The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Self-Accelerated Thermal Dissolution Model for Reset Programming in Unipolar Resistive-Switching Memory (RRAM) Devices
Abstract
This paper addresses the numerical modeling of reset programming in NiO-based resistive-switching memory. In our model, we simulate electrical conduction and heating in the conductive filament (CF), which controls the resistance of the low resistive (or set) state, accounting for CF thermal-activated dissolution. Employing CF electrical and thermal parameters, which were previously characterized on our NiO-based samples, our calculations are shown to match experimental reset and retention characteristics. Simulations show that reset transition is self-accelerated as a consequence of a positive feedback between the thermal dissolution of the CF and local Joule heating in the CF bottleneck, which can account for the abrupt resistance transition in experimental data. Finally, the model is used to investigate the reduction of the reset current, which is needed for device application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition
Choi, B. J., Jeong, D. S., Kim, S. K., Rohde, C., Choi, S., Oh, J. H., Kim, H. J., Hwang, C. S., Szot, K., Waser, R., et al. (2005) · Journal of Applied Physics · doi:10.1063/1.2001146 · Cited by 1,150
Baek, I. G., Lee, M. S., Sco, S., Lee, M. J., Seo, D. H., Suh, D.-S., Park, J. C., Park, S. O., Kim, H. S., Yoo, I. K., et al. (2005) · IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004. · doi:10.1109/iedm.2004.1419228 · Cited by 530
Electrical observations of filamentary conductions for the resistive memory switching in NiO films
Kim, D. C., Seo, S., Ahn, S. E., Suh, D.-S., Lee, M. J., Park, B.-H., Yoo, I. K., Baek, I. G., Kim, H.-J., Yim, E. K., et al. (2006) · Applied Physics Letters · doi:10.1063/1.2204649 · Cited by 526
Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010583 · Cited by 361
Self-citationThermal conductivity of sputtered oxide films
Lee, S.-M., Cahill, D. G., & Allen, T. H. (1995) · Physical Review B · doi:10.1103/physrevb.52.253 · Cited by 280
Lee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Multi-layer cross-point binary oxide resistive memory (OxRRAM) for post-NAND storage application
Baek, I. G., Kim, D. C., Lee, M. J., Kim, H.-J., Yim, E. K., Lee, M. S., Lee, J. E., Ahn, S. E., Seo, S., Lee, J. H., et al. (2006) · IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest. · doi:10.1109/iedm.2005.1609462 · Cited by 218
A Low-Power Nonvolatile Switching Element Based on Copper-Tungsten Oxide Solid Electrolyte
Kozicki, M. N., Gopalan, C., Balakrishnan, M., & Mitkova, M. (2006) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2006.880407 · Cited by 216
Kinoshita, K., Tamura, T., Aoki, M., Sugiyama, Y., & Tanaka, H. (2006) · Applied Physics Letters · doi:10.1063/1.2339032 · Cited by 215
Localized switching mechanism in resistive switching of atomic-layer-deposited TiO2 thin films
Kim, K. M., Choi, B. J., & Hwang, C. S. (2007) · Applied Physics Letters · doi:10.1063/1.2748312 · Cited by 213
Cited by
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Emerging memories: resistive switching mechanisms and current status
Jeong, D. S., Thomas, R., Katiyar, R. S., Scott, J. F., Kohlstedt, H., Petraru, A., & Hwang, C. S. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/7/076502 · Cited by 1,106
Zahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationA comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Recommended Methods to Study Resistive Switching Devices
Lanza, M., Wong, H. ‐. P., Pop, E., Ielmini, D., Strukov, D., Regan, B. C., Larcher, L., Villena, M. A., Yang, J. J., Goux, L., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800143 · Cited by 674
Self-citationKim, K. M., Jeong, D. S., & Hwang, C. S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254002 · Cited by 631
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010583 · Cited by 361
Self-citationGuan, X., Yu, S., & Wong, H.-S. P. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2184545 · Cited by 355
Origin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches
Menzel, S., Waters, M., Marchewka, A., Böttger, U., Dittmann, R., & Waser, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101117 · Cited by 348
Adaptive oxide electronics: A review
Ha, S. D., & Ramanathan, S. (2011) · Journal of Applied Physics · doi:10.1063/1.3640806 · Cited by 307
Yu, S., Wu, Y., & Wong, H.-S. P. (2011) · Applied Physics Letters · doi:10.1063/1.3564883 · Cited by 288
Banerjee, W., Kashir, A., & Kamba, S. (2022) · Small · doi:10.1002/smll.202107575 · Cited by 277
Characterization of HfO 2 -based devices with indication of second order memristor effects
Rodriguez-Fernandez, A., Cagli, C., Perniola, L., Miranda, E., & Suñé, J. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.04.006 · Cited by 22
Self-citation
Metadata
- Authors
- Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2009-02
- Volume
- 56
- Issue
- 2
- Pages
- 193-200
- ISSN
- 0018-9383 (ISSN-L)
- OpenAlex
- W2114108612
- Cited by
- 389
- References
- 18
- FWCI
- 25.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.