Silicon carbide benefits and advantages for power electronics circuits and systems
The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Abstract
Silicon offers multiple advantages to power circuit designers, but at the same time suffers from limitations that are inherent to silicon material properties, such as low bandgap energy, low thermal conductivity, and switching frequency limitations. Wide bandgap semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN), provide larger bandgaps, higher breakdown electric field, and higher thermal conductivity. Power semiconductor devices made with SiC and GaN are capable of higher blocking voltages, higher switching frequencies, and higher junction temperatures than silicon devices. SiC is by far the most advanced material and, hence, is the subject of attention from power electronics and systems designers. This paper looks at the benefits of using SiC in power electronics applications, reviews the current state of the art, and shows how SiC can be a strong and viable candidate for future power electronics and systems applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Power semiconductor device figure of merit for high-frequency applications
Baliga, B. J. (1989) · IEEE Electron Device Letters · doi:10.1109/55.43098 · Cited by 1,070 · cited 2×
“SiC, several unipolar and bipolar figures of merit have been proposed [ 17 ], [25]‐[28].”
Background(2007) · Power Systems · doi:10.1201/9781420009231-29 · Cited by 767
Hingorani, N. G. (1995) · IEEE Spectrum · doi:10.1109/6.387140 · Cited by 690 · cited 2×
“transmission lines [5]–[8] all use power devices such as thyristors, GTOs, and diodes.”
BackgroundHingorani, N. G. (1993) · IEEE Spectrum · doi:10.1109/6.206621 · Cited by 646
Optimum semiconductors for high-power electronics
Shenai, K., Scott, R. S., & Baliga, B. J. (1989) · IEEE Transactions on Electron Devices · doi:10.1109/16.34247 · Cited by 617 · cited 1×
“To quantify the performance enhancement possible with SiC, several unipolar and bipolar figures of merit have been proposed [17], [25]–[28].”
BackgroundWide bandgap compound semiconductors for superior high-voltage unipolar power devices
Chow, T. P., & Tyagi, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.297751 · Cited by 487
Self-citationRecent developments of high power converters for industry and traction applications
Bernet, S. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.892825 · Cited by 458 · cited 1×
“voltages up to 6 kV and currents up to 1200 A [1].”
BackgroundSilicon carbide high-power devices
Weitzel, C. E., Palmour, J. W., Carter, C. H., Moore, K., Nordquist, K. K., Allen, S., Thero, C., & Bhatnagar, M. (1996) · IEEE Transactions on Electron Devices · doi:10.1109/16.536819 · Cited by 443
Chung, G. Y., Tin, C. C., Williams, J. R., McDonald, K., Di Ventra, M., Pantelides, S. T., Feldman, L. C., & Weller, R. A. (2000) · Applied Physics Letters · doi:10.1063/1.126167 · Cited by 438
GHANDHI, S. K. (1977) · CERN Document Server (European Organization for Nuclear Research) · Cited by 364
Research works printed but not linked: 6
- Bhalla, 1994, Examination of semiconductors for bipolar power devices, Proc. Inst. Phys. Conf., 621
- Lipkin, N2O processing improves the 4H–SiC : SiO2 interface
- Rupp, 2001, SiC Schottky diodes reach the market, Compound Semiconductor Mag., 7
- High Voltage Diode Data Sheet
- Neudeck, Progress toward high temperature, high power SiC devices, 141, 1
- Benefits of silicon carbide electronics to aircraft
Cited by
Items 401–500 of 558
Zhou, R., Jiao, Q., & Mao, Y. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912300 · Cited by 2
“Compared with Silicon devices, SiC devices are capable of higher blocking voltages, higher switching frequencies, higher junction temperature, lower conduction loss and switching loss [1], [7]-[10].”
BackgroundMukherjee, M. (2010) · InTech eBooks · doi:10.5772/8751 · Cited by 2
Kim, K.-S., & Chung, G. (2013) · Journal of Sensor Science and Technology · doi:10.5369/jsst.2013.22.3.175 · Cited by 2
“Silicon-carbide (SiC), a wide band gap semiconductor, is suitable for these applications because of its merits including high thermal conductivity and high saturation velocity properties [1, 2].”
Background6.6 kW On-Vehicle Charger with a Hybrid Si IGBTs and SiC SBDs Based Booster Power Module
Han, T. J., Preston, J., & Ouwerkerk, D. (2013) · Journal of Power Electronics · doi:10.6113/jpe.2013.13.4.584 · Cited by 2
“Silicon Carbide (SiC) is a wide band-gap semiconductor technology that offers high temperature capability and fast switching speeds in vehicle charger applications [5].”
BackgroundEvaluation of SiC Stack Cascode for 200°C Operations
Li, X., Alexandrov, P., Hostetler, J. L., & Bhalla, A. (2014) · Materials science forum · doi:10.4028/www.scientific.net/msf.778-780.879 · Cited by 2
Effects of wet-oxidized 4H-SiC annealed in HNO3/H2O vapour
Poobalan, B., Moon, J. H., Kim, S., Joo, S., Bahng, W., Kang, I. H., Kim, N., & Cheong, K. Y. (2013) · Microelectronics International · doi:10.1108/mi-08-2013-0038 · Cited by 2
Fully Controlled Semiconductor Devices
Manias, S. N. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811798-9.00010-x · Cited by 2
Structural analysis of 1.1kV 4H-SiC Power DMOSFETs and it's susceptibility to high temperature
Samal, P., Bhajana, V. V. S. K., & Mohapatra, S. K. (2017) · International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech) · doi:10.1109/iementech.2017.8076953 · Cited by 2
“Many research groups have confirmed that SiC based diodes and power MOSFETs offer significant advantages over currently available silicon based devices[6].”
BackgroundInfluentialStructural and optical modification in 4H-SiC following 30 keV silver ion irradiation
Kaushik, P. D., Aziz, A., Siddiqui, A. M., Lakshmi, G. B. V. S., Syväjärvi, M., Yakimova, R., & Yazdi, G. R. (2018) · AIP conference proceedings · doi:10.1063/1.5038714 · Cited by 2
Bhat, A. K. S., & Bhatt, N. (2019) · IEEE Conference on Energy Conversion · doi:10.1109/cencon47160.2019.8974689 · Cited by 2
“The higher bandgap energy and other properties allow a high-power device to block higher blocking voltage, higher currents with lower on resistance with fast switching [13,14].”
BackgroundOptimization of Weight-Volume in Impedance Network SiC Converter for Electric Motorcycle
Efren Fernandez, P., Coello, M., & Rockwood, R. (2019) · IEEE Ecuador Technical Chapters Meeting (ETCM) · doi:10.1109/etcm48019.2019.9014910 · Cited by 2
“In addition, SiC has a significantly lower intrinsic carrier concentration, resulting in a much higher temperature capability [4], this allows to use cooling systems more compact and smaller.”
BackgroundDesign of a SiC Mosfet 6-Phase Boost Rectifier
Nezio, G. D., Benedetto, M. D., Lidozzi, A., & Solero, L. (2021) · International Symposium on Power Electronics (Ee) · doi:10.1109/ee53374.2021.9628237 · Cited by 2
Experimental Comparison of Half-Bridge DC-DC Converter using Silicon and Silicon Carbide MOSFETs
Yadav, U., Khatwani, H. K., Borage, M., Gandhi, M. L., & Tiwari, S. R. (2021) · National Power Electronics Conference (NPEC) · doi:10.1109/npec52100.2021.9672493 · Cited by 2
Low contact resistance side-interconnects strategy for epi-graphene based electronic integration
Zhang, K., Ji, P., Zhao, J., Yang, D., Zhao, M., Zhang, Z., Liu, G., & Ma, L. (2022) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-08601-2 · Cited by 2
Torsæter, B. N. (2016) · BIBSYS Brage (BIBSYS (Norway)) · Cited by 2
Shin, Y. J. (2016) · theses.fr (ABES) · doi:10.70675/1ea79301z239az4fe4zb8b8z474cbb223f99 · Cited by 2
Performance and robustness characterisation of SiC power MOSFETs
Fayyaz, A. (2018) · Nottingham ePrints (University of Nottingham) · Cited by 2
Modeling Radiation Risk Assessment and Mitigation for Spacecraft Electronics
Austin, R. (2019) · Cited by 2
Thermal oxidation and dopant activation of silicon carbide
Šimonka, V. (2018) · reposiTUm (TU Wien) · doi:10.34726/hss.2018.60302 · Cited by 2
Characterization, modeling and aging behavior of GaN power transistors
Zaki, F. (2018) · theses.fr (ABES) · doi:10.70675/7690c93bz9191z49c1z8e52za64a66bc7edd · Cited by 7
Gao, Z., Guo, Q. W., Ren, N., & Sheng, K. (2020) · China International Forum on Solid State Lighting & International Forum on Wide Bandgap Semiconductors China (SSLChina: IFWS) · doi:10.1109/sslchinaifws51786.2020.9308775 · Cited by 1
“Discussion 1 Introduction Although silicon carbide MOSFETs show great electrical properties due to material advantages [1,2], certain ruggedness issues of SiC MOSFETs remain to be fully understood and quantified to minimize over-design practices.”
BackgroundHybrid Power Drive Solution for Increased Sustainability in Aircraft Actuation Systems
O'Donnell, S., Egan, L., Calmels, A., & Wheeler, P. W. (2022) · IEEE Conference on Technologies for Sustainability · doi:10.1109/sustech53338.2022.9794154 · Cited by 1
On the Switching Loss of the SiC MOSFET Parasitic Capacitors
Ho, T.-H., & Chen, Y.-M. (2023) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia58218.2023.10261918 · Cited by 1
Model-Based Adaptive Dead Time Optimization for Series Resonant DC-DC Converter Using SiC MOSFETs
Komma, S., & Lakshminarasamma, N. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10312538 · Cited by 1
“…preferred for the operation of series resonant converters as SiC MOSFET has a lower on-state resistance than Si MOSFET and much higher switching speed than Si IGBT, promising to resolve the trade-off between high frequency and high efficiency for (600-800)V energy conversion systems [4] [5] [6].”
BackgroundThe Effects of a Gate Bias Condition on 1.2 kV SiC MOSFETs during Irradiating Gamma-Radiation
Kim, C., Yoon, H., Park, Y., Kim, S., Kang, G., Kim, D., & Seok, O. (2024) · Micromachines · doi:10.3390/mi15040496 · Cited by 2
“Several studies have analyzed changes in the electrical characteristics of commercially available silicon and SiC power MOSFETs due to radiation exposure [11–13].”
BackgroundFazio, T., Napoli, A., & Militello, B. (2024) · Physical review. B./Physical review. B · doi:10.1103/physrevb.109.224305 · Cited by 2
Dartora, G. H. S., Radtke, C., & Stedile, F. C. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad9a16 · Cited by 1
Wijaya, M. A. P., Irianto, C. G., & Arifianto, T. (2025) · Journal of Railway Transportation and Technology · doi:10.37367/jrtt.v4i1.59 · Cited by 1
Kim, J. H., Park, B., Park, J., Kang, G.-D., Sun, G., & Kim, M.-S. (2025) · Nuclear Engineering and Technology · doi:10.1016/j.net.2025.103798 · Cited by 1
Couillaud, H., Fourmont, N., Delbos, C., Assaillit, G., Poujols, D., Hubert, G., Artola, L., & Gaillardin, M. (2026) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2026.3660211 · Cited by 1
Islam, S., Sengupta, A., Ball, D. R., Osheroff, J. M., Sternberg, A. L., Galloway, K. F., Witulski, A. F., Kosier, S. L., & Schrimpf, R. D. (2026) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2026.3714726 · Cited by 1
Optimisation of Epitaxial Layer Growth by Schottky Diodes Electrical Characterization
Via, F. L., Galvagno, G., Firrincieli, A., Roccaforte, F., Franco, S. D., Ruggiero, A., Calcagno, L., Foti, G., Mauceri, M., Leone, S., et al. (2006) · Materials science forum · doi:10.4028/www.scientific.net/msf.527-529.199 · Cited by 1
Calibration of 4H-SiC TCAD Models and Material Parameters
Philip, M., & O'Neill, A. G. (2006) · Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD) · doi:10.1109/commad.2006.4429899 · Cited by 1
“TABLE 1 provides a list of material parameters that are relevant to highpower, high-voltage and high-temperature applications for silicon, 3C-SiC, 4H-SiC and 6H-SiC [2].”
BackgroundInfluentialTransport Properties of Wide Band Gap Semiconductors
Brennan, K. F., Callen, W. R., Gaylord, T. K., & Citrin, D. S. (2004) · Cited by 1
Physical simulation, fabrication and characterization of Wide bandgap semiconductor devices
Faraz, S. M. (2011) · Cited by 1
Low Pressure Homoepitaxial Growth of 4H-SiC on 4°off-Axis Substrates
Ji, H., Zhang, Y. M., Jia, R. X., Wang, Y. H., & Xin, B. (2015) · Materials science forum · doi:10.4028/www.scientific.net/msf.821-823.181 · Cited by 1
Si-SiC based switching power amplifiers for MHD modes control in fusion experiments
Gaio, E., Ferro, A., Novello, L., & Matsukawa, M. (2015) · IEEE/NPSS Symposium on Fusion Engineering · doi:10.1109/sofe.2015.7482346 · Cited by 1
“The critical electric field and the electron drift velocity at high electric fields (saturated velocity) are higher than those of Si and this allows for higher frequency of operation [28][29].”
BackgroundShimin, V. V., Shah, V. A., & Lokhande, M. M. (2016) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2016.7791607 · Cited by 1
“The efficiency and power density of switch mode power supplies (SMPS) has been greatly improved with the introduction of wide bandgap (WBG) semiconductors [2].”
BackgroundDesign And Characterization Of High Temperature Packaging For Wide-bandgap Semiconductor Devices
Grummel, B. J. (2012) · Journal of International Crisis and Risk Communication Research · Cited by 2
Silvaco-Based Electrothermal Simulation of 10 kV 4H-SiC P-I-N Diode Under Pulsed Condition
Pushpakaran, B. N., Bayne, S. B., & Ogunniyi, A. A. (2017) · IEEE International Pulsed Power Conference (PPC) · doi:10.1109/ppc.2017.8291214 · Cited by 1
O'Donnell, S., Egan, L., Walsh, V., Wheeler, P. W., & Castellazzi, A. (2018) · Repository@Nottingham (University of Nottingham) · Cited by 1
Analysis of SiC MOSFETs Basic Parameters Aiming Application in Power Drivers for Electric Vehicles
Feitosa, F. C., Pereira, W. H., Buhler, R. T., & Giacomini, R. C. (2019) · Symposium on Microelectronics Technology and Devices · doi:10.1109/sbmicro.2019.8919374 · Cited by 1
Molybdenum Disulphide Nanosheet: Hydrothermal Synthesis and Characterization
Deb, S., & Sarkar, J. (2021) · Springer proceedings in physics · doi:10.1007/978-981-16-5407-7_1 · Cited by 1
Simulation Study of Single-Event Burnout for the 4H-SiC VDMOSFET with N+ Split Source
Zhou, J.-C., Yu, C., & Wang, Y. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2148/1/012011 · Cited by 1
Seal, S., Glover, M. D., & Mantooth, H. A. (2016) · Journal of Microelectronics and Electronic Packaging · doi:10.4071/imaps.514 · Cited by 2
Huang, C., & Wang, Y. (2022) · Emergent Materials · doi:10.1007/s42247-022-00385-9 · Cited by 1
A compact circuit-level model for single-event burnout in SiC power MOSFET devices
Shen, P., Wang, Y., Li, X.-J., Yang, J., & Cao, F. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac9ef4 · Cited by 1
Analysis, Design & PCB Optimization of a DC Bus Planar CM Inductor to Reduce EMI in SiC Converters
Vrankovic, Z., Sizov, G. Y., Skibinski, G. L., Suryadevara, R., & Da, Y. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947673 · Cited by 1
“INTRODUCTION Wide Band Gap (WBG) technology provides enormous opportunities to increase converter switching speed, power density, and efficiency [1-2], while simultaneously on the down side increasing conducted and radiated emissions.”
BackgroundPu, X., Wei, Y., Li, X., Feng, H., Liang, X., Feng, J., Sun, J., Yu, X., & Guo, Q. (2022) · Journal of Nanoelectronics and Optoelectronics · doi:10.1166/jno.2022.3254 · Cited by 1
Jiang, C. Y., Xu, H. Y., Yang, S. L., Wang, H., Ren, N., & Sheng, K. (2023) · Key engineering materials · doi:10.4028/p-f1aq7k · Cited by 1
“The SiC MOSFET, operating at high-temperature and high-speed condition, has been proved to enhance power density significantly [1].”
BackgroundPerformance enhancement of 1.7 kV MOSFET using PIN-junction gate and integrated heterojunction
Wang, Q., Wang, Y., Fei, X.-X., Li, X., Yang, J., & Yu, C. (2023) · Microelectronics Reliability · doi:10.1016/j.microrel.2023.115305 · Cited by 1
Utsumi, K., Tanaka, H., & Mori, N. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ad189c · Cited by 1
Zhang, Q., Liu, H., & Zhou, Y. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3370712 · Cited by 1
Preliminary experiments quantifying the arcing process in a DC circuit breaker development project
Dassanayake, C., Kularatna, N., Steyn‐Ross, D. A., Gurusinghe, N., & Gunawardane, K. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509082 · Cited by 1
A comprehensive evaluation of 650V SiC JFET and Cascode JFET
Guo, Q., Liu, H., Zhou, Y., Wang, Q., Hu, A., Jin, D., & Yang, H. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567918 · Cited by 1
Design and Evaluation of High Efficiency Power Converters Using Wide-Bandgap Devices for PV Systems
Almasoudi, F. M. (2018) · Digital Commons - DU (University of Denver) · Cited by 1
Structural and Morphological Investigation of Pendeo-Epitaxy 3C-SiC on Si Substrates
Kim, B. C., & Capano, M. A. (2007) · Journal of Electronic Materials · doi:10.1007/s11664-007-0294-2 · Cited by 1
Via, F. L., Roccaforte, F., Franco, S. D., Ruggiero, A., Neri, L., Reitano, R., Calcagno, L., Foti, G., Mauceri, M., Leone, S., et al. (2005) · Materials science forum · doi:10.4028/www.scientific.net/msf.483-485.429 · Cited by 1
Silicon Carbide GTO Thyristor Loss Model for HVDC Application
Chinthavali, M. (2003) · Cited by 1
Driver Based Soft Switch for Pulse-Width-Modulated Power Converters
Yu, H. (2005) · VTechWorks (Virginia Tech) · Cited by 1
Copper and Silver Metallization for High Temperature Applications
Mardani, S. (2016) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 1
Reliability and irradiation effects of 4H-SiC MOS devices
Zhang, X. (2013) · Cited by 1
Olimmah, M. (2020) · Cited by 1
Análise das propriedades básicas do sic VDMOSFET (WBG) para aplicações de tração automotiva
Feitosa, F. C. (2019) · doi:10.31414/ee.2019.d.130986 · Cited by 1
Boutry, A. (2021) · theses.fr (ABES) · doi:10.70675/65c1ece5z9ba7z4796za025z84b26d979fc5 · Cited by 1
Fonteneau, X. (2014) · theses.fr (ABES) · doi:10.70675/d9088776z95c9z4433z8aecz9b864d58df16 · Cited by 1
Innovative materials for packaging
Halawani, N. (2017) · theses.fr (ABES) · doi:10.70675/9ba92b0az0c24z4571za75az18aa22d0aa8a · Cited by 1
Characterization of winding insulation of electrical machines fed by voltage waves with high dV/dt
Gavrilenko, V. (2020) · theses.fr (ABES) · doi:10.70675/f6211303z46cfz41c1za411z5c7a2b8817ca · Cited by 1
Residual stress analysis in 3C-SiC thin films by substrate curvature method
Carballo, J. M. (2010) · Digital Commons - University of South Florida (University of South Florida)
Power devices and integrated circuits based on 4H-SiC lateral JFETs
Su, M. (2010) · Rutgers University Community Repository (Rutgers University) · doi:10.7282/t37944sv
DiSanto, D. W. (2005) · Summit (Simon Fraser University)
Sic MOSFET Modeling and Simulation for Pspice
Zhu, X., Xu, G., Jiao, S., & Zhao, Z. (2015) · International Conference on Advances in Mechanical Engineering and Industrial Informatics (AMEII) · doi:10.2991/ameii-15.2015.315
“Introduction With the continuous development of material science and technology, silicon carbide as a new wide band gap semiconductor materials [1] has high breakdown field, high saturated electron drift velocity, high thermal conductivity, high melting point, low on-state resistance and other excellent physical and e…”
BackgroundSimulation Study of High-k Materials for SiC Trench MOSFETs
Tappin, P., Mahapatra, R., Wright, N. G., Bhatnagar, P., & Horsfall, A. B. (2007) · Materials science forum · doi:10.4028/www.scientific.net/msf.556-557.839
Properties of Single Crystalline 3C-SIC Thin Films Grown with Several Carbonization Conditions
Shim, J.-C., & Chung, G. (2010) · Journal of the Korean Institute of Electrical and Electronic Material Engineers · doi:10.4313/jkem.2010.23.11.837
Alkhem, A., Šašić, R., Lukić, P. M., & Ostojić, S. (2013) · Physica Scripta · doi:10.1088/0031-8949/89/01/015803
“One such structure is a vertical double implanted metal–oxide–semiconductor (VDIMOS) transistor in 4H-SiC (this material has been chosen because its low field mobility is almost two times larger in comparison to 6H-SiC) [8, 9].”
BackgroundElectrical Characterisation of Epitaxially Grown 3C-SiC Films
Jiang, L. D., Zhong, L., Reed, F., Taysir, S., Bosi, M., & Attolini, G. (2013) · Materials science forum · doi:10.4028/www.scientific.net/msf.740-742.617
Impact Ionization in Ion Implanted 4H-SiC Photodiodes
Loh, W. S., Goh, E. Z. J., Vassilevski, K. V., Nikitina, I. P., David, J. P. R., Wright, N. G., & Johnson, C. M. (2008) · MRS Proceedings · doi:10.1557/proc-1069-d07-12
“SiC = 3.23 eV at 300K), high thermal conductivity, large breakdown electric field strength, high saturated drift velocity, outstanding physical toughness and chemical inertness [ 1 , 2]. All these desirable characteristics make SiC a promising candidate to overcome the performance limitations of much more readily avai…”
BackgroundInfluentialOn the subthreshold measurements of SIC MOSFETs
Al-Kofahi, I. S. (2008) · IEEE International Conference on Semiconductor Electronics · doi:10.1109/smelec.2008.4770363
“9 W cm K) that give it a great potential for hightemperature and high-power device applications [1-5].”
BackgroundControlled Parallel DC-DC Converter Unit
Mazumder, S. K., Acharya, K., & Tan, C. M. (2007)
Analysis & Design of Active Inductor
Rana, D. (2014)
Venkatachalam, A. (2009) · SMARTech Repository (Georgia Institute of Technology)
Heinemann, L., & Jamil, S. (2016) · Record of conference papers/Record of conference papers - Petroleum and Chemical Industry Conference · doi:10.1109/pcicon.2016.7589232
Performance evaluations of capacitor-switched PSFB converter with SiC MOSFETs
Altintaş, N., Han, D., Li, Y., & Sarlioglu, B. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793933
“The wide bandgap, particularly SiC devices, are capable of operating with increased voltage rating, switching frequencies, and ambient temperature than Si devices, thus enabling power converters with increased efficiency, power density, and reduced cost [10-16].”
BackgroundSYNTHESIZING DIVERSE WAVEFORMS THROUGH A HIGH POWER WIDE BANDWIDTH SIC-BASED INVERTER
Chowdhury, A. M. (2016) · OhioLink ETD Center (Ohio Library and Information Network)
Simulation of conducted EMI in SiC MOSFET buck converters before and after aging
Douzi, S., Tlig, M., Slama, J. B. H., & Kadi, M. (2017) · International Conference on Information and Digital Technologies (IDT) · doi:10.1109/dt.2017.8012095
“Thus, silicon carbide power semiconductor switches are the ideal choice for future power static converters [5,6].”
BackgroundPerformance improvement in 4H-SiC UMOSFET with HfO2/Al2O3 gate dielectric stack
Bharti, D., & Islam, A. (2017) · Devices for Integrated Circuit (DevIC) · doi:10.1109/devic.2017.8074064
“INTRODUCTION Excellent properties of silicon carbide (SiC) and its ability to grow native oxide makes it an outstanding candidate for high power MOS devices [1], [2].”
BackgroundSharma, I. M., & Chatterjee, A. (2011)
The New Active Output Filter for Variable Speed Constant Frequency Aerospace Applications
Alhuwaishel, F. M. (2015) · OakTrust (Texas A&M University Libraries)
An Active Inductor and Tunable Bandpass Filter in GaN
Herbert, T. B. (2018) · Carleton University's Institutional Repository (MacOdrum Library, Carleton University) · doi:10.22215/etd/2018-13272
“1 lists material properties of typical semiconductor materials used in high power RF applications [1].”
BackgroundInvestigation of silicon carbide based high voltage and high power electronics components
Abood, I. (2015) · National Repository of Dissertations in Serbia
Advanced DC/DC Full SiC Converter for On Board Heavy Traction Applications
Fasce, F., Rossi, F., & Fasce, G. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915422
Johnson, R. A. (2020) · Discover Archive (Vanderbilt University)
Operating analysis of SiC DC/DC power converter for synchronous and asynchronous modulation
Niewiara, L. J., & Tarczewski, T. (2021) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc48073.2021.9432543
Riley, D. B. (2021) · DalSpace (Dalhousie University)
Design and Modelling of 1 kW, 200–400 V, Multiphase Boost Converter
Soubhagya, A., Ravikiran Rao, M., & Suryanarayana, K. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-1642-6_10
4H-SiC Integrated circuits for high temperature and harsh environment applications
Alexandru, M. (2013) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-95117
Optical studies of surface recombination velocity in 4H-SiC epitaxial layer
Mahabadi, H. P. (2011)
Lagudu, U. R. K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821791-7.00003-4
Metadata
- Authors
- Elasser, A., & Chow, T. P.
- Affiliations
- General Electric (United States) (US)
- Rensselaer Polytechnic Institute (US)
- ORCID
- Chow, T.P.
- Venue
- Proceedings of the IEEE
- Published
- 2002-06
- Volume
- 90
- Issue
- 6
- Pages
- 969-986
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2141390704
- Cited by
- 537
- References
- 78
- Citations by year
- 2026: 23 · 2025: 35 · 2024: 34 · 2023: 40 · 2022: 39 · 2021: 34 · 2020: 24 · 2019: 33 · 2018: 34 · 2017: 36 · 2016: 36 · 2015: 26 · 2014: 18 · 2013: 31 · 2012: 14
- FWCI
- 7.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Proceedings of the IEEE (publishedVersion)
- Funders
- Defense Advanced Research Projects Agency
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Ga2O3 and related materials
- Keywords
- silicon carbide, wide bandgap semiconductors, gallium nitride, power semiconductor devices, power electronics, switching frequency, thermal conductivity, breakdown field, blocking voltage, junction temperature, silicon limitation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.