The DOI matches its Crossref record; 151 of the 151 references it cites were found in a registry or an index.
Advanced Fault Diagnosis for Lithium-Ion Battery Systems: A Review of Fault Mechanisms, Fault Features, and Diagnosis Procedures
Abstract
Lithium (Li)-ion batteries have become the mainstream energy storage solution for many applications, such as electric vehicles (EVs) and smart grids. However, various faults in a Li-ion battery system (LIBS) can potentially cause performance degradation and severe safety issues. Developing advanced fault diagnosis technologies is becoming increasingly critical for the safe operation of LIBS. This article provides a comprehensive review of the mechanisms, features, and diagnosis of various faults in LIBSs, including internal battery faults, sensor faults, and actuator faults. Future trends in the development of fault diagnosis technologies for a safer battery system are presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physiological time-series analysis using approximate entropy and sample entropy
Richman, J. S., & Moorman, J. R. (2000) · American Journal of Physiology-Heart and Circulatory Physiology · doi:10.1152/ajpheart.2000.278.6.h2039 · Cited by 7,880
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Process fault detection based on modeling and estimation methods—A survey
Isermann, R. (1984) · Automatica · doi:10.1016/0005-1098(84)90098-0 · Cited by 2,364
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 1×
“Typical battery models for sensor fault diagnosis include the EM [160]-[162], ECM [163]-[167], lumped-parameter thermal models [168], [169], and two-state lumped parameter thermal models [52].”
MethodSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Support vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Model-based fault-detection and diagnosis – status and applications
Isermann, R. (2005) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2004.12.002 · Cited by 1,579
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00161-8 · Cited by 1,530
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408 · cited 2×
“Accelerated battery degradation is caused by undesired side reactions within a cell, which are accompanied by the losses of cyclable Li ions and active material [89], [90].”
BackgroundA Survey of Fault Detection, Isolation, and Reconfiguration Methods
Hwang, I., Kim, S., Kim, Y., & Seah, C. E. (2010) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2009.2026285 · Cited by 1,305
Model-Based Fault Detection and Diagnosis - Status and Applications
Isermann, R. (2004) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)32149-3 · Cited by 1,262
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,183
Methods for state-of-charge determination and their applications
Piller, S., Perrin, M., & Jossen, A. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00560-2 · Cited by 1,162
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Fault diagnosis in dynamic systems : theory and applications
Patton, R. J., Frank, P. M., & Clarke, R. N. (1989) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,066
The Measurement, Instrumentation and Sensors Handbook
Webster, J. G. (1998) · CRC Press eBooks · doi:10.1201/9781003040019 · Cited by 1,029
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
State estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857
Self-citationSafety focused modeling of lithium-ion batteries: A review
Abada, S., Marlair, G., Lecocq, A., Petit, M., Sauvant-Moynot, V., & Huet, F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.100 · Cited by 819
Development of First Principles Capacity Fade Model for Li-Ion Cells
Ramadass, P., Haran, B., Gomadam, P. M., White, R., & Popov, B. N. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1634273 · Cited by 794
SAMANTA, B., & AL-BALUSHI, K. R. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1462 · Cited by 760
A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions
Wen, J., Yu, Y., & Chen, C. (2012) · Materials Express · doi:10.1166/mex.2012.1075 · Cited by 754
Rezvanizaniani, S. M., Liu, Z., Chen, Y., & Lee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.085 · Cited by 684
Identify capacity fading mechanism in a commercial LiFePO4 cell
Dubarry, M., & Liaw, B. Y. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.036 · Cited by 675
Fault-Tolerant Control: The 1997 Situation
Patton, R. J. (1997) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)42536-5 · Cited by 640
Nam, K., Bak, S., Hu, E., Yu, X., Zhou, Y., Wang, X., Wu, L., Zhu, Y., Chung, K. Y., & Yang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200693 · Cited by 594
Huet, F. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02665-7 · Cited by 593
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Feng, X., Sun, J., Ouyang, M., Wang, F., He, X., Lu, L., & Peng, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.017 · Cited by 589
The formation and stability of the solid electrolyte interface on the graphite anode
Agubra, V. A., & Fergus, J. W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.024 · Cited by 526
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Hu, X., Zheng, Y., Howey, D. A., Perez, H., Foley, A., & Pecht, M. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100806 · Cited by 443
Self-citationModeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions
Sahraei, E., Campbell, J., & Wierzbicki, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.057 · Cited by 401
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries
Hendricks, C., Williard, N., Mathew, S., & Pecht, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.100 · Cited by 381
Fault and defect diagnosis of battery for electric vehicles based on big data analysis methods
Zhao, Y., Liu, P., Wang, Z., Zhang, L., & Hong, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.139 · Cited by 375
Analysis of internal short-circuit in a lithium ion cell
Santhanagopalan, S., Ramadass, P., & Zhang, J. (. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.002 · Cited by 351
Lin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
Self-citationMathematical modeling of lithium-ion and nickel battery systems
Gomadam, P. M., Weidner, J. W., Dougal, R. A., & White, R. E. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00190-8 · Cited by 344
Simulation and experimental study on lithium ion battery short circuit
Zhao, R., Liu, J., & Gu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.016 · Cited by 342
Failure mechanism of the lithium ion battery during nail penetration
Mao, B., Chen, H., Cui, Z., Wu, T., & Wang, Q. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.036 · Cited by 340
A correlation based fault detection method for short circuits in battery packs
Xia, B., Shang, Y., Nguyen, T., & Mi, C. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.007 · Cited by 337
Failure propagation in multi-cell lithium ion batteries
Lamb, J., Orendorff, C. J., Steele, L. A. M., & Spangler, S. W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.081 · Cited by 335
Li-ion battery SOC estimation method based on the reduced order extended Kalman filtering
Lee, J., Nam, O., & Cho, B. H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.072 · Cited by 331
Lessons Learned from the 787 Dreamliner Issue on Lithium-Ion Battery Reliability
Williard, N., He, W., Hendricks, C., & Pecht, M. (2013) · Energies · doi:10.3390/en6094682 · Cited by 324
Feng, X., Pan, Y., He, X., Wang, L., & Ouyang, M. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.04.020 · Cited by 324
Liu, G., Ouyang, M., Lu, L., Li, J., & Han, X. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3599-9 · Cited by 319
Internal short circuit in Li-ion cells
Maleki, H., & Howard, J. N. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.070 · Cited by 313
Internal short circuit detection for battery pack using equivalent parameter and consistency method
Ouyang, M., Zhang, M., Feng, X., Lu, L., Li, J., He, X., & Zheng, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.087 · Cited by 309 · cited 2×
“Because the experimental test methods are costly and time consuming, a lot of research has been devoted to developing a high-fidelity model that can simulate battery failure behavior, such as the ECM [60], [117], two-state thermal model [118], electrochemical–thermal model [119], [120], 3D electrochemical–thermal mode…”
BackgroundMethodYe, J., Chen, H., Wang, Q., Huang, P., Sun, J., & Lo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.124 · Cited by 304
Wang, Z., Hong, J., Liu, P., & Zhang, L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.143 · Cited by 303
Effects of overdischarge on performance and thermal stability of a Li-ion cell
Maleki, H., & Howard, J. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.043 · Cited by 302
Adaptive Nonlinear Model-Based Fault Diagnosis of Li-Ion Batteries
Sidhu, A., Izadian, A., & Anwar, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336599 · Cited by 283
Gao, W., Zheng, Y., Ouyang, M., Li, J., Lai, X., & Hu, X. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2838109 · Cited by 267
Self-citationCell degradation in commercial LiFePO4 cells with high-power and high-energy designs
Dubarry, M., Truchot, C., & Liaw, B. Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.052 · Cited by 266
Diagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D. P., Roth, E. P., Kostecki, R., McCarthy, K., MacLaren, S., & Doughty, D. H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 261
GEAR FAULT DIAGNOSIS BASED ON CONTINUOUS WAVELET TRANSFORM
ZHENG, H., LI, Z., & CHEN, X. (2002) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2002.1482 · Cited by 260
Liu, Z., & He, H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.168 · Cited by 258
Zhang, C., Santhanagopalan, S., Sprague, M. A., & Pesaran, A. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.162 · Cited by 257
An Efficient Algorithm for Finding Minimal Overconstrained Subsystems for Model-Based Diagnosis
Krysander, M., Åslund, J., & Nyberg, M. (2007) · IEEE Transactions on Systems Man and Cybernetics - Part A Systems and Humans · doi:10.1109/tsmca.2007.909555 · Cited by 238
Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery
(2017) · Elsevier eBooks · doi:10.1016/c2016-0-00367-4 · Cited by 224
Sahraei, E., Bosco, E., Dixon, B., & Lai, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.005 · Cited by 222
Yang, R., Xiong, R., He, H., & Chen, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.259 · Cited by 218
Ladpli, P., Kopsaftopoulos, F., & Chang, F.-K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.056 · Cited by 214
Sensor Placement for Fault Diagnosis
Krysander, M., & Frisk, E. (2008) · IEEE Transactions on Systems Man and Cybernetics - Part A Systems and Humans · doi:10.1109/tsmca.2008.2003968 · Cited by 214
Modeling, Detection, and Disambiguation of Sensor Faults for Aerospace Applications
Balaban, E., Saxena, A., Bansal, P., Goebel, K. F., & Curran, S. (2009) · IEEE Sensors Journal · doi:10.1109/jsen.2009.2030284 · Cited by 213
Dynamic Thermal Model of Li-Ion Battery for Predictive Behavior in Hybrid and Fuel Cell Vehicles
Park, C., & Jaura, A. K. (2003) · SAE Technical Paper Series · doi:10.4271/2003-01-2286 · Cited by 205
Module design and fault diagnosis in electric vehicle batteries
Offer, G. J., Yufit, V., Howey, D. A., Wu, B., & Brandon, N. P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.087 · Cited by 203
Characterization of large format lithium ion battery exposed to extremely high temperature
Feng, X., Sun, J., Ouyang, M., He, X., Lu, L., Han, X., Fang, M., & Peng, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.094 · Cited by 201
Kong, X., Zheng, Y., Ouyang, M., Lu, L., Li, J., & Zhang, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.097 · Cited by 201
Zheng, Y., Han, X., Lu, L., Li, J., & Ouyang, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.015 · Cited by 194
A novel fault diagnosis method for lithium-Ion battery packs of electric vehicles
Li, X., & Wang, Z. (2018) · Measurement · doi:10.1016/j.measurement.2017.11.034 · Cited by 192
Model-Based Battery Thermal Fault Diagnostics: Algorithms, Analysis, and Experiments
Dey, S., Perez, H. E., & Moura, S. J. (2019) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2017.2776218 · Cited by 191
Self-citationKang, Y., Duan, B., Zhou, Z., Shang, Y., & Zhang, C. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.058 · Cited by 191
An enhanced multi-state estimation hierarchy for advanced lithium-ion battery management
Hu, X., Jiang, H., Feng, F., & Liu, B. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114019 · Cited by 186
Self-citationChallenges in the industrial applications of fault diagnostic systems
Dash, S., & Venkatasubramanian, V. (2000) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(00)00374-4 · Cited by 182
Liu, X.-Q., Zhang, H.-Y., Liu, J., & Yang, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873210 · Cited by 180
Differential voltage analyses of high-power lithium-ion cells
Bloom, I., Christophersen, J. P., Abraham, D. P., & Gering, K. L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.054 · Cited by 178
Taheri, P., Hsieh, S., & Bahrami, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.056 · Cited by 178
Fang, W., Ramadass, P., & Zhang, Z. (. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.004 · Cited by 177
Liu, Z., Yin, X., Zhang, Z., Chen, D., & Chen, W. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.832052 · Cited by 172
Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells
Cai, W., Wang, H., Maleki, H., Howard, J. N., & Lara‐Curzio, E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.04.024 · Cited by 169
Sensor Fault Detection, Isolation, and Estimation in Lithium-Ion Batteries
Dey, S., Mohon, S., Pisu, P., & Ayalew, B. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2016.2538200 · Cited by 169
Self-citationA Review on Fault Mechanism and Diagnosis Approach for Li‐Ion Batteries
Wu, C., Zhu, C., Ge, Y., & Zhao, Y. (2015) · Journal of Nanomaterials · doi:10.1155/2015/631263 · Cited by 163
Chen, W., Chen, W.-T., Saif, M., Li, M.-F., & Wu, H. (2014) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2013.2239296 · Cited by 163
Fault detection and diagnosis in aerospace systems using analytical redundancy
Patton, R. J. (1991) · Computing & Control Engineering Journal · doi:10.1049/cce:19910031 · Cited by 160
Model-based real-time thermal fault diagnosis of Lithium-ion batteries
Dey, S., Biron, Z. A., Tatipamula, S., Das, N., Mohon, S., Ayalew, B., & Pisu, P. (2016) · Control Engineering Practice · doi:10.1016/j.conengprac.2016.08.002 · Cited by 158
Self-citationHan, X., Ouyang, M., Lu, L., & Li, J. (2014) · Energies · doi:10.3390/en7084895 · Cited by 156
Yao, L. Y., Wang, Z., & Jun, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.090 · Cited by 151
Filippetti, F., Martelli, M., Franceschini, G., et al. (2003) · doi:10.1109/ias.1992.244459 · Cited by 149
Zhang, C., Santhanagopalan, S., Sprague, M., & Pesaran, A. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.049 · Cited by 146
Kim, T., Makwana, D., Adhikaree, A., Vagdoda, J., & Lee, Y. (2018) · Energies · doi:10.3390/en11010125 · Cited by 142
A Comparative Study of Control-Oriented Thermal Models for Cylindrical Li-Ion Batteries
Hu, X., Liu, W., Lin, X., & Xie, Y. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2953606 · Cited by 142
Self-citationFail-safe design for large capacity lithium-ion battery systems
Kim, G., Smith, K. A., Ireland, J. C., & Pesaran, A. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.015 · Cited by 140
Wang, H., Simunovic, S., Maleki, H., Howard, J. N., & Hallmark, J. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.026 · Cited by 140
Zhang, L., Ma, Y., Cheng, X., Du, C., Guan, T., Cui, Y., Sun, S., Zuo, P., Gao, Y., & Yin, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.040 · Cited by 138
100 Wh Large size Li-ion batteries and safety tests
Kitoh, K., & Nemoto, H. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00125-1 · Cited by 131
Combustion behavior of lithium iron phosphate battery induced by external heat radiation
Wang, Q., Huang, P., Ping, P., Du, Y., Li, K., & Sun, J. (2016) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2016.12.002 · Cited by 127
Feng, X., He, X., Lu, L., & Ouyang, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0501802jes · Cited by 126
Diagnosis of power fade mechanisms in high-power lithium-ion cells
Abraham, D. P., Liu, J., Chen, C. H., Hyung, Y.-E., Stoll, M., Elsen, N., MacLaren, S., Twesten, R. D., Haasch, R. T., Sammann, E., et al. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00275-1 · Cited by 124
A fault-tolerant voltage measurement method for series connected battery packs
Xia, B., & Mi, C. C. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.057 · Cited by 117
Ramadass, P., Fang, W., & Zhang, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.145 · Cited by 115
Effect of Overdischarge on Swelling and Recharge Performance of Lithium Ion Cells
Hui‐Fang, L. I., Gao, J., & Zhang, S. (2008) · Chinese Journal of Chemistry · doi:10.1002/cjoc.200890286 · Cited by 112
Model-based Sensor Fault Diagnosis of a Lithium-ion Battery in Electric Vehicles
Liu, Z., & He, H. (2015) · Energies · doi:10.3390/en8076509 · Cited by 111
Li-ion battery parameter estimation for state of charge
Tang, X., Mao, X., Lin, J., & Koch, B. J. (2011) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2011.5990963 · Cited by 107
Spinner, N. S., Field, C. R., Hammond, M. H., Williams, B. A., Myers, K. M., Lubrano, A. L., Rose‐Pehrsson, S. L., & Tuttle, S. G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.068 · Cited by 104
Actuator fault detection and isolation: An optimised parity space approach
Odendaal, H. M., & Jones, T. (2014) · Control Engineering Practice · doi:10.1016/j.conengprac.2014.01.013 · Cited by 103
Support vector machines for detection and characterization of rolling element bearing faults
Jack, L. B., & Nandi, A. K. (2001) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/095440620121500907 · Cited by 101
External short circuit fault diagnosis for lithium-ion batteries
Xia, B., Chen, Z., Mi, C. C., & Robert, B. (2014) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2014.6861806 · Cited by 94
Big-Data-Based Thermal Runaway Prognosis of Battery Systems for Electric Vehicles
Hong, J., Wang, Z., & Liu, P. (2017) · Energies · doi:10.3390/en10070919 · Cited by 91
Liu, Z., Ahmed, Q., Zhang, J., Rizzoni, G., & He, H. (2016) · Control Engineering Practice · doi:10.1016/j.conengprac.2016.03.015 · Cited by 90
Influence of overcharge and over-discharge on the impedance response of LiCoO2|C batteries
Erol, S., Orazem, M. E., & Muller, R. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.038 · Cited by 87
Entropy-Based Voltage Fault Diagnosis of Battery Systems for Electric Vehicles
Liu, P., Sun, Z., Wang, Z., & Zhang, J. (2018) · Energies · doi:10.3390/en11010136 · Cited by 87
Failure modes and mechanisms for rechargeable Lithium-based batteries: a state-of-the-art review
Lyu, D., Ren, B., & Li, S. (2018) · Acta Mechanica · doi:10.1007/s00707-018-2327-8 · Cited by 86
Smarsly, K., & Law, K. H. (2014) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2014.02.005 · Cited by 85
Model-based electrochemical estimation of lithium-ion batteries
Smith, K. A., Rahn, C. D., & Wang, C. (2008) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.2008.4629589 · Cited by 85
Svärd, C., & Nyberg, M. (2010) · IEEE Transactions on Systems Man and Cybernetics - Part A Systems and Humans · doi:10.1109/tsmca.2010.2049993 · Cited by 78
Detection of Internal Short Circuit in Lithium Ion Battery Using Model-Based Switching Model Method
Seo, M., Goh, T., Park, M., Koo, G., & Kim, S. (2017) · Energies · doi:10.3390/en10010076 · Cited by 78
Fault diagnosis of Li-Ion batteries using multiple-model adaptive estimation
Singh, A., Izadian, A., & Anwar, S. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699695 · Cited by 76
Preventing Li-ion cell explosion during thermal runaway with reduced pressure
Hofmann, A., Uhlmann, N., Ziebert, C., Wiegand, O., Schmidt, A., & Hanemann, T. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.056 · Cited by 73
Nonlinear Fault Detection and Isolation for a Lithium-Ion Battery Management System
Marcicki, J., Onori, S., & Rizzoni, G. (2010) · Proceedings of the ASME Dynamic Systems and Control Conference · doi:10.1115/dscc2010-4085 · Cited by 70
Self-citationData-Driven Technology for Engineering Systems Health Management
Niu, G. (2016) · Springer eBooks · doi:10.1007/978-981-10-2032-2 · Cited by 66
Xu, J., Wang, J., Li, S., & Cao, B. (2016) · Sensors · doi:10.3390/s16081328 · Cited by 66
The improved interleaved voltage measurement method for series connected battery packs
Xia, B., Nguyen, T. Q., Yang, J., & Mi, C. C. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.167 · Cited by 62
Automotive engine FDI by application of an automated model-based and data-driven design methodology
Svärd, C., Nyberg, M., Frisk, E., & Krysander, M. (2013) · Control Engineering Practice · doi:10.1016/j.conengprac.2012.12.006 · Cited by 55
Adaptive Extended Kalman Filter Based Fault Detection and Isolation for a Lithium-Ion Battery Pack
He, H., Liu, Z., & Hua, Y. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.07.230 · Cited by 55
Electrochemical Model Based Fault Diagnosis of Li-Ion Battery Using Fuzzy Logic
Muddappa, V. K. S., & Anwar, S. (2014) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2014-37134 · Cited by 53
Method for Classification of Battery Separator Defects Using Optical Inspection
Huber, J., Tammer, C., Krotil, S., Waidmann, S., Hao, X., Seidel, C., & Reinhart, G. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.11.101 · Cited by 52
Liu, Z., Ahmed, Q., Rizzoni, G., & He, H. (2014) · doi:10.1115/dscc2014-6101 · Cited by 49
Embedded Fiber Optic Sensing for Accurate State Estimation in Advanced Battery Management Systems
Sommer, L. W., Raghavan, A., Kiesel, P., Saha, B., Staudt, T., Lochbaum, A., Ganguli, A., Bae, C., & Alamgir, M. (2014) · MRS Proceedings · doi:10.1557/opl.2014.560 · Cited by 48
Real-time Fault Diagnosis Method of Battery System Based on Shannon Entropy
Sun, Z., Liu, P., & Wang, Z. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.676 · Cited by 48
On-board Thermal Fault Diagnosis of Lithium-ion Batteries For Hybrid Electric Vehicle Application
Dey, S., Biron, Z. A., Tatipamula, S., Das, N., Mohon, S., Ayalew, B., & Pisu, P. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.10.056 · Cited by 40
Self-citationFault mechanism study on Li‐ion battery at over‐discharge and its diagnosis approach
Wu, C., Chunbo, Z., Jinlei, S., & Jianhu, J. (2016) · IET Electrical Systems in Transportation · doi:10.1049/iet-est.2016.0024 · Cited by 38
Sensors fault diagnosis for a BMS
Lombardi, W., Zarudniev, M., Lesecq, S., & Bacquet, S. (2014) · European Control Conference (ECC) · doi:10.1109/ecc.2014.6862432 · Cited by 34
Online Diagnosis for the Capacity Fade Fault of a Parallel-Connected Lithium Ion Battery Group
Zhang, H., Pei, L., Sun, J., Song, K., Lu, R., Zhao, Y.-P., Zhu, C., & Wang, T. (2016) · Energies · doi:10.3390/en9050387 · Cited by 32
Estimating state-of-charge imbalance of batteries using force measurements
Kim, Y., Samad, N. A., Oh, K., Siegel, J. B., Epureanu, B. I., & Stefanopoulou, A. G. (2016) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2016.7525128 · Cited by 31
Structural Analysis Based Fault Detection and Isolation Applied for A Lithium-Ion Battery Pack
Liu, Z., He, H., Ahmed, Q., & Rizzoni, G. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.09.731 · Cited by 27
Alavi, S. M. M., Samadi, M. F., & Saif, M. (2013) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2013.6580510 · Cited by 22
Diagnostics in Lithium-Ion Batteries: Challenging Issues and Recent Achievements
Alavi, S. M. M., Samadi, M. F., & Saif, M. (2012) · Springer eBooks · doi:10.1007/978-3-642-34471-8_22 · Cited by 21
THEORY AND APPLICATIONS OF FAULT TOLERANT CONTROL
Dong-hua, Z., & Ding, X. (2000) · Cited by 19
Kim, T., Adhikaree, A., Pandey, R., Kang, D.-W., Kim, M., Oh, C.-Y., & Back, J. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341586 · Cited by 19
A Greedy Approach for Selection of Residual Generators
Svärd, C., Nyberg, M., & Frisk, E. (2011) · Cited by 17
Zhou, X. S., Ersal, T., Stein, J. L., & Bernstein, D. S. (2014) · doi:10.1115/dscc2014-6254 · Cited by 9
Fault Detection and Isolation using an Adaptive Unscented Kalman Filter
Das, M., Sadhu, S., & Ghoshal, T. K. (2014) · IFAC Proceedings Volumes · doi:10.3182/20140313-3-in-3024.00075 · Cited by 9
Cited by
A Review on Electric Vehicles: Technologies and Challenges
Sanguesa, J. A., Torres-Sanz, V., Garrido, P., Martinez, F. J., & Marquez-Barja, J. M. (2021) · Smart Cities · doi:10.3390/smartcities4010022 · Cited by 1,367
Overview of batteries and battery management for electric vehicles
Liu, W., Placke, T., & Chau, K. T. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.016 · Cited by 715
Health prognostics for lithium-ion batteries: mechanisms, methods, and prospects
Che, Y., Hu, X., Lin, X., Guo, J., & Teodorescu, R. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03019e · Cited by 413
Self-citationMitigation strategies for Li-ion battery thermal runaway: A review
Xu, B., Lee, J., Kwon, D., Kong, L., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111437 · Cited by 377
Zhang, G., Wei, X., Tang, X., Zhu, J., Chen, S., & Dai, H. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110790 · Cited by 308
Metadata
- Authors
- Hu, X., Zhang, K., Liu, K., Lin, X., Dey, S., & Onori, S.
- Venue
- IEEE Industrial Electronics Magazine
- Published
- 2020-09
- Volume
- 14
- Issue
- 3
- Pages
- 65-91
- ISSN
- 1932-4529 (ISSN-L)
- 1941-0115
- OpenAlex
- W3088523737
- Cited by
- 580
- References
- 151
- FWCI
- 24.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.