The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Motor Fault Diagnostics Based on Current Signatures: A Review
Abstract
Electric motors act as the backbone of industrial development. Their reliable and safe operation is essential to various industries. At present, motor fault diagnosis based on current signatures has progressively gained favour thanks to their non-invasive nature. This review summarizes recent advances in motor current signature analysis for fault diagnosis. First, motor diagnostic background and requirements are expounded, as well as the benefits of current signature analysis. Then, the mechanism and influence of common faults for the most widely used induction motor and permanent magnet synchronous motor are analyzed, and the detection criteria for typical motor defects, such as bearing fault, stator windings inter turn short circuit, and broken rotor bar, are summarized. Next, the motor diagnosis techniques based on current signature analysis are summarized from the technical perspectives of spectrum analysis, demodulation transformation, time-frequency analysis, parameter estimation, artificial intelligence, and etc. Pros and cons of each technology are also provided. Finally, according to the challenges faced by the existing technologies in engineering, future research is suggested to focus on influence analysis of electromechanical coupling on current signal, feature extraction for incipient fault, non-stationary signal analysis, unlabeled data utilization and fault severity assessment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
The local mean decomposition and its application to EEG perception data
Smith, J. S. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0058 · Cited by 983
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors
Bonnett, A. H., & Soukup, G. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.148460 · Cited by 593
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
The detection of inter-turn short circuits in the stator windings of operating motors
Joksimovic, G. M., & Penman, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873216 · Cited by 471
DCNN-Based Multi-Signal Induction Motor Fault Diagnosis
Shao, S., Yan, R., Lu, Y., Wang, P., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2925247 · Cited by 442
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
A Motor Current Signal-Based Bearing Fault Diagnosis Using Deep Learning and Information Fusion
Hoang, D. T., & Kang, H. J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2933119 · Cited by 378
Ali, M. Z., Shabbir, M. N. S. K., Liang, X., Zhang, Y., & Hu, T. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2895797 · Cited by 349
Condition Monitoring and Fault Diagnosis of Induction Motors: A Review
Choudhary, A., Goyal, D., Shimi, S. L., & Akula, A. (2019) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-018-9286-z · Cited by 302
Drif, M., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2307013 · Cited by 235
Physics-Informed LSTM hyperparameters selection for gearbox fault detection
Chen, Y., Rao, M., Feng, K., & Zuo, M. J. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.108907 · Cited by 224
Self-citationHang, J., Zhang, J., Cheng, M., & Huang, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2388493 · Cited by 218
Rotor fault condition monitoring techniques for squirrel-cage induction machine—A review
Mehrjou, M. R., Mariun, N., Hamiruce Marhaban, M., & Misron, N. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.05.007 · Cited by 215
On-field experience with online diagnosis of large induction motors cage failures using MCSA
Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., Passaglia, R., Saottini, M., Tontini, G., Giovannini, M., & Rossi, A. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800591 · Cited by 176
Haddad, R. Z., & Strangas, E. G. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2016.2558183 · Cited by 158
Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters
Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055772 · Cited by 157
Bazan, G. H., Scalassara, P. R., Endo, W., Goedtel, A., Godoy, W. F., & Palácios, R. H. C. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.09.031 · Cited by 149
Induction Motor Diagnosis by Advanced Notch FIR Filters and the Wigner–Ville Distribution
Climente-Alarcón, V., Daviu, J. A. A., Riera‐Guasp, M., & Vlček, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2286581 · Cited by 130
An Approach on MCSA-Based Fault Detection Using Independent Component Analysis and Neural Networks
Garcia-Bracamonte, J. E., Ramírez-Cortés, J. M., Rangel‐Magdaleno, J., Gómez‐Gil, P., Barreto, H. P., & Alarcon‐Aquino, V. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2900143 · Cited by 130
Current-Residual-Based Stator Interturn Fault Detection in Permanent Magnet Machines
Hu, R., Wang, J., Mills, A. R., Chong, E., & Sun, Z. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2965500 · Cited by 120
Zhang, J., Wang, Y., Zhu, K., Zhang, Y., & Li, Y. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3067915 · Cited by 114
Diagnosis of Induction Motor Faults in the Fractional Fourier Domain
Pineda‐Sanchez, M., Riera‐Guasp, M., Daviu, J. A. A., Roger-Folch, J., Pérez‐Cruz, J., & Puche‐Panadero, R. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2031835 · Cited by 110
Empirical Mode Decomposition Analysis for Broken-Bar Detection on Squirrel Cage Induction Motors
Valles-Novo, R., Rangel‐Magdaleno, J., Ramírez-Cortés, J. M., Barreto, H. P., & Caporal, R. M. (2014) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2373513 · Cited by 109
Faiz, J., & Ojaghi, M. (2008) · Mechatronics · doi:10.1016/j.mechatronics.2008.07.004 · Cited by 108
Riera‐Guasp, M., Cabanas, M. F., Daviu, J. A. A., Pineda‐Sanchez, M., & Garcia, C. H. R. (2009) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2032622 · Cited by 97
Wei, D., Liu, K., Hu, W. J., Peng, X., Chen, Y., & Ding, R. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3167164 · Cited by 92
Self-citationRangel‐Magdaleno, J., Barreto, H. P., Ramírez-Cortés, J. M., Gómez‐Gil, P., & Caporal, R. M. (2014) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2013.2286931 · Cited by 87
Current Noise Cancellation for Bearing Fault Diagnosis Using Time Shifting
Dalvand, F., Dalvand, S., Sharafi, F., & PECHT, M. G. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2694397 · Cited by 83
Feng, Z., Chen, X., & Zuo, M. J. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2875447 · Cited by 83
Stator Short-Circuit Diagnosis in Induction Motors Using Mutual Information and Intelligent Systems
Bazan, G. H., Scalassara, P. R., Endo, W., Goedtel, A., Palácios, R. H. C., & Godoy, W. F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2840983 · Cited by 81
Chen, Y., Schmidt, S. P., Heyns, P. S., & Zuo, M. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107605 · Cited by 80
Self-citationChen, X., & Feng, Z. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106691 · Cited by 76
Motor Current Signal Analysis Based on a Matched Subspace Detector
Elbouchikhi, E., Choqueuse, V., Auger, F. A., & Benbouzid, M. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2749858 · Cited by 74
Zhang, J., Xu, Z., Wang, J., Zhao, J., Din, Z., & Cheng, M. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3009563 · Cited by 74
Rafaq, M. S., Lee, H., Park, Y., Lee, S. B., Fernández, D., Reigosa, D., & Briz, F. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3088332 · Cited by 72
Rapur, J. S., & Tiwari, R. (2019) · Measurement · doi:10.1016/j.measurement.2019.07.037 · Cited by 69
A Normalized Frequency-Domain Energy Operator for Broken Rotor Bar Fault Diagnosis
Li, H., Feng, G., Zhen, D., Gu, F., & Ball, A. D. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3009011 · Cited by 63
Rivera‐Guillen, J. R., de Santiago-Pérez, J. J., Amézquita-Sánchez, J. P., et al. (2018) · Measurement · doi:10.1016/j.measurement.2018.04.039 · Cited by 58
Allal, A., & Khechekhouche, A. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2022.108219 · Cited by 57
Chen, X., & Feng, Z. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.11.049 · Cited by 55
A Two-Step Strategy for Online Fault Detection of High-Resistance Connection in BLDC Motor
Wang, H., Lu, S., Qian, G., Ding, J., Liu, Y., & Wang, Q. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2929102 · Cited by 55
Gao, A., Feng, Z., & Liang, M. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107331 · Cited by 53
Gangsar, P., & Tiwari, R. (2018) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.4039204 · Cited by 52
Chai, N., Yang, M., Ni, Q., & Xu, D. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2821099 · Cited by 49
Aouabdi, S., Taibi, M., Bouras, S., & Boutasseta, N. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.12.027 · Cited by 48
Detection and Evaluation of the Interturn Short Circuit Fault in a BLDC-Based Hub Motor
Wang, H., Wang, J., Wang, X., Lu, S., Hu, C., & Cao, W. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3167167 · Cited by 48
Kar, C., & Mohanty, A. R. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.04.020 · Cited by 47
Application of the fuzzy min–max neural network to fault detection and diagnosis of induction motors
Seera, M., Lim, C. P., Ishak, D., & Singh, H. (2012) · Neural Computing and Applications · doi:10.1007/s00521-012-1310-x · Cited by 33
Climente-Alarcón, V., Daviu, J. A. A., Riera‐Guasp, M., Pons-Llinares, J., Roger-Folch, J., Rodriguez, P., & Arkkio, A. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.08.008 · Cited by 32
Cira, F., Arkan, M., Gumus, B., & Goktas, T. (2016) · IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2016.7793717 · Cited by 31
Wang, B., Shen, C., Xu, K., & Zheng, T. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2019.0101 · Cited by 31
Dias, C. G., da Silva, L. C., & Chabu, I. E. (2019) · Energies · doi:10.3390/en12122381 · Cited by 29
Real-Time Quality Inspection of Motor Rotor Using Cost-Effective Intelligent Edge System
Zhu, Q., Lu, J., Wang, X., Wang, H., Lu, S., de Silva, C. W., & Xia, M. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3228869 · Cited by 26
Bearing fault detection of induction motor using SWPT and DAG support vector machines
Abid, F. B., Zgarni, S., & Braham, A. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793237 · Cited by 25
A Current Signal-Based Adaptive Semisupervised Framework for Bearing Faults Diagnosis in Drivetrains
Li, J., Wang, Y., Zi, Y., Sun, X., & Yang, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3046051 · Cited by 24
Das, S. K., Purkait, P., & Chakravorti, S. (2012) · doi:10.1109/icpen.2012.6492315 · Cited by 21
Song, X., Hu, J., Zhu, H., & Zhang, J. (2018) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.22595 · Cited by 21
Park, C. H., Lee, J., Ahn, G., Youn, M., & Youn, B. D. (2019) · 2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2019.8864842 · Cited by 21
Unintrusive Monitoring of Induction Motors Bearings via Deep Learning on Stator Currents
Cipollini, F., Oneto, L., Coraddu, A., Savio, S., & Anguita, D. (2018) · Procedia Computer Science · doi:10.1016/j.procs.2018.10.503 · Cited by 19
Bouzid, M. B. K., & Champenois, G. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699575 · Cited by 14
Demagnetization Diagnosing in PMSM Based on SIDDTW Under Nonstationary Conditions
Peng, X., Peng, T., Chen, Z., Yang, C., & Tao, H. (2020) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon43393.2020.9255119 · Cited by 4
Cited by
Harmonic Distortion Indices for Experimental Characterization of Variable Frequency Drives
Arranz-Gimon, A., Morinigo-Sotelo, D., Zorita-Lamadrid, A., & Duque-Perez, O. (2024) · IEEE Access · doi:10.1109/access.2024.3474176 · Cited by 5
Metadata
- Authors
- Niu, G., Dong, X., & Chen, Y.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2023
- Volume
- 72
- Pages
- 1-19
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W4380635141
- Cited by
- 269
- References
- 64
- FWCI
- 29.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.