2-stack 1D-1R Cross-point Structure with Oxide Diodes as Switch Elements for High Density Resistance RAM Applications
The DOI matches its Crossref record.
Abstract
We have successfully integrated a 2-stack 8×8 array 1D-1R(one diode-one resistor) structure with 0.5um×0.5um cells in order to demonstrate the feasibility of high density stacked RRAM. p-CuOX/n-InZnOXheterojunction thin film was used for the first time as a oxide diode which shows increased current density of two orders over our previous p-NiOx/n-TiOxoxide diode. And Ti-doped NiO was used for the storage node. No limitation to the number of stacks has been observed from our results. Cell and device properties of our cross-point structure 8×8 array are reported. In addition, all fabrication processes were done at room temperature without other dedicated facilities or processes allowing for compatibility with current CMOS technology. Bi-stable switching for 1D-1R memory was demonstrated for our 2-stack cross-point structures showing excellent behavior for both diode and storage nodes. The forward current density for p-CuOX/n-IZOXdiodes was over 104A/cm2, and the operation voltage for the storage node with diode attached was around 3V.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Wong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806
NVSim: A Circuit-Level Performance, Energy, and Area Model for Emerging Nonvolatile Memory
Dong, X., Xu, C., Xie, Y., & Jouppi, N. P. (2012) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2012.2185930 · Cited by 1,217
Resistive Random Access Memory (ReRAM) Based on Metal Oxides
Akinaga, H., & Shima, H. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070830 · Cited by 1,037
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Emerging Memory Technologies: Recent Trends and Prospects
Yu, S., & Chen, P.-Y. (2016) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2016.2546199 · Cited by 555
Ielmini, D. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2167513 · Cited by 551
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010584 · Cited by 389
Beyond von Neumann—logic operations in passive crossbar arrays alongside memory operations
Linn, E., Rosezin, R., Tappertzhofen, S., Böttger, U., & Waser, R. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/30/305205 · Cited by 377
Access devices for 3D crosspoint memory
Burr, G. W., Shenoy, R. S., Virwani, K., Narayanan, P., Padilla, A., Kurdi, B., & Hwang, H. (2014) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4889999 · Cited by 371
An 8 Mb Multi-Layered Cross-Point ReRAM Macro With 443 MB/s Write Throughput
Kawahara, A., Azuma, R., Ikeda, Y., Kawai, K., Katoh, Y., Hayakawa, Y., Tsuji, K., Yoneda, S., Himeno, A., Shimakawa, K., et al. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2215121 · Cited by 310
Oxide-based RRAM materials for neuromorphic computing
Hong, X., Loy, D. J., Dananjaya, P. A., Tan, F., Ng, C., & Lew, W. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2134-6 · Cited by 307
ReRAM: History, Status, and Future
Chen, Y. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2961505 · Cited by 294
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
3-D Memristor Crossbars for Analog and Neuromorphic Computing Applications
Adam, G. C., Hoskins, B. D., Prezioso, M., Merrikh-Bayat, F., Chakrabarti, B., & Strukov, D. B. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2630925 · Cited by 234
Chen, A. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2013.2246791 · Cited by 230
Threshold Selector With High Selectivity and Steep Slope for Cross-Point Memory Array
Song, J., Woo, J., Prakash, A., Lee, D., & Hwang, H. (2015) · IEEE Electron Device Letters · doi:10.1109/led.2015.2430332 · Cited by 169
A computing-in-memory macro based on three-dimensional resistive random-access memory
Huo, Q., Yang, Y., Wang, Y., Lei, D., Fu, X., Ren, Q., Xu, X., Luo, Q., Xing, G., Chen, C., et al. (2022) · Nature Electronics · doi:10.1038/s41928-022-00795-x · Cited by 159
Stack friendly all-oxide 3D RRAM using GaInZnO peripheral TFT realized over glass substrates
Lee, M.-J., Lee, C. B., Kim, S., Yin, H., Park, J., Ahn, S. E., Kang, B. S., Kim, K. H., Stefanovich, G., Song, I., et al. (2008) · 2008 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2008.4796620 · Cited by 36
Self-citationKim, B., Kim, W., Kim, H., Jung, K., Park, W., Seo, B., Joo, M., Lee, K., Hong, K., & Park, S. (2013) · Japanese Journal of Applied Physics · doi:10.7567/jjap.52.04cd05 · Cited by 7
Metadata
- Authors
- Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., Kim, Y.-H., Lee, C.-S., Park, J.-B., Baek, I.-G., & Yoo, I.-K.
- Venue
- 2007 IEEE International Electron Devices Meeting
- Publisher
- IEEE
- Published
- 2007
- Pages
- 771-774
- ISSN
- 0163-1918 (ISSN-L)
- OpenAlex
- W2040094671
- Cited by
- 224
- References
- 0
- FWCI
- 13.59
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.