The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Lithography and Other Patterning Techniques for Future Electronics
Abstract
For all technologies, from flint arrowheads to DNA microarrays, patterning the functional material is crucial. For semiconductor integrated circuits (ICs), it is even more critical than for most technologies because enormous benefits accrue to going smaller, notably higher speed and much less energy consumed per computing function. The consensus is that ICs will continue to be manufactured until at least the ldquo22 nm noderdquo (the linewidth of an equal line-space pattern). Most patterning of ICs takes place on the wafer in two steps: (a) lithography, the patterning of a resist film on top of the functional material; and (b) transferring the resist pattern into the functional material, usually by etching. Here we concentrate on lithography. Optics has continued to be the chosen lithographic route despite its continually forecast demise. A combination of 193-nm radiation, immersion optics, and computer-intensive resolution enhancement technology will probably be used for the 45- and 32-nm nodes. Optical lithography usually requires that we first make a mask and then project the mask pattern onto a resist-coated wafer. Making a qualified mask, although originally dismissed as a ldquosupport technology,rdquo now represents a significant fraction of the total cost of patterning an IC largely because of the measures needed to push resolution so far beyond the normal limit of optical resolution. Thus, although optics has demonstrated features well below 22 nm, it is not clear that optics will be the most economical in this range; nanometer-scale mechanical printing is a strong contender, extreme ultraviolet is still the official front runner, and electron beam lithography, which has demonstrated minimum features less than 10 nm wide, continues to be developed both for mask making and for directly writing on the wafer (also known as ldquomaskless lithographyrdquo). Going from laboratory demonstration to manufacturing technology is enormously expensive ( $1 billion) and for good reason. Just in terms of data rate (mask pattern to resist pattern), today's exposure tools achieve about 10 Tb/s at an allowable error rate of about 1/h; this data rate will double with each generation. In addition, the edge placement precision required will soon be 30 parts per billion. There are so many opportunities for unacceptable performance that making the right decision goes far beyond understanding the underlying physical principles. But the benefits of continuing to be able to manufacture electronics at the 22-nm node and beyond appear to justify the investment, and there is no shortage of ideas on how to accomplish this.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Molecular Self-Assembly and Nanochemistry: a Chemical Strategy for the Synthesis of Nanostructures
Whitesides, G. M., Mathias, J. P., & Seto, C. T. (1991) · Science · doi:10.1126/science.1962191 · Cited by 3,632
Design of ion-implanted MOSFET's with very small physical dimensions
Dennard, R. H., Gaensslen, F. H., Yu, H.-N., Rideout, V. L., Bassous, E., & LeBlanc, A. R. (1974) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1974.1050511 · Cited by 3,548
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Self-citationImprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
Self-citationNew Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Block Copolymer Lithography: Periodic Arrays of ~10 11 Holes in 1 Square Centimeter
Park, M., Harrison, C., Chaikin, P. M., Register, R. A., & Adamson, D. H. (1997) · Science · doi:10.1126/science.276.5317.1401 · Cited by 1,866
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588605 · Cited by 1,729
Self-citationKumar, A., & Whitesides, G. M. (1993) · Applied Physics Letters · doi:10.1063/1.110628 · Cited by 1,605
Sub-10 nm imprint lithography and applications
Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589752 · Cited by 1,113
Self-citationDirected Assembly of Block Copolymer Blends into Nonregular Device-Oriented Structures
Stoykovich, M. P., Müller, M., Kim, S. O., Solak, H. H., Edwards, E. W., de Pablo, J. J., & Nealey, P. F. (2005) · Science · doi:10.1126/science.1111041 · Cited by 962
Dynamics of Block Copolymers: Theory and Experiment
Fredrickson, G. H., & Bates, F. S. (1996) · Annual Review of Materials Science · doi:10.1146/annurev.ms.26.080196.002441 · Cited by 678
Mold-assisted nanolithography: A process for reliable pattern replication
Haisma, J., Verheijen, M., van den Heuvel, K., & van den Berg, J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588604 · Cited by 659
Introduction to microlithography
Thompson, L. F., Willson, C. G., & Bowden, M. J. (1994) · International Linear Collider · Cited by 516
Step and flash imprint lithography: Template surface treatment and defect analysis
Bailey, T., Choi, B. J., Colburn, M., Meissl, M., Shaya, S., Ekerdt, J. G., Sreenivasan, S. V., & Willson, C. G. (2000) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.1324618 · Cited by 351
Levinson, H. J. (2005) · SPIE eBooks · doi:10.1117/3.601520 · Cited by 348
Roller nanoimprint lithography
Tan, H., Gilbertson, A., & Chou, S. Y. (1998) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.590438 · Cited by 317
Self-citationTemplated Self‐Assembly of Block Copolymers: Effect of Substrate Topography
Cheng, J. Y., Ross, C. A., Thomas, E. L., Smith, H. I., & Vancso, G. J. (2003) · Advanced Materials · doi:10.1002/adma.200305244 · Cited by 230
Introduction to Microlithography: Theory, Materials, and Processing
Thompson, L. F., Willson, C. G., & Bowden, M. J. (1983) · ACS symposium series · doi:10.1021/bk-1983-0219 · Cited by 219
Self-aligned self assembly of multi-nanowire silicon field effect transistors
Black, C. T. (2005) · Applied Physics Letters · doi:10.1063/1.2112191 · Cited by 190
Nanometer-Scale Pattern Registration and Alignment by Directed Diblock Copolymer Self-Assembly
Black, C. T., & Bezencenet, O. (2004) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2004.834160 · Cited by 162
6 nm half-pitch lines and 0.04 µm2static random access memory patterns by nanoimprint lithography
Austin, M. D., Zhang, W., Ge, H., Wasserman, D. M., Lyon, S. A., & Chou, S. Y. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/8/010 · Cited by 144
Self-citationElectron-beam microcolumns for lithography and related applications
Chang, T. H. P., Thomson, M. G. R., Kratschmer, E., Kim, H. S., Yu, M. L., Lee, K. Y., Rishton, S. A., Hussey, B. W., & Zolgharnain, S. (1996) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.588666 · Cited by 123
Hinsberg, W. D., Houle, F. A., Sanchez, M. I., & Wallraff, G. M. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.455.0667 · Cited by 120
Fabrication of 60-nm transistors on 4-in. wafer using nanoimprint at all lithography levels
Zhang, W., & Chou, S. Y. (2003) · Applied Physics Letters · doi:10.1063/1.1600505 · Cited by 118
Self-citationFirst performance results of the ASML alpha demo tool
Meiling, H., Meijer, H., Banine, V., Moors, R., Groeneveld, R., Voorma, H.-J., Mickan, U., Wolschrijn, B., Mertens, B., van Baars, G., et al. (2006) · SPIE Proceedings · doi:10.1117/12.657348 · Cited by 79
Pattern Registration Between Spherical Block‐Copolymer Domains and Topographical Templates
Cheng, J. Y., Zhang, F., Smith, H. I., et al. (2006) · Advanced Materials · doi:10.1002/adma.200501936 · Cited by 66
X-ray lithography: On the path to manufacturing
Warlaumont, J. M. (1989) · Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena · doi:10.1116/1.584505 · Cited by 34
Current status and future prospect of immersion lithography
Owa, S., Nagasaka, H., Nakano, K., & Ohmura, Y. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.656887 · Cited by 17
Cited by
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Jeyaraj, M., Gurunathan, S., Qasim, M., Kang, M.-H., & Kim, J.-H. (2019) · Nanomaterials · doi:10.3390/nano9121719 · Cited by 481
Gnilitskyi, I., Derrien, T. J.-Y., Levy, Y., Bulgakova, N. M., Mocek, T., & Orazi, L. (2017) · Scientific Reports · doi:10.1038/s41598-017-08788-z · Cited by 363
Review on Micro- and Nanolithography Techniques and their Applications
Pimpin, A., & Srituravanich, W. (2012) · Engineering Journal · doi:10.4186/ej.2012.16.1.37 · Cited by 363
Semiconductor Nanowire Fabrication by Bottom-Up and Top-Down Paradigms
Hobbs, R. G., Petkov, N., & Holmes, J. D. (2012) · Chemistry of Materials · doi:10.1021/cm300570n · Cited by 320
Metadata
- Authors
- Pease, R. F., & Chou, S. Y.
- Venue
- Proceedings of the IEEE
- Published
- 2008-02
- Volume
- 96
- Issue
- 2
- Pages
- 248-270
- ISSN
- 0018-9219 (ISSN-L)
- 1558-2256
- OpenAlex
- W1991117616
- Cited by
- 399
- References
- 29
- FWCI
- 15.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.