Silicon carbide benefits and advantages for power electronics circuits and systems
The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Abstract
Silicon offers multiple advantages to power circuit designers, but at the same time suffers from limitations that are inherent to silicon material properties, such as low bandgap energy, low thermal conductivity, and switching frequency limitations. Wide bandgap semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN), provide larger bandgaps, higher breakdown electric field, and higher thermal conductivity. Power semiconductor devices made with SiC and GaN are capable of higher blocking voltages, higher switching frequencies, and higher junction temperatures than silicon devices. SiC is by far the most advanced material and, hence, is the subject of attention from power electronics and systems designers. This paper looks at the benefits of using SiC in power electronics applications, reviews the current state of the art, and shows how SiC can be a strong and viable candidate for future power electronics and systems applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Power semiconductor device figure of merit for high-frequency applications
Baliga, B. J. (1989) · IEEE Electron Device Letters · doi:10.1109/55.43098 · Cited by 1,070 · cited 2×
“SiC, several unipolar and bipolar figures of merit have been proposed [ 17 ], [25]‐[28].”
Background(2007) · Power Systems · doi:10.1201/9781420009231-29 · Cited by 767
Hingorani, N. G. (1995) · IEEE Spectrum · doi:10.1109/6.387140 · Cited by 690 · cited 2×
“transmission lines [5]–[8] all use power devices such as thyristors, GTOs, and diodes.”
BackgroundHingorani, N. G. (1993) · IEEE Spectrum · doi:10.1109/6.206621 · Cited by 646
Optimum semiconductors for high-power electronics
Shenai, K., Scott, R. S., & Baliga, B. J. (1989) · IEEE Transactions on Electron Devices · doi:10.1109/16.34247 · Cited by 617 · cited 1×
“To quantify the performance enhancement possible with SiC, several unipolar and bipolar figures of merit have been proposed [17], [25]–[28].”
BackgroundWide bandgap compound semiconductors for superior high-voltage unipolar power devices
Chow, T. P., & Tyagi, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.297751 · Cited by 487
Self-citationRecent developments of high power converters for industry and traction applications
Bernet, S. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.892825 · Cited by 458 · cited 1×
“voltages up to 6 kV and currents up to 1200 A [1].”
BackgroundSilicon carbide high-power devices
Weitzel, C. E., Palmour, J. W., Carter, C. H., Moore, K., Nordquist, K. K., Allen, S., Thero, C., & Bhatnagar, M. (1996) · IEEE Transactions on Electron Devices · doi:10.1109/16.536819 · Cited by 443
Chung, G. Y., Tin, C. C., Williams, J. R., McDonald, K., Di Ventra, M., Pantelides, S. T., Feldman, L. C., & Weller, R. A. (2000) · Applied Physics Letters · doi:10.1063/1.126167 · Cited by 438
GHANDHI, S. K. (1977) · CERN Document Server (European Organization for Nuclear Research) · Cited by 364
Research works printed but not linked: 6
- Bhalla, 1994, Examination of semiconductors for bipolar power devices, Proc. Inst. Phys. Conf., 621
- Lipkin, N2O processing improves the 4H–SiC : SiO2 interface
- Rupp, 2001, SiC Schottky diodes reach the market, Compound Semiconductor Mag., 7
- High Voltage Diode Data Sheet
- Neudeck, Progress toward high temperature, high power SiC devices, 141, 1
- Benefits of silicon carbide electronics to aircraft
Cited by
High-temperature electronics - a role for wide bandgap semiconductors?
Neudeck, P. G., Okojie, R. S., & Chen, L.-Y. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021571 · Cited by 1,050
“As discussed in [9], [13], [60], and [61], much lighter doping ( ) and much larger depletion width () are required for a junction to block higher voltage.”
BackgroundHigh-power wind energy conversion systems: State-of-the-art and emerging technologies
Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2378692 · Cited by 991
“The two wide band-gap materials for power applications are Gallium Nitride (GaN) and Silicon Carbide (SiC) [251]–[255].”
BackgroundHVDC Circuit Breakers: A Review Identifying Future Research Needs
Franck, C. M. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2095889 · Cited by 909
“and are intensively investigated [90], [91].”
Electric Drive Technology Trends, Challenges, and Opportunities for Future Electric Vehicles
Husain, I., Ozpineci, B., Islam, M. S., Gurpinar, E., Su, G.-J., Yu, W., Chowdhury, S., Xue, L., Rahman, D., & Sahu, R. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3046112 · Cited by 608
“SiC devices have been identified as the key solutions for high-switching-frequency, high-voltage, and high-temperature applications since the beginning of the century [18].”
BackgroundElectrical Power Generation in Aircraft: Review, Challenges, and Opportunities
Madonna, V., Giangrande, P., & Galea, M. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2834142 · Cited by 636
“In particular, higher switching frequencies contribute to the reduction of filtering passive component size [107], while less series-connected modules (than traditional silicon-based counterpart) would be adopted for managing higher voltages [106].”
BackgroundOswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
“The material properties of SiC enable practical unipolar power devices (MOSFET, JFET, and Schottky diode) to be created at blocking voltages approximately an order of magnitude greater than is possible in silicon [4].”
BackgroundChakraborty, S., Vu, H.-N., Hasan, M. M., Tran, D.-D., Baghdadi, M. E., & Hegazy, O. (2019) · Energies · doi:10.3390/en12081569 · Cited by 384
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
“Hereafter comes with the SiC devices which are more efficient than Si devices [40], [42], [43].”
BackgroundA Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310
Silicon carbide and diamond for high temperature device applications
Willander, M., Friesel, M., Wahab, Q.-U., & Straumal, B. (2006) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-005-5137-4 · Cited by 292
Single-Event Burnout Mechanisms in SiC Power MOSFETs
Witulski, A. F., Ball, D. R., Galloway, K. F., Javanainen, A., Lauenstein, J.-M., Sternberg, A. L., & Schrimpf, R. D. (2018) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2018.2849405 · Cited by 196
“Compared to silicon, SiC has higher critical breakdown electric field and higher thermal conductivity [1].”
BackgroundHan, D., Noppakunkajorn, J., & Sarlioglu, B. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2323193 · Cited by 184
“In addition, SiC has a significantly lower intrinsic carrier concentration, resulting in a much higher temperature capability [8].”
BackgroundCharacterization and Modeling of High-Switching-Speed Behavior of SiC Active Devices
Chen, Z. (2009) · VTechWorks (Virginia Tech) · Cited by 189
Revolution of Electric Vehicle Charging Technologies Accelerated by Wide Bandgap Devices
Li, S., Lu, S., & Mi, C. C. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2021.3071977 · Cited by 163
“Table 1 Material Properties and FOM Comparison [16]–[18]”
BackgroundA Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232265 · Cited by 151
“W ITH the advent of wide bandgap (WBG) semiconductor devices, high-speed efficient power conversion (EPC) is no longer a vision but a reality [1], [2], [3], [4].”
BackgroundEvaluation of the switching characteristics of a gallium-nitride transistor
Danilovic, M., Chen, Z., Wang, R., Luo, F., Boroyevich, D., & Mattavelli, P. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6064128 · Cited by 144
Ball, D. R., Hutson, J. M., Javanainen, A., Lauenstein, J., Galloway, K. F., Johnson, R. A., Alles, M. L., Sternberg, A. L., Sierawski, B. D., Witulski, A. F., et al. (2019) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2019.2955922 · Cited by 149
“SiC power devices have higher breakdown electric fields and thermal conductivity, with significantly lower ON-state resistance [1].”
BackgroundTheoretical limit estimation of lateral wide band-gap semiconductor power-switching device
Saito, W., Omura, I., Ogura, T., & Ohashi, H. (2004) · Solid-State Electronics · doi:10.1016/j.sse.2003.10.003 · Cited by 144
Role of Wide Bandgap Materials in Power Electronics for Smart Grids Applications
Ballestín-Fuertes, J., Muñoz-Cruzado-Alba, J., Sanz-Osorio, J., & Laporta-Puyal, E. (2021) · Electronics · doi:10.3390/electronics10060677 · Cited by 105
Comparison Between Output CM Chokes for SiC Drive Operating at 20- and 200-kHz Switching Frequencies
Han, D., Morris, C. T., Lee, W., & Sarlioglu, B. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2672919 · Cited by 124
“higher switching speed, and higher temperature capabilities, compared to conventional silicon (Si) based devices [1]– [3].”
BackgroundSingle-Pulse Avalanche Mode Robustness of Commercial 1200 V/80 mΩ SiC MOSFETs
Kelley, M. D., Pushpakaran, B. N., & Bayne, S. B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2621099 · Cited by 108
Technology and Applications of Wide Bandgap Semiconductor Materials: Current State and Future Trends
Chaudhary, O. S., Denai, M. A., Refaat, S. S., & Pissanidis, G. (2023) · Energies · doi:10.3390/en16186689 · Cited by 125
“…power losses in the devices. and have hindered the progress in achieving high efficiency, reliability, and compact factor in power applications The on-state resistance increases in proportion with the blocking voltage, which makes them unsuitable for high-voltages applications above 600 V [4].”
BackgroundA 60-kW 3-kW/kg Five-Level T-Type SiC PV Inverter With 99.2% Peak Efficiency
Shi, Y., Wang, L., Xie, R., Shi, Y., & Li, H. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2701762 · Cited by 112
Seal, S., & Mantooth, H. (2017) · Energies · doi:10.3390/en10030341 · Cited by 100
“SiC power devices have the potential to impact power density at all levels in the package—a reduction in the size and number of power devices, a reduction in the size and number of passives for filtering circuits, and a reduction in the volume of thermal management [1].”
BackgroundFujikura, H., Konno, T., Yoshida, T., & Horikiri, F. (2017) · Japanese Journal of Applied Physics · doi:10.7567/jjap.56.085503 · Cited by 93
Overview of Wide/Ultrawide Bandgap Power Semiconductor Devices for Distributed Energy Resources
Mazumder, S. K., Voss, L. F., Dowling, K. M., Conway, A. M., Hall, D., Kaplar, R., Pickrell, G. W., Flicker, J., Binder, A. T., Chowdhury, S., et al. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3277828 · Cited by 98
“Since traditional device packaging becomes a limiting factor in fully harnessing the benefits offered by the advanced PSDs, improved and advanced packaging structures are necessary to bridge the gap between WBG devices and their applications [2], [3], [4], [5], [6].”
Background4H SiC Epitaxial Growth with Chlorine Addition
Via, F. L., Galvagno, G., Fóti, G., Mauceri, M., Leone, S., Pistone, G., Abbondanza, G., Veneroni, A., Masi, M., Valente, G. L., et al. (2006) · Chemical Vapor Deposition · doi:10.1002/cvde.200506465 · Cited by 93
Papanasam, E., Prashanth Kumar, B., Chanthini, B., Manikandan, E., & Agarwal, L. (2022) · Silicon · doi:10.1007/s12633-022-01998-9 · Cited by 91
“Factors such as high carrier mobility in the direction of c-axis and low dopant ionization energy make 4H-SiC most fascinating polytype for power electronics applications [21].”
BackgroundHan, D., & Sarlioglu, B. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2406760 · Cited by 88
“Conventional silicon (Si)-based power devices have seen tremendous improvements over the past 60 years, but their performances are limited by the physical properties of Si material [1].”
BackgroundPower-switching applications beyond silicon: Status and future prospects of SiC and GaN devices
Dimitrijev, S., Han, J., Moghadam, H. A., & Aminbeidokhti, A. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.89 · Cited by 86
Zhang, Y., Ravishankar, J., Fletcher, J., Li, R., & Han, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.108 · Cited by 90
Silicon carbide for high resolution X-ray detectors operating up to 100°C
Bertuccio, G., Casiraghi, R., Cetronio, A., Lanzieri, C., & Nava, F. (2004) · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment · doi:10.1016/j.nima.2003.11.413 · Cited by 81
3-D Wire Bondless Switching Cell Using Flip-Chip-Bonded Silicon Carbide Power Devices
Seal, S., Glover, M. D., & Mantooth, H. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2782226 · Cited by 81
“S iC power devices are capable of operating at much higher switching frequencies as compared with their silicon (Si) counterparts [1]–[5].”
BackgroundNaseem, M. B., Kim, H. S., Lee, J.-H., Kim, C. H., & In, S. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c00684 · Cited by 79
Assessing the Impact of SiC MOSFETs on Converter Interfaces for Distributed Energy Resources
Carr, J., Hotz, D., Balda, J. C., Mantooth, H. A., Ong, A., & Agarwal, A. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005500 · Cited by 78
“The emerging technology of silicon carbide (SiC) devices shows a great deal of promise in all these areas, having significant improvements over Si in the areas of voltage blocking, switching frequency, losses, and thermal characteristics [2-4].”
MethodActive defects in MOS devices on 4H-SiC: A critical review
Moghadam, H. A., Dimitrijev, S., Han, J., & Haasmann, D. (2016) · Microelectronics Reliability · doi:10.1016/j.microrel.2016.02.006 · Cited by 77
Hu, J., Wang, J., Burgos, R. P., Wen, B., & Boroyevich, D. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2943742 · Cited by 72
“converters [1], [2].”
A review of WBG and Si devices hybrid applications
Zhang, L., Zheng, Z., & Lou, X. (2021) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2021.000012 · Cited by 74
10-kV SiC MOSFET-Based Boost Converter
Wang, J., Zhou, X., Li, J., Zhao, T., Huang, A. Q., Callanan, R., Husna, F., & Agarwal, A. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2031915 · Cited by 71
“The developed SiC power MOSFETs with high-frequency operation capability make it feasible that dc/dc converters based power electronic systems have a smaller size and a high power density [ 2 ], [4].”
BackgroundEffects of Breakdown Voltage on Single-Event Burnout Tolerance of High-Voltage SiC Power MOSFETs
Ball, D. R., Galloway, K. F., Johnson, R. A., Alles, M. L., Sternberg, A. L., Witulski, A. F., Reed, R. A., Schrimpf, R. D., Hutson, J. M., & Lauenstein, J. (2021) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2021.3079846 · Cited by 67
Solid State Transformers: A Critical Review of Projects with Relevant Prototypes and Demonstrators
Cervero, D., Fotopoulou, M. C., Muñoz-Cruzado-Alba, J., Rakopoulos, D. C., Stergiopoulos, F., Nikolopoulos, N., Voutetakis, S. S., & Sanz, J. F. (2023) · Electronics · doi:10.3390/electronics12040931 · Cited by 70
Pittini, R., Zhang, Z., & Andersen, M. A. E. (2013) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia.2013.6579102 · Cited by 66
“The introduction of power devices based on wide band gap semiconductors such as Silicon Carbide (SiC) and Gallium Nitride (GaN), has allowed to increase the efficiency and power density of switch mode power supplies (SMPS) [1].”
BackgroundChen, B., Matsuhata, H., Sekiguchi, T., Ichinoseki, K., & Okumura, H. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.09.010 · Cited by 64
A wide bandgap silicon carbide (SiC) gate driver for high-temperature and high-voltage applications
Lamichhane, R., Ericson, N., Frank, S. S., Britton, C. L., Marlino, L. D., Mantooth, A., Francis, M., Shepherd, P., Glover, M. D., Peréz, S., et al. (2014) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2014.6856064 · Cited by 63
“SiC is a wide bandgap semiconductor material with larger bandgap, lower leakage currents, higher breakdown electric field, and higher thermal conductivity, which promotes higher switching frequencies for high power applications, higher temperature operation, and results in higher power density devices relative to Si […”
BackgroundMahdavi, M., Kimiagar, S., & Abrinaei, F. (2020) · Crystals · doi:10.3390/cryst10030164 · Cited by 64
Advanced ceramics in energy storage applications: Batteries to hydrogen energy
Randhawa, K. S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113122 · Cited by 66
Mitra, B., Chowdhury, B., & Manjrekar, M. D. (2018) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2018.5274 · Cited by 69
“Research is being made on the development of semiconductor switches with wide band gap elements having higher dielectric strength, but has a more compact size [83, 84].”
Application of Total Ionizing Dose Radiation Test Standards to SiC MOSFETs
Yu, Q., Ali, W., Cao, S., Wang, H., Lv, H., Sun, Y., Mo, R., Wang, Q., Mei, B., Sun, J., et al. (2021) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2021.3135123 · Cited by 61
Performance evaluation of SiC power MOSFETs for high-temperature applications
Chen, Z., Yao, Y., Danilovic, M., & Boroyevich, D. (2012) · 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC) · doi:10.1109/epepemc.2012.6397198 · Cited by 56
UIS failure mechanism of SiC power MOSFETs
Fayyaz, A., Castellazzi, A., Romano, G., Riccio, M., Irace, A., Urresti, J., & Wright, N. (2016) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2016.7799921 · Cited by 60
“As compared to Silicon (Si), features such as faster switching speeds, lower on-state losses, lower off-state leakage currents, higher power density per unit area, higher thermal conductivity and smaller die sizes are some of the exciting benefits of SiC which could not be realized using the existing Si device technol…”
BackgroundFujikura, H., Konno, T., Kimura, T., Narita, Y., & Horikiri, F. (2020) · Applied Physics Letters · doi:10.1063/5.0014528 · Cited by 59
Switching Performance Comparison of the SiC JFET and SiC JFET/Si MOSFET Cascode Configuration
Rodríguez, A., Díaz, M. F., Lamar, D. G., de Azpeitia, M. A. P., Hernando, M. M., & Sebastián, J. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283144 · Cited by 64
Gate oxide reliability assessment of a SiC MOSFET for high temperature aeronautic applications
Santini, T., Morand, S., Miller, F., Phung, L. V., & Allard, B. (2013) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia.2013.6579125 · Cited by 60
A 200 °C Universal Gate Driver Integrated Circuit for Extreme Environment Applications
Huque, M. A., ISLAM, S. K., Tolbert, L. M., & Blalock, B. J. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2187934 · Cited by 56
“Table I lists physical properties of typical semiconductor materials [10], [11] for power electronics devices.”
BackgroundJohnson, R. A., Witulski, A. F., Ball, D. R., Galloway, K. F., Sternberg, A. L., Reed, R. A., Schrimpf, R. D., Alles, M. L., Lauenstein, J., Javanainen, A., et al. (2019) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2019.2947866 · Cited by 55
“These characteristics allow for device designs with higher current ratings, lower ON-state resistance, and higher breakdown voltages for a given die size compared to silicon device equivalents [1].”
BackgroundSilicon carbide wafer bonding by modified surface activated bonding method
Suga, T., Mu, F., Fujino, M., Takahashi, Y., Nakazawa, H., & Iguchi, K. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.030214 · Cited by 54
Effects of Bias on the Irradiation and Annealing Responses of 4H-SiC MOS Devices
Zhang, C. X., Zhang, E. X., Fleetwood, D. M., Schrimpf, R. D., Dhar, S., Ryu, S., Shen, X., & Pantelides, S. T. (2011) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2011.2168424 · Cited by 54
“D UE to its wide band gap, silicon carbide is attractive for high power and high temperature applications [1], [2].”
BackgroundCharacterization and modeling of silicon carbide power devices and paralleling operation
Cui, Y., Chinthavali, M. S., Xu, F., & Tolbert, L. M. (2012) · 2012 IEEE International Symposium on Industrial Electronics · doi:10.1109/isie.2012.6237089 · Cited by 52
“These properties make SiC power devices a worthy substitution for their Si counterparts for high voltage, high temperature, and high frequency applications [3-6].”
BackgroundParasitic Capacitive Couplings in Medium Voltage Power Electronic Systems: An Overview
Kjærsgaard, B. F., Liu, G., Nielsen, M. R., Wang, R., Dalal, D. N., Aunsborg, T. S., Jørgensen, J. K., Yan, Z., Jacobsen, J., Wu, R. L., et al. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3269582 · Cited by 55
“system benefits in more efficient and compatible designs [7], [8], [9], [10], [11], [12], [13], [14], [15], [16].”
BackgroundNew Resonant Gate Driver Circuit for High-Frequency Application of Silicon Carbide MOSFETs
Chennu, J. V. P. S., Maheshwari, R., & Li, H. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2677307 · Cited by 53
“2677307 silicon because of their superior properties [4]–[11].”
BackgroundDalal, D. N., Christensen, N. H., Jørgensen, A. B., Sonderskov, S. D., Bęczkowski, S., Uhrenfeldt, C., & Munk‐Nielsen, S. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099274 · Cited by 55
“Introduction Medium voltage (MV) silicon carbide (SiC) MOSFETs are emerging as promising devices due to their capability of blocking higher voltages and switching at higher frequencies with increased thermal conductivity compared to their Silicon (Si) counterparts [1].”
BackgroundTrinh, X. T., Szász, K., Hornos, T., Kawahara, K., Suda, J., Kimoto, T., Gali, Á., Janzén, E., & Són, N. T. (2013) · Physical Review B · doi:10.1103/physrevb.88.235209 · Cited by 52
A Comprehensive Study on the Avalanche Breakdown Robustness of Silicon Carbide Power MOSFETs
Fayyaz, A., Romano, G., Urresti, J., Riccio, M., Castellazzi, A., Irace, A., & Wright, N. (2017) · Energies · doi:10.3390/en10040452 · Cited by 52
A SiC CMOS Linear Voltage Regulator for High-Temperature Applications
Murphree, R. C., Roy, S., Ahmed, S., Barlow, M., Rahman, A., Francis, A. M., Holmes, J., Mantooth, H. A., & Di, J. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2914169 · Cited by 52
“footprint improves power density, reliability, and system efficiency due to fewer parasitic elements [4]–[6].”
BackgroundImpacts of gate bias and its variation on gamma-ray irradiation resistance of SiC MOSFETs
Murata, K., Mitomo, S., Matsuda, T., Yokoseki, T., Makino, T., Onoda, S., Takeyama, A., Ohshima, T., Okubo, S., Tanaka, Y., et al. (2016) · physica status solidi (a) · doi:10.1002/pssa.201600446 · Cited by 50
Epitaxial MgO as an alternative gate dielectric for SiC transistor applications
Posadas, A. B., Walker, F. J., Ahn, C., Goodrich, T. L., Cai, Z., & Ziemer, K. S. (2008) · Applied Physics Letters · doi:10.1063/1.2944865 · Cited by 52
Shi, D., Chen, Y., Li, Z., Dong, S., Li, L., Hou, M., Liu, H., Zhao, S., Chen, X., Wong, C., et al. (2022) · Small Methods · doi:10.1002/smtd.202200329 · Cited by 49
Comparison of Si, SiC, and GaN based Isolation Converters for Onboard Charger Applications
Su, G.-J. (2018) · 2018 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558063 · Cited by 43
“These WBG devices’ ability to operate with reduced conduction and switching losses over higher frequencies and higher temperatures minimizes requirements for the passive components and reduces cooling demands [2-6].”
BackgroundTemperature dependency of MOSFET device characteristics in 4H- and 6H-silicon carbide (SiC)
Hasanuzzaman, M., ISLAM, S. K., Tolbert, L. M., & Alam, M. T. (2004) · Solid-State Electronics · doi:10.1016/j.sse.2004.05.029 · Cited by 48
Sengupta, A., Ball, D. R., Sternberg, A. L., Islam, S., Senarath, A. S., Reed, R. A., McCurdy, M. W., Zhang, E. X., Hutson, J. M., Alles, M. L., et al. (2024) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2024.3357129 · Cited by 47
“excellent material, electrical, and physical characteristics [1]; however, commercial SiC power devices, such as Schottky diodes and metal oxide semiconductor field-effect transistors (MOSFETs), may be susceptible to single-event effects (SEEs) in these radiation environments.”
BackgroundPhysical Properties of Silicon Carbide
Kimoto, T., & Cooper, J. A. (2014) · Wiley eBooks · doi:10.1002/9781118313534.ch2 · Cited by 47
Tang, G., Chai, T. C., & Zhang, X. (2019) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2018.2860998 · Cited by 47
Efficiency comparison of SiC and Si-based bidirectional DC-DC converters
Han, D., Noppakunkajorn, J., & Sarlioglu, B. (2013) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2013.6574511 · Cited by 48
“In addition, SiC has a significantly lower intrinsic carrier concentration, resulting in a much higher temperature capability [2].”
BackgroundGüzel, T., & Çolak, A. B. (2021) · Superlattices and Microstructures · doi:10.1016/j.spmi.2021.106864 · Cited by 46
Optimization of SiC UMOSFET Structure for Improvement of Breakdown Voltage and ON-Resistance
Bharti, D., & Islam, A. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2779482 · Cited by 45
“EXCELLENT properties of silicon carbide (SiC) make it an outstanding candidate for a variety of applications, including high-frequency, high-temperature, and high-power device owing to its high-saturation velocity, high-critical field, and wide bandgap [1], [2].”
BackgroundFailure Estimates for SiC Power MOSFETs in Space Electronics
Galloway, K. F., Witulski, A. F., Schrimpf, R. D., Sternberg, A. L., Ball, D. R., Javanainen, A., Reed, R. A., Sierawski, B. D., & Lauenstein, J. (2018) · Aerospace · doi:10.3390/aerospace5030067 · Cited by 45
“These devices, in comparison to silicon devices, have advantages in breakdown voltage (~10× Si), low on-resistance (~1/100 Si), high temperature operation (~3× Si) and high thermal conductivity (~10× Si) [1].”
BackgroundAhsan, S. A., Ghosh, S., Khandelwal, S., & Chauhan, Y. S. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2654264 · Cited by 45
“Material systems based on wide bandgap semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN), offer great advantages over their Si-based counterparts [1], [2].”
BackgroundEnhanced photoconductivity in CdS/betanin composite nanostructures
Susha, N., Kalarikkal, N., & Nair, S. S. (2018) · RSC Advances · doi:10.1039/c7ra13116j · Cited by 43
Wang, Y., Lin, M., Li, X., Wu, X., Yang, J., Bao, M.-T., Yu, C., & Cao, F. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2933026 · Cited by 43
“S ILICON carbide (SiC) is a promising material for the high-power, high-frequency, and high-temperature applications due to its physical and electrical properties [1]–[3].”
BackgroundBody diode reliability investigation of SiC power MOSFETs
Fayyaz, A., Romano, G., & Castellazzi, A. (2016) · Microelectronics Reliability · doi:10.1016/j.microrel.2016.07.044 · Cited by 42
“These features also make power MOSFETs a famous choice for synchronous rectification within inverters [3].”
Background18 kW three phase inverter system using hermetically sealed SiC phase-leg power modules
Zhang, H., Tolbert, L. M., Han, J. H., Chinthavali, M., & Barlow, F. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433365 · Cited by 42
“Research on SiC power electronics has revealed their better efficiency compared to Si power electronics due to the significant reduction in both conduction and switching losses [7-10].”
BackgroundRahman, A., Roy, S., Murphree, R. C., Kotecha, R. M., Addington, K., Abbasi, A., Mantooth, H. A., Francis, A. M., Holmes, J., & Di, J. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2584599 · Cited by 42
“Current ICs based on standard Si technology do not perform satisfactorily at temperatures above 200 °C and ICs on SOI technology can only support operation up to 300 °C [9].”
BackgroundInfluentialA 100-kW SiC Switched Tank Converter for Transportation Electrification
Ni, Z., Li, Y., Liu, C., Wei, M., & Cao, D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2954801 · Cited by 44
“better efficiency and higher temperature capability compared with the Si counterparts [27]–[30].”
BackgroundJyothi, I., Seo, M.-W., Janardhanam, V., Shim, K.-H., Lee, Y.-B., Ahn, K., & Choi, C. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.12.143 · Cited by 41
TCAD Device Modelling and Simulation of Wide Bandgap Power Semiconductors
Lophitis, N., Arvanitopoulos, A. E., Perkins, S., & Antoniou, M. (2018) · InTech eBooks · doi:10.5772/intechopen.76062 · Cited by 41
“Material properties of significant power semiconductors normalized against Si, data taken form [1, 2].”
BackgroundReview of SiC MOSFET based three-phase inverter lifetime prediction
Ni, Z., Lyu, X., Yadav, O. P., & Cao, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7930819 · Cited by 40
Du, Y., Wang, J., Wang, G., & Huang, A. Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2288642 · Cited by 40
“For bipolar devices, less minority carrier charge storage can significantly increase the switching frequency [2], [4].”
BackgroundJohnson, R. A., Witulski, A. F., Ball, D. R., Galloway, K. F., Sternberg, A. L., Zhang, E. X., Ryder, L. D., Reed, R. A., Schrimpf, R. D., Kozub, J. A., et al. (2019) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2019.2922883 · Cited by 40
Sung, H., Qiang, T., Yao, Z., Li, Y., Wu, Q., Lee, H., Park, B.-D., Lim, W.-S., Park, K.-H., & Wang, C. (2017) · Scientific Reports · doi:10.1038/s41598-017-04389-y · Cited by 39
Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Hassan, M. U., Mirza, A. B., Hossain, M. M., Rashid, A. U., Chen, Y., Luo, F. L., et al. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3173585 · Cited by 39
“With the advent of wide-band gap semiconductor devices, high-density efficient power conversion system is no longer a vision but reality [1-4].”
BackgroundAthwer, A., & Darwish, A. (2023) · Energies · doi:10.3390/en16145324 · Cited by 42
“In this journey, the junction-gate field-effect transistor (JFETs) and the bipolar junction transistors (BJTs) have been replaced with metal–oxide semiconductor field effect transistors (MOSFETs) and insulated gate bipolar transistors (IGBTs) based on silicon (Si), which are the most-common transistors currently [23].”
BackgroundSiddiqua, P., Hadi, W. A., Shur, M. S., & O’Leary, S. K. (2015) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-015-3055-7 · Cited by 38
Efficiency Improvement of Grid Inverters With Hybrid Devices
Wang, Y., Chen, M., Yan, C., & Xu, D. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2881115 · Cited by 38
Yuan, Z., Deshpande, A., Narayanasamy, B., Peng, H., Emon, A. I., Whitt, R., Nafis, B. M., Luo, F., & Huitink, D. R. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913071 · Cited by 38
“faster switching speeds and lower switching loss over Siliconbased devices at the same die size [12].”
BackgroundA Comparison of Silicon and Silicon Carbide MOSFET Switching Characteristics
Ong, A., Carr, J., Balda, J. C., & Mantooth, A. (2007) · IEEE Region 5 Technical Conference · doi:10.1109/tpsd.2007.4380318 · Cited by 37
Gate Capacitance Characterization of Silicon Carbide and Silicon Power mosfets Revisited
Stark, R., Tsibizov, A., Kovacevic-Badstuebner, I., Ziemann, T., & Großner, U. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3164360 · Cited by 36
Characterization of a high temperature multichip SiC JFET-based module
Xu, F., Jiang, D., Wang, J., Wang, F., Tolbert, L. M., Han, T. J., & Kim, S. J. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6064088 · Cited by 35
“Research on SiC power devices has revealed their better efficiency compared to Si power devices due to the reduction in both conduction and switching losses [1-3].”
BackgroundElectrical Integration of SiC Power Devices for High-Power-Density Applications
Chen, Z. (2013) · VTechWorks (Virginia Tech) · Cited by 56
Adoption of wide bandgap technology in hybrid/electric vehicles-opportunities and challenges
Han, D., Li, S., Lee, W., & Sarlioglu, B. (2017) · 2017 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2017.7993332 · Cited by 34
“In the meantime, a great effort has been led by the Department of Energy (DOE) and some key manufacters and universities to develop and improve the wide bandgap (WBG) semiconductor devices for power conversion systems, so that energy efficient, smallsize, and low-cost power electronics are made possible [4][6].”
BackgroundAlam, M., Kumar, K., & Dutta, V. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1778-4 · Cited by 34
Metadata
- Authors
- Elasser, A., & Chow, T. P.
- Affiliations
- General Electric (United States) (US)
- Rensselaer Polytechnic Institute (US)
- ORCID
- Chow, T.P.
- Venue
- Proceedings of the IEEE
- Published
- 2002-06
- Volume
- 90
- Issue
- 6
- Pages
- 969-986
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2141390704
- Cited by
- 537
- References
- 78
- Citations by year
- 2026: 23 · 2025: 35 · 2024: 34 · 2023: 40 · 2022: 39 · 2021: 34 · 2020: 24 · 2019: 33 · 2018: 34 · 2017: 36 · 2016: 36 · 2015: 26 · 2014: 18 · 2013: 31 · 2012: 14
- FWCI
- 7.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Proceedings of the IEEE (publishedVersion)
- Funders
- Defense Advanced Research Projects Agency
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Ga2O3 and related materials
- Keywords
- silicon carbide, wide bandgap semiconductors, gallium nitride, power semiconductor devices, power electronics, switching frequency, thermal conductivity, breakdown field, blocking voltage, junction temperature, silicon limitation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.