Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
With the developments and applications of the new information technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, a smart manufacturing era is coming. At the same time, various national manufacturing development strategies have been put forward, such as Industry 4.0, Industrial Internet, manufacturing based on Cyber-Physical System, and Made in China 2025. However, one of specific challenges to achieve smart manufacturing with these strategies is how to converge the manufacturing physical world and the virtual world, so as to realize a series of smart operations in the manufacturing process, including smart interconnection, smart interaction, smart control and management, etc. In this context, as a basic unit of manufacturing, shop-floor is required to reach the interaction and convergence between physical and virtual spaces, which is not only the imperative demand of smart manufacturing, but also the evolving trend of itself. Accordingly, a novel concept of digital twin shopfloor (DTS) based on digital twin is explored and its four key components are discussed, including physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor digital twin data. What is more, the operation mechanisms and implementing methods for DTS are studied and key technologies as well as challenges ahead are investigated, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“tracking a product throughout its life cycle [76]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [76]
In the citing paper
“Research indicates that integrating Digital Twins into building management can result in energy savings of up to 30% [10,24,25].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“A Digital Twin is a virtual replica of a physical system, designed to simulate its behavior and performance under varying conditions [9,10].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“The accuracy and effectiveness of DTs heavily depend on the quality of collected data, and inconsistent or incomplete data can lead to inaccurate predictions and inefficient decision-making.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“As a result, maintenance costs in energy-intensive industries have been reduced by 20 to 30 percent.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 1×
“[37], [38].”
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Cyber-physical Production Systems: Roots, Expectations and R&D Challenges
Monostori, L. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.115 · Cited by 1,215
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“[37], [38].”
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480 · cited 1×
“3) Construction and management of SDTD Technologies involve data cleaning, data integration, data fusion, two-way mirrors between physical and virtual data, shop-floor big data [40], etc.”
BackgroundSelf-citationRFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462 · cited 1×
“build an RFID-enabled real-time manufacturing execution system, which provides more practical planning and scheduling decisions for shop-floor [25].”
BackgroundTao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2232936 · Cited by 362 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationSyberfeldt, A., Danielsson, O., & Gustavsson, P. (2017) · IEEE Access · doi:10.1109/access.2017.2703952 · Cited by 221 · cited 1×
“After that, layout optimization [28], production planning [29], [30] and fault diagnosis [31], etc.”
Method
Research works printed but not linked: 1
- tao, 2017, Digital twin workshop: A new paradigm for future workshop, Comput Integr Manuf Syst, 23, 1
Cited by
Items 201–300 of 1,426
Barenji, A. V., Liu, X., Guo, H., & Li, Z. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1775297 · Cited by 119
“On this basis, (Tao and Zhang 2017) proposed a novel concept of the digital twin shop-floor (DTS) based on the digital twin.”
BackgroundA novel application architecture of digital twin in smart grid
Jiang, Z., Lv, H., Li, Y., & Guo, Y. (2021) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-021-03329-z · Cited by 97
Martinez, E. M., Ponce, P., Macias, I., & Molina, A. (2021) · Sensors · doi:10.3390/s21144656 · Cited by 110
“The DT description was shown in 2003 at the University of Michigan by Grieves in a PLM presentation [10].”
BackgroundMethodInfluentialDigital twin enhanced fault prediction for the autoclave with insufficient data
Wang, Y., Tao, F., Zhang, M., Wang, L., & Zuo, Y. N. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.015 · Cited by 84
Self-citationFeng, Q., Zhang, Y., Sun, B., Guo, X., Fan, D., Ren, Y., Song, Y.-J., & Wang, Z.-L. (2023) · Journal of manufacturing systems · doi:10.1016/j.jmsy.2023.05.004 · Cited by 68
Leveraging digital twin into dynamic production scheduling: A review
Ouahabi, N., Chebak, A., Kamach, O., Laayati, O., & Zegrari, M. (2024) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2024.102778 · Cited by 88
Ante, L. (2021) · Manufacturing Letters · doi:10.1016/j.mfglet.2021.01.003 · Cited by 91
A framework and method for Human-Robot cooperative safe control based on digital twin
Li, H., Ma, W., Wang, H., Liu, G., Wen, X., Zhang, Y., Yang, M., Luo, G., Xie, G., & Sun, C. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101701 · Cited by 88
Geng, X., Wang, F., Wu, H., Wang, S., Wu, G., Gao, J., Zhao, H., Zhang, C., & Mao, X. (2023) · Materials Genome Engineering Advances · doi:10.1002/mgea.10 · Cited by 97
Digital thread-based modeling of digital twin framework for the aircraft assembly system
Zhang, Q., Zheng, S., Yu, C., Wang, Q., & Ke, Y. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.10.004 · Cited by 82
Digital Twin Applications : A first systemization of their dimensions
Uhlenkamp, J.-F., Hribernik, K., Wellsandt, S., & Thoben, K. (2019) · IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) · doi:10.1109/ice.2019.8792579 · Cited by 109
“Tao states that physical objects generate this data without further processing [27].”
BackgroundDigital twin for propulsion drive of autonomous electric vehicle
Rassõlkin, A., Vaimann, T., Kallaste, A., & Kuts, V. (2019) · IEEE International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) · doi:10.1109/rtucon48111.2019.8982326 · Cited by 81
Santos, C. H. D., de Queiroz, J. A., Leal, F., & Montevechi, J. A. B. (2022) · Journal of Simulation · doi:10.1080/17477778.2020.1811172 · Cited by 79
“When referring to operational decisions in the industry process, DT has stood out due to its ability to assist in decision making on the shop floor (Tao & Zhang, 2017).”
BackgroundMethodPapyshev, G., & Yarime, M. (2021) · Data & Policy · doi:10.1017/dap.2021.17 · Cited by 92
“Tao and Zhang (2017) propose to expand the three-dimensional model of a DTcomprising of a physical part, virtual part, and connections between them with data and service.”
BackgroundChen, K., Zhu, X., Anduv, B., Jin, X., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2022.124040 · Cited by 85
Stavropoulos, P., & Mourtzis, D. (2022) · Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology · doi:10.1016/b978-0-12-823657-4.00010-5 · Cited by 80
Machining process-oriented monitoring method based on digital twin via augmented reality
Liu, S., Lu, S., Li, J., Sun, X., Lu, Y., & Bao, J. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06838-5 · Cited by 86
Wang, H., Peng, T., Nassehi, A., & Tang, R. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.08.001 · Cited by 86
Research progress in machining technology of aerospace thin-walled components
Li, Z., Zeng, Z., Yu, Y., Ouyang, Z., Ding, P., Sun, J., & Zhu, S. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.03.111 · Cited by 83
Rebelo, R. M. L., Pereira, S. C. F., & de Queiroz, M. M. (2021) · Benchmarking An International Journal · doi:10.1108/bij-02-2021-0085 · Cited by 87
Data management in digital twins: a systematic literature review
Correia, J. B., Abel, M., & Becker, K. E. (2023) · Knowledge and Information Systems · doi:10.1007/s10115-023-01870-1 · Cited by 106
“These data management functionalities are either explicitly encompassed in a dedicated DM component as proposed by [17], or scattered in other components of the DT.”
BackgroundMethodInfluentialDemonstration and evaluation of a digital twin-based virtual factory
Yildiz, E., Møller, C., & Bilberg, A. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06825-w · Cited by 94
Wu, Q., Mao, Y.-S., Chen, J., & Wang, C. (2021) · Journal of Marine Science and Engineering · doi:10.3390/jmse9030338 · Cited by 73
“According to the general architecture model and the definition of digital twin [37,38,40], an innovative application framework of digital twin-driven ship intelligent manufacturing system is presented as shown in Figure 1.”
BackgroundMethodShop Floor Digital Twin in Smart Manufacturing: A Systematic Literature Review
Corallo, A., Vecchio, V. D., Lezzi, M., & Morciano, P. (2021) · Sustainability · doi:10.3390/su132312987 · Cited by 90
A Modular Digital Twinning Framework for Safety Assurance of Collaborative Robotics
Douthwaite, J. A., Lesage, B., Gleirscher, M., Călinescu, R., Aitken, J. M., Alexander, R., & Law, J. (2021) · Frontiers in Robotics and AI · doi:10.3389/frobt.2021.758099 · Cited by 91
“Tao and Zhang (2017) present the notion of a digital twinned shop fl oor.”
BackgroundDigital Twin Modeling Enabled Machine Tool Intelligence: A Review
Zhang, L., Liu, J., & Zhuang, C. (2024) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-024-01036-2 · Cited by 88
“This study provides a theoretical reference for implementing a digital twin in a manufacturing workshop [22].”
BackgroundEnhancing Digital Twins through Reinforcement Learning
Cronrath, C., Aderiani, A. R., & Lennartson, B. (2019) · 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE) · doi:10.1109/coase.2019.8842888 · Cited by 74
“Another is the automatic and continuous update of models and model parameters needed over the life cycle of the system [1], [10].”
BackgroundModel construction of planning and scheduling system based on digital twin
Wang, Y., & Wu, Z. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05779-9 · Cited by 77
Dai, S. L., Zhao, G. L., Yu, Y., Zheng, P., Bao, Q., & Wang, W. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102173 · Cited by 85
Acceptance of the metaverse: a laboratory experiment on augmented and virtual reality shopping
Xi, N., Chen, J., Gama, F., Korkeila, H., & Hamari, J. (2024) · Internet Research · doi:10.1108/intr-05-2022-0334 · Cited by 93
“Otherinteractivetechnologiessuchasrecommendationsystems (Ahn et al ., 2015; Guo and Elgendi, 2013), robotics and artificial intelligence (Cruz et al ., 2019; Tao and Zhang, 2017) can also be integrated into virtual reality using interactive AR modalities.”
BackgroundA comprehensive survey of digital twins: Applications, technologies and security challenges
Jeremiah, S. R., Azzaoui, A. E., Xiong, N. N., & Park, J. H. (2024) · Journal of Systems Architecture · doi:10.1016/j.sysarc.2024.103120 · Cited by 95
Digital Twin for Energy Optimization in an SMT-PCB Assembly Line
Karanjkar, N., Joglekar, A., Mohanty, S., Prabhu, V., Raghunath, D., & Sundaresan, R. (2018) · 2018 IEEE International Conference on Internet of Things and Intelligence System (IOTAIS) · doi:10.1109/iotais.2018.8600830 · Cited by 76
“Case studies for the use of IoT-based digital twins in manufacturing have been described in [7], [8] and [9].”
BackgroundAlimam, H., Mazzuto, G., Tozzi, N., Ciarapica, F. E., & Bevilacqua, M. (2023) · Journal of King Saud University - Computer and Information Sciences · doi:10.1016/j.jksuci.2023.101846 · Cited by 90
Digital Twin Driven Green Material Optimal-Selection towards Sustainable Manufacturing
Xiang, F., Zhang, Z., Zuo, Y. N., & Tao, F. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.015 · Cited by 74
Self-citationVirtual Factory: Digital Twin Based Integrated Factory Simulations
Yildiz, E., Møller, C., & Bilberg, A. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.04.043 · Cited by 81
Matsunaga, F., Zytkowski, V. A., Valle, P. D., & Deschamps, F. (2022) · Journal of Energy Resources Technology · doi:10.1115/1.4053868 · Cited by 84
A consistency evaluation method for digital twin models
Zhang, H., Qi, Q., & Tao, F. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.09.006 · Cited by 74
Self-citationGeng, R., Li, M., Hu, Z., Han, Z., & Zheng, R. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03426-3 · Cited by 82
“Then, Tao and Zhang expanded the Digital Twin structure to incorporate two additional components: data and service (Tao and Zhang 2017).”
BackgroundMachine and Deep Learning for Digital Twin Networks: A Survey
Qin, B., Pan, H., Dai, Y., Si, X., Huang, X., Yuen, C., & Zhang, Y. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3416733 · Cited by 102
“In recent years, researchers have developed a more precise definition to describe DT. Tao and Zhang [10] expanded the DT model into a 5-”
BackgroundJiang, Y., Su, S., Zhao, S., Zhong, R. Y., Qiu, W., Skibniewski, M. J., Brilakis, I., & Huang, G. Q. (2024) · Developments in the Built Environment · doi:10.1016/j.dibe.2024.100512 · Cited by 106
Wang, T., Li, J., Kong, Z., Liu, X., Snoussi, H., & Lv, H. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.011 · Cited by 82
Digital twin-driven framework for improving self-management of ergonomic risks
Ogunseiju, O. R., Olayiwola, J., Akanmu, A. A., & Nnaji, C. A. (2021) · Smart and Sustainable Built Environment · doi:10.1108/sasbe-03-2021-0035 · Cited by 81
Towards a connected Digital Twin Learning Ecosystem in manufacturing: Enablers and challenges
García, Á., Bregón, A., & Martínez‐Prieto, M. A. (2022) · Computers & Industrial Engineering · doi:10.1016/j.cie.2022.108463 · Cited by 84
Virtual Reality Solutions Employing Artificial Intelligence Methods: A Systematic Literature Review
de Oliveira, T. R., Rodrigues, B. B., da Silva, M. M., Spinasse, R. A. N., Ludke, G. G., Gaudio, M. R. S., Gomes, G. I. R., Cotini, L. G., Vargens, D. D. S., Schimidt, M. Q., et al. (2022) · ACM Computing Surveys · doi:10.1145/3565020 · Cited by 81
“However, the work of [164] developed a shop floor(cid:1745)s digital twin, converging physical and virtual space, which increases management efficiency.”
BackgroundLatif, K., Sharafat, A., & Seo, J. (2023) · Applied Sciences · doi:10.3390/app132011435 · Cited by 83
“The research company Gartner even listed the concept as one of the top ten most promising technological trends for the upcoming ten years in its 2018 forecast [44].”
BackgroundA state of the art in digital twin for intelligent fault diagnosis
Hu, C., Zhang, Z., Li, C., Leng, M., Wang, Z., Wan, X., & Chen, C. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102963 · Cited by 80
Liu, Z., Chen, W., Zhang, C., Yang, C., & Chu, H. (2019) · IEEE Access · doi:10.1109/access.2019.2957202 · Cited by 78
“Fei and Zhang [18] proposed the concept of digital twin workshop, realizing the interaction and integration of physical and virtual workshops.”
BackgroundNDE 4.0: Progress, promise, and its role to industry 4.0
Meyendorf, N., Ida, N., Singh, R. R., & Vrana, J. (2023) · NDT & E International · doi:10.1016/j.ndteint.2023.102957 · Cited by 72
Challenges of Digital Twin in High Value Manufacturing
Singh, S., Shehab, E., Higgins, N., Fowler, K., Tomiyama, T., & Fowler, C. (2018) · SAE Technical Paper Series · doi:10.4271/2018-01-1928 · Cited by 66
Closed-loop digital twin system for air cargo load planning operations
Wong, E. Y. C., Mo, D. Y. W., & So, S. C. K. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1775299 · Cited by 79
“Digital twin has been developed and applied mostly in product design, engineering and manufacturing (Tao et al. 2018a; Tao and Zhang 2017; Söderberg et al. 2017; Rosen et al. 2015).”
MethodBi-level dynamic scheduling architecture based on service unit digital twin agents
Zhang, J., Deng, T., Jiang, H., Chen, H., Qin, S., & Ding, G. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.007 · Cited by 76
Digital twin-driven fault diagnosis for CNC machine tool
Xue, R., Zhang, P., Huang, Z., & Wang, J. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09978-4 · Cited by 79
“With the rapid advancements of simulation, sensor monitoring and data interconnection technologies, high-fidelity digital models of physical systems can be constructed, and digital twin begins to be applied to fault diagnosis [18, 19].”
Jiang, Y., Li, M., Wu, W. Y., Wu, X., Zhang, X., Huang, X., Zhong, R. Y., & Huang, G. Q. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101951 · Cited by 73
Afzal, M., Li, R. Y. M., Shoaib, M., Ayyub, M. F., Tagliabue, L. C., Bilal, M., Ghafoor, H., & Manta, O. P. (2023) · Sustainability · doi:10.3390/su152316436 · Cited by 93
Development of an edge computing-based cyber-physical machine tool
Zhang, J., Deng, C., Zheng, P., Xu, X. W., & Ma, Z. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102042 · Cited by 75
A digital twin-enabled value stream mapping approach for production process reengineering in SMEs
Lu, Y., Liu, Z., & Min, Q. (2021) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2021.1872099 · Cited by 84
“Currently, with the application of new-generation information technologies in the manufacturing industry, such as IoT-based digital twins, the convergence between physical products and virtual space has accelerated (Qu et al. 2015; Tao et al. 2017; Bortolini et al. 2018).”
BackgroundAn effective MBSE approach for constructing industrial robot digital twin system
Zhang, X., Wu, B., Zhang, X., Duan, J., Wan, C., & Hu, Y. (2022) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102455 · Cited by 82
Piron, M., Wu, J., Fedele, A., & Manzardo, A. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.170263 · Cited by 82
Digital Supply Chain Twins—Conceptual Clarification, Use Cases and Benefits
Gerlach, B., Zarnitz, S., Nitsche, B., & Straube, F. (2021) · Logistics · doi:10.3390/logistics5040086 · Cited by 87
Adoption of Industry 4.0 technologies by organizations: a maturity levels perspective
de Queiroz, M. M., Wamba, S. F., Jabbour, C. J. C., Jabbour, A. B. L. D. S., & Machado, M. C. (2022) · Annals of Operations Research · doi:10.1007/s10479-022-05006-6 · Cited by 82
A Five-Step Approach to Planning Data-Driven Digital Twins for Discrete Manufacturing Systems
Resman, M., Protner, J., Šimić, M., & Herakovič, N. (2021) · Applied Sciences · doi:10.3390/app11083639 · Cited by 81
“The authors [12,33,34] introduced digital twin shop-floor to present the interaction and convergence between physical and virtual spaces.”
BackgroundDigital twin in transportation infrastructure management: a systematic review
Yan, B., Fan, Y., Qiu, S., Wang, J., Cai, B., Wang, S., Zaheer, Q., Wang, W., Chen, Y., & Hu, W. (2023) · Intelligent Transportation Infrastructure · doi:10.1093/iti/liad024 · Cited by 95
Architecture for Digital Twin implementation focusing on Industry 4.0
Rolle, R. P., Martucci, V., & Godoy, E. P. (2020) · IEEE Latin America Transactions · doi:10.1109/tla.2020.9082917 · Cited by 75
“O sistema virtual deve refletir o comportamento do sistema real e prover informac¸˜ao ´util para diversas finalidades, tais como predic¸˜ao de falhas, m´etricas de desempenho e otimizac¸˜ao [5].”
Frazzon, E. M., Agostino, Í. R. S., Broda, E., & Freitag, M. (2020) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2020.04.008 · Cited by 76
A twin data and knowledge-driven intelligent process planning framework of aviation parts
Li, J., Zhou, G., & Zhang, C. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.1951869 · Cited by 69
Kaiblinger, A., & Woschank, M. (2022) · Applied Sciences · doi:10.3390/app12020669 · Cited by 81
“Convergence between the physical and the virtual space is mandatory [17] to create a closed-loop interaction between these components [18].”
BackgroundDigital Twins From a Networking Perspective
Vaezi, M., Noroozi, K., Todd, T. D., Zhao, D., Karakostas, G., Wu, H., & Shen, X. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3200327 · Cited by 76
“The convergence between the physical and virtual systems is important for realizing various smart operations in the manufacturing process, such as automatic control and fault prediction [5].”
BackgroundThe Modeling and Using Strategy for the Digital Twin in Process Planning
Zhao, P., Liu, J., Jing, X., Tang, M., Sheng, S., Zhou, H., & Liu, X. (2020) · IEEE Access · doi:10.1109/access.2020.2974241 · Cited by 71
“Tao and Zhang [27] discussed the application of digital twin technology in depth, and put forward the main problems to be solved and ten applica-”
BackgroundInfluentialRapid construction method of equipment model for discrete manufacturing digital twin workshop system
Zhang, Y., Zhang, C., Yan, J., Yang, C., & Liu, Z. (2022) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102309 · Cited by 65
Review of Digital Twins for Constructed Facilities
Khallaf, R., Khallaf, L., Anumba, C., & Madubuike, O. C. (2022) · Buildings · doi:10.3390/buildings12112029 · Cited by 75
Digital twin monitoring and simulation integrated platform for reconfigurable manufacturing systems
Leng, B., Gao, S., Xia, T., Pan, E., Seidelmann, J., Wang, H., & Xi, L. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102141 · Cited by 71
Digital twin-enabled smart industrial systems: a bibliometric review
Ciano, M. P., Pozzi, R., Rossi, T., & Strozzi, F. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1852600 · Cited by 71
“In this context, several works on smart manufacturing identify its key enablers in cyber physical systems and digital twin (see among others Ding et al. 2019; Leng et al. 2019; Tao and Zhang 2017; Uhlemann, Lehmann, and Steinhilper 2017).”
BackgroundInfluentialImplementation of Digital Twins for electrical energy conversion systems in selected case studies
Rassõlkin, A., Orosz, T., Demidova, G., Kuts, V., Rjabtšikov, V., Vaimann, T., & Kallaste, A. (2021) · Proceedings of the Estonian Academy of Sciences · doi:10.3176/proc.2021.1.03 · Cited by 67
Roadmap to semi-automatic generation of digital twins for brownfield process plants
Sierla, S., Azangoo, M., Rainio, K., Papakonstantinou, N., Fay, A., Honkamaa, P., & Vyatkin, V. (2021) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100282 · Cited by 55
Human knowledge centered maintenance decision support in digital twin environment
Naqvi, S. M. R., Ghufran, M., Meraghni, S., Varnier, C., Nicod, J., & Zerhouni, N. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.10.003 · Cited by 70
Digital-Twin-Enhanced Quality Prediction for the Composite Materials
Wang, Y.-C., Tao, F., Zuo, Y. N., Zhang, M., & Qi, Q. (2023) · Engineering · doi:10.1016/j.eng.2022.08.019 · Cited by 63
Self-citationGong, H., Su, D., Zeng, S., & Chen, X. (2024) · Automation in Construction · doi:10.1016/j.autcon.2024.105578 · Cited by 68
Digital Twins for Clinical and Operational Decision-Making: Scoping Review
Riahi, V., Diouf, I., Khanna, S., Boyle, J., & Hassanzadeh, H. (2024) · Journal of Medical Internet Research · doi:10.2196/55015 · Cited by 78
“…size), physics (ie, the physical characteristics and constraints), behavior (the dynamic behavior and responsive mechanism to internal and external changes), and rules (using historical data and domain experts to develop logical abilities, such as reasoning, evaluation, and decision-making) [61].”
Liu, Y., Pan, S., & Ballot, É. (2024) · Digital engineering. · doi:10.1016/j.dte.2024.100025 · Cited by 77
Fantozzi, I. C., Santolamazza, A., Loy, G., & Schiraldi, M. M. (2025) · Future Internet · doi:10.3390/fi17010041 · Cited by 84
“For example, an analysis by Tao et al. in 2017 highlighted how using DTs optimizes manufacturing operations, improves resource management, and reduces waste [2].”
Digital twins in manufacturing: an assessment of drivers, enablers and barriers to implementation
Neto, A. A., Deschamps, F., da Silva, E. R., & de Lima, E. P. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.04.131 · Cited by 73
Enhancing Cognition for Digital Twins
Eirinakis, P., Kalaboukas, K., Lounis, S., Mourtos, I., Rožanec, J. M., Stojanović, N., & Zois, G. (2020) · IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) · doi:10.1109/ice/itmc49519.2020.9198492 · Cited by 80
“…continuity [13], data management [14] along the product lifecycle, as well as monitoring of physical twin assets [15] to even optimization of system behaviour [16] predominately in product design [17], production line design [18], shop floors [19] and production process optimization [20] purposes.”
BackgroundUysal, M. P., & Mergen, A. E. (2021) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100202 · Cited by 76
A digital twin–driven method for online quality control in process industry
Zhu, X., & Ji, Y. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08369-5 · Cited by 63
“In recent years, with the advancement of big data processing and analysis capability, cloud computing technology [28], artificial intelligence technology [29], simulation modeling theory [30], optimization algorithm [31], as well as availability of massive industrial data, digital twin technology has been developed an…”
Background3D printing in materials manufacturing industry: A realm of Industry 4.0
Tamir, T. S., Xiong, G., Shen, Z., Leng, J., Fang, Q., Yang, Y., Jiang, J., Lodhi, E., & Wang, F. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e19689 · Cited by 73
“In the manufacturing industry, digital twin technologies are increasingly used for designing, planning, and maintenance of production systems [209–211].”
MethodDigital twin-driven optimization of gas exchange system of 2-stroke heavy fuel aircraft engine
Xu, Z., Ji, F., Ding, S., Zhao, Y., Zhou, Y., Zhang, Q., & Du, F. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.002 · Cited by 63
A systematic review on the current research of digital twin in automotive application
Deng, S., Ling, L., Zhang, C., Li, C., Zeng, T., Zhang, K., & Guo, G. (2023) · Internet of Things and Cyber-Physical Systems · doi:10.1016/j.iotcps.2023.04.004 · Cited by 70
When is a simulation a digital twin? A systematic literature review
Wooley, A., Silva, D. F., & Bitencourt, J. (2023) · Manufacturing Letters · doi:10.1016/j.mfglet.2023.08.014 · Cited by 85
Operation Procedures of a Work-Center-Level Digital Twin for Sustainable and Smart Manufacturing
Park, K. T., Lee, D., & Noh, S. D. (2020) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00227-1 · Cited by 69
Overview of Digital Twin Technology in Wind Turbine Fault Diagnosis and Condition Monitoring
Olatunji, O. O., Adedeji, P. A., Madushele, N., & Jen, T. (2021) · IEEE International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) · doi:10.1109/icmimt52186.2021.9476186 · Cited by 61
Atalay, M., Murat, U., Oksuz, B., Parlaktuna, A. M., Pisirir, E., & Testik, M. C. (2022) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2021.2022762 · Cited by 76
Moiceanu, G., & Paraschiv, G. (2022) · Sensors · doi:10.3390/s22041388 · Cited by 71
Xie, H. S., Xin, M., Lu, C., & Xu, J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135231 · Cited by 72
A Conceptual Architecture and Model for Smart Manufacturing Relying on Service-Based Digital Twins
Catarci, T., Firmani, D., Leotta, F., Mandreoli, F., Mecella, M., & Sapio, F. (2019) · IEEE International Conference on Web Services (ICWS) · doi:10.1109/icws.2019.00047 · Cited by 63
“0” (≥ 2018) [23, 24] [25] R3 “semantic” / “model operations” (≥ 2018) [28, 4] [2, 20] R4 “data exchange” [20] [22] R5 “simulation” (≥ 2018) [19] [10, 7, 26]”
BackgroundSmart steel bridge construction enabled by BIM and Internet of Things in industry 4.0: A framework
Ding, K., Shi, H., Hui, J., Liu, Y., Zhu, B., Zhang, F., & Cao, W. (2018) · 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC) · doi:10.1109/icnsc.2018.8361339 · Cited by 59
“It firstly builds a “digital twin” [9,10] of the real steel bridge in a BIM platform, and simulates the construction processes to analyze the steel bridge performance and find the key influence factors.”
BackgroundLiang, Z., Wang, S., Peng, Y., Mao, X., Yuan, X., Yang, A., & Yin, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.03.002 · Cited by 60
AIoT-enabled digital twin system for smart tunnel fire safety management
Zhang, X., Jiang, Y., Wu, X., Nan, Z., Jiang, Y., Shi, J., Zhang, Y., Huang, X., & Huang, G. Q. (2024) · Developments in the Built Environment · doi:10.1016/j.dibe.2024.100381 · Cited by 64
Towards Machine Shop 4.0: A General Machine Model for CNC machine-tools through OPC-UA
Mourtzis, D., Milas, N. T., & Athinaios, N. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.09.045 · Cited by 59
Application Status and Prospect of Digital Twin for On-Orbit Spacecraft
Yang, W., Zheng, Y., & Li, S. (2021) · IEEE Access · doi:10.1109/access.2021.3100683 · Cited by 58
dos Santos, C. H., Gabriel, G. T., do Amaral, J. V. S., Montevechi, J. A. B., & de Queiroz, J. A. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07543-z · Cited by 71
Metadata
- Authors
- Tao, F., & Zhang, M.
- Affiliations
- Beihang University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 20418-20427
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2757110387
- Cited by
- 1,397
- References
- 40
- Citations by year
- 2026: 155 · 2025: 179 · 2024: 178 · 2023: 232 · 2022: 207 · 2021: 180 · 2020: 135 · 2019: 90 · 2018: 40 · 2017: 1
- FWCI
- 79.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51522501)
- National Key Research and Development Program of China (2016YFB1101700)
- Beijing Nova Program in China (Z161100004916063)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, smart manufacturing, shop floor, Industry 4.0, cyber-physical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.