Silicon carbide benefits and advantages for power electronics circuits and systems
The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Abstract
Silicon offers multiple advantages to power circuit designers, but at the same time suffers from limitations that are inherent to silicon material properties, such as low bandgap energy, low thermal conductivity, and switching frequency limitations. Wide bandgap semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN), provide larger bandgaps, higher breakdown electric field, and higher thermal conductivity. Power semiconductor devices made with SiC and GaN are capable of higher blocking voltages, higher switching frequencies, and higher junction temperatures than silicon devices. SiC is by far the most advanced material and, hence, is the subject of attention from power electronics and systems designers. This paper looks at the benefits of using SiC in power electronics applications, reviews the current state of the art, and shows how SiC can be a strong and viable candidate for future power electronics and systems applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Power semiconductor device figure of merit for high-frequency applications
Baliga, B. J. (1989) · IEEE Electron Device Letters · doi:10.1109/55.43098 · Cited by 1,070 · cited 2×
“SiC, several unipolar and bipolar figures of merit have been proposed [ 17 ], [25]‐[28].”
Background(2007) · Power Systems · doi:10.1201/9781420009231-29 · Cited by 767
Hingorani, N. G. (1995) · IEEE Spectrum · doi:10.1109/6.387140 · Cited by 690 · cited 2×
“transmission lines [5]–[8] all use power devices such as thyristors, GTOs, and diodes.”
BackgroundHingorani, N. G. (1993) · IEEE Spectrum · doi:10.1109/6.206621 · Cited by 646
Optimum semiconductors for high-power electronics
Shenai, K., Scott, R. S., & Baliga, B. J. (1989) · IEEE Transactions on Electron Devices · doi:10.1109/16.34247 · Cited by 617 · cited 1×
“To quantify the performance enhancement possible with SiC, several unipolar and bipolar figures of merit have been proposed [17], [25]–[28].”
BackgroundWide bandgap compound semiconductors for superior high-voltage unipolar power devices
Chow, T. P., & Tyagi, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.297751 · Cited by 487
Self-citationRecent developments of high power converters for industry and traction applications
Bernet, S. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.892825 · Cited by 458 · cited 1×
“voltages up to 6 kV and currents up to 1200 A [1].”
BackgroundSilicon carbide high-power devices
Weitzel, C. E., Palmour, J. W., Carter, C. H., Moore, K., Nordquist, K. K., Allen, S., Thero, C., & Bhatnagar, M. (1996) · IEEE Transactions on Electron Devices · doi:10.1109/16.536819 · Cited by 443
Chung, G. Y., Tin, C. C., Williams, J. R., McDonald, K., Di Ventra, M., Pantelides, S. T., Feldman, L. C., & Weller, R. A. (2000) · Applied Physics Letters · doi:10.1063/1.126167 · Cited by 438
GHANDHI, S. K. (1977) · CERN Document Server (European Organization for Nuclear Research) · Cited by 364
Research works printed but not linked: 6
- Bhalla, 1994, Examination of semiconductors for bipolar power devices, Proc. Inst. Phys. Conf., 621
- Lipkin, N2O processing improves the 4H–SiC : SiO2 interface
- Rupp, 2001, SiC Schottky diodes reach the market, Compound Semiconductor Mag., 7
- High Voltage Diode Data Sheet
- Neudeck, Progress toward high temperature, high power SiC devices, 141, 1
- Benefits of silicon carbide electronics to aircraft
Cited by
Items 201–300 of 558
SiC GTO thyristor model for HVDC interface
Chinthavali, M., Tolbert, L. M., & Ozpineci, B. (2004) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2004.1372897 · Cited by 13
A high efficiency inverter based on SiC MOSFET without externally antiparalleled diodes
Liu, H., Wu, H., Lu, Y., Xing, Y., & Sun, K. (2014) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2014.6803304 · Cited by 13
Modeling and simulation of SiC MOSFET fast switching behavior under circuit parasitics
Chen, Z., & Boroyevich, D. (2010) · doi:10.5555/2020619.2020668 · Cited by 13
Comparison and evaluation of common mode EMI filter topologies for GaN-based motor drive systems
Morris, C. T., Han, D., & Sarlioglu, B. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468282 · Cited by 13
“WBG devices, such as silicon carbide (SiC) MOSFETs and gallium nitride (GaN) HEMTs, have been researched and studied in a variety of applications and have been shown to reduce weight and increase efficiency [3], [4].”
BackgroundAlmasoudi, F. M., Alatawi, K. S., & Matin, M. A. (2016) · North American Power Symposium (NAPS) · doi:10.1109/naps.2016.7747970 · Cited by 13
“Boost DC-DC converters offer the optimal solution in a PV micro-inverter system where low current ripple and high conversion ratio are achieved [14]-[19].”
BackgroundKondo, T., Akazawa, Y., & Iwata, N. (2019) · Japanese Journal of Applied Physics · doi:10.7567/1347-4065/ab43b7 · Cited by 13
Lai, L., Zhang, R., Cheng, K., Xia, Z., Wei, C., Wei, K., Luo, W., & Liu, X. (2020) · Electronics · doi:10.3390/electronics9091540 · Cited by 13
“Traditional DC-DC converters are mostly implemented in the process of Si MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) with extremely low RON (on-state resistance) and high efficiency performance over hundreds of kilohertz [2–7] However, they can not operate at very high switching frequency with desirable…”
BackgroundLTCC Embedding of SiC Power Devices for High Temperature Applications over 400 °C
Bayer, B., Groccia, M., Bach, H. L., Bayer, C. F., Schletz, A., Lenz, C., & Ziesche, S. (2020) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc48849.2020.9229859 · Cited by 13
“Suitable packaging approaches are necessary to compensate that cost to realize the commercial use of SiC in novel applications [3].”
BackgroundA 650V/60A Gate Driver Integrated Wire-bondless Multichip GaN Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Hassan, M. U., Mirza, A. B., Yuan, Z., Huitink, D. R., & Luo, F. L. (2021) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg51384.2021.9494257 · Cited by 13
“With the recent inventions and development in device technologies using wide band-gap (WBG) materials, high efficient power conversion is becoming readily available [1-4].”
BackgroundLiu, T., Ma, R., Li, S. L., Tao, J., Wang, Z., Wu, H., Yu, Y., Cheng, Z., & Hu, S. (2024) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2024.3479201 · Cited by 12
“…merits of comprehensive characteristics, such as a higher breakdown voltage, higher thermal conductivity, lower specific ON -resistance, and so on [1], [2], silicon-carbide metal– oxide semiconductor field-effect transistor (SiC MOSFET) has been attracting more attention in the aerospace industry.”
Stress and crack dynamics in nanosecond laser slicing of silicon carbide
Wu, W., Yu, X., Li, B., Xiu, X., Zheng, Y., & Zhang, R. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.163052 · Cited by 13
Uruma, T., Satoh, N., & Yamamoto, H. (2017) · Japanese Journal of Applied Physics · doi:10.7567/jjap.56.08lb05 · Cited by 12
Lee, J.-A., Ann, S., Sim, D. H., & Lee, B. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773781 · Cited by 12
Replacing silicon IGBTs with SiC IGBTs in medium voltage wind energy conversion systems
Dey, R., & Nath, S. (2016) · India International Conference on Power Electronics (IICPE) · doi:10.1109/iicpe.2016.8079408 · Cited by 12
Design and Optimization of 650V/60A Double-Sided Cooled Multichip GaN Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Mirza, A., Hassan, M., Yuan, Z., Huitink, D., & Luo, F. (2021) · 2021 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec42165.2021.9487307 · Cited by 11
SiC and GaN Power Semiconductor Devices
Gachovska, T. K., & Hudgins, J. L. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99216-9.00039-1 · Cited by 11
Yu, X., Lin, Y.-X., Mitrović, I. Z., Hall, S., Liang, J., Chao, D.-S., Liu, M. Y., Yang, X., Huang, Y., Yen, T., et al. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3490614 · Cited by 12
Witulski, A. F., Ball, D. R., Johnson, R. A., Galloway, K. F., Sternberg, A. L., Alles, M. L., Reed, R. A., Schrimpf, R. D., Hutson, J. M., Javanainen, A., et al. (2020) · Materials science forum · doi:10.4028/www.scientific.net/msf.1004.1066 · Cited by 11
“These silicon carbide (SiC) power devices have excellent electrical and thermal characteristics [1], in many ways due to the higher critical electric field of silicon carbide, which is seven to eight times greater than the critical field of silicon, depending on the SiC polytype.”
BackgroundAn investigation of angle effect on heavy ion induced single event effect in SiC MOSFET
Yan, X., He, Z., Chen, Q. Y., Hu, P. P., Gao, S., Zhao, S., Cai, C., Ye, B., Zhao, P., Sun, Y., et al. (2022) · Microelectronics Reliability · doi:10.1016/j.microrel.2022.114696 · Cited by 11
Power conversion systems for modern ac–dc power systems
Badrzadeh, B. (2011) · European Transactions on Electrical Power · doi:10.1002/etep.611 · Cited by 11
Step-Double-Zone-JTE for SiC Devices with Increased Tolerance to JTE Dose and Surface Charges
Huang, Y., Wang, Y., Kuang, X., Wang, W., Tang, J., & Sun, Y. (2018) · Micromachines · doi:10.3390/mi9120610 · Cited by 11
Overview of Silicon Carbide Power Devices for Aircraft Electrical Systems
Leuchter, J., Bořil, J., & Blasch, E. (2018) · IEEE/AIAA Digital Avionics Systems Conference (DASC) · doi:10.1109/dasc.2018.8569861 · Cited by 11
A Novel Embedded Sensor for Partial Discharge Detection in Inverter-Fed Machines
Ogundiran, Y. L., Griffo, A., Sundeep, S., & Wang, J. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3177172 · Cited by 11
Rajaguru, P., Lu, H., Bailey, C., Gonzalez, J. A. O., & Alatise, O. M. (2016) · Microelectronics Reliability · doi:10.1016/j.microrel.2016.12.002 · Cited by 11
“Power electronic devices for switching applications based on wide band gapmaterials such SiC and GaN offer better performance on operating voltage, switching speed and on resistance compared to Si material [4,5].”
BackgroundEvaluation of Power Devices for Automotive Hybrid and 42V Based Systems
Campbell, R., & Rajashekara, K. (2004) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2004-01-1682 · Cited by 11
Sachdev, N., & Bhat, A. K. S. (2018) · International Conference on Power, Instrumentation, Control and Computing (PICC) · doi:10.1109/picc.2018.8384740 · Cited by 11
“Therefore, SiC MOSFET offers advantages over conventional silicon devices with higher efficiency reducing the system size and weight [11].”
BackgroundElectron-phonon coupling in semiconductors at high electronic temperatures
Medvedev, N. A. (2023) · Physical review. B./Physical review. B · doi:10.1103/physrevb.108.144305 · Cited by 10
The outlook for SiC vertical JFET technology
Bhalla, A., Li, X., Alexandrov, P., & Dries, J. C. (2013) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2013.6695558 · Cited by 10
“Silicon Carbide (SiC) power switching devices have great promise for increasing the power density, frequency and high temperature capabilities beyond what is possible with silicon technology in both discrete and power module platforms, which is enabled by the excellent material characteristics of SiC [1, 2].”
BackgroundBarhate, V., Agrawal, K. S., Patil, V., Patil, S. R., & Mahajan, A. M. (2018) · International Journal of Modern Physics B · doi:10.1142/s021797921840074x · Cited by 10
High-Power Pulsed Evaluation of High-Voltage SiC N-GTO
Ogunniyi, A. A., O’Brien, H., Ryu, S., & Richmond, J. (2019) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda46397.2019.8998904 · Cited by 10
“Essential attributes of SiC includes: wide bandgap, high critical field, high thermal conductivity, high Young’s Modulus, and high saturation velocity [1-4].”
BackgroundApplication study of the benefits for using silicon-carbide versus silicon in power modules
Wood, R. J. K., & Salem, T. E. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6166173 · Cited by 10
“Abstract— On a device-level, the benefits of Silicon-Carbide (SiC) versus Silicon (Si) power components have been documented over the past several years [1-5].”
BackgroundA Wire Bondless SiC Switching Cell With a Vertically Integrated Gate Driver
Seal, S., Wallace, A. K., Dearien, A., Farnell, C., & Mantooth, H. A. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2974981 · Cited by 10
“S ILICON carbide power devices are superior to conventional silicon power devices in several ways [1]–[5].”
BackgroundTemperature dependency of MOSFET device characteristics in 4H- and 6H-silicon carbide (SiC)
Hasanuzzarnan, M., ISLAM, S. K., Tolbert, L. M., & Alam, M. (2004) · International Semiconductor Device Research Symposium · doi:10.1109/isdrs.2003.1272029 · Cited by 10
“6H-SiC material system provides enhanced device performance compared to 4H-SiC counterpart for lateral MOSFET.”
MethodHuque, M. A., Tolbert, L. M., Blalock, B. J., & ISLAM, S. K. (2026) · IMAPSource Proceedings · doi:10.4071/001c.161842 · Cited by 10
“…of the wide bandgap (WBG) semiconductors offer a lower intrinsic carrier concentration (10-35 orders of magnitude), a higher electric breakdown field (4-20 times), a higher thermal conductivity (3-13 times), and a larger saturated electron drift velocity (2-2.5 times), when compared to silicon [8].”
InfluentialFailure Characterization of Discrete SiC MOSFETs under Forward Power Cycling Test
Huang, T., Singh, B. P., Liu, Y., & Norrga, S. (2024) · Energies · doi:10.3390/en17112557 · Cited by 10
Spontaneous Parametric Down‐Conversion in 4H‐SiC Integrated Platform
Shi, X., Baiju, A. A., Dhyani, V., Wang, S., Mohanraj, S. S., Leong, V., Sun, J., Deng, B., Zhang, J., Wang, Y., et al. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202500104 · Cited by 10
Ozgur, M., & Huff, M. A. (2017) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.4994785 · Cited by 9
Johnson, R. A., Witulski, A. F., Sierawski, B. D., Ball, D. R., Galloway, K. F., Sternberg, A. L., Reed, R. A., Schrimpf, R. D., Alles, M. L., Lauenstein, J., et al. (2023) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2023.3258142 · Cited by 9
Switching performance comparison of the SiC JFET and the SiC JFET/Si MOSFET cascode configuration
Rodríguez, A., Fernandez, M., Hernando, M. M., Lamar, D. G., Arias, M., & Sebastián, J. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646739 · Cited by 9
“The advantages of these devices with respect to the silicon (Si) counterpart can be summarized in higher electrical breakdown field (eight times higher) and thermal conductivity (three times higher) [1-3].”
BackgroundPushpakaran, B. N., Bayne, S. B., & Ogunniyi, A. A. (2016) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2016.2636214 · Cited by 9
Kuo, C.-W., Wang, T.-W., Chen, L.-C., Tu, C., Hsiao, Y., & Chen, P.-H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3522068 · Cited by 8
Yıldırım, D., Akşit, M. H., Cadirci, I., & Ermiş, M. (2022) · Electronics · doi:10.3390/electronics11091438 · Cited by 9
Large-area regular periodic surface structures on 4H-SiC induced by defocused femtosecond laser
He, Z., Xie, X., Long, J., Liu, T., Zhang, Z., & Lai, Q. (2022) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ac81e6 · Cited by 8
Flip-Chip Low inductive and EMC optimized PCB Power Module
Ali, F. A., Jeannin, P., Avenas, Y., & Lefranc, P. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509349 · Cited by 8
Electron irradiation effects and room-temperature annealing mechanisms for SiC MOSFETs
He, M., Dong, P., Ma, Y., Yu, Q., Cao, S., Huang, W., Xu, Q., Zhang, S., Huang, M., Li, Y., et al. (2024) · Results in Physics · doi:10.1016/j.rinp.2024.107672 · Cited by 8
SiC Schottky power diode modelling in SPICE
Zarebski, J., & Dąbrowski, J. (2005) · IEEE International Conference on Electronics, Circuits and Systems (ICECS) · doi:10.1109/icecs.2005.4633594 · Cited by 8
“[1,2, 3 ]. As results from the cited papers, silicon carbide has an order of magnitude higher breakdown electric field and an electron mobility only about 20% lower (for 4H-SiC) than silicon.”
BackgroundA design of multi-mode excitation source for optical thermography nondestructive sensing
Zhu, Y., Gao, B., Wu, S., Zhang, Y., Wang, M., Woo, W. L., & Liao, Y. (2018) · Infrared Physics & Technology · doi:10.1016/j.infrared.2018.08.023 · Cited by 8
Isotopic Enriched and Natural SiC Junction Barrier Schottky Diodes Under Heavy Ion Irradiation
Roed, K., Eriksen, D. Ø., Ceccaroli, B., Martinella, C., Javanainen, A., Reshanov, S. A., & Massetti, S. (2022) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2022.3173061 · Cited by 8
Synergistic Effect of Negative Bias Instability and Total Ionizing Dose on SiC MOSFETs
Tang, Y. Y., Wang, L., Cai, X., Hu, D., Dong, B., Ding, L., Gao, Y., Xia, R., Gao, M., Wang, S., et al. (2023) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2023.3273172 · Cited by 8
Investigations of SiC merged pin Schottky diodes under isothermal and non‐isothermal conditions
Zarebski, J., & Dąbrowski, J. (2010) · International Journal of Numerical Modelling Electronic Networks Devices and Fields · doi:10.1002/jnm.771 · Cited by 8
“INTRODUCTION Silicon carbide (SiC) is the most promising, modern semiconductor material for manufacturing power devices due to its promising features and parameter values [1].”
BackgroundWu, D., Xiao, C., Zhang, H., & Liang, W. (2017) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2017.8080769 · Cited by 8
Interleaved, Switched Inductor and High-Gain Wide Bandgap Based Boost Converter Proposal
Marroquí, D., Garrigos, A., Torres, C., Orts, C., Blanes, J. M., & Gutiérrez, R. (2021) · Energies · doi:10.3390/en14040800 · Cited by 8
Implementation of a fully integrated 50 kW inverter using a SiC JFET based six-pack power module
Han, T. J., Nagashima, J. M., Kim, S. J., Kulkarni, S., & Barlow, F. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6064192 · Cited by 8
“Silicon Carbide (SiC) power devices have shown promise as the next generation advancement in power electronics for decades due to the advantages of SiC compared to silicon as well known; 10X higher breakdown voltage, low switching losses variation over temperature changes, 4X better thermal conductivity, and 2-3X high…”
BackgroundModeling and Analysis of Power Device Losses for Induction Cooker Applications
Kim, J., Kim, S.-G., Oh, W.-H., & Park, S.-M. (2018) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems.2018.8549433 · Cited by 8
“These devices have advantages in high breakdown field strength, high thermal conductivity, and high-speed switching compared to conventional Si-based devices [2], [3].”
BackgroundLuo, R., Duan, Y., Luo, T., Chang, Y., Shi, W., Xu, X., Zhuang, J., Zhang, G., & Fan, J. (2025) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2025.3566690 · Cited by 7
Study on magnetism, swelling and their correlation of SiC ceramics under nickel ion irradiation
Zhang, W., Li, J., Cui, J., Tian, Y., Cheng, Z., Gao, P., Tai, P., Chang, H., & Sun, J. (2025) · Journal of the American Ceramic Society · doi:10.1111/jace.20654 · Cited by 7
Gualandri, F., & Kuzior, A. (2024) · Sustainability · doi:10.3390/su16125143 · Cited by 7
Zhang, Q., Wang, J., & Poon, A. W. O. (2024) · Photonics · doi:10.3390/photonics11080701 · Cited by 8
Study on gate oxide reliability of SiC power MOSFETs under 300 MeV proton irradiation
Xu, J., Wei, Y., Zhang, D., Yu, X., Liang, X., Guo, Q., Xiang, Y., & Feng, J. (2025) · Microelectronics Reliability · doi:10.1016/j.microrel.2025.115750 · Cited by 7
Power Amplifiers Based on SiC Technology for MHD Mode Control in Fusion Experiments
Gaio, E., Ferro, A., Novello, L., & Matsukawa, M. (2016) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2016.2569451 · Cited by 7
“The critical electric field and the electron drift velocity at high electric fields (saturated velocity) are higher than those of Si, and this allows for higher frequency of operation [28], [29].”
BackgroundState of the art and emerging solid-state power devices in the perspective of more electric aircraft
Raciti, A., Rizzo, S. A., Salerno, N., Susinni, G., Buccella, C., Cecati, C., & Tinari, M. (2018) · AEIT International Annual Conference · doi:10.23919/aeit.2018.8577345 · Cited by 7
“Moreover, the charge stored as minority carriers is reduced and the bipolar devices speed rises considering the higher electron velocity [49].”
BackgroundAnalysis of Ruggedness of 4H-SiC Power MOSFETs with Various Doping Parameters
Jang, M.-S., Jeong, J.-H., & Lee, J. (2022) · Applied Sciences · doi:10.3390/app13010427 · Cited by 7
Formation and Luminescence of Single Oxygen Impurities on the Surface of SiC Nanocrystals
Granlie, J. D., Hobbie, E. K., & Kilin, D. S. (2023) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.3c01182 · Cited by 7
Avalanche ruggedness and failure mode of SiC trench MOSFETs
Tuncay, S., Zeng, G., Falco, G. D., & Basler, T. (2023) · Microelectronics Reliability · doi:10.1016/j.microrel.2023.115196 · Cited by 7
High-Temperature Electronic Materials: Silicon Carbide and Diamond
Willander, M., Friesel, M., Wahab, Q.-U., & Straumal, B. B. (2006) · Springer handbooks · doi:10.1007/978-0-387-29185-7_24 · Cited by 7
Theoretical analysis and experimental investigation of high frequency bidirectional CPT system
Voglitsis, D., Venugopal, P., Todorčević, T., & Bauer, P. (2014) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2014.6861771 · Cited by 7
“These devices can offer advantages in terms of efficiency improvements for power electronics converters, as they achieve fast switching, lower switching losses and higher power density [14],[15].”
BackgroundIwata, N., & Kondo, T. (2020) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/abb759 · Cited by 7
Analysis and Design of a High-Efficiency SiC MOSFET 6-Phase Boost Rectifier
Nezio, G. D., Benedetto, M. D., Lidozzi, A., & Solero, L. (2022) · Energies · doi:10.3390/en15062175 · Cited by 7
SPICE modelling of power Schottky diodes
Zarebski, J., & Dąbrowski, J. (2008) · International Journal of Numerical Modelling Electronic Networks Devices and Fields · doi:10.1002/jnm.688 · Cited by 7
Novel layout design of 4H-SiC merged PiN Schottky diodes leading to improved surge robustness
陈, J.-H. 嘉. C., 王, Y. 颖. W., Fei, X.-X., Bao, M.-T., & 曹, F. 菲. C. (2022) · Chinese Physics B · doi:10.1088/1674-1056/acad6b · Cited by 7
Electronic packaging of SiC MOSFET-based devices for reliable high temperature operation
Yin, L., Chen, C.-P., Kapusta, C., & Ghandi, R. (2015) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2015.7168847 · Cited by 7
Practical considerations of SiC technology for UAV
Leuchter, J., Bořil, J., & Blasch, E. (2016) · IEEE/AIAA Digital Avionics Systems Conference (DASC) · doi:10.1109/dasc.2016.7778014 · Cited by 8
Electro-Optical Modulation in a 4H-SiC Slab Induced by Carrier Depletion in a Schottky Diode
Corte, F. G. D., Giglio, I., Pangallo, G., & Rao, S. (2018) · IEEE Photonics Technology Letters · doi:10.1109/lpt.2018.2823421 · Cited by 7
“5 W cm × K), as well as its dielectric strength (4 × 106 against 2 × 105 V/cm), and electron saturation speed (2 × 107 against 1 × 107 cm/s), make this material particularly suitable for high operating temperatures [1], high-voltage [2], high power [3], [4] applications, with positive effect on the efficiency of elect…”
BackgroundComparison of Impedance Measurement Techniques for Extracting Parasitic Inductance of SiC MOSFETs
Liu, T., Feng, Y., Zhou, Y., Ning, R., Wong, T. T. Y., & Shen, Z. J. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558077 · Cited by 7
“Compared with the silicon counterparts, WBG devices can operate at higher voltage, higher temperature and higher switching frequency [1]-[3].”
BackgroundGao, Z., Guo, Q. W., Ren, N., & Sheng, K. (2020) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia49671.2020.9360260 · Cited by 7
“INTRODUCTION Although silicon carbide (SiC) MOSFETs show great electrical properties due to material advantages [1,2], certain ruggedness issues of SiC MOSFETs remain to be fully understood and quantified to minimize over-design practices.”
Specific features of SiC-IGBT with 13kV switching
Ueno, M., Miyake, M., & Miura-Mattausch, M. (2012) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2012.6229073 · Cited by 7
“4H-SiC has about 10 times higher breakdown voltage than silicon, and 4H-SiC has almost equivalent dielectric constant to silicon according to Table I [2], [3].”
BackgroundRahmani, F., Quispe, D., Agarwal, T., & Barzegaran, M. (2020) · Munich Personal RePEc Archive (Ludwig Maximilian University of Munich) · Cited by 7
Quantifying Implantation-Induced Damage and Point Defects with Multislice Electron Ptychography
Kim, J. H., Gilgenbach, C., Bhat, A., & LeBeau, J. M. (2025) · Nano Letters · doi:10.1021/acs.nanolett.5c00170 · Cited by 6
Han, D., & Sarlioglu, B. (2015) · Journal of Power Electronics · doi:10.6113/jpe.2015.15.6.1489 · Cited by 6
“SiC devices have been extensively studied in the past decade because of their relatively high level of maturity [15]-[17].”
BackgroundShimin, V. V., Shah, V. A., & Lokhande, M. M. (2016) · IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems · doi:10.1109/icpeices.2016.7853101 · Cited by 6
“Processing techniques, technological constraints etc., also plays a significant role in determining the device performance [2].”
BackgroundProton induced radiation effect of SiC MOSFET under different bias
张, H. 鸿. Z., 郭, H.-X. 红. G., 雷, Z.-F. 志. L., 彭, C. 超. P., 马, W.-Y. 武. M., 王, D. 迪. W., 孙, C.-H. 常. S., 张, F.-Q. 凤. Z., 张, Z.-G. 战. Z., 杨, Y. 业. Y., et al. (2023) · Chinese Physics B · doi:10.1088/1674-1056/acbe31 · Cited by 6
Liu, T., Wang, Y., Ma, R., Wu, H., Tao, J., Yu, Y., Cheng, Z., & Hu, S. (2023) · Micromachines · doi:10.3390/mi14051074 · Cited by 6
“Introduction Recently, silicon carbide (SiC) power devices have gained more and more popularity in the automotive, renewable energy, high-speed railway, and aerospace industries, due to their outstanding comprehensive characteristics, such as a higher breakdown voltage (BV), higher thermal conductivity, lower specific…”
BackgroundLarge thermoelectric effects in p-SiC/p-Si and n-SiC/p-Si heterojunctions
Guzmán, P., Dinh, T., Nguyen, T., Foisal, A. R. M., Nguyen, H., Nguyen, Q., Nguyen, T., Phan, H., Tanner, P. G., WOODFIELD, P. L., et al. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.108493 · Cited by 6
“…free times τ h and τ e between scattering events via μ e = e τ e m ∗ e (5) where the mean free time τ between scattering events is calculated by [3] where S is the cross-sectional area of the scatter; V th is the mean speed of the electrons (thermal velocity); and N s is the number of scatters…”
Physical modelling of large area 4H-SiC PiN diodes
Bryant, A. T., Jennings, M. R., Parker-Allotey, N.-A., Mawby, P., Pérez‐Tomás, A., Brosselard, P., Godignon, P., Jordà, X., Millan, J., Palmer, P., et al. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316233 · Cited by 6
“In [11] the operation of an ultra fast Si PiN diode was compared to that of a SiC PiN diode within a boost converter and hybrid single-phase 1 kW inverter.”
MethodHigh efficiency three level transformerless inverter based on SiC MOSFETs for PV applications
Almasoudi, F. M., Alatawi, K. S., & Matin, M. A. (2017) · IEEE International Conference on Electro Information Technology · doi:10.1109/eit.2017.8053437 · Cited by 6
“WBG power devices have the advantages of achieving high switching frequency and low switching and conduction losses compared with conventional Si power switches which will enhance the performance of PV inverters [13], [14].”
BackgroundCharacteristics of 21H-SiC Thin Film-Based Schottky Barrier Diodes Using TiN Contacts
Akshara, P. C., Rajaram, G., & Krishna, M. G. (2021) · Journal of Electronic Materials · doi:10.1007/s11664-020-08597-7 · Cited by 6
An Active Gate Driver for Suppressing the Current Oscillation of SiC MOSFET
Li, Z., Chai, J., Lu, H., & Li, Y. (2021) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec50170.2021.9510361 · Cited by 6
4H-SiC Schottky diode radiation hardness assessment by IBIC microscopy
Vittone, E., Olivero, P., Jakšić, M., & Pastuović, Ž. (2023) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/j.nimb.2023.01.009 · Cited by 6
“2 eV), large breakdown electric field (2 MV cm), high electron mobility (900 cm(2) V s) and high thermal conductivity (400 W m K) [5].”
Efficiency improvement using a hybrid power module in 6.6kW Non-Isolated On-Vehicle Charger
Ouwerkerk, D., Han, T. J., & Preston, J. (2012) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2012.6422719 · Cited by 7
“Silicon Carbide (SiC) is a wide band-gap semiconductor technology that offers high temperature capability and fast switching speeds [2].”
BackgroundSimulation study of a mixed terminal structure for 4H-SiC merged PiN/Schottky diode
Huang, J. Z., Lü, H.-L., Zhang, Y., Zhang, Y., Tang, X., Chen, F., & Song, Q. (2011) · Chinese Physics B · doi:10.1088/1674-1056/20/11/118401 · Cited by 6
Investigation of 1.2 kV SiC MOSFETs for hard- and soft-switching converters
Awwad, A. E., Birgel, P., & Dieckerhoff, S. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6911009 · Cited by 6
“A calorimetric power loss measurement method is realized in order to achieve a good measurement accuracy, and the results are compared to the electrical measurements.”
Gavrilenko, V., Lefebvre, S., Hlioui, S., Boucenna, N., Costa, F., & Леонов, А. А. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099363 · Cited by 6
“Their higher-temperature performance will permit operation in much harsher environments; higher switching frequencies will lead to substantial reduction of size and weight, hence, contributing to lower cost and higher portability [22].”
BackgroundShen, P., Wang, Y., Li, X., Yang, J., & Zheng, L. (2023) · Microelectronics Reliability · doi:10.1016/j.microrel.2023.114931 · Cited by 6
Poobalan, B., Moon, J. H., Kim, S., Joo, S., Bahng, W., Kang, I. H., Kim, N., & Cheong, K. Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.08.131 · Cited by 6
Simulation and Optimization of SiC Field Effect Transistors
Bertilsson, K. (2004) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 6
Heavy-Ion Effects in SiC Power MOSFETs With Different Gate Oxide Thicknesses
Liu, Y., Zhao, S., Zhai, P., Zhang, T., Yu, D., & Liu, J. (2025) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2025.3593241 · Cited by 5
Unifying Model for Estimating SELC/SEB in SiC Power Devices Using a Nonlinear Ion Track Resistance
Ball, D. R., Kosier, S. L., Galloway, K. F., Witulski, A. F., Sternberg, A. L., Sengupta, A., Islam, S., Alles, M. L., Reed, R. A., Hutson, J. M., et al. (2026) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2026.3666825 · Cited by 5
Wafer bonding of SiC-SiC and SiC-Si by modified suface activated bonding method
Mu, F., Fujino, M., Suga, T., Takahashi, Y., Nakazawa, H., & Iguchi, K. (2015) · International Conference on Electronics Packaging and iMAPS All Asia Conference (ICEP-IAAC) · doi:10.1109/icep-iaac.2015.7111073 · Cited by 5
“9W/cm·K, 3-4 times larger than silicon’s) offer the SiC devices higher operating frequency, heat spreading velocity and power density [3][4].”
BackgroundKicin, S., & Hamers, J. S. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6634351 · Cited by 5
4H-SiC Planar MESFET for Microwave Power Device Applications
Na, H. J., Jung, S. Y., Moon, J. H., Yim, J. H., Song, H. K., Lee, J. B., & Kim, H. J. (2005) · JSTS Journal of Semiconductor Technology and Science · Cited by 5
Metadata
- Authors
- Elasser, A., & Chow, T. P.
- Affiliations
- General Electric (United States) (US)
- Rensselaer Polytechnic Institute (US)
- ORCID
- Chow, T.P.
- Venue
- Proceedings of the IEEE
- Published
- 2002-06
- Volume
- 90
- Issue
- 6
- Pages
- 969-986
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2141390704
- Cited by
- 537
- References
- 78
- Citations by year
- 2026: 23 · 2025: 35 · 2024: 34 · 2023: 40 · 2022: 39 · 2021: 34 · 2020: 24 · 2019: 33 · 2018: 34 · 2017: 36 · 2016: 36 · 2015: 26 · 2014: 18 · 2013: 31 · 2012: 14
- FWCI
- 7.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Proceedings of the IEEE (publishedVersion)
- Funders
- Defense Advanced Research Projects Agency
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Ga2O3 and related materials
- Keywords
- silicon carbide, wide bandgap semiconductors, gallium nitride, power semiconductor devices, power electronics, switching frequency, thermal conductivity, breakdown field, blocking voltage, junction temperature, silicon limitation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.