The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Resistive Switching by Voltage-Driven Ion Migration in Bipolar RRAM—Part II: Modeling
Abstract
Resistive-switching memory (RRAM) based on transition metal oxides is a potential candidate for replacing Flash and dynamic random access memory in future generation nodes. Although very promising from the standpoints of scalability and technology, RRAM still has severe drawbacks in terms of understanding and modeling of the resistive-switching mechanism. This paper addresses the modeling of resistive switching in bipolar metal-oxide RRAMs. Reset and set processes are described in terms of voltage-driven ion migration within a conductive filament generated by electroforming. Ion migration is modeled by drift–diffusion equations with Arrhenius-activated diffusivity and mobility. The local temperature and field are derived from the self-consistent solution of carrier and heat conduction equations in a 3-D axis-symmetric geometry. The model accounts for set–reset characteristics, correctly describing the abrupt set and gradual reset transitions and allowing scaling projections for metal-oxide RRAM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Physics and technology of semiconductor devices
Grove, A. S. (1967) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,802
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Switching the electrical resistance of individual dislocations in single-crystalline SrTiO3
Szot, K., Speier, W., Bihlmayer, G., & Waser, R. (2006) · Nature Materials · doi:10.1038/nmat1614 · Cited by 1,651
Ielmini, D. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2167513 · Cited by 551
Self-citationBaek, I. G., Lee, M. S., Sco, S., Lee, M. J., Seo, D. H., Suh, D.-S., Park, J. C., Park, S. O., Kim, H. S., Yoo, I. K., et al. (2005) · IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004. · doi:10.1109/iedm.2004.1419228 · Cited by 530
Role of Oxygen Vacancies in Cr‐Doped SrTiO3 for Resistance‐Change Memory
Janousch, M., Meijer, G. I., Staub, U., Delley, B., Karg, S. F., & Andreasson, B. P. (2007) · Advanced Materials · doi:10.1002/adma.200602915 · Cited by 530
Metal oxide resistive memory switching mechanism based on conductive filament properties
Bersuker, G., Gilmer, D. C., Veksler, D., Kirsch, P., Vandelli, L., Padovani, A., Larcher, L., McKenna, K., Shluger, A., Iglesias, V., et al. (2011) · Journal of Applied Physics · doi:10.1063/1.3671565 · Cited by 486
Self-citationOrigin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches
Menzel, S., Waters, M., Marchewka, A., Böttger, U., Dittmann, R., & Waser, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101117 · Cited by 348
Direct Identification of the Conducting Channels in a Functioning Memristive Device
Strachan, J. P., Pickett, M. D., Yang, J. J., Aloni, S., David Kilcoyne, A. L., Medeiros‐Ribeiro, G., & Stanley Williams, R. (2010) · Advanced Materials · doi:10.1002/adma.201000186 · Cited by 329
Study of Multilevel Programming in Programmable Metallization Cell (PMC) Memory
Russo, U., Kamalanathan, D., Ielmini, D., Lacaita, A. L., & Kozicki, M. N. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2016019 · Cited by 319
Self-citationCoupled Ionic and Electronic Transport Model of Thin‐Film Semiconductor Memristive Behavior
Strukov, D. B., Borghetti, J. L., & Williams, R. S. (2009) · Small · doi:10.1002/smll.200801323 · Cited by 270
Walczyk, C., Walczyk, D., Schroeder, T., Bertaud, T., Sowinska, M., Lukosius, M., Fraschke, M., Wolansky, D., Tillack, B., Miranda, E., et al. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2160265 · Cited by 246
Compact Modeling of Conducting-Bridge Random-Access Memory (CBRAM)
Yu, S., & Wong, H.-S. P. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2116120 · Cited by 239
Ielmini, D., Nardi, F., & Cagli, C. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254022 · Cited by 230
Self-citationResistive Switching by Voltage-Driven Ion Migration in Bipolar RRAM—Part I: Experimental Study
Nardi, F., Larentis, S., Balatti, S., Gilmer, D. C., & Ielmini, D. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2202319 · Cited by 211
Self-citationYu, S., Guan, X., & Wong, H.-S. P. (2011) · 2011 International Electron Devices Meeting · doi:10.1109/iedm.2011.6131572 · Cited by 204
Thermochemical resistive switching: materials, mechanisms, and scaling projections
Ielmini, D., Bruchhaus, R., & Waser, R. (2011) · Phase Transitions · doi:10.1080/01411594.2011.561478 · Cited by 192
Self-citationThermal Properties of Ultrathin Hafnium Oxide Gate Dielectric Films
Panzer, M. A., Shandalov, M., Rowlette, J. A., Oshima, Y., Chen, Y. W., McIntyre, P. C., & Goodson, K. E. (2009) · IEEE Electron Device Letters · doi:10.1109/led.2009.2032937 · Cited by 184
Universal Reset Characteristics of Unipolar and Bipolar Metal-Oxide RRAM
Ielmini, D., Nardi, F., & Cagli, C. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2161088 · Cited by 133
Self-citationPark, S.-G., Magyari‐Köpe, B., & Nishi, Y. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2091489 · Cited by 129
Size-Dependent Retention Time in NiO-Based Resistive-Switching Memories
Ielmini, D., Nardi, F., Cagli, C., & Lacaita, A. L. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2040799 · Cited by 122
Self-citationModeling of Set/Reset Operations in NiO-Based Resistive-Switching Memory Devices
Cagli, C., Nardi, F., & Ielmini, D. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2024046 · Cited by 120
Self-citationModel of metallic filament formation and rupture in NiO for unipolar switching
Lee, H. D., Magyari‐Köpe, B., & Nishi, Y. (2010) · Physical Review B · doi:10.1103/physrevb.81.193202 · Cited by 113
Oxide dual-layer memory element for scalable non-volatile cross-point memory technology
Meyer, R., Schloss, L. F., Brewer, J., Lambertson, R., Kinney, W., Sanchez, J., & Rinerson, D. (2008) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmt.2008.4731194 · Cited by 108
Random and localized resistive switching observation in Pt/NiO/Pt
Yun, J., Kim, S., Seo, S., Lee, M., Kim, D., Ahn, S., Park, Y., Jiyoung, K., & Shin, H. (2007) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.200701205 · Cited by 88
Effects of RRAM Stack Configuration on Forming Voltage and Current Overshoot
Gilmer, D. C., Bersuker, G. I., Park, H.-Y., Park, C., Butcher, B., Wang, W., Kirsch, P. D., & Jammy, R. (2011) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw.2011.5873225 · Cited by 81
Self-citationScaling analysis of submicrometer nickel-oxide-based resistive switching memory devices
Ielmini, D., Spiga, S., Nardi, F., Cagli, C., Lamperti, A., Cianci, E., & Fanciulli, M. (2011) · Journal of Applied Physics · doi:10.1063/1.3544499 · Cited by 80
Self-citationComplementary switching in metal oxides: Toward diode-less crossbar RRAMs
Nardi, F., Balatti, S., Larentis, S., et al. (2011) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2011.6131647 · Cited by 75
Self-citationFilamentary-switching model in RRAM for time, energy and scaling projections
Ielmini, D. (2011) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2011.6131571 · Cited by 57
Self-citationInvestigation of State Stability of Low-Resistance State in Resistive Memory
Park, J., Jo, M., Bourim, E. M., Yoon, J., Seong, D.-J., Lee, J., Lee, W., & Hwang, H. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2042677 · Cited by 57
Cited by
In-memory computing with resistive switching devices
Ielmini, D., & Wong, H.-S. P. (2018) · Nature Electronics · doi:10.1038/s41928-018-0092-2 · Cited by 2,298
“Pulse accumulation in nanoscale elements has been demonstrated in RRAM devices, where repeated pulses cause incremental reset transitions because of the gradual increase of the depleted gap disconnecting the conductive path 66 .”
BackgroundSelf-citationZahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationConduction Mechanism of Valence Change Resistive Switching Memory: A Survey
Lim, E., & Ismail, R. (2015) · Electronics · doi:10.3390/electronics4030586 · Cited by 829
A comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Metadata
- Authors
- Larentis, S., Nardi, F., Balatti, S., Gilmer, D. C., & Ielmini, D.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2012-09
- Volume
- 59
- Issue
- 9
- Pages
- 2468-2475
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2051133151
- Cited by
- 495
- References
- 33
- FWCI
- 22.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.