Reliability of Power Electronic Systems for EV/HEV Applications
Open accessThe DOI matches its Crossref record; 85 of the 88 references it cites were found in a registry or an index; 4 of the 45 sources its claims cite were checked for support.
Abstract
The electrification of the transportation sector is moving on at a fast pace. All car manufacturers have strong programs to electrify their car fleet to fulfill the demands of society and customers by offering carbon-neutral technologies to bring goods and persons from one location to another. Power electronics technology is, in this evolution, essential and also in a rapid development technology-wise. Some of the introduced technologies are quite mature, and the systems designed must have high reliability as they can be quite complicated from an electrical perspective. Therefore, this article focuses on the reliability of the used power electronic systems applied in electric vehicles (EVs) and hybrid EVs (HEVs). It introduces the reliability requirements and challenges given for the power electronics applied in EV/HEV applications. Then, the advances in power electronic components to address the reliability challenges are introduced as they individually contribute to the overall system reliability. The reliability-oriented design methodology is also discussed, including two examples: an EV onboard charger and the drive train inverter. Finally, an outlook in terms of research opportunities in power electronics reliability related to EV/HEVs is provided. It can be concluded that many topics are already well handled in terms of reliability, but issues related to complete new technology introduction are important to keep the focus on.
Overview
CoChat Summary
TL;DR
This article reviews reliability requirements, challenges, component advances, and reliability-oriented design for power electronics in EV/HEV applications. It demonstrates mission-profile-based lifetime assessment for a traction inverter and an onboard charger, finding very low predicted failure probabilities before a 600,000-km service target but noting substantial modeling uncertainties.
Key findings
- Automotive reliability requirements are severe: expected operating life >10 years, ambient temperature range −55 °C to 150 °C, and zero acceptable failure rate; temperature is the major stressor (55% of stress conditions in Table 1), with active thermal cycles ΔTj ≥ 100 °C.
- In the drive-train case, a 75-kW PMSM/330-V battery/400-A, 650-V IGBT module under an EUDC profile gives B0.001 lifetimes of approximately 500,000–1,300,000 km for the transistor and 600,000–1,500,000 km for the diode (90% CI); at the 600,000-km target, failure probability is approximately 0.0004% for the transistor, 0.0002% for the diode, and 0.004% for the entire power module.
- In the OBC case, a 560-µF/400-V dc-link capacitor in a 3.3-kW single-phase OBC has a B1 lifetime of approximately 500,000–2,500,000 km (90% CI), with approximately 0.025% probability of failure before 600,000 km.
- Component advances include reports that SiC MOSFETs with conventional packaging have lower power cycling capability than Si IGBTs, next-generation automotive modules expected to reach 175 °C, and CeraLink capacitors maintaining performance up to 150 °C.
Methods
- The article is a review plus case studies using a six-step mission-profile-based reliability assessment: driving cycle and ambient conditions → mechanical power → electrical loading → electrothermal modeling → empirical lifetime models → reliability block diagram system-level reliability.
- Case studies cover an EV drive train (75-kW PMSM, 330-V battery, 400-A/650-V IGBT module, EUDC mission profile) and a 3.3-kW single-phase OBC (560-µF/400-V dc-link capacitor, standard charging profile), using Rainflow counting, the LESIT lifetime model, Weibull shape parameter β = 3, Monte Carlo simulation with 5% lifetime-coefficient variation, and 90% confidence intervals.
- Thermal modeling uses junction-to-case temperature only; the coolant temperature is assumed to be 75 °C because outer thermal-network information was limited.
Limitations
- Stated: reliability results are subject to uncertainties from environmental mission profiles, electrothermal modeling, and lifetime models, and the error margins can significantly reduce confidence in predicted lifetime; due to high uncertainty, the metrics are used for relative benchmarking rather than as direct lifetime indicators.
- Stated: vibration, dust, and contamination are not considered because of a lack of empirical lifetime models; software failures and battery technology are excluded, and the focus is limited to thermal-related wear-out of power semiconductors and capacitors.
- Stated/evident: the lack of publicly available empirical lifetime models for automotive-qualified IGBT modules led to use of the LESIT model at B10 lifetime with 50% confidence and extrapolation to lower failure probabilities; modeling only junction-to-case temperature with an assumed 75 °C coolant further limits thermal representation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures




![Fig. 5 R&D and lifetime requirements in EV/HEV. (a) Power electronics R&D development roadmap for electric-based vehicles based on the reports in [38] and [39]. (b) Automotive lifetime requirements based on [39], * [40], ** [38], and *** [41].](https://figures.cochat.ai/paper-figures/16b2b895451544858b0fc9e372c6aefa/reliability-of-power-electronic-systems-for-ev-hev-applications-figure-5.png)
![Fig. 6 Advances in packaging elements for power modules [18].](https://figures.cochat.ai/paper-figures/41a8f71cf76147d9b1432b384fc74271/reliability-of-power-electronic-systems-for-ev-hev-applications-figure-6.png)

![Fig. 8 Typical operational mission profiles for the two subassemblies. (a) Electric vehicle driving cycle [80]. (b) Scaled-down power demand for an EV OBC (based on [81]).](https://figures.cochat.ai/paper-figures/68c177e618b44bcb9d952857c7b98b4a/reliability-of-power-electronic-systems-for-ev-hev-applications-figure-8.png)










Verification
Claims the paper makes
1 Valid · 9 Not valid · 32 Not checked · 46 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Besides, the ambient temperature under the hood could be as high as 100 ◦ C with high humidity [77].”
What the sources say
- Could not verifycites [77] sourceExperimental — accuracy not yet measured
The Thermal Model section treats ambient temperature as a constant model input, but does not describe conditions under a vehicle hood. Searches for 100°C ambient temperature, under-hood conditions, and humidity found no passage supporting the claimed temperature or humidity. (LLM, conf=0.74)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Therefore, advanced cooling technologies, such as spray cooling and jet impingement, are developed to meet the demands of the automotive industry [79].”
What the sources say
- Could not verifycites [79] sourceExperimental — accuracy not yet measured
The Introduction discusses temperature-related reliability, and Section II mentions a coolant loop for a telecom backup fuel-cell system; neither addresses automotive cooling technologies. Searches for spray cooling, jet impingement, and automotive thermal management found no passage supporting the claim. Page numbers were unavailable in our copy. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the dc-link capacitor of the OBC has a 1% probability of failure between 500 000 and 2 500 000 km, with a 90% confidence interval.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 2 assumptions not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, as shown in Table 2, there is a lack of qualification standards for power semiconductor modules.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“As can be seen from the table, temperature stress is a major stressor that destroys power electronic components.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
33 more claims
Create a free account to see all 88 claims and to verify the 2 references still open.
- Probably not a substantial claim. 42
- It may state two separate claims as one. 16
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ III. A D V A N C E S I N P O W E R E L E C T R O N I C C O M P O N E N T S T O A D D R E S S R E L I A B I L I T Y C H A L L E N G E S · p. 7
“this article focuses on the advances in power modules and capacitors only in Section III”
§ C. Cooling Assemblies and Concepts · p. 9
“## C. Cooling Assemblies and Concepts”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ B. Reliability Analysis of an Electric Vehicle Case Study · p. 10
“The overall topology configurations of the electrical drive train main inverter and the onboard EV charger for the two selected subassemblies are shown in Figs. 3 and 5, respectively.”
§ A. Power Modules · p. 8
“Fig. 5. R&D and lifetime requirements in EV/HEV.”
Citations
Cites
An Industry-Based Survey of Reliability in Power Electronic Converters
Yang, S., Bryant, A., Mawby, P., Xiang, D., Ran, L., & Tavner, P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124436 · Cited by 2,019
Handbook of software reliability engineering
Lyu, M. R.-T. (1996) · McGraw-Hill, Inc. eBooks · Cited by 1,592
Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles
Zhu, Z. Q., & Howe, D. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.892482 · Cited by 1,547 · cited 1×
“Intensive research and development are currently going on enhancing PM EMs and adopting different types of EMs in order to further improve the performance of future electric-based vehicles [48].”
MethodEmadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“Notably, different possible configurations for the power train in EV/HEV can be found in the automotive market [25]–[28].”
BackgroundReliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview
Wang, H., & Blaabjerg, F. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2308357 · Cited by 1,384 · cited 3×
“Besides active components, the capacitor reliability is also essential to understand and take into consideration when doing reliability analysis for the complete system [20].”
BackgroundInfluentialSelf-citationModern Electric, Hybrid Electric, and Fuel Cell Vehicles: Fundamentals, Theory, and Design
Ehsani, M., Gao, Y., Gay, S. E., & Emadi, A. (2004) · CRC Press eBooks · doi:10.1201/9781420037739 · Cited by 1,248
Closed-loop optimization of fast-charging protocols for batteries with machine learning
Attia, P. M., Grover, A., Jin, N., Severson, K. A., Markov, T. M., Liao, Y.-H., Chen, M. H., Cheong, B., Perkins, N., Yang, Z., et al. (2020) · Nature · doi:10.1038/s41586-020-1994-5 · Cited by 1,180
Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities
Wang, H., Liserre, M., & Blaabjerg, F. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2252958 · Cited by 916 · cited 1×
“knowledge base (physics of failure), a design stage (DfR and robustness validation), and an operational phase (intelligent control and condition monitoring) [10]–[12].”
BackgroundSelf-citationThe Essence of Three-Phase PFC Rectifier Systems—Part I
Kolar, J. W., & Friedli, T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2197867 · Cited by 788 · cited 1×
“Notably, depending on the topology, the HV dc bus voltage will be different [32], [33].”
BackgroundPractical Reliability Engineering
O'Connor, P. D. T., & Kleyner, A. (2011) · Wiley eBooks · doi:10.1002/9781119961260 · Cited by 783
Research works printed but not linked: 21
- 2018, The Roadmap Report Towards 2040 A Guide to Automotive Propulsion Technologies
- 2018, Shaping Future Electromobility With Semiconductor Innovations
- 2015, Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications
- ehsani, 2018, Modern Electric Hybrid Electric and Fuel Cell Vehicles
- drexhage, 2016, Effect of humidity and condensation on power electronics systems
- 2013, Electric and Electronic Components in Motor Vehicles up to 3 5t
- 2020, Electric vehicle outlook 2020
- 2013, Failure Mechanism Based Stress Test Qualification for Discrete Semiconductors in Automotive Applications REV D1
- 2017, Electrical and electronics technical team roadmap
- 2008, Vorlesung Qualtat und Zuverlassigkeit von Fahrzeug e/e Hardware an der tu Berlin
- 2010, Stress Test Qualification for Passive Components
- 2013, Zvei Die Elektroindustrie Handbook for Robustness Validation of Automotive Electrical/Electronic Modules
- allouche, 2020, Hitachi DSC Power Module From Audi e-Tron Inverter
- christmann, 2009, Reliability of power modules in hybrid vehicles, Proc PCIM Eur, 359
- 2019, Qualification of Power Modules for Use in Power Electron Converter Units in Motor Vehicles
- ishihara, 2012, New transfer-mold power module series for automotive power-train inverters, Proc PCIM Eur, 1408
- ishihara, 2014, New compact-package power modules for electric and hybrid vehicles (J1 series), Proc PCIM Eur, 1093
- kimura, 2014, High-power-density inverter technology for hybrid and electric vehicle applications, Hitachi Rev, 63, 41
- knappik, 2019, The advantages of 48-volt vehicle electronics, Veh Technol
- 2005, Standard Practices for Cycle Counting in Fatigue Analysis
- wintrich, 2015, Application Manual Power Semiconductors
Cited by
Research Development on Aqueous Ammonium‐Ion Batteries
Zhang, R., Wang, S., Chou, S., & Jin, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202112179 · Cited by 172
Ullah, Z., Wang, S., Wu, G., Hasanien, H. M., Rehman, A. U., Turky, R. A., & Elkadeem, M. R. (2022) · Energy · doi:10.1016/j.energy.2022.126560 · Cited by 157
Ten questions concerning active noise control in the built environment
Lam, B., Gan, W., Shi, D., Nishimura, M., & Elliott, S. J. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.107928 · Cited by 150
“Increased electrification of automobiles have also improved the longevity of automotive electronics to meet the expected operating life of more than ten years [160], providing a reliable infrastructure for digital ANC applications [18,156].”
BackgroundRahman, S. M. I., Moghassemi, A., Arsalan, A., Timilsina, L., Chamarthi, P. K., Papari, B., Özkan, G., & Edrington, C. S. (2024) · IEEE Access · doi:10.1109/access.2024.3385429 · Cited by 167
“The high voltage high-power PECs used in EVs face a harsh environment due to the strict operating conditions [268].”
BackgroundArtificial-Intelligence-Based Design for Circuit Parameters of Power Converters
Li, X., Zhang, X., Lin, F., & Blaabjerg, F. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3088377 · Cited by 129
“And efficiency, size, cost, reliability, ripples, and transient response are several commonlyadopted design objectives [7]–[10].”
BackgroundSelf-citationAn Overview of Lifetime Management of Power Electronic Converters
Rahimpour, S., Tarzamni, H., Kurdkandi, N. V., Husev, O. O., Vinnikov, D., & Tahami, F. (2022) · IEEE Access · doi:10.1109/access.2022.3214320 · Cited by 111
“However, the wear-out failures affect the converters’ long-term performance, and therefore predicting and assessing the lifetime of these kinds of failures is done using either model-based lifetime prediction methods or data-driven methods [15].”
MethodZhao, Z., Hu, H., He, Z. Y., Iu, H. H., Davari, P., & Blaabjerg, F. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3265278 · Cited by 109
Self-citationChakraborty, S., Hasan, M. M., McGahan, P., Tran, D.-D., Geury, T., Davari, P., Blaabjerg, F., Baghdadi, M. E., & Hegazy, O. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3083198 · Cited by 76
“Hence, the power 35 electronics converters (PECs) mounted on BEVs need to sat- 36 isfy the automotive lifetime requirements [4].”
BackgroundMethodResultInfluentialSelf-citationMartyushev, N. V., Malozyomov, B. V., Николаевна, С. С., Ефременков, Е. А., Valuev, D. V., & Qi, M. (2023) · Mathematics · doi:10.3390/math11153317 · Cited by 92
“…for standard maintenance and repair operations [41]; - analysis of types, consequences and criticality of failures, in the course of which possible types of failures of elements, their frequency characteristics, the degree of influence of these failures on the system as a whole are revealed [42,43].”
A Critical Review on Charging Technologies of Electric Vehicles
Shahjalal, M., Shams, T., Tasnim, M. N., Ahmed, M. R., Ahsan, M., & Haider, J. (2022) · Energies · doi:10.3390/en15218239 · Cited by 66
“The reliability of electronic components associated with EV converter technology ensures the reliable performance of the entire system [34,35].”
BackgroundReview of Active Thermal Control for Power Electronics: Potentials, Limitations, and Future Trends
Ibrahim, A., Salem, M., Jamil, M. K. M., Outeiro, M. T., & Desa, M. K. M. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3376086 · Cited by 71
“Advanced packaging technologies and cooling strategies that can decrease the thermal resistance, increase thermal cycling reliability, and post the peak temperature capability of the module have been summarized in [2] and [8].”
BackgroundInfluentialMartínez-Vera, E., & Bañuelos-Sánchez, P. (2024) · IEEE Latin America Transactions · doi:10.1109/tla.2024.10412031 · Cited by 80
“Power Electronics devices are considered critical enablers of current advances in vehicle electrification [19].”
BackgroundJie, H., Zhao, Z., Li, H., Wang, C., Chang, Y., & See, K. Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3454152 · Cited by 56
“The reliability and safety of power electronics devices are of paramount importance in the initial design stage, significantly affecting their operational stability, efficiency, and lifespan [6], [7], [8].”
Shi, Y., Liu, J., Ai, Y., et al. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3228440 · Cited by 52
“IN RECENT years, power electronic devices are widely used in new energy power generation, electric vehicles, and rail transit systems [1], [2].”
BackgroundFault Management Techniques to Enhance the Reliability of Power Electronic Converters: An Overview
Rahimpour, S., Husev, O. O., Vinnikov, D., Kurdkandi, N. V., & Tarzamni, H. (2023) · IEEE Access · doi:10.1109/access.2023.3242918 · Cited by 58
Wang, X., Ren, S., Xiao, D., Meng, X., Fang, G., & Wang, Z. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3306457 · Cited by 47
“The proposed scheme can be an attractive option for limited-cost drive applications involving personal and property safety, such as electric vehicle, electric train, and electric aircraft [27], [28], [29].”
BackgroundOpen-Circuit Fault Detection in PMSM Drives Using Model Predictive Control and Cost Function Error
Huang, W., Luo, L., Du, J., Xiang, B., Mei, S., Zhou, L., & Fan, Q. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3135039 · Cited by 39
“W ITH an increasing demand on the reliability and safety of electrical machine drives, the fault diagnosis technique has attracted more and more research interest during recent years [1], [2].”
BackgroundArandhakar, S., Nakka, J., Shankar, Y. R., Gaurav, G., Kishore, P. S. V., & Halder, S. (2022) · IEEE Access · doi:10.1109/access.2022.3223443 · Cited by 41
“As the temperature drops, the charging rate of the battery with a quick charger decreases [64], [66].”
BackgroundDreiling, R., Zimmermann, S., Reibstirn, M., Nguyen-Xuan, T., Schreivogel, P., & di Mare, F. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120338 · Cited by 36
Khan, F. A., Mekhilef, S., Ramachandaramurthy, V. K., Aziz, N. F. A., Pal, N., Yaseen, A., Yadav, A., Asim, M., & Alshammari, O. (2024) · Energy · doi:10.1016/j.energy.2024.131686 · Cited by 40
Reliability of Power Semiconductor Modules: A State-of-the-Art Review
Agirrezabala, E., Aizpuru, I., Garrido, D., & Portillo, A. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3576994 · Cited by 50
“Power electronics play a crucial role in ensuring the reliability and efficiency of energy conversion systems [3], [4].”
Review of Active Front-End Rectifiers in EV DC Charging Applications
Zhaksylyk, A., Rasool, H., Abramushkina, E. E., Chakraborty, S., Geury, T., Baghdadi, M. E., & Hegazy, O. (2023) · Batteries · doi:10.3390/batteries9030150 · Cited by 43
Reliability Assessment of Power Semiconductor Devices for a 13-Level Boost Inverter Topology
Siddique, M. D., Sundararajan, P., & Panda, S. K. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3253776 · Cited by 37
“Therefore, it is crucial to look into the limitations of MLIs in terms of dependability and fault tolerance [7].”
BackgroundDu, P., Liu, T., Chen, T., Jiang, M., Zhu, H., Shang, Y., Goh, H. H., HaiSen, Z. H. Z., Huang, C. C., Kong, F., et al. (2025) · Energy & Environmental Science · doi:10.1039/d5ee00116a · Cited by 43
Rehman, T., & Park, C. W. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.115219 · Cited by 34
Recent Advances in Bidirectional Converters and Regenerative Braking Systems in Electric Vehicles
Naseem, H., & Seok, J. (2025) · Actuators · doi:10.3390/act14070347 · Cited by 33
Sharida, A., Bayhan, S., & Abu‐Rub, H. (2023) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2023.3349094 · Cited by 32
“Recently, power electronics converters have been increasingly employed in many industrial applications especially in the fast electric vehicles (EVs) charging stations [1], [2].”
BackgroundOnline Condition Monitoring Methodology for Power Electronics Package Reliability Assessment
Martin, H., Smits, E. C. P., Poelma, R. H., van Driel, W. D., & Zhang, G. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3352747 · Cited by 25
Intelligent Monitoring and Maintenance Technology for Next-Generation Power Electronic Systems
van der Broeck, C. H., Kalker, S., & Doncker, R. W. D. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3119590 · Cited by 27
“POWER electronics play an increasingly important role in a wide range of highly reliable applications, such as autonomous-driving vehicles [1], [2], aerospace [3]–[5], as well as intelligent energy generation and distribution [6], [7].”
BackgroundSingle-Phase, Bidirectional, 7.7 kW Totem Pole On-Board Charging/Discharging Infrastructure
Kumar, V., & Yi, K. (2022) · Applied Sciences · doi:10.3390/app12042236 · Cited by 21
Wei, X., Yao, B., Wang, Z., Zhang, Y., Peng, Y., Sun, Y., Wang, K., & Wang, H. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3512941 · Cited by 25
“…power with low cost, the power semiconductor module in traction inverters typically adopts insulated-gate bipolar transistor (IGBT) modules, with silicon carbide (SiC) and gallium nitride (GaN) types expected to dominate in the future due to their potential for reducing system losses and size [19].”
Self-citationEnhanced Inverse Model Predictive Control for EV Chargers: Solution for DC–DC Side
Bayındır, A. B., Sharida, A., Bayhan, S., et al. (2025) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2025.3553061 · Cited by 19
Wei, X., Yao, B., Peng, Y., Sun, Y., Wang, K., & Wang, H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3383153 · Cited by 28
Self-citationAjra, Y., Hoblos, G., Sheikh, H. A., & Moubayed, N. (2024) · Machines · doi:10.3390/machines12090631 · Cited by 28
Enhanced Inverse Model Predictive Control for EV Chargers: Solution for Rectifier-Side
Sharida, A., Bayındır, A. B., Bayhan, S., et al. (2024) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2024.3435862 · Cited by 18
“In addition, EVs offer faster acceleration compared to conventional vehicles [1].”
BackgroundFast Detection of Power Transistor Faults in SRM Drives Based on Transient Pulse Injection
Ali, N., Wang, Q., Gao, Q., et al. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3293002 · Cited by 17
Yeo, S. M., Yow, H. K., Yeoh, K. H., & bin Ishak, S. H. (2022) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2022.3189995 · Cited by 17
Narasipuram, R. P., & Mopidevi, S. (2023) · International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET) · doi:10.1109/icseiet58677.2023.10303318 · Cited by 20
Machine learning-based prediction of on-state voltage for real-time health monitoring of IGBT
Thekemuriyil, T., Rohner, J. D., & Minamisawa, R. A. (2023) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2023.100049 · Cited by 16
A Multilayer Framework for Reliability Assessment of Shore-to-Ship Fast Charging System Design
Karimi, S., Zadeh, M., & Suul, J. A. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3105516 · Cited by 17
dos Santos, N. G. F., Zientarski, J. R. R., & Martins, M. L. D. S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3426947 · Cited by 15
Kardan, F., Shekhar, A., & Bauer, P. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3458813 · Cited by 15
“…studies have done mission profile-based reliability assessments across a range of applications, including PV, wind, drive train, aerospace, and onboard chargers [18], [19], [20], there remains a gap in investigating reliability analysis based on the battery load in the context of DC fast chargers.”
BackgroundTransient Electro-Thermal Coupled Modeling of Three-Phase Power MOSFET Inverter during Load Cycles
Cheng, H., Lin, S.-Y., & Liu, Y.-C. (2021) · Materials · doi:10.3390/ma14185427 · Cited by 15
“In order to ensure the safe and normal operation of power devices, the device junction temperature should be operated below the nominal rated temperature [11].”
BackgroundMartin, G. E., Baghdadi, M. E., & Hegazy, O. (2025) · IEEE Access · doi:10.1109/access.2025.3599627 · Cited by 27
“Although SiC devices are theoretically capable of operating at temperatures exceeding 400 ◦ C, practical constraints related to packaging reliability currently limit commercial operation to approximately 175 ◦ C [61], [62].”
InfluentialXiao, Y., Goyal, G. K., Su, J., Abbasi, H. R., Yan, H., Yao, X., Tantratian, K., Yan, Z., Alksninis, A., Phipps, M., et al. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108309 · Cited by 17
Gupta, P., Gurulakshmi, A. B., Nijhawan, G., Praveen, P., Tyagi, L. K., & Hussien, R. A. (2024) · E3S Web of Conferences · doi:10.1051/e3sconf/202450503017 · Cited by 15
“This mechanism helps to mitigate false positives, ensuring that maintenance actions are only suggested when there is a high probability of an impending failure [30-31].”
BackgroundRetractedReliability Estimation of Wired and Wireless Fast Electric Vehicle Charging Systems
Karunarathna, J. S., Madawala, U. K., Blaabjerg, F., Sandelić, M., & Zhang, K. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3441549 · Cited by 18
Self-citationIbrahim, K. A., Luk, P. C. K., Luo, Z., Ng, S. Y., & Harrison, L. (2025) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2025.110248 · Cited by 18
Karmakar, A., Sadhu, P. K., Das, S., Bihari, S. P., Khan, B., & Ali, A. A. (2025) · Discover Sustainability · doi:10.1007/s43621-025-01119-7 · Cited by 12
“Implementing this concept requires a large power charging infrastructure and also ensuring the sustainability section which must be 100% renewable [4, 5].”
Fahad, M., Alsultan, M., Ahmad, S., Sarwar, A., Tariq, M., & Khan, I. (2021) · Electronics · doi:10.3390/electronics11010098 · Cited by 17
“In field systems, it is observed that the power electronic converters are generally the least reliable assemblies and create significant maintenance costs [14].”
BackgroundData-Driven Thermal Modelling for Anomaly Detection in Electric Vehicle Charging Stations
Gómez, P. I., Barragán-Moreno, A., Lin, J., et al. (2022) · IEEE Transportation Electrification Conference & Expo (ITEC) · doi:10.1109/itec53557.2022.9813767 · Cited by 11
“• Temperature stress is one of the main causes of the destruction of power electronic components, and maximum steady-state temperature is one of the two halves of this type of stress, with the other being temperature cycling [13].”
BackgroundParameter Design Optimization for DC-DC Power Converters with Deep Reinforcement Learning
Tian, F., Cobaleda, D. B., Wouters, H., & Martinez, W. H. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9948201 · Cited by 12
“The demand for power converter design is increasing as a consequence of their extensive use in novel decarbonization applications, such as renewable energy systems [1] and electric mobility [2].”
BackgroundHigh-Bandwidth Differential Voltage Probe for Accurate Switching Characterization of WBG Devices
Wang, Y., Gong, J., Wang, L., et al. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3401011 · Cited by 11
A High-Efficient Single-Switch Switched-Capacitor Partial Power Converter for On-Board Chargers
dos Santos, N. G. F., Toebe, A., Löbler, P. H. B., Schuch, L., Martins, M. L. D. S., & Rech, C. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3443519 · Cited by 14
Wei, M., Huang, S. H., Liang, G., et al. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3516118 · Cited by 11
“T HE two-level voltage-source inverter (VSI) is widely used in various applications, such as wind and photovoltaic generation, power transmission, motor drives, and electric vehicles, due to its cost-effectiveness, reliability, and compact design [1], [2], [3], [4].”
Ruppert, L. A., Kalker, S., & Doncker, R. W. D. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595734 · Cited by 17
Hadraoui, H. E., Laayati, O., Maghraoui, A. E., Sabani, E., Zegrari, M., & Chebak, A. (2023) · International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) · doi:10.1109/iceccme57830.2023.10253328 · Cited by 13
Advancements in fault detection and diagnosis methods for electric vehicles: a review
Kumar, M. P., Velpula, S., Saiprakash, C., & Sahoo, B. (2025) · Discover Applied Sciences · doi:10.1007/s42452-025-07758-9 · Cited by 19
“Different power converter configurations are used in EVs for power conversion and control of the drives [36–39].”
Chakraborty, S., Bhoi, S. K., Hosseinabadi, F., Davari, P., Blaabjerg, F., & Hegazy, O. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3391930 · Cited by 12
“A comprehensive list of multiscale and multiphysics tools has been identified in [7], [8], [9], [10], [11], [12], [13], [14], [15], [16], [17], [18], [19], [20], [21], [23], and [28] for the PoF-based reliability assessment.”
InfluentialSelf-citationLai, W., Shangguan, M., Shi, J., Li, H., Wu, Y., Yao, R., Wang, H., Jing, H., & Li, Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3518062 · Cited by 9
Self-citationLakkaraju, A. R., Rao, J. M., Gupta, K. K., et al. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.112741 · Cited by 9
Advanced Solid-State Lithium Battery and Its Safety
Zhao, Z. (2023) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2023.00027 · Cited by 11
Solder void size reduction in semiconductor package by vacuum reflow and pressure cure processes
Yeo, S. M., Yow, H. K., & Yeoh, K. H. (2022) · Soldering and Surface Mount Technology · doi:10.1108/ssmt-05-2021-0018 · Cited by 9
Egin Martin, G., Verbrugge, B., Mahedi Hasan, M., El Baghdadi, M., Romano, C., & Hegazy, O. (2025) · IEEE Access · doi:10.1109/access.2025.3612315 · Cited by 8
Verbrugge, B., Rasool, H., Hasan, M. M., Chakraborty, S., Geury, T., Baghdadi, M. E., & Hegazy, O. (2022) · Energies · doi:10.3390/en16010153 · Cited by 8
Reliability Improvement of Voltage Regulator Modules by a Virtual Series Voltage Source
Zhao, Z., Zhou, D., Wang, H., Davari, P., & Blaabjerg, F. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3140525 · Cited by 8
“Recently, many efforts have been made to investigate the reliability of power electronic converters, and the mission profile-based method is the state-of-the-art one [16].”
BackgroundMethodInfluentialSelf-citationElectrical Chip-Package-Board Reliability of 2.5-D/3-D HI Packaged Systems: A Perspective
Alam, M. A., & Mamun, M. A. Z. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3467034 · Cited by 7
“For example, in the next generation of autonomous vehicles, a plethora of electrical systems and sensors need to be heterogeneously integrated to execute reliable sensing, rapid information processing, and accurate navigation regardless of ambient circumstances [1], [2].”
Second life potential of electric vehicle power electronics for more circular economies
Alatise, O. M., Wu, R., Deb, A., & Gonzalez, J. A. O. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.115238 · Cited by 7
Simulation-based FMEA for the reliability assessment of printed circuit boards
Schmidt, H., Käß, M., Lichtinger, R., et al. (2025) · Microelectronics Reliability · doi:10.1016/j.microrel.2025.115613 · Cited by 7
Li, X., Lin, F., Sun, C., Zhang, X., Ma, H., Wen, C., Blaabjerg, F., & Mantooth, H. A. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3406858 · Cited by 10
“They foster wide electri fi cation in various industry sectors, such as ac/dc microgrids [1], wireless power transfer [2], green buildings [3], electric vehicles [4], vessels [5], aircraft [6], and even future manned lunar bases [7], furthering the carbon neutral and the welfare of humankind.”
Self-citationIbrahim, A., Salem, M., Swadi, M., et al. (2024) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2024.100876 · Cited by 7
Hamdi, R., Torkaman, H., & Amraei, A. (2024) · doi:10.1109/icemd64575.2024.10963408 · Cited by 8
“As global warming receives heightened scrutiny and transportation electrification is prioritized, the need for a high power density and a high-efficiency OBC for rechargeable EVs has markedly increased [1-4].”
Mamun, M. A. Z., & Alam, M. A. (2022) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps48227.2022.9764577 · Cited by 7
Heterogeneous Integration of Diamond Heat Spreaders for Power Electronics Application
Martin, H., Reintjes, M., Reijs, D., Dorrestein, S., Kengen, M., Libon, S., Smits, E. C. P., Tang, X., Koelink, M., Poelma, R. H., et al. (2023) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc51909.2023.00029 · Cited by 7
“Device failure due to thermal breakdown is significantly higher than vibrations, humidity, and dust [5; 6].”
BackgroundReal time conditioning monitoring of MOSFET using artificial neural network regression
Choudhary, K., Babu, R., Christie, L., & Mahto, M. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad4b50 · Cited by 7
“For power electronic systems, the initial stage toward implementing prognostics and health management is to investigate the degradation technique of MOSFETs [5].”
A Review: Charging infrastructure optimisation to support widespread adoption of electric vehicles
Okika, M. C., & Musonda, I. (2025) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2025.101069 · Cited by 18
Impact of Parameter Uncertainties on Power Electronic Device Lifetime Predictions
Kardan, F., Shekhar, A., & Bauer, P. (2025) · IEEE Access · doi:10.1109/access.2025.3576930 · Cited by 11
Manikandan, R., & Singh, R. R. (2023) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2023.3310671 · Cited by 6
“Since, NPC inverters have balanced DC link capacitor voltage, reduced harmonics, and switching stresses [2].”
BackgroundMonte Carlo Statistical Tolerance Analysis of a Parallel-Plate Multichip Power Module
Lester, D., Cairnie, M., & DiMarino, C. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3439473 · Cited by 6
An Online Monitoring Method of IGBT Junction Temperature Based on Turn-Off Miller Plateau Current
Cao, H., Yang, K., Xu, P., Chen, J., Song, W., & Feng, X. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3528405 · Cited by 8
DC-link Capacitance Estimation based on Discharge Profile of Inverter for EV Application
Wei, X., Peng, Y., Yao, B., & Wang, H. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213625 · Cited by 6
“However, due to the harsh operating and environmental conditions in field applications, the DC-link capacitor is a stand-out component in terms of failure rate in the electric drive system [3-6].”
BackgroundSelf-citationAdaptive Fault-Tolerant Communication Based-Control for Parallel Connected Rectifiers
Sharida, A., Kamal, N. F., Bayhan, S., et al. (2023) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2023.3342071 · Cited by 6
“Moreover, they are considered as the backbone of the electrical vehicle (EV) charging stations, as a single rectifier usually does not meet the power requirements to fast charge EVs [4], [5].”
BackgroundZhang, C., Jasni, J., Radzi, M. A. M., Azis, N. B., & He, X. (2023) · Ionics · doi:10.1007/s11581-023-05062-3 · Cited by 7
Mamun, M. A. Z., & Alam, M. A. (2023) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2023.3288733 · Cited by 6
Applications of artificial intelligence in the circuit and modulation design of DC-DC converters
Li, X. (2023) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/165390 · Cited by 6
Yang, K., Liu, B., Tan, H., et al. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3583674 · Cited by 5
Self-citationWei, X., Tang, X., Wang, L., Wang, J., Wang, Y., Li, L., Du, Y., & Dai, A. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3632265 · Cited by 7
“[5] with other application fields such as energy generation and consumption [11], [13], the development of power semiconductor devices in HVDC transmission systems started late, device design and engineering applications are relatively lagging.”
Microgrid Design For EV Fast Charging Station Using Interleaved DC-DC Converter
Vendoti, S., Swami, K. A., Govindaraju, S. K., et al. (2023) · International Conference for Advancement in Technology (ICONAT) · doi:10.1109/iconat57137.2023.10080139 · Cited by 5
Rehman, A. U., Park, H., Ahmed, A., Kim, M., & Jung, J. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3406849 · Cited by 5
“Improving power density and ef fi ciency while reducing the cost is imperative, however, it is equally crucial during the design phase to prioritize a reliable operation by reducing the risks of failures from overstress, overheating, and early aging of the power devices [2], [24].”
InfluentialSiddique, M. D., Sundararajan, P., Sahani, M., & Panda, S. K. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3481666 · Cited by 7
“As a result, it is essential to investigate the constraints of MLIs with regard to dependability and fault tolerance [40], [41].”
Advanced Power Electronics Interface for Designing Electric Vehicle Charging Architecture
Kalaivani, C., Pameela, M., Poornima, S., Kandasamy, J., Jaisiva, S., & Harish, R. (2024) · doi:10.1109/c2i663243.2024.10895229 · Cited by 5
“Several nations have enacted laws that support this objective [2].”
Hierarchical Control of DC Coupled Fast EV Charging Station
Sharida, A., Bayındır, A. B., Bayhan, S., & Abu‐Rub, H. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3560343 · Cited by 8
Laspeyres, A., Descamps, A.-S. B., Batard, C., Ginot, N., Le, T.-L., & Azzopardi, S. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131211 · Cited by 6
“This will allow higher efficiency in a wide range of reliable applications such as aerospace [2] or autonomousdriving vehicles [3].”
BackgroundPadros, M. S., Schirmer, P. A., & Mporas, I. (2022) · European Signal Processing Conference (EUSIPCO) · doi:10.23919/eusipco55093.2022.9909690 · Cited by 5
“the temperatures of semiconductor or capacitors, is essential to avoid excessive damage and ageing of the components in Battery Electric vehicles (BEVs) [1] and is addressed by thermal modelling twofold.”
BackgroundA Real-time design and analysis of Dual Active Bridge DC-DC converter for EV applications
N, P. A. V. V., Chilakalapudi, G., Panchbhai, A., & Kumar, A. (2023) · IEEE Silchar Subsection Conference (SILCON) · doi:10.1109/silcon59133.2023.10404787 · Cited by 5
“The author stated that the [1]Renewable energy sources can be used to generate power and can give to EVs also so that maximum pollution can be eliminated from these Power Plants.”
BackgroundKumar, P., & Channi, H. K. (2024) · International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies (ICAECT) · doi:10.1109/icaect60202.2024.10469488 · Cited by 6
“Furthermore, it is imperative to utilize renewable and sustainable energy sources in order to supply the necessary electricity for charging EVs [3, 4].”
BackgroundThe Impact of the Speed and Temperature Variation on the Electric Vehicles Reliability
Ghaedi, A., Mahmoudian, M., & Sedaghati, R. (2022) · International Transactions on Electrical Energy Systems · doi:10.1155/2022/4876218 · Cited by 5
“In [24], a reliability assessment of power electronic components used in hybrid and all-electric vehicles is performed.”
BackgroundThe reliability challenge of SiC Power Modules in Automotive Applications
Calabretta, M., Sitta, A., Mauromicale, G., et al. (2022) · International Conference on Advanced Semiconductor Devices and Microsystems · doi:10.1109/asdam55965.2022.9966752 · Cited by 5
“They can be combined in different topologies, such as DC-DC converter, on-board chargers, and in traction inverter, to manage energy flow inside the car [1].”
BackgroundImproved Power Quality of Single Phase On-Board Charger with Wide Voltage Conversion Range
Vinusha, B., Kalpana, R., & Kishan, D. (2023) · IEEE IAS Global Conference on Renewable Energy and Hydrogen Technologies (GlobConHT) · doi:10.1109/globconht56829.2023.10087583 · Cited by 5
“I. INTRODUCTION In the transportation industry, due to continuous increase in energy demand and depletion of fossil fuels moves world’s attention towards Electric vehicles (EVs), to get Ecofriendly environment by reducing Co2 emissions.”
BackgroundInfluentialLiu, H., Qiu, J., Zhang, W., et al. (2023) · Frontiers in Electronics · doi:10.3389/felec.2023.1226006 · Cited by 5
Metadata
- Authors
- Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P.
- Affiliations
- Aalborg University (DK)
- Venue
- Proceedings of the IEEE
- Published
- 2021-06
- Volume
- 109
- Issue
- 6
- Pages
- 1060-1076
- ISSN
- 0018-9219 (ISSN-L)
- 1558-2256
- OpenAlex
- W3095570029
- Cited by
- 249
- References
- 88
- Citations by year
- 2026: 35 · 2025: 57 · 2024: 67 · 2023: 52 · 2022: 23 · 2021: 15
- FWCI
- 7.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Proceedings of the IEEE (publishedVersion, cc-by)
- VBN Forskningsportal (Aalborg Universitet) (publishedVersion, cc-by)
- Funders
- VILLUM FONDEN under the VILLUM Investigators (00016591)
- Innovation Fund Denmark through the Advanced Power Electronic Technology and Tools Project
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Power Systems and Control
- Keywords
- power electronics reliability, electric vehicles, hybrid electric vehicles, reliability requirements, power electronic components, reliability-oriented design, on-board charger, inverter, vehicle electrification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.