Zhou, D., Jiang, H., Lin, Y., Li, P., Guo, H., Liu, Y., Li, C., & Huang, G. Q. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101892 · Cited by 141
Simulation-based decision support tool for in-house logistics: the basis for a digital twin
Coelho, F., Relvas, S., & Barbosa‐Póvoa, A. P. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.107094 · Cited by 145
Reference Framework for Digital Twins within Cyber-Physical Systems
Josifovska, K., Yigitbas, E., & Engels, G. (2019) · 2019 IEEE/ACM 5th International Workshop on Software Engineering for Smart Cyber-Physical Systems (SEsCPS) · doi:10.1109/sescps.2019.00012 · Cited by 109
“The Data Management Methods are used for data collection, transmission, storage, integration, processing, cleaning, analysis, data mining and information extraction, as introduced in [10], [12], [14], [18], [27].”
BackgroundMethodInfluentialFrom Simulation to Autonomy: Reviews of the Integration of Artificial Intelligence and Digital Twins
Sajadieh, S. M. M., & Noh, S. D. (2025) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-025-00750-z · Cited by 157
“…coming from the field Alam and El Saddik [21] An exact cyber copy of a physical system that truly represents all its functionalities Tao and Zhang [22] A reference model to realize the convergence between physical and virtual spaces Graessler and Poehler [23] A cyber-physical device of its own,…”
Chen, H., Zhang, Z., Καραμανάκος, Π., & Rodríguez, J. (2022) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2022.3216719 · Cited by 130
“Integration A technique that maps the physical entity into a virtual body, which aims to manage the complete life cycle process of the entity through historical and real-time data as well as intelligent algorithms [15], [16]”
MethodA enhanced interaction framework based on VR, AR and MR in digital twin
Ke, S., Xiang, F., Zhang, Z., & Zuo, Y. N. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.103 · Cited by 117
A framework using BIM and digital twins in facilitating LCSA for buildings
Boje, C., Menacho, Á. J. H., Marvuglia, A., Benetto, E., Kubicki, S., Schaubroeck, T., & Gutiérrez, T. N. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107232 · Cited by 140
Yu, C., Jiang, X., Yu, S., & Yang, C. W. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101931 · Cited by 119
Zhou, Y., Xing, T., Song, Y., Li, Y., Zhu, X., Li, G., & Ding, S. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.019 · Cited by 113
Digital‐twin assisted: Fault diagnosis using deep transfer learning for machining tool condition
Deebak, B. D., & Al‐Turjman, F. (2022) · International Journal of Intelligent Systems · doi:10.1002/int.22493 · Cited by 104
“Zhang et al. 61 Production planning (fusion and recognition) The digital ‐ twin model enables human ‐ based production process to support data acquisition and dynamic simulation.”
BackgroundDigital Twin for Human–Robot Collaboration in Manufacturing: Review and Outlook
Ramasubramanian, A. K., Mathew, R., Kelly, M., Hargaden, V., & Papakostas, N. (2022) · Applied Sciences · doi:10.3390/app12104811 · Cited by 127
A Reconfigurable Modeling Approach for Digital Twin-based Manufacturing System
Zhang, C., Xu, W., Liu, J., Liu, Z., Zhou, Z., & Pham, D. T. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.141 · Cited by 106
Model-Driven Development of a Digital Twin for Injection Molding
Bibow, P., Dalibor, M., Hopmann, C., Mainz, B., Rumpe⋆, B., Schmalzing, D., Schmitz, M., & Wortmann, A. (2020) · Lecture notes in computer science · doi:10.1007/978-3-030-49435-3_6 · Cited by 140
A simulation-based approach for plant layout design and production planning
Zhang, Z., Wang, X., Wang, X., Cui, F., & Cheng, H. (2018) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0687-5 · Cited by 128
“For example, Yildiz (2013) developed a hybrid optimization method which was based on an artificial bee colony algorithm and Taguchi method.”
BackgroundMethodDigital Twin Providing New Opportunities for Value Co-Creation through Supporting Decision-Making
West, S., Stoll, O., Meierhofer, J., & Züst, S. (2021) · Applied Sciences · doi:10.3390/app11093750 · Cited by 120
Pérez, A. T. E., Rossit, D. A., Tohmé, F., & Vásquez, Ó. C. (2021) · Information Fusion · doi:10.1016/j.inffus.2021.09.021 · Cited by 117
Qi, Q., Zhao, D., Liao, T. W., & Tao, F. (2018) · Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing · doi:10.1115/msec2018-6435 · Cited by 105
Self-citationDigital Twin for Smart Manufacturing: The Simulation Aspect
Shao, G., Jain, S., Laroque, C., Lee, L., Lendermann, P., & Rose, O. (2019) · Online World Conference on Soft Computing in Industrial Applications · doi:10.1109/wsc40007.2019.9004659 · Cited by 86
Intelligent scheduling of a feature-process-machine tool supernetwork based on digital twin workshop
Liu, Z., Chen, W., Zhang, C., Yang, C., & Cheng, Q. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.016 · Cited by 111
Digital twin and its applications: A survey
Zhang, R., Wang, F., Cai, J., Wang, Y., Guo, H., & Zheng, J. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10445-3 · Cited by 126
“Recent development in this field includes data-driven intelligent manufacturing [82], design system [83], operation and maintenance [84], simulation, and optimization [85], etc.”
BackgroundWarke, V., Kumar, S., Bongale, A., & Kotecha, K. (2021) · Sustainability · doi:10.3390/su131810139 · Cited by 103
“As such, the industries thrive on making their product, process, or shop floor intelligent and smart, which involves self-decision-making and parameter optimization [27,28].”
BackgroundData management for developing digital twin ontology model
Singh, S., Shehab, E., Higgins, N., Fowler, K., Reynolds, D., Erkoyuncu, J. A., & Gadd, P. (2021) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405420978117 · Cited by 104
“DT is built on three main pillars: (a) a physical product in real space, (b) a virtual product in virtual space and (c) the connection of data and information which ties together both the spaces.(3) Today, the lower costs and improved power and capabilities resulted in leaders to combine Information Technology (IT) an…”
BackgroundCognitive digital twin: An approach to improve the maintenance management
D’Amico, R. D., Erkoyuncu, J. A., Addepalli, S., & Penver, S. (2022) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2022.06.004 · Cited by 123
“They also added all the papers that cited the three seminal papers of DTs written by Grieves [17,18] and Tao et al. [19], resulting in a total of 92 publications.”
BackgroundENIGMA: An explainable digital twin security solution for cyber–physical systems
Suhail, S., Iqbal, M., Hussain, R., & Jurdak, R. (2023) · Computers in Industry · doi:10.1016/j.compind.2023.103961 · Cited by 122
Industry 4.0 Implementation Challenges and Opportunities: A Technological Perspective
Rikalović, A., Suzić, N., Bajić, B., & Piuri, V. (2021) · IEEE Systems Journal · doi:10.1109/jsyst.2021.3101673 · Cited by 114
Secure sharing of big digital twin data for smart manufacturing based on blockchain
Shen, W., Hu, T., Zhang, C., & Ma, S. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.09.014 · Cited by 113
Survey on digital twins for Internet of Vehicles: Fundamentals, challenges, and opportunities
Guo, J., Bilal, M., Qiu, Y., Qian, C., Xu, X., & Raymond Choo, K.-K. (2024) · Digital Communications and Networks · doi:10.1016/j.dcan.2022.05.023 · Cited by 99
Digital twin for integration of design-manufacturing-maintenance: an overview
Fu, Y., Zhu, G., Zhu, M., & Xuan, F. (2022) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-022-00760-x · Cited by 98
“2017 Fei Tao Beihang University Smart shop-floor The concept of the digital twin-based Digital Twin Shop is explored and the four key components of digital twins are discussed, namely the physical shop, the virtual shop, the shop service system and the shop digital twin data [23], [43], [70], [103]–[108]”
BackgroundConstruction method of shop-floor digital twin based on MBSE
Liu, J., Liu, J., Zhuang, C., Liu, Z., & Miao, T. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.004 · Cited by 109
Advances of Digital Twins for Predictive Maintenance
You, Y., Chen, C., Hu, F., Liu, Y., & Ji, Z. (2022) · Procedia Computer Science · doi:10.1016/j.procs.2022.01.348 · Cited by 106
Jiang, Y., Liu, X., Wang, Z., Li, M., Zhong, R. Y., & Huang, G. Q. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104747 · Cited by 107
Suhail, S., Malik, S. U. R., Jurdak, R., Hussain, R., Matulevičius, R., & Svetinović, D. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103699 · Cited by 106
“Inconsistencies between the two spaces call for the adoption of better strategies that evolve DTs and physical counterparts to support accurate prediction and optimization of the underlying processes [2, 28].”
BackgroundNewrzella, S. R., Franklin, D. W., & Haider, S. (2021) · IEEE Access · doi:10.1109/access.2021.3115055 · Cited by 113
“Further research works extended this three-part concept to detailed architectures [71]–[73] but the core parts remain the same.”
BackgroundToward digital validation for rapid product development based on digital twin: a framework
Huang, S., Wang, G., Lei, D., & Yan, Y. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08475-4 · Cited by 113
“The digital twin of manufacturing system [20] provides an ultrahigh-fidelity virtual manufacturing system to support the construction of digital trial manufacturing system for the trial manufacturing of new product in the virtual space.”
MethodDigital Twin Applications: A Survey of Recent Advances and Challenges
Mendonça, R. D. S., Lins, S. D. O., de Bessa, I. V., Ayres, F. A. C., de Medeiros, R. L. P., & de Lucena, V. F. (2022) · Processes · doi:10.3390/pr10040744 · Cited by 115
“[54] Proposed for the detailed representation of a complex shopfloor organization system employing automated robotic vehicles (AGV).”
BackgroundKumar, R., Rani, S., & Awadh, M. A. (2022) · Sensors · doi:10.3390/s22114276 · Cited by 104
“8 2018 2 138 6 [66] link strength; Ƥ Ŝŷ : Publication start year Eminent scientists from the most recognized educational institutions around the globe have also submitted papers.”
BackgroundInfluentialA review of unit level digital twin applications in the manufacturing industry
Böttjer, T., Tola, D., Kakavandi, F., Wewer, C. R., Ramanujan, D., Gomes, C. Â. G., Larsen, P. G., & Iosifidis, A. (2023) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2023.06.011 · Cited by 111
“Tao and Zhang [132] conceptualized shop floor DTs and studied operation and implementation methods for SM. Qi and Tao [106], Zhuang et al. [154] described the synergy of Big Data and DT as an enabler for SM, where data analytics lead to intelligent behavior of systems, and DTs integrate virtual and…”
BackgroundAutomation in road distress detection, diagnosis and treatment
Yang, X., Zhang, J., Liu, W., Jing, J., Zheng, H., & Xu, W. (2024) · Journal of Road Engineering · doi:10.1016/j.jreng.2024.01.005 · Cited by 91
Zhang, X.-Q., & Zhu, W.-H. (2019) · International Journal of Advanced Robotic Systems · doi:10.1177/1729881419880663 · Cited by 77
“At present, there is a great shortage of real-time data interaction and convergence between virtual models and physical manufacture equipment to generate accurate information for smart product manufacturing system.(5) In this context, as a most potent tool to support future interaction with physical and virtual worlds…”
BackgroundDigital Twin-Based Optimization for Ultraprecision Motion Systems With Backlash and Friction
Guerra, R. H., Quiza, R., Villalonga, A., Arenas, J., & Castano, F. (2019) · IEEE Access · doi:10.1109/access.2019.2928141 · Cited by 89
“New research working towards shop-floor DT systems was reported in the literature as well as key components ranging from physical to DT data [9].”
BackgroundZhang, M., Zuo, Y., & Tao, F. (2018) · 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC) · doi:10.1109/icnsc.2018.8361272 · Cited by 83
“Then the operating mechanism and implementing method of DTS are also studied [22].”
BackgroundMethodSelf-citationCyberFactory#1 — Securing the industry 4.0 with cyber-ranges and digital twins
Becue, A., Fourastier, Y., Praca, I., Savarit, A., Baron, C., Gradussofs, B., Pouille, E., & Thomas, C. (2018) · 2018 14th IEEE International Workshop on Factory Communication Systems (WFCS) · doi:10.1109/wfcs.2018.8402377 · Cited by 89
“Zhang [12] propose a novel concept of digital twin shop-floor, explored in four components: physical, virtual, shop-floor service and shopfloor digital twin data.”
BackgroundExploiting the Digital Twin in the Assessment and Optimization of Sustainability Performances
Barni, A., Fontana, A., Menato, S., Sorlini, M., & Canetta, L. (2018) · IEEE International Conference on Intelligent Systems · doi:10.1109/is.2018.8710554 · Cited by 94
Improved multi-fidelity simulation-based optimisation: application in a digital twin shop floor
Zhang, Z.-M., Guan, Z., Gong, Y., Luo, D., & Yue, L. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1849846 · Cited by 80
“Based on this demand, driven by Industry 4.0 (Wang et al. 2015; Schluse et al. 2018), cloud computing (Tao and Zhang 2017; Liu, Wan, and Zhou 2014), big data (Wan et al. 2017; Chen, Mao, and Liu2014), and other new generation technologies (Ding et al. 2020), the concept of digital twins has emerged…”
BackgroundInfluentialMulti-scale evolution mechanism and knowledge construction of a digital twin mimic model
Liu, S., Lu, Y., Li, J., Song, D., Sun, X., & Bao, J. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102123 · Cited by 95
Jia, W., Wang, W., & Zhang, Z. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101915 · Cited by 92
Smart City Digital Twin Framework for Real-Time Multi-Data Integration and Wide Public Distribution
Adreani, L., Bellini, P., Fanfani, M., Nesi, P., & Pantaleo, G. (2024) · IEEE Access · doi:10.1109/access.2024.3406795 · Cited by 99
“Later, Digital Twins begun to emerge in other fields, such as, for example, in the manufacturing [6, 7], or in construction industries [8].”
BackgroundFatigue crack growth prediction method for offshore platform based on digital twin
Fang, X., Wang, H., Li, W., Liu, G., & Cai, B. (2021) · Ocean Engineering · doi:10.1016/j.oceaneng.2021.110320 · Cited by 87
Ma, S., Flanigan, K. A., & Berges, M. E. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102800 · Cited by 114
“Applications have been detailed in di ff erent resolutions, including advanced machinery, assembly lines, and shop floors, which explore the potential of DTs in high-precision manufacturing environments to inform decisions and reduce downtime and operational costs [16, 17, 18].”
BackgroundAdvancing digital twin implementation: a toolbox for modelling and simulation
Singh, S., Weeber, M., & Birke, K.-P. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.03.078 · Cited by 86
Metadata
- Authors
- Tao, F., & Zhang, M.
- Affiliations
- Beihang University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 20418-20427
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2757110387
- Cited by
- 1,397
- References
- 40
- Citations by year
- 2026: 155 · 2025: 179 · 2024: 178 · 2023: 232 · 2022: 207 · 2021: 180 · 2020: 135 · 2019: 90 · 2018: 40 · 2017: 1
- FWCI
- 79.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51522501)
- National Key Research and Development Program of China (2016YFB1101700)
- Beijing Nova Program in China (Z161100004916063)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, smart manufacturing, shop floor, Industry 4.0, cyber-physical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.