An Intelligent Fault Diagnosis Method Using Unsupervised Feature Learning Towards Mechanical Big Data
The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Abstract
Intelligent fault diagnosis is a promising tool to deal with mechanical big data due to its ability in rapidly and efficiently processing collected signals and providing accurate diagnosis results. In traditional intelligent diagnosis methods, however, the features are manually extracted depending on prior knowledge and diagnostic expertise. Such processes take advantage of human ingenuity but are time-consuming and labor-intensive. Inspired by the idea of unsupervised feature learning that uses artificial intelligence techniques to learn features from raw data, a two-stage learning method is proposed for intelligent diagnosis of machines. In the first learning stage of the method, sparse filtering, an unsupervised two-layer neural network, is used to directly learn features from mechanical vibration signals. In the second stage, softmax regression is employed to classify the health conditions based on the learned features. The proposed method is validated by a motor bearing dataset and a locomotive bearing dataset, respectively. The results show that the proposed method obtains fairly high diagnosis accuracies and is superior to the existing methods for the motor bearing dataset. Because of learning features adaptively, the proposed method reduces the need of human labor and makes intelligent fault diagnosis handle big data more easily.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Reducing the dimensionality of data with neural networks
Hinton, G. E., & Salakhutdinov, R. R. (2006) · Science · doi:10.1126/science.1127647 · Cited by 20,928
Representation Learning: A Review and New Perspectives
Bengio, Y., Courville, A., & Vincent, P. (2013) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2013.50 · Cited by 13,001 · cited 1×
“This would make intelligent fault diagnosis methods less dependent on the prior knowledge or human labor, so that novel applications could be done faster, and more importantly, to make mechanical fault diagnosis toward real artificial intelligence [20].”
BackgroundHinton, G., Deng, L., Yu, D., Dahl, G., Mohamed, A.-R., Jaitly, N., Senior, A., Vanhoucke, V., Nguyen, P., Sainath, T., et al. (2012) · IEEE Signal Processing Magazine · doi:10.1109/msp.2012.2205597 · Cited by 10,260 · cited 1×
“tion [24], speech recognition [25], and high-energy physic [26], and state-of-the-art performances are obtained in these fields.”
BackgroundIndependent component analysis: algorithms and applications
Hyvärinen, A., & Oja, E. (2000) · Neural Networks · doi:10.1016/s0893-6080(00)00026-5 · Cited by 8,705 · cited 1×
“other and speed up the convergence of the sparse filtering training [37].”
BackgroundAn analysis of single-layer networks in unsupervised feature learning
Coates, A., Ng, A. Y., & Lee, H. (2011) · International Conference on Artificial Intelligence and Statistics · Cited by 4,675
Compressive Sensing [Lecture Notes]
Baraniuk, R. (2007) · IEEE Signal Processing Magazine · doi:10.1109/msp.2007.4286571 · Cited by 4,177
A Practical Guide to Training Restricted Boltzmann Machines
Hinton, G. E. (2012) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-35289-8_32 · Cited by 2,852 · cited 1×
“Once these parameters are set inappropriately, the learned features may result in poor diagnosis accuracy [28].”
BackgroundWu, X., Zhu, X., Wu, G.-Q., & Ding, W. (2014) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2013.109 · Cited by 2,410 · cited 1×
“2519325 new perspectives and challenges in processing and discovering valuable information [4], but also may prompt its power to affect other fields, such as the field of condition monitoring”
BackgroundBeyond Accuracy, F-Score and ROC: A Family of Discriminant Measures for Performance Evaluation
Sokolova, M., Japkowicz, N., & Szpakowicz, S. (2006) · Lecture Notes in Computer Science · doi:10.1007/11941439_114 · Cited by 1,974 · cited 1×
“To compare their performances with that of the proposed method, F-score is adopted [40], which is a commonly used criterion measuring the performance of a classification method.”
Method
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Self-citationA new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
“They are sparse filter [16], DBN) [12], DBN-based HDN [27], SVM [43], ANN [12], and adaptive deep convolution neural network (ADCNN) [30].”
MethodArtificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Zhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
“Therefore, some studies proposed that the classifier should have the ability to classify the data from the raw signal directly, without feature extraction or manual selection [24,27].”
BackgroundDeep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning
Shao, S., McAleer, S., Yan, R., & Baldi, P. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2864759 · Cited by 1,635
Guo, L., Lei, Y., Xing, S., Yan, T., & Li, N. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877090 · Cited by 1,234
“As a matter of fact, it is demonstrated in [8]–[10] that the success of intelligent fault diagnosis of machines relies on those two conditions.”
BackgroundSelf-citationA New Deep Transfer Learning Based on Sparse Auto-Encoder for Fault Diagnosis
Wen, L., Gao, L., & Li, X. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2754287 · Cited by 1,095
“[22] studied an unsupervised two-layer neural network based on the sparse filtering method and applied it on the fault diagnosis.”
MethodDeep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
“Besides the commonly used ML methods listed above, many other algorithms have been applied to the identification of bearing faults, bringing in different characteristics and benefits, including neural fuzzy network [62]–[64], Bayesian networks [65]–[67], self-organizing maps [68], [69], extreme learning machines (ELM)…”
MethodMultiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892
“In the output layer, we use a softmax function [17] that outputs a conditional probability for each class.”
BackgroundMethodMachine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks
Zhao, R., Wang, D., Yan, R., Mao, K., Shen, F., & Wang, J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733438 · Cited by 877
“Meanwhile, it motivates the research of datadriven machine health monitoring systems (MHMS) that are capable to detect faults and predict working conditions [2]–[4].”
BackgroundYang, B., Lei, Y., Jia, F., & Xing, S. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.12.051 · Cited by 879
Self-citationZio, E. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108119 · Cited by 714
A transfer convolutional neural network for fault diagnosis based on ResNet-50
Wen, L., Li, X., & Gao, L. (2020) · Neural Computing and Applications · doi:10.1007/s00521-019-04097-w · Cited by 764
“They are normalized SAE (NSAE-LCN) from Jia et al. [23], stacked sparse autoencoder (SSAE) from Qi et al. [24], sparse filter from Lei et al. [48], deep belief network (DBN) form Gan et al. [25], deep CNN from Wang et al. [30], adaptive deep convolution neural network (ADCNN) from Guo et al. [31],…”
BackgroundData-Driven Methods for Predictive Maintenance of Industrial Equipment: A Survey
Zhang, W., Yang, D., & Wang, H. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2905565 · Cited by 732
“posed in [94] to construct a fault diagnosis framework.”
BackgroundJing, L., Zhao, M., Li, P., & Xu, X. (2017) · Measurement · doi:10.1016/j.measurement.2017.07.017 · Cited by 698
A novel deep autoencoder feature learning method for rotating machinery fault diagnosis
Shao, H., Jiang, H., Zhao, H., & Wang, F. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.03.034 · Cited by 684
Big data analytics for intelligent manufacturing systems: A review
Wang, J., Xu, C., Zhang, J., & Zhong, R. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.03.005 · Cited by 603
Han, T., Liu, C., Yang, W., & Jiang, D. (2020) · ISA Transactions · doi:10.1016/j.isatra.2019.08.012 · Cited by 578
“Besides, the designed features always aim at special application object, and thus have limited adaptability when facing new diagnosis issues or changing the physical characteristics of the original systems [9].”
BackgroundA comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Self-citationJia, F., Lei, Y., Lu, N., & Xing, S. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.03.025 · Cited by 587
Self-citationRen, S., Zhang, Y., Liu, Y., Sakao, T., Huisingh, D., & Almeida, C. M. V. B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.025 · Cited by 525
A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 509
Jia, F., Lei, Y., Guo, L., Lin, J., & Xing, S. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.07.032 · Cited by 517
Self-citationElectric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
Multi-Layer domain adaptation method for rolling bearing fault diagnosis
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2018.12.005 · Cited by 477
“A softmax regression is usually implemented on the top layer in a neural network for multi-class classification [48].”
MethodA novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders
Shao, H., Jiang, H., Lin, Y., & Li, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.09.026 · Cited by 460
Huang, T., Zhang, Q., Tang, X., Zhao, S., & Lu, X. (2022) · Artificial Intelligence Review · doi:10.1007/s10462-021-09993-z · Cited by 400
Intelligent Bearing Fault Diagnosis Method Combining Compressed Data Acquisition and Deep Learning
Sun, J., Yan, C., & Wen, J. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2759418 · Cited by 422
“on the acquisition hardware, data storage, transmission bandwidth, and on the subsequent processing [20], but also drives the mechanical health monitoring toward the big data era [21].”
BackgroundIntelligent rotating machinery fault diagnosis based on deep learning using data augmentation
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1456-1 · Cited by 404
Deep residual learning-based fault diagnosis method for rotating machinery
Zhang, W., Li, X., & Ding, Q. (2019) · ISA Transactions · doi:10.1016/j.isatra.2018.12.025 · Cited by 416
Mechanical fault diagnosis using Convolutional Neural Networks and Extreme Learning Machine
Chen, Z., Gryllias, K., & Li, W. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106272 · Cited by 390
Cross-Domain Fault Diagnosis of Rolling Element Bearings Using Deep Generative Neural Networks
Li, X., Zhang, W., & Ding, Q. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868023 · Cited by 396
“The softmax classifier, which has been popularly used in most classification tasks, is adopted in this study [10].”
MethodLi, X., Zhang, W., & Ding, Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2019.03.019 · Cited by 383
Jalayer, M., Orsenigo, C., & Vercellis, C. (2021) · Computers in Industry · doi:10.1016/j.compind.2020.103378 · Cited by 382
Wang, Z., Wang, J., & Wang, Y. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.024 · Cited by 388
Zhao, M., Kang, M., Tang, B., & Pecht, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2762639 · Cited by 380
Shao, H., Jiang, H., Zhang, H., Duan, W., Liang, T., & Wu, S. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.08.002 · Cited by 380
Jing, L., Wang, T., Zhao, M., & Wang, P. (2017) · Sensors · doi:10.3390/s17020414 · Cited by 379
Machinery fault diagnosis with imbalanced data using deep generative adversarial networks
Zhang, W., Li, X., Jia, X.-D., Ma, H., Luo, Z., & Li, X. (2020) · Measurement · doi:10.1016/j.measurement.2019.107377 · Cited by 364
Tackling Faults in the Industry 4.0 Era—A Survey of Machine-Learning Solutions and Key Aspects
Angelopoulos, A., Michailidis, E. T., Nomikos, N., Trakadas, P., Hatziefremidis, A., Voliotis, S., & Zahariadis, T. (2019) · Sensors · doi:10.3390/s20010109 · Cited by 365
“The authors of Reference [49] aimed to alleviate the burden of manual fault information extraction, relying on previous knowledge and diagnostic skills, by developing an intelligent fault detection scheme.”
BackgroundA New Intelligent Bearing Fault Diagnosis Method Using SDP Representation and SE-CNN
Wang, H., Xu, J., Yan, R., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2956332 · Cited by 353
“Although these types of traditional fault diagnosis methods have achieved certain progress, they need usually some expert knowledge and show poor generalization performance [6].”
BackgroundBrito, L. C., Susto, G. A., Brito, J. N., & Duarte, M. A. V. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108105 · Cited by 343
Dai, H.-N., Wang, H., Xu, G., Wan, J., & Imran, M. (2020) · Enterprise Information Systems · doi:10.1080/17517575.2019.1633689 · Cited by 248
Xiao, Y., Shao, H., Han, S., Huo, Z., & Wan, J. (2022) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2022.3177174 · Cited by 334
“Therefore, research studies on unsupervised cross-domain fault diagnosis of bearings have more practical significance [22], [23].”
BackgroundDeep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2019.2963092 · Cited by 323
“On the other hand, with regard to model training, the shallow model is used to characterize the complex mapping relationship between signals and health status, which leads to the obvious deficiency in diagnostic ability and generalization performance of the model in the face of mechanical big data [31], [32].”
MethodA new bearing fault diagnosis method based on modified convolutional neural networks
ZHANG, J., SUN, Y., GUO, L., GAO, H., HONG, X., & SONG, H. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2019.07.011 · Cited by 326
Haidong, S., Hongkai, J., Xingqiu, L., & Shuaipeng, W. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2017.10.024 · Cited by 321
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
“guage processing [20], image processing [21], robotics [22], FDD systems [23] and medical applications [24].”
BackgroundEarly Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2807414 · Cited by 307
“Due to these two issues, manually extracting a set of sensitive features is extremely difficult and time-consuming [21], thus it is”
BackgroundAn unsupervised fault diagnosis method for rolling bearing using STFT and generative neural networks
Tao, H., Wang, P., Chen, Y., Stojanovic, V., & Yang, H. (2020) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2020.04.024 · Cited by 315
A physics-informed deep learning approach for bearing fault detection
Shen, S., Lu, H., Sadoughi, M., Hu, C., Nemani, V., Thelen, A., Webster, K., Darr, M., Sidon, J., & Kenny, S. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104295 · Cited by 293
“Sub-band Order range [6.41,7.09] [12 .83,14 Each vector of input features (i.e., the sub-band envelope spectrum) has a corresponding health class that serves as the ground truth of a bearing ’s health class .”
BackgroundInfluentialDeep Coupling Autoencoder for Fault Diagnosis With Multimodal Sensory Data
Ma, M., Sun, C., & Chen, X. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2793246 · Cited by 304
“[21] proposed a two-stage learning method for intelligent diagnosis of machines.”
MethodFederated learning for machinery fault diagnosis with dynamic validation and self-supervision
Zhang, W., Li, X., Ma, H., Luo, Z., & Li, X. (2021) · Knowledge-Based Systems · doi:10.1016/j.knosys.2020.106679 · Cited by 301
Diagnosing Rotating Machines With Weakly Supervised Data Using Deep Transfer Learning
Li, X., Zhang, W., Ding, Q., & Li, X. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2927590 · Cited by 298
“In [9] and [10], deep neural networks”
Pan, J., Zi, Y., Chen, J., Zhou, Z., & Wang, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2767540 · Cited by 294
“[19] developed a two-stage artificial intelligent method and verified its effectiveness on motor bearing datasets.”
MethodConvolutional Discriminative Feature Learning for Induction Motor Fault Diagnosis
Sun, W., Zhao, R., Yan, R., Shao, S., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2672988 · Cited by 295
“…deep neural network (DNN) [34] has been studied for induction motor faults classi-fication recently and the unsupervised feature learning method as sparse filtering has also been utilized in [35] to directly learn fault features that are then used for classification through soft-max regression.”
Method(2019) · NORA - Norwegian Open Research Archives · Cited by 291
Shao, H., Jiang, H., Wang, F., & Wang, Y. (2017) · ISA Transactions · doi:10.1016/j.isatra.2017.03.017 · Cited by 288
Yang, B., Lei, Y., Jia, F., Li, N., & Du, Z. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2953010 · Cited by 282
“W ITH the rapid development of deep learning, intelligent fault diagnosis (IFD) has got a number of achievements in recent years [1]–[3].”
BackgroundSelf-citationGuo, L., Lei, Y., Li, N., Yan, T., & Li, N. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.02.083 · Cited by 270
Self-citationJiang, G., He, H., Xie, P., & Tang, Y. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2698738 · Cited by 271
“Recent studies in the fault diagnosis field have shown that the deep learning-based representation learning approaches produce state-of-the-art performance over traditional handcrafted feature extraction approaches [20]–[24].”
BackgroundLi, X., Zhang, W., & Ding, Q. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.021 · Cited by 271
A hybrid classification autoencoder for semi-supervised fault diagnosis in rotating machinery
Wu, X., Zhang, Y., Cheng, C., & Peng, Z. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107327 · Cited by 266
Dong, Y., Li, Y., Zheng, H., Wang, R., & Xu, M. (2022) · ISA Transactions · doi:10.1016/j.isatra.2021.03.042 · Cited by 264
Qiu, S., Cui, X., Ping, Z., Shan, N., Li, Z., Bao, X., & Xu, X. (2023) · Sensors · doi:10.3390/s23031305 · Cited by 221
“At present in the era of Industry 4.0 [12], the emerging of Big Data [1,13], Internet of Things (IoT) [14,15], and artificial intelligence (AI) technology [16,17] are now promoting the transformation of PHM (specifically FDP in this paper) from traditional single-sensor-oriented diagnosis to…”
BackgroundInfluentialApplications of artificial intelligence in engineering and manufacturing: a systematic review
Nti, I. K., Adekoya, A. F., Weyori, B. A., & Nyarko-Boateng, O. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01771-6 · Cited by 234
“…measuring the performance of ML models (96–100)%, example (Borges Hink et al., 2014; Fuge et al., 2014; Kateris et al., 2014; Kroll et al., 2014; Lei et al., 2016; Li, Zhang, et al., 2019; Li, Zou, et al., 2019; Park et al., 2016; Syafrudin et al., 2018; Zhang et al., 2017) and 14% within…”
BackgroundMethodInfluentialChen, R., Huang, X., Yang, L., Xu, X., Zhang, X., & Zhang, Y. (2019) · Computers in Industry · doi:10.1016/j.compind.2018.11.003 · Cited by 249
Chen, L., Li, Q., Shen, C., Zhu, J., Wang, D., & Xia, M. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3078712 · Cited by 242
“Given the inevitable faults of mechanical devices, health management has been studied for economic benefit and personnel security [2].”
BackgroundArtificial Intelligence-Based Technique for Fault Detection and Diagnosis of EV Motors: A Review
Lang, W., Hu, Y., Gong, C., Zhang, X., Xu, H., & Deng, J. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3110318 · Cited by 220
“The SoftMax function has the following equation : Signal processing techniques with different characteristics are combined with CNN for fault signal diagnosis [74], [75].”
An, Z., Li, S., Wang, J., & Jiang, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2019.11.010 · Cited by 224
Qiao, M., Yan, S., Tang, X., & Xu, C. (2020) · IEEE Access · doi:10.1109/access.2020.2985617 · Cited by 219
“In [17], an unsupervised learning method based on sparse filtering and softmax was proposed to solve the problem of fault diagnosis against the background of big data.”
MethodLeng, J., Zhu, X., Huang, Z., Li, X., Zheng, P., Zhou, X., Mourtzis, D., Wang, B., Qi, Q., Shao, H., et al. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.02.010 · Cited by 205
Residual joint adaptation adversarial network for intelligent transfer fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106962 · Cited by 225
Self-citationZhang, Y., Li, X., Gao, L., Wang, L., & Wen, L. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.005 · Cited by 226
A global manufacturing big data ecosystem for fault detection in predictive maintenance
Yu, W., Dillon, T., Mostafa, F., Rahayu, W., & Liu, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915846 · Cited by 225
LI, Y., DU, X., WAN, F., WANG, X., & YU, H. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2019.08.014 · Cited by 214
Intelligent Fault Diagnosis of the High-Speed Train With Big Data Based on Deep Neural Networks
Hu, H., Tang, B., Gong, X., Wei, W., & Wang, H. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2683528 · Cited by 222
Deep Decoupling Convolutional Neural Network for Intelligent Compound Fault Diagnosis
Huang, R., Liao, Y., Zhang, S., & Li, W. (2019) · IEEE Access · doi:10.1109/access.2018.2886343 · Cited by 211
Review on Machine Learning Algorithm Based Fault Detection in Induction Motors
Kumar, P., & Hati, A. S. (2021) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-020-09446-w · Cited by 200
“In recent times, deep learning have also been explored by researchers for fault detection [49].”
BackgroundAn enhancement denoising autoencoder for rolling bearing fault diagnosis
Meng, Z., Zhan, X., Li, J., & Pan, Z. (2018) · Measurement · doi:10.1016/j.measurement.2018.08.010 · Cited by 214
Li, J., Yao, X., Wang, X., Yu, Q., & Zhang, Y. (2020) · Measurement · doi:10.1016/j.measurement.2019.107419 · Cited by 211
Li, X., Zhang, W., Xu, N.-X., & Ding, Q. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2935987 · Cited by 211
“Machinery fault diagnosis has also largely benefited from the rapid development of deep learning in the past years and so far, the basic data-driven fault diagnostic tasks have been well addressed where the training and testing data are subject to the same distribution [2], [3], indicating the vibration data are colle…”
BackgroundA Novel Weighted Adversarial Transfer Network for Partial Domain Fault Diagnosis of Machinery
Li, W., Chen, Z., & He, G. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2994621 · Cited by 209
“They have been found to be promising tools for handling mechanical big data analysis in industry [7], [8].”
MethodInitial center frequency-guided VMD for fault diagnosis of rotating machines
Jiang, X., Shen, C., Shi, J., & Zhu, Z. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.07.039 · Cited by 203
A Survey on Data-Driven Predictive Maintenance for the Railway Industry
Davari, N., Veloso, B., Costa, G. D. A., Pereira, P. M., Ribeiro, R. P., & da Gama, J. M. P. (2021) · Sensors · doi:10.3390/s21175739 · Cited by 237
Application of recurrent neural network to mechanical fault diagnosis: A review
Zhu, J., Jiang, Q., Shen, Y., Qian, C., Xu, F., & Zhu, Q. (2022) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-022-0102-1 · Cited by 200
“It is challenging for the adoption of multisource coupling, nonlinear, non-stationary and other characteristics of this complex mechanical equipment and realizing the early weak fault state assessment and diagnosis in the profession of rotating machinery fault diagnosis [4].”
BackgroundDomain generalization in rotating machinery fault diagnostics using deep neural networks
Li, X., Zhang, W., Ma, H., Luo, Z., & Li, X. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.05.014 · Cited by 192
A GAN-Based Anomaly Detection Approach for Imbalanced Industrial Time Series
Jiang, W., Hong, Y., Zhou, B., He, X., & Cheng, C. (2019) · IEEE Access · doi:10.1109/access.2019.2944689 · Cited by 186
“As a powerful pattern recognition tool for anomaly detection, machine learning algorithms have become the focus of attention [1], including Bayesian classifier [8], support vector machine (SVM) [9], [10], neural networks [10], [11], and deep learning methods [12].”
MethodSounds and acoustic emission-based early fault diagnosis of induction motor: A review study
AlShorman, O., Alkahatni, F., Masadeh, M., Irfan, M., Glowacz, A., Althobiani, F., Kozik, J., & Glowacz, W. (2021) · Advances in Mechanical Engineering · doi:10.1177/1687814021996915 · Cited by 186
A literature review of fault diagnosis based on ensemble learning
Mian, Z., Deng, X., Dong, X., Tian, Y., Cao, T., Chen, K., & Jaber, T. A. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107357 · Cited by 174
SuperGraph: Spatial-Temporal Graph-Based Feature Extraction for Rotating Machinery Diagnosis
Yang, C., Zhou, K., & Liu, J. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3075871 · Cited by 183
“The sudden failure often leads to machine breakdown with significant loss [3]–[5].”
BackgroundTool Condition Monitoring for High-Performance Machining Systems—A Review
Mohamed, A., Hassan, M., M’Saoubi, R., & Attia, H. (2022) · Sensors · doi:10.3390/s22062206 · Cited by 160
“Additionally, these models are almost shallow with limited generalization ability, which can be attributed to the limited capacity to simulate complicated nonlinear behavior of machining operations [218].”
BackgroundIntelligent fault diagnosis of rolling bearings using an improved deep recurrent neural network
Jiang, H., Li, X., Shao, H., & Zhao, K. (2018) · Measurement Science and Technology · doi:10.1088/1361-6501/aab945 · Cited by 178
“On the other hand, the extracted sensitive features usually show poor generalization ability, that is, the selected features perform well only in certain cases [19].”
BackgroundRole of artificial intelligence in rotor fault diagnosis: a comprehensive review
Nath, A. G., Udmale, S. S., & Singh, S. K. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09910-w · Cited by 172
A data indicator-based deep belief networks to detect multiple faults in axial piston pumps
Wang, S., Xiang, J., Zhong, Y., & Tang, H. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.04.038 · Cited by 177
Rolling bearing fault diagnosis based on SSA optimized self-adaptive DBN
Gao, S., Xu, L., Zhang, Y., & Pei, Z. (2022) · ISA Transactions · doi:10.1016/j.isatra.2021.11.024 · Cited by 169
Hu, Q., Si, X.-S., Zhang, Q.-H., & Qin, A.-S. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106609 · Cited by 171
Zhang, Q., & Deng, L. (2023) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-023-01616-9 · Cited by 161
“To further evaluate the performance of the proposed method, we compared the method with eight other methods: ADCNN [36], DBN Based HDN [37], Sparse filter [38], CNN [23], ResNet-DA [39], Self-CNN [40], gcForest [41], and DRL [42].”
MethodLi, X., Li, X., & Ma, H. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106825 · Cited by 173
Metadata
- Authors
- Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X.
- Affiliations
- Xi'an Jiaotong University (CN)
- University of Duisburg-Essen (DE)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-05
- Volume
- 63
- Issue
- 5
- Pages
- 3137-3147
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2317595875
- Semantic Scholar
- 2d2fe4a73c98933ae9b8df73c8452b0d8be6475e
- Cited by
- 1,191
- References
- 53
- Citations by year
- 2026: 53 · 2025: 69 · 2024: 88 · 2023: 130 · 2022: 168 · 2021: 177 · 2020: 199 · 2019: 142 · 2018: 97 · 2017: 63 · 2016: 5
- FWCI
- 85.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (51222503, 51475355, 51421004)
- Fundamental Research Funds for the Central Universities (2012jdgz01, XTD2014001)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Health Sciences › Health Professions › Health Information Management › Artificial Intelligence in Healthcare
- Keywords
- intelligent fault diagnosis, unsupervised feature learning, mechanical vibration signals, sparse filtering, two-layer neural networks, softmax regression, bearing fault classification, motor bearings
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.