The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
An assessment of wide bandgap semiconductors for power devices
Abstract
An advantage for some wide bandgap materials, that is often overlooked, is that the thermal coefficient of expansion (CTE) is better matched to the ceramics in use for packaging technology. It is shown that the optimal choice for uni-polar devices is clearly GaN. It is further shown that the future optimal choice for bipolar devices is C (diamond) owing to the large bandgap, high thermal conductivity, and large electron and hole mobilities. A new expression relating the critical electric field for breakdown in abrupt junctions to the material bandgap energy is derived and is further used to derive new expressions for specific on-resistance in power semiconductor devices. These new expressions are compared to the previous literature and the efficacy of specific power devices, such as heterojunction MOSFETs, using GaN are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Power semiconductor device figure of merit for high-frequency applications
Baliga, B. J. (1989) · IEEE Electron Device Letters · doi:10.1109/55.43098 · Cited by 1,070
(2007) · Power Systems · doi:10.1201/9781420009231-29 · Cited by 767
Very-high power density AlGaN/GaN HEMTs
Wu, Y.-F., Kapolnek, D., Ibbetson, J. P., Parikh, P., Keller, B. P., & Mishra, U. K. (2001) · IEEE Transactions on Electron Devices · doi:10.1109/16.906455 · Cited by 568
Wide bandgap compound semiconductors for superior high-voltage unipolar power devices
Chow, T. P., & Tyagi, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.297751 · Cited by 487
Semiconductors for high-voltage, vertical channel field-effect transistors
Baliga, B. J. (1982) · Journal of Applied Physics · doi:10.1063/1.331646 · Cited by 470
Khan, M. A., Kuznia, J. N., Van Hove, J. M., Pan, N., & Carter, J. (1992) · Applied Physics Letters · doi:10.1063/1.106798 · Cited by 248
Self-citation(2014) · High Temperature Materials and Mechanisms · doi:10.1201/b16545-19 · Cited by 165
High voltage GaN Schottky rectifiers
Dang, G. T., Zhang, A. P., Ren, F., Cao, X. A., Pearton, S. J., Cho, H., Han, J. W., Chyi, J., Lee, C.-M., Chuo, C., et al. (2000) · IEEE Transactions on Electron Devices · doi:10.1109/16.830981 · Cited by 87
Thermal analysis of high-power modules
Godbold, C. V., Sankaran, V. A., & Hudgins, J. L. (1997) · IEEE Transactions on Power Electronics · doi:10.1109/63.554164 · Cited by 72
Self-citationSteady-state thermal conductivity measurements of AlN and SiC substrate materials
Dettmer, E. S., Romenesko, B. M., Charles, H. K., et al. (1989) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/33.49013 · Cited by 51
McCluskey, F. P., Podlesak, T. F., & Grzybowski, R. (2018) · CRC Press eBooks · doi:10.1201/9780203751978 · Cited by 21
Cited by
Ultrawide‐Bandgap Semiconductors: Research Opportunities and Challenges
Tsao, J. Y., Chowdhury, S., Hollis, M. A., Jena, D., Johnson, N. M., Jones, K. A., Kaplar, R. J., Rajan, S., Van de Walle, C. G., Bellotti, E., et al. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201600501 · Cited by 1,602
Self-citationGaN-based power devices: Physics, reliability, and perspectives
Meneghini, M., De Santi, C., Abid, I., Buffolo, M., Cioni, M., Khadar, R. A., Nela, L., Zagni, N., Chini, A., Medjdoub, F., et al. (2021) · Journal of Applied Physics · doi:10.1063/5.0061354 · Cited by 723
Perspective: Ga2O3 for ultra-high power rectifiers and MOSFETS
Pearton, S. J., Ren, F., Tadjer, M., & Kim, J. (2018) · Journal of Applied Physics · doi:10.1063/1.5062841 · Cited by 659
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Die Attach Materials for High Temperature Applications: A Review
Manikam, V. R., & Cheong, K. Y. (2011) · IEEE Transactions on Components, Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2010.2100432 · Cited by 478
Metadata
- Authors
- Hudgins, J. L., Simin, G. S., Santi, E., & Khan, M. A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2003-05
- Volume
- 18
- Issue
- 3
- Pages
- 907-914
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2119418964
- Cited by
- 610
- References
- 12
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.