Silicon carbide benefits and advantages for power electronics circuits and systems
The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Abstract
Silicon offers multiple advantages to power circuit designers, but at the same time suffers from limitations that are inherent to silicon material properties, such as low bandgap energy, low thermal conductivity, and switching frequency limitations. Wide bandgap semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN), provide larger bandgaps, higher breakdown electric field, and higher thermal conductivity. Power semiconductor devices made with SiC and GaN are capable of higher blocking voltages, higher switching frequencies, and higher junction temperatures than silicon devices. SiC is by far the most advanced material and, hence, is the subject of attention from power electronics and systems designers. This paper looks at the benefits of using SiC in power electronics applications, reviews the current state of the art, and shows how SiC can be a strong and viable candidate for future power electronics and systems applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Power semiconductor device figure of merit for high-frequency applications
Baliga, B. J. (1989) · IEEE Electron Device Letters · doi:10.1109/55.43098 · Cited by 1,070 · cited 2×
“SiC, several unipolar and bipolar figures of merit have been proposed [ 17 ], [25]‐[28].”
Background(2007) · Power Systems · doi:10.1201/9781420009231-29 · Cited by 767
Hingorani, N. G. (1995) · IEEE Spectrum · doi:10.1109/6.387140 · Cited by 690 · cited 2×
“transmission lines [5]–[8] all use power devices such as thyristors, GTOs, and diodes.”
BackgroundHingorani, N. G. (1993) · IEEE Spectrum · doi:10.1109/6.206621 · Cited by 646
Optimum semiconductors for high-power electronics
Shenai, K., Scott, R. S., & Baliga, B. J. (1989) · IEEE Transactions on Electron Devices · doi:10.1109/16.34247 · Cited by 617 · cited 1×
“To quantify the performance enhancement possible with SiC, several unipolar and bipolar figures of merit have been proposed [17], [25]–[28].”
BackgroundWide bandgap compound semiconductors for superior high-voltage unipolar power devices
Chow, T. P., & Tyagi, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.297751 · Cited by 487
Self-citationRecent developments of high power converters for industry and traction applications
Bernet, S. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.892825 · Cited by 458 · cited 1×
“voltages up to 6 kV and currents up to 1200 A [1].”
BackgroundSilicon carbide high-power devices
Weitzel, C. E., Palmour, J. W., Carter, C. H., Moore, K., Nordquist, K. K., Allen, S., Thero, C., & Bhatnagar, M. (1996) · IEEE Transactions on Electron Devices · doi:10.1109/16.536819 · Cited by 443
Chung, G. Y., Tin, C. C., Williams, J. R., McDonald, K., Di Ventra, M., Pantelides, S. T., Feldman, L. C., & Weller, R. A. (2000) · Applied Physics Letters · doi:10.1063/1.126167 · Cited by 438
GHANDHI, S. K. (1977) · CERN Document Server (European Organization for Nuclear Research) · Cited by 364
Research works printed but not linked: 6
- Bhalla, 1994, Examination of semiconductors for bipolar power devices, Proc. Inst. Phys. Conf., 621
- Lipkin, N2O processing improves the 4H–SiC : SiO2 interface
- Rupp, 2001, SiC Schottky diodes reach the market, Compound Semiconductor Mag., 7
- High Voltage Diode Data Sheet
- Neudeck, Progress toward high temperature, high power SiC devices, 141, 1
- Benefits of silicon carbide electronics to aircraft
Cited by
Items 301–400 of 558
Avalanche Capability Characterization of 1.2 kV SiC Power MOSFETs Compared with 900V Si CoolMOS
Qi, J., Xu, Y., Li, X., Tian, K., Wang, M., Zhou, L., & Wang, X. (2019) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2019.8807671 · Cited by 5
“The SiC based power devices are regarded as ideal candidate switching devices in high power conversion system, due to the excellent thermal and electrical properties of SiC material compared with traditional Si material, such as higher thermal conductivity, lager bandgap and higher electron saturation velocity [1-3].”
BackgroundZheng, G., Sun, Y., Liu, S., Su, P., Pei, J., Zuo, R., & Liu, L. (2025) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2025.128108 · Cited by 5
Performance review of state-of-the-art 1.2 kV SiC devices based on experimental figures-of-merit
Ohno, T., Haider, M., & Mirić, S. (2025) · e+i Elektrotechnik und Informationstechnik · doi:10.1007/s00502-025-01318-0 · Cited by 5
A 3D Structure of Single-Sided Cooling Power Module with Low Thermal Resistance and Low Inductance
Hisamochi, H., Notake, K., Takahashi, Y., & Yamaguchi, K. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977396 · Cited by 5
Physics based electro-thermal transient simulation of 4H-SiC JBS diode using Silvaco ATLAS
Pushpakaran, B. N., Bayne, S. B., & Ogunniyi, A. A. (2015) · IEEE International Pulsed Power Conference (PPC) · doi:10.1109/ppc.2015.7296926 · Cited by 5
“conductivity due to superior material properties [1, 2].”
Modelling Power Schottky Diodes
Zarebski, J., & Dąbrowski, J. (2006) · International Conference on Modern Problems of Radio Engineering, Telecommunications and Computer Science · doi:10.1109/tcset.2006.4404454 · Cited by 5
Reliability Analysis of SiC MOSFET Power Module for More Electric Aircraft Motor Drive Applications
O'Donnell, S., Wheeler, P. W., & Castellazzi, A. (2018) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars-itec.2018.8607615 · Cited by 5
Arvanitopoulos, A. E., Li, F., Jennings, M. R., Perkins, S., Gyftakis, K. N., Mawby, P., Antoniou, M., & Lophitis, N. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3087667 · Cited by 5
“he demands of modern applications in power electronics make the Silicon- (Si) based power devices lag, mainly due to the moderate critical electric field value of the material [1], [2].”
BackgroundDesign of a 1.2 kV SiC MOSFET with Buried Oxide for Improving Switching Characteristics
Yoon, H., & Seok, O. (2024) · Electronics · doi:10.3390/electronics13050962 · Cited by 5
Direct bonding of SiC by the suface activated bonding method
Suga, T., Mu, F., Fujino, M., Takahashi, Y., Nakazawa, H., & Iguchi, K. (2014) · International Conference on Electronics Packaging (ICEP) · doi:10.1109/icep.2014.6826707 · Cited by 5
“9W/cm·K, 3-4 times larger than silicon’s) offer the SiC devices higher operating frequency, heat spreading velocity and power density [3-5].”
BackgroundLagudu, U. R. K. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100165-3.00007-3 · Cited by 5
Study on the Application of Gallium Nitride Transistors in Power Electronics
Duarte, R. R., Ferreira, G. F., Costa, M. A. D., Barriquello, C. H., & Alonso, J. M. (2017) · Eletrônica de Potência · doi:10.18618/rep.2018.1.2734 · Cited by 5
“Materials with bandgap larger than 3 eV are commonly called wide bandgap semiconductors [6], [10], [24], [25].”
BackgroundLC Impedance Source Bi-Directional Converter with Reduced Capacitor Voltages
Raveendhra, D., Dhaouadi, R., Rehman, H., & Mukhopadhyay, S. (2020) · Electronics · doi:10.3390/electronics9071062 · Cited by 5
“The high density can be achieved by increasing the switching frequency [6] due to the reduction in reactive components size.”
BackgroundTransport process and energy loss of heavy ions in silicon carbide
Zhang, H., Guo, H., Pan, X., Lei, Z.-F., Zhang, F., Gu, Z.-Q., Liu, Y., Ju, A.-A., & Ouyang, X. (2021) · Acta Physica Sinica · doi:10.7498/aps.70.20210503 · Cited by 5
Fatima, K., Rafique, M., Soomro, A. M., & Kumar, M. (2022) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.202200266 · Cited by 5
Comparison of Efficiency for Synchronous Buck Converter Using Si and WBG Materials
Krovi, K. P. (2022) · International Conference on Mechatronics - Mechatronika · doi:10.1109/me54704.2022.9983108 · Cited by 5
“And for the applications which are to be operated for more than 150oC for military zones need devices to be with higher voltage, frequency, and power density [7].”
BackgroundLee, J.-A., Heo, H., Sim, D. H., Jo, H.-W., Son, W.-J., & Lee, B. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131368 · Cited by 5
“As the silicon carbide (SiC) MOSFETs, which are WBG devices advantageous for fast-switching speed, are applied to high power converters, the noise effect on the grid increases because of high di/dt and dv/dt [2], [5], [6].”
MethodTripathy, P. R., Mukherjee, M., & Pati, S. P. (2012) · International Journal of Microwave and Wireless Technologies · doi:10.1017/s1759078712000244 · Cited by 5
“On the other hand, silicon carbide (SiC) is now been accepted as an attractive semiconductor material for realization of high-power, hightemperature, and high-frequency electronic devices because of its favorable properties such as wide band gap, high breakdown field, high thermal conductivity, and high saturation ele…”
BackgroundLi, Y., Deng, X., Liu, Y., Zhao, Y., Li, C., Chen, X., & Zhang, B. (2015) · Journal of Semiconductors · doi:10.1088/1674-4926/36/9/094003 · Cited by 5
Packaging of Wide Bandgap Power Semiconductors using Simulation-based Design
Jørgensen, A. B. (2019) · VBN Forskningsportal (Aalborg Universitet) · doi:10.54337/aau311246578 · Cited by 5
Shan, C., He, Z., Wang, E., Zhao, X., Sui, Z., & Cao, J. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.164453 · Cited by 4
Azam, M., Su, W., & Wang, J. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.113995 · Cited by 8
Seal, S., Glover, M. D., & Mantooth, H. A. (2016) · Additional Conferences (Device Packaging HiTEC HiTEN & CICMT) · doi:10.4071/2016cicmt-tp2b1 · Cited by 5
Singh, B. P., Li, S., Choudhury, K. R., Norrga, S., & Nee, H. (2023) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime56861.2023.10100764 · Cited by 4
“SiC offers higher breakdown voltage, higher switching frequency, superior thermal conductivity, and can operate at higher junction temperature [7].”
BackgroundSpampinato, V., Auditore, A., Tuccitto, N., Vitale, R., Bellocchi, G., Galliano, F., Rascunà, S., Arena, G., & Licciardello, A. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.160719 · Cited by 4
A Novel 4H-SiC Split-Gate CIMOSFET With Improved Electrical Performance Using N-Type Buried Layer
Xie, F., Dong, Y., Li, F., Wei, J., & Xu, F. (2024) · IEEE Electron Device Letters · doi:10.1109/led.2024.3522503 · Cited by 4
“…thermal conductivity compared to silicon material, which is an excellent material for the preparation of high-voltage power electronic devices, and has broad application prospects in the field of high-power, high-temperature, high voltage, and irradiation-resistant power electronics [1], [2].”
Efficiency comparison between SiC- and Si-based active neutral-point clamped converters
Nicolás-Apruzzese, J., Maset, E., Busquets‐Monge, S., Esteve, V., Bordonau, J., Calle-Prado, A., & Jordan, J. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125550 · Cited by 4
“Compared to Si material, some inherent properties of SiC material are: higher electric breakdown field (eight times higher), lower intrinsic carrier concentration, higher thermal conductivity (three times higher), and larger saturated electron drift speed [1].”
BackgroundA 72 kVA very fast four-quadrant converter based on hybrid Si-SiC IGBTs
Ferro, A., Gaio, E., Tomasini, M., Milani, P., Massarelli, E., Matsukawa, M., & Novello, L. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309216 · Cited by 4
“Hybrid Si-SiC IGBT modules or full-SiC MOSFET modules [7][8] would be able to operate at 30 kHz and more, due to their low switching losses.”
BackgroundRodríguez, A., Vázquez, A., Lamar, D. G., & Hernando, M. M. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647362 · Cited by 4
MODELING OF POWER SEMICONDUCTOR DEVICES
Gachovska, T. K. (2012) · Lincoln (University of Nebraska) · Cited by 4
Isolated DC-DC converter based on Silicon Carbide for advanced multilevel topologies
Kortazar, I., Larrazabal, I., & Mendizabal, L. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8098944 · Cited by 4
EVALUATION OF INVERTER TOPOLOGIES FOR HIGH POWER/MEDIUM VOLTAGE AIRCRAFT APPLICATIONS
Klumpner, C., & Khera, F. A. (2021) · IET conference proceedings. · doi:10.1049/icp.2021.1132 · Cited by 4
“For this reason, it is envisaged that the power converters of future aircraft power systems will have to use exclusively wide bandgap (WBG) materials such as silicon carbide (SiC), a material that was predicted to be suitable for implementing force commutated medium voltage switches for almost 20 years [6].”
BackgroundHamady, S., Beydoun, B., & Morancho, F. (2025) · Electronics · doi:10.3390/electronics14020313 · Cited by 4
Rodriguez, L. A. G., Williams, E., Balda, J. C., & Stewart, C. (2013) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2013.6785582 · Cited by 4
“…SiC devices to Si devices with similar ratings, SiC devices have thermal conductivities three times greater, electric breakdown fields four times greater, and double the amount of wide bandgap energy [2]─[3]; these aspects lead to size reductions and impacts on system costs at higher temperatures.”
BackgroundAnzai, T., Murakami, Y., Sato, S., Tanisawa, H., Hiyama, K., Takahashi, H., Kato, F., & Sato, H. (2015) · Journal of Microelectronics and Electronic Packaging · doi:10.4071/imaps.464 · Cited by 4
“SiC power devices can be operated at high junction temperatures [1, 2].”
BackgroundSimulation Study of Switching-Dependent Device Parameters of High Voltage 4H-SiC GTOs
Ogunniyi, A. A., Schrock, J. A., Hinojosa, M., O’Brien, H., Lelis, A. J., Bayne, S. B., & Ryu, S. (2017) · Materials science forum · doi:10.4028/www.scientific.net/msf.897.575 · Cited by 4
“Silicon carbide (SiC) material properties are extremely desirable for power devices because the wide bandgap and high critical field of SiC enables power devices to have a much smaller drift layer for a given blocking voltage than its silicon counterpart [1-3].”
BackgroundA Comparison of 100 kW SiC DC-DC Converters for Electric Vehicles
Ni, Z., Li, Y., Liu, C., Wei, M., & Cao, D. (2019) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2019.8790618 · Cited by 5
“SiC MOSFET power modules have shown better performance compared with Si counterparts in high-power, high-frequency applications [17]–[20].”
BackgroundComparison of Methods for Switching Loss Estimation in WBG Systems
New, C. D., Lemmon, A. N., DeBoi, B. T., Hontz, M. R., Sellers, A. J., & Khanna, R. (2019) · IEEE Electric Ship Technologies Symposium (ESTS) · doi:10.1109/ests.2019.8847837 · Cited by 4
TCAD evaluation of single-event burnout hardening design for SiC Schottky diodes
Chen, J.-H., Wang, Y., Guo, H., Fei, X.-X., Yu, C., & Bao, M.-T. (2022) · Microelectronics Reliability · doi:10.1016/j.microrel.2022.114865 · Cited by 4
A Novel SiC Trench MOSFET with Self-Aligned N-Type Ion Implantation Technique
Wang, B., Xu, H., Ren, N., Wang, H., Huang, K., & Sheng, K. (2023) · Micromachines · doi:10.3390/mi14122212 · Cited by 4
Pulsed power evaluation and simulation of high voltage 4H-SiC P-Type SGTOs
Ogunniyi, A. A., O’Brien, H., Hinojosa, M., Schrock, J. A., Lacouture, S., Hirsch, E. A., Bayne, S. B., & Ryu, S. (2016) · IEEE Lester Eastman Conference on High Performance Devices · doi:10.1109/lec.2016.7578933 · Cited by 4
“Silicon carbide’s material properties advantages such as a high critical field, high saturation velocity, high thermal conductivity, high energy bandgap, large elastic modules makes it extremely favorable for pulse switching systems and applications [1-4].”
BackgroundShah, K. V. (2020) · Journal of The Institution of Engineers (India) Series B · doi:10.1007/s40031-020-00481-6 · Cited by 4
Power Losses of Silicon Carbide MOSFET in HVDC Application
Chen, H.-J. (2012) · D-Scholarship@Pitt (University of Pittsburgh) · Cited by 4
Silicon Carbide Based Transit Time Devices: The New Frontier in High-power THz Electronics
Mukherjee, M. (2011) · InTech eBooks · doi:10.5772/15537 · Cited by 4
Aw, J. L., Bu, L., Yuan, H. H., & Woo, D. R. M. (2014) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc.2014.7028357 · Cited by 4
“SiC based IC chips can be used as it is known to have better device performance[1] and higher operating temperatures in excess of 600°C[2] when compared to Si-based power electronics devices.”
MethodZarebski, J., Górecki, K., & Dąbrowski, J. (2008) · doi:10.1109/icm.2008.5393829 · Cited by 4
Simulation of conducted EMI in SiC MOSFET buck converters before and after aging
Douzi, S., Tlig, M., Slama, J. B. H., & Kadi, M. (2016) · International Conference on Sciences of Electronics, Technologies of Information and Telecommunications · doi:10.1109/setit.2016.7939861 · Cited by 4
“Thus, silicon carbide power semiconductor switches are the ideal choice for future power static converters [5,6].”
BackgroundProcess modeling for the growth of SiC using PVT and TSSG methods
Ariyawong, K. (2015) · theses.fr (ABES) · doi:10.70675/456a48bez6090z4148zbbb6zf6525efc08e7 · Cited by 4
Behavior of SiC-MOSFETs under temperature and voltage stress
Rescher, G. (2018) · reposiTUm (TU Wien) · doi:10.34726/hss.2018.60783 · Cited by 4
Studies of SiC power devices potential in power electronics for avionic applications
Chen, C. (2016) · theses.fr (ABES) · doi:10.70675/56c4a84azfa6az4987zbec3z4c160ad9ddef · Cited by 9
Deep levels characterizations in SiC to optimize high voltage devices
Zhang, T. (2018) · theses.fr (ABES) · doi:10.70675/6450bcb4z477ez4095z821azfc27da651873 · Cited by 5
Performance analysis of commercial MOSFET packages in Class E converter operating at 2.56 MHz
Nair, U. R., Munk‐Nielsen, S., & Jørgensen, A. B. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099082 · Cited by 3
“The conventional Si based power electronics devices are not capable of operating at such high switching frequencies (> 1 MHz) and transfer the high power level needed for these application and as such these industries continue to rely on the vacuum tube based converters [10].”
BackgroundWen, Z., Peng, S.-P., Shuling, D. E. N. G., Wu, D., Zhiqiang, F. A. N., & Zhang, X. (2025) · Acta Physica Sinica · doi:10.7498/aps.74.20250553 · Cited by 3
Kemerli, U., Moreno, G., Chaudhary, R., Narumanchi, S. V. J., & Joshi, Y. K. (2025) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4069386 · Cited by 3
Comparison of the Single-Event Response for SiC MOSFETs With Linear and Square Cells
Dong, X., Xu, Q., Ma, Y., Huang, M., Huang, W., Yang, N., Wang, J., Fu, C., Yang, Z., Li, Y., et al. (2026) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2025.3648697 · Cited by 3
Analysis of carrier lifetime effects on HV SIC PiN diodes at elevated pulsed switching conditions
Ogunniyi, A. A., O’Brien, H., Hinojosa, M., Cheng, L., Scozzie, C. J., Pushpakaran, B. N., Lacouture, S., & Bayne, S. B. (2015) · IEEE International Pulsed Power Conference (PPC) · doi:10.1109/ppc.2015.7296946 · Cited by 3
Performance evaluation of single ended primary inductance converter for photo voltaic applications
Hemalatha, J. N., Hariprasad, S. A., & Anitha, G. (2014) · Annual International Conference on Emerging Research Areas and International Conference on Microelectronics, Communications and Renewable Energy · doi:10.1109/aicera.2014.6908235 · Cited by 3
Almasoudi, F. M., Alatawi, K. S., & Matin, M. A. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2238195 · Cited by 3
“INTRODUCTION Semiconductor power devices constructed from wide bandgap materials such as Silicon Carbide (SiC) and Gallium Nitride (GaN) show superior theoretical features that make them recently attracted in the field of power converter where power devices based on silicon material used [1-4].”
BackgroundChen, Q., Pei, X., Zhou, P., & Yu, Y. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362908 · Cited by 3
“3) The resistance and inductance of PCB traces are According to [2][10], the impedance of capacitance dominates the overall impedance characteristics of the control circuit as shown in (2), where means the impedance of resistance and inductance combined means the impedance of capacitance, and…”
BackgroundGiannoutsos, S. V., Pachos, P., & Manias, S. N. (2012) · IEEE International Energy Conference (ENERGYCON) · doi:10.1109/energycon.2012.6347765 · Cited by 3
“The normally-ON SiC JFET power semiconductors exhibit significant features such as high voltage blocking capability, switching speed, low on-state resistance and low voltage drop [1]-[3].”
BackgroundA 1MHz Gate Driver for Parallel Connected SiC MOSFETs with Protection Circuit
Jiang, X., Zhang, Y., Zhang, Y., Song, Q., & Tang, X.-Y. (2018) · 2018 1st Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia.2018.8734581 · Cited by 3
Arvanitopoulos, A. E., Li, F., Jennings, M. R., Perkins, S., Gyftakis, K. N., Antoniou, M., Mawby, P., & Lophitis, N. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912232 · Cited by 3
Wide Bandgap Semiconductor Based Micro/Nano Devices
Seo, J. (2019) · MDPI eBooks · doi:10.3390/books978-3-03897-843-5 · Cited by 3
Bolgova, V., Kolesnikov, S., Леонов, А. А., Lefebvre, S., & Hlioui, S. (2020) · IEEE International Conference on Dielectrics (ICD) · doi:10.1109/icd46958.2020.9341983 · Cited by 3
“SiC-based power converters show high power density, fast switching and high frequency [5], [6].”
BackgroundAn Application of Variable Switching Frequency PWM on SiC-Based Paralleled Inverters for Motor Drive
Zhao, X., Jiang, D., Li, Q., Ma, Y., & Liu, Y. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9368186 · Cited by 3
“These advantages enable equipment using SiC devices to operate at high temperature, high voltage and high frequency conditions and handle enormous amounts of power [1-2].”
BackgroundZhu, Z. X., Renganathan, V., & Kao, C. R. (2021) · Journal of Electronic Materials · doi:10.1007/s11664-021-09282-z · Cited by 3
Isukapati, S. B., Jang, S. Y., & Sung, W. (2022) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda56483.2022.9955284 · Cited by 3
“Due to its inherent material properties, Silicon has been limited in its power processing and high-temperature operational capabilities [1].”
BackgroundParadigm Changes in Power Electronics Caused by Emerging Materials
Sladić, S., Santis, M. D., Zivic, E., & Giemacki, W. (2022) · doi:10.1109/amse51862.2022.10036673 · Cited by 3
“SiC technology has been developed for decades, also [1].”
BackgroundSiC MOSFETs performance modeling in Simulink Simscape environment
Ferretti, J., Schiapparelli, G.-P., SANGIORGI, E., & Tallarico, A. N. (2023) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda58524.2023.10382195 · Cited by 3
“To date, the most adopted WBG technology for the high power demand of the automotive industry is the SiC [4], widely appreciated for the traction inverter.”
BackgroundOptimisation of Epitaxial Layer Growth with HCl Addition by Optical and Electrical Characterization
Calcagno, L., Izzo, G., Litrico, G., Galvagno, G., Firrincieli, A., Franco, S. D., Mauceri, M., Leone, S., Pistone, G., Condorelli, G., et al. (2007) · Materials science forum · doi:10.4028/www.scientific.net/msf.556-557.137 · Cited by 3
Assessing the Impact of SiC MOSFETs on Converter Interfaces for Distributed Energy Resources
Carr, J., Hotz, D., Balda, J. C., Mantooth, H. A., & Ong, A. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.58 · Cited by 3
“The emerging technology of silicon carbide (SiC) devices shows a great deal of promise in all these areas, having significant improvements over Si in the areas of voltage blocking, switching frequency, losses, and thermal characteristics [ 2-4 ].”
A Comparative Study of Power Semiconductor Devices for Industrial PWM Inverters
Sena, G., Marani, R., Gelao, G., & Perri, A. G. (2016) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v7.i4.pp1420-1428 · Cited by 3
“Only the 6H– and 4H–SiC poly-types are available commercially but 4H–SiC is preferred in power devices fabrication because of its high carrier mobility and its low dopant ionization energy [12].”
BackgroundMiyake, M., Ueno, F., Navarro, D., & Miura-Mattausch, M. (2013) · Materials science forum · doi:10.4028/www.scientific.net/msf.740-742.1103 · Cited by 3
“These differences from silicon IGBTs originate from material parameters shown in Table 1 [6].”
BackgroundSuvanam, S. S., Usman, M., Gulbinas, K., Grivickas, V., & Hallén, A. (2013) · Materials science forum · doi:10.4028/www.scientific.net/msf.740-742.465 · Cited by 3
Seal, S., Glover, M. D., & Mantooth, H. A. (2016) · Additional Conferences (Device Packaging HiTEC HiTEN & CICMT) · doi:10.4071/2016-hitec-159 · Cited by 3
Study of switching method for MATRIX motor realizing variable characteristic
Sakai, Y., Hijikata, H., Akatsu, K., Miyama, Y., & Arita, H. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc.2016.7512776 · Cited by 3
“In particular, wide-band gap semiconductor devices such as SiC MOS-FET have characteristics of low onresistance, fast turn-on/off time and high thermal capability in comparison to the conventional Si devices [1].”
BackgroundTang, G., Bum, L. J., & Chong, C. T. (2016) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc.2016.7861595 · Cited by 3
“In recent years, wide band gap (WBG) devices based power modules, such as silicon carbide (SiC) based power modules, have attracted increased attention due to their superior properties over conventional silicon based power modules, such as insulated gate bipolar transistors (IGBTs) [5, 6].”
BackgroundO'Donnell, S., Chan, A. M. M., Wheeler, P. W., & Castellazzi, A. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8914898 · Cited by 3
Murphree, R. C., Roy, S., Abbasi, A., Assem, P., Pilawa-Podgurski, R. C. N., & Mantooth, A. (2019) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda46397.2019.8998884 · Cited by 3
“This market shift is largely the result of wide bandgap materials, particularly silicon carbide (SiC) and GaN, having a higher critical electric field compared to silicon [1], [2].”
BackgroundGeramirad, H., Morel, F., Lefebvre, B., Vollaire, C., & Bréard, A. (2020) · International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe) · doi:10.1109/emceurope48519.2020.9245720 · Cited by 3
“Moreover, SiC semiconductors are shown with lower on-resistance in conduction mode which allows faster switching [5], [6].”
BackgrounddV/dt effect in high-voltage (1.5kV) 4H–SiC thyristors
Yurkov, S. N., Mnatsakanov, T. T., Levinshteĭn, M. E., Ivanov, P. A., Agarwal, A. K., & Palmour, J. W. (2005) · Solid-State Electronics · doi:10.1016/j.sse.2005.09.011 · Cited by 2
Liu, X., Liu, Y., Liu, Y., Tian, Y., Li, Q., & Zhao, X. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc03000a · Cited by 2
Investigation of heavy-ion induced degradation and catastrophic burnout mechanism in SiC diode
Zhang, H., Peng, C., Ma, T., Zhang, Z., He, Y., Li, B., & Lei, Z.-F. (2025) · Solid-State Electronics · doi:10.1016/j.sse.2025.109184 · Cited by 2
Recent Advances in Unidirectional and Bidirectional GaN Transistors and Gate Driving Techniques
Silviu-Alexandru, V., Rosu, S. G., & Florescu, A. (2025) · IEEE Access · doi:10.1109/access.2025.3636069 · Cited by 2
“Since the early 1990s [7], [8], [9] and throughout the 2000s [10], [11], interest in WBG semiconductor devices has progressively increased.”
Wang, W., Peng, X., Ye, Z., Zhang, Z., & huang, J. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.186873 · Cited by 2
High power GaN HEMTs unleashed: Epitaxial design and strategies
Farizuan, M., Weng-Hooi, T., Haocheng, Z., Firdaus, A., Kawarada, H., Falina, S., & Syamsul, M. (2026) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2026.110543 · Cited by 2
MOSFET Modeling, Simulation and Parameter Extraction in 4H- and 6H- Silicon Carbide
Hasanuzzaman (2005) · Cited by 2
dV/dteffect in high-voltage 4H-SiC thyristors
Levinshteĭn, M. E., Ivanov, P. A., Mnatsakanov, T. T., Yurkov, S. N., Agarwal, A. K., & Palmour, J. W. (2005) · Semiconductor Science and Technology · doi:10.1088/0268-1242/20/8/026 · Cited by 2
Tang, G., Chai, T. C., & Zhang, X. (2018) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2018.00293 · Cited by 2
“Owning to its superior properties over the conventional silicon based power package, the SiC chip based power package has attracted extended interests [4-6].”
BackgroundFive-Level Single-Phase Converter Using SiC with Reduced Switched Voltage Stress
Jain, V. K., Keshri, J. P., Tiwari, H., & Pankaj (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-1476-7_31 · Cited by 2
Jiang, C., Xu, H., Gao, Z., Ren, N., Guo, Q. W., & Sheng, K. (2021) · China International Forum on Solid State Lighting & International Forum on Wide Bandgap Semiconductors China (SSLChina: IFWS) · doi:10.1109/sslchinaifws54608.2021.9675259 · Cited by 2
Low-Frequency Noise Modeling of 4H-SiC Metal-Oxide-Semiconductor Field-Effect Transistors
Liu, Y., Ye, W., Xiong, X.-M., & Deng, W. (2022) · Electronics · doi:10.3390/electronics11193050 · Cited by 2
Yoon, H., Kim, J.-H., Kim, S., Kim, C., Park, Y., Kwon, S., Song, J., Lee, J., Ha, M.-W., & Seok, O. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acff2f · Cited by 2
Comparison of Bi-Directional DC/DC Converter using Si and WBG Devices
Krovi, K. P., Skarolek, P., & Bauer, J. (2023) · International Conference on Electrical Drives and Power Electronics (EDPE) · doi:10.1109/edpe58625.2023.10274025 · Cited by 2
“IGBTs are frequently employed in power supply, resonant converters, and motor drives [2].”
BackgroundQuantum Computational Chemistry and Optoelectronic Properties of a New Synthesis Organic Compound
Qadr, H. M., Mamand, D. M., Aziz, D. M., & Awla, A. H. (2024) · Journal of the Mexican Chemical Society · doi:10.29356/jmcs.v68i3.1946 · Cited by 2
Modeling of Temperature Effects on the Formation of Tracks of Swift Heavy Ions in Silicon Carbide
Zainutdinov, D. I., Voronkov, R. A., Горбунов, С., Medvedev, N. A., Rymzhanov, R. A., Sorokin, M. V., & Volkov, A. E. (2024) · Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques · doi:10.1134/s1027451024700319 · Cited by 2
A High-Density 4H-SiC MOSFET Based on a Buried Field Limiting Ring with Low Qgd and Ron
Cui, W., Guo, J., Xu, H., & Zhang, D. W. (2025) · Micromachines · doi:10.3390/mi16040447 · Cited by 2
“…critical breakdown field strength (2.8 MV/cm for SiC versus 0.3 MV/cm for Si), allowing thinner drift layers and higher voltage blocking capability; and (3) superior thermal conductivity (4.9 W/cm · K for SiC compared to 1.5 W/cm · K for Si), which significantly improves heat dissipation [1,2].”
InfluentialChen, W., Li, A.-C., Hung, C.-L., Hsiao, Y., & Tsui, B. (2025) · IEEE International Conference on Microelectronic Test Structures (ICMTS) · doi:10.1109/icmts63811.2025.11068902 · Cited by 2
“Compared to Si, 4H-SiC has superior physical properties, such as higher thermal conductivity, higher critical electric field and lower intrinsic carrier concentration, making it more suitable for power devices [1, 2].”
Design and fabrication of 4H silicon carbide MOSFETS
Wu, J. (2009) · doi:10.7282/t3154h8f · Cited by 2
Silicon Carbide Power Devices and Processing
Casady, J. B., Bonds, J. R., Draper, W. A., Merrett, J. N., Sankin, I., Seale, D., & Mazzola, M. S. (2003) · MRS Proceedings · doi:10.1557/proc-764-c1.3 · Cited by 2
Metadata
- Authors
- Elasser, A., & Chow, T. P.
- Affiliations
- General Electric (United States) (US)
- Rensselaer Polytechnic Institute (US)
- ORCID
- Chow, T.P.
- Venue
- Proceedings of the IEEE
- Published
- 2002-06
- Volume
- 90
- Issue
- 6
- Pages
- 969-986
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2141390704
- Cited by
- 537
- References
- 78
- Citations by year
- 2026: 23 · 2025: 35 · 2024: 34 · 2023: 40 · 2022: 39 · 2021: 34 · 2020: 24 · 2019: 33 · 2018: 34 · 2017: 36 · 2016: 36 · 2015: 26 · 2014: 18 · 2013: 31 · 2012: 14
- FWCI
- 7.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Proceedings of the IEEE (publishedVersion)
- Funders
- Defense Advanced Research Projects Agency
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Ga2O3 and related materials
- Keywords
- silicon carbide, wide bandgap semiconductors, gallium nitride, power semiconductor devices, power electronics, switching frequency, thermal conductivity, breakdown field, blocking voltage, junction temperature, silicon limitation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.